SHEL LAB High Heat Auto Decontamination CO2 Incubator
SCO6AD_Broch
ure
SCO Series: SCO6AD
Ideal for Clinical, Analytical, and General Laboratory Applications
The SCO6AD unit provides an optimized culturing environment with passive humidification, highly stable CO2 levels, and tight
temperature uniformity to safeguard your cell sample populations.
Features and Benefits
Copper gas plumbing, a high-heat auto decontamination cycle, and a glass viewing door gives the SCO6AD enhanced protection
against microbiological contamination.
2
5
6
1
4
7
3
10
8
9
+
Infrared (IR) sensor for quick recovery
of CO2 levels after door openings. This
sensor does not need to be removed
during the high-heat decontamination
cycle.
+
USB data logging capabilities.
Advanced PID temperature control
1
system for sensitive response.
2
Independent over temperature set
point and operational control override
for additional safety.
3
Side-mounted access port, 1.5" inner
diameter (3.81cm) for independent
cables, sensors, and instrumentation.
1 • Sheldon Manufacturing, Inc. • www.shellab.com • SCO6AD Unit
4
Stainless steel interior construction
for long life operation, easy cleaning.
5
Heated Copper CO2 inlet to promote
temperature uniformity and reduce the
risks of contamination and condensation.
6
Autoclavable shelving system.
7
Auto decontamination cycle designed to
stop microbial contamination caused by
mycetozoa, yeast, viruses, bacteria, and
a variety of other microorganisms.
8
Heated door to ensure superior
temperature uniformity.
9
Sealed inner glass door allows
for viewing without disturbing the
critical growth atmosphere and
allows for improved gas utilization
and condensate reduction.
Unique air jacketed design provides
10
excellent temperature uniformity of
+/-0.25°C at 37 °C.
+
Safety certified CAN/CSA, UL, EN,
IEC 61010, and compliant with CE.
Made in the USA
Contamination Control
Extensive use of copper in the CO2 sample port, humidity reservoir, and
heated CO2 feed line adds reassurance that foreign microbes will not
aect test results. Cleanup is a breeze with the all stainless steel chamber,
coved corners, and autoclavable door gasket. Optional copper shelves
are available for additional contamination control.
Applications:
• Cell Culture
• Tissue Culture
• Food Analysis
• Stem Cells
• Microbiology
• Plant Cell Culture
Sheldon Manufacturing, Inc. • www.shellab.com • SCO6AD Unit • 2
Control, Feedback, and Monitoring
The advanced PID (proportional, integral, derivative) controller commands proportional power to the heating elements and CO
injection frequency to provide the most accurate and responsive control. Each controller is matched to the incubator chamber
volume to assure faster response to setpoint without overshoot, and quicker recovery following door openings. Indicator lights
are included for visual status feedback on critical functions.
Integrated Control Panel
All controls are centrally located on the main panel including manual power, independent over temperature control, digital
temperature/CO2 adjustments, and indicator lights for all functions.
CO2 Setpoint
data entry, 0.1% increments
Over Temperature
Main Power
on/o switch
setpoint dial
Over Temperature
indicator light
Temperature Setpoint
data entry, 0.1°C increments
Decontamination
cycle switch
Operation Selector
selection switch
2
SCO6AD Unit Specification Chart
SCO6AD
Interior Volume, Nominal 5.9 cu.ft. (167 liters)
Interior Dimensions W x H x D
Exterior Dimensions W x H x D
Interior Construction 300 series stainless steel
Exterior Construction
Shelves (See Accessories)* 3 standard, 8 total
Maximum Weight Per Shelf* 35 lbs/15.8kg
Permitted Total Load 105 lbs/47.6kg
*Extra standard and reinforced shelves available. See Accessories.
Sheldon Manufacturing, Inc. • www.shellab.com • SCO6AD Unit • 3
20.2" x 25.5" x 20.0"
51.3 x 64.7 x 50.8cm
28.5" x 39.5" x 30.8"
72.4 x 100.3 x 78.2cm
20 gauge steel,
powder coated
SCO6AD Unit Information Chart
SCO6AD
Order Model Number, Voltage Specific SCO6AD SCO6AD-2
Electrical, 50/60Hz, AC, 1Ø
Voltage 110V-120V 220V-240V
Full Load Amps 12 6.0
Nominal Power (watts @37°C) 130 110
Recommended Breaker, Amps 15 15
Power Cord Supplied NEMA5-15P EU1-16P
CO2 Range 1-20% 1-20%
Recovery CO2 at 5%* < 5min. < 5min.
Sensor Type
Infrared Infrared
Temperature Uniformity
At 37°C ± 0.25°C ± 0.25°C
Humidity Range Passive (Ambient 95%)
ü ü
Temperature Range Recovery 37°C*
Recovery to 37°C after 30 sec. Door Opening 6.0 min. 6.0 min.
To 98% of set value.
*
DIN 12880 Compliance
SHEL LAB SCO6AD High Heat Decontamination CO2 Incubator is designed to meet or exceed the performance criteria
established through DIN 12880:2007:05 and ASTM E1292-94 (Reapproved 2006.).
Note: DIN 12880 is an international standard for measuring the performance of electrical laboratory ovens and incubators based
on Deutsches Institut Fur Normung E.V. (German National Standard), 05/01/2007.
Sheldon Manufacturing, Inc. • www.shellab.com • SCO6AD Unit • 4
Site Preparation and Installation Guides
SCO6AD
Wall Clearance, Sides 4.0" (10.0cm)
Wall Clearance, Roof 2.0" (5.0cm)
Access Port (Inner Diameter) 1.5" (3.81cm)
Unit Weight Empty 136 lbs (61.7kg)
Shipping Weight 302 lbs (137kg)
Options and Accessories
SCO6AD
Shuttle Valve for Dual CO2 Tanks 912-950-0012
4-20 mA outputs for CO
Locking Outer Door: SCO6AD, SCO6AD-2 912-952-0021, 912-952-0027
Tri-Glass Door 912-952-0030
Stacking Stand 9000575
Caster Platform 9000574
Copper Shelf Package: Includes 3 copper shelves, 6 copper shelf slides 9750582
Extra Shelf, Copper, Max Weight 35 lbs (15.8kg) 5820504
Extra Slide, Copper, 2 Required Per Shelf 5820505
Extra Stainless Steel Shelf and Slide Kit, Max. Weight 35 lbs (15.8kg) 9751235
Extra Shelf, Reinforced. Max. Weight 50 lbs (22.7kg) 912-975-0004
Extra Standard, Stainless Steel, 2 Required Per Shelf 5170646
Extra Slide, Stainless Steel, 2 Required Per Shelf 5121528
Options must be specified when ordering. Contact SHEL LAB for additional information.
2
912-950-0013
fications subject to change without notice. @2016 Sheldon Manufacturing P/N 0740559.
. • Speci
Sheldon Manufacturing, Inc. • www.shellab.com • SCO6AD Unit • 5
Sheldon Manufacturing, Inc.
300 N. 26th Avenue • PO Box 627 • Cornelius, OR 97113 USA
+1 503-640-3000 • www.shellab.com • sales@shellab.com
OW10854
Loading...