Sherwood 5227-00000-041-0S User Manual

• Be sure to connect speakers firmly and
correctly according to the channel (left
and right) and the polarity (+ and -). If
the connections are faulty, no sound
will be heard from the speakers, and if
the polarity of the speaker connection
is incorrect, the sound will be unnatural
and lack bass.

■Caution

• Be sure to use the speakers with the
impedance of 6 ohms or above.

• Do not let the bare speaker wires touch
each other or any metal part of this
unit. This could damage this unit and/or
the speakers.

Placing Speakers

QUICK START GUIDE

1

Connecting Speakers

■If you have 5.1 ch speakers ■If you have 7.1 ch speakers

1. Front Left

2. Front Right

3. Center

4. Surround Left

5. Surround Right

6. Subwoofer

7. Surround Back Left

8. Surround Back Right

• This guide shows you how to connect your speakers and DVD player and enjoy multi-channel surround sound.

• For full details on using this unit, refer to the main operating instructions.

• Please be certain that this unit is unplugged from the AC outlet before making any connections.

Connecting TV & DVD Player

QUICK START GUIDE

2

• There are three types of video jacks (COMPONENT, S-VIDEO, (composite) VIDEO) for analog video connections
and the HDMI connector for digital video and audio connections.

Connect them to the corresponding video jacks according to their capability.

• For your reference, the exellence in picture quality is as follows : "HDMI" > "COMPONENT" > "S-VIDEO" > "(com-

posite) VIDEO".

• When making COMPONENT VIDEO connections, connect "Y" to "Y", "P

B/CB" to "CB" (or "B-Y", "PB") and "PR/CR"

to "C

R" (or "R-Y", "PR").

• The HDMI connection can carry uncompressed digital video signals and digital audio signals.

■Connecting a TV

• Connect the TV to the same type of Monitor video output that you did connect to the DVD player, as shown.

■Connecting a DVD Player

• Use a Component, S-video or (composite) video cable to connect this unit's VIDEO 2 to the corresponding video

output on your DVD player, as shown.

• Use an Optical or Coaxial cable to connect this unit's OPT IN 2 or COAX IN 2 to the optical output or the coaxial

output on your DVD player. (You don't need to do both.)

• Use an Audio (analog) cable to connect this unit's VIDEO 2 (L/R) to audio output on your DVD player.

• Use a HDMI cable to connect this unit's HDMI 2 to HDMI output on your DVD player.