Shear Tech LE-5900 User Manual

LINEAR ENDORSER

LE-5900

USER’S MANUAL

Ver. 1.5c

SHEAR TECH

9424 ETON AVE UNIT H, CHATSWORTH, CA 91311, U.S.A

TEL: [phone]

FAX: [phone] http://www.sheartech.net

Proprietary Information - this material is not to be reproduced by any means or disclosed in any way without prior written approval by Shear Tech.

Disclaimer - this material is subject to changes without notice and should not be construed as a commitment by Shear Tech. Neither express nor implied warranty is made regarding the procedures herein, their merchantability, or fitness for any specific application.

This material is provided solely on an “as-is” basis, and the customer agrees to assume any cost arising from use or misuse of the material, including all correction and damages, consequential or incidental.

Shear Tech 2005

Shear Tech LE-5900 Linear Endorser Operating Manual.

Table of Contents
INTRODUCTION.............................................................................................................	2
SETTING UP THE LE-5900 ...........................................................................................	2
HARDWARE FEATURES ..............................................................................................	2
INKJET PRINTER ......................................................................................................................	2
DOCUMENT HANDLING.........................................................................................................	2
KEYBOARD ...............................................................................................................................	2
DISPLAY ....................................................................................................................................	2
REAL TIME CLOCK..................................................................................................................	2
KEYBOARD LAYOUT ...................................................................................................	3
MENU NAVIGATION SYSTEM ...................................................................................	3
MAIN (MODE) MENU...............................................................................................................	3
SYSTEM SETUP ..............................................................................................................	4
SYSTEM SETUP MENU............................................................................................................	4
CLOCK SETUP...........................................................................................................................	4
FORMATTING.................................................................................................................	5
EDITING AN ENDORSEMENT LINE......................................................................................	5
ENDORSEMENT LINE PROPERTIES .....................................................................................	6
FONTS.........................................................................................................................................	6
VARIABLES ...............................................................................................................................	7
SYSTEM EVENTS .....................................................................................................................	8
EDITING MODE OPTIONS (SUMMARY) ............................................................................	10
DIFFERENT WAYS TO EXIT EDITING................................................................................	11
ENDORSING MODE.....................................................................................................	12
OPTIONS MENU OF THE ENDORSING MODE ..................................................................	13
ENDORSEMENT FORMAT EXAMPLE ................................................................................	14
COUNTING MODE .......................................................................................................	15
SPLITTING MODE .......................................................................................................	15
CLOCK MODE ..............................................................................................................	15
BOOT MANAGER.........................................................................................................	16
SPECIFICATIONS.........................................................................................................	16
APPENDIX

- 1 -

Shear Tech LE-5900 Linear Endorser Operating Manual.

INTRODUCTION

The LE-5900 is a keyboard programmable tabletop inkjet Linear Endorser with an integrated auto-feeder. It offers high print quality and fast printing speed. Besides the main endorsing mode, the LE-5900 has two other useful modes (Counting and Splitting). An integrated system clock allows inserting of current date and time into the custom endorsing line. Five font types are available and can be selected anywhere within the line. Up to five variables can be placed into the endorsing line and configured as Date/Time, Prompt or Counter.

SETTING UP THE LE-5900

Carefully remove all items from the box.

In addition to this User‟s Manual, you will find the following items in the box:

·	LE-5900 unit	· Stacker
·	AC Power Cord	· One Knurl Head Screw

 Ink Cartridge (needs to be installed)

Install the Ink Cartridge (see “Inkjet Cartridge Replacement” drawing).

Place the stacker on the left side of the machine and secure it with the knurl head screw.

Plug the power cord into the AC power receptacle on the back of the endorser unit. Insert the other end of the power cord into a wall outlet.

Turn the power switch “ON” on the back of the printer unit.

HARDWARE FEATURES

Inkjet Printer

The LE-5900 utilizes inkjet printing technology to print information on a document.

Document Handling

All documents enter the endorser through the integrated auto-feeder. If a document jam occurs, process is aborted and the operator is notified.

Keyboard

Keyboard is divided into two groups of keys Alpha/Numeric and Functional.

Display

Descriptive messages on the display indicate processing conditions and provide error notification. All data entries are displayed. This allows the operator to verify and correct an entry before pressing functional key.

Real Time Clock

The system incorporates a power independent real time clock, which provides current Date and Time on the Display or Inkjet Printer.

- 2 -

Shear Tech LE-5900 Linear Endorser Operating Manual.

KEYBOARD LAYOUT

MODE		STOP
		CLEAR





(NO)

(YES)

1

2

3

4

5

S

OPT

T

SYMB

ABC

DEF

GHI

JKL

A

R

6

7

8

9

0

DEL

__T__

MNO

PQRS

TUV

WXYZ

SPACE

ENTER

Figure 1. Keyboard Layout

MENU NAVIGATION SYSTEM

The menu-driven software of the LE-5900 allows the user to navigate through the entire application by selecting menu options without memorizing them. Once a menu is displayed, use [] and [] keys to scroll menu options. When desired option is displayed, press the [ENTER] key to accept an option or the [CLEAR] key to quit the menu.

The top-level menu is the Mode Menu.

Main (Mode) Menu

The Mode Menu can be activated by pressing the [MODE] key anytime where the software allows mode switching.

Starts Endorsing Mode.

Starts Counting Mode.

Starts Splitting Mode.

Displays the Clock.

Starts Formatting Mode.

Starts System Setup.

Select Mode:

[],[] - scrolls options. [ENTER] - selects option.

Endorsing

Counting

Splitting

Clock

Formatting

System Setup

- 3 -

Shear Tech LE-5900 Linear Endorser Operating Manual.

SYSTEM SETUP

System Setup Menu

The System Setup Menu allows us to make changes in the system configuration.

					Reset To Default – resets system configuration
		Setup Options:
					parameters to factory defaults.
	[],[] - scrolls options.
					StartUp Mode – allows selecting one of the startup
	[ENTER] - selects option.
					options (Show Prompt, Endorsing, Counting, Splitting or
		Reset To Default
		StartUp Mode			Last Used). This selection determines whether one of the
		StartUp Line			modes will start automatically or you will be prompted to
		Default Speed			select one manually on power up.
		Default Margin
					StartUp Line – allows selecting endorsing line, which
		Clock Setup
					will be loaded automatically after switching into the
		Ink Level
		New Cartridge			Endorsing mode.
		Exit			Default Speed – allows selecting default endorsing
					speed.

Default Margin – allows selecting default margin size (space from the last character to the right edge of a doc.)

Ink Level – allows monitoring current level of ink left in the ink cartridge. New Cartridge – allows manually reset an ink counter.

Each Endorsing Format Line has its own Speed and Margin properties that will be used by the software unless the Default option is selected.

Clock Setup – allows changing Date/Time.

Clock Setup

After selecting the Clock Setup option from the System Setup menu, the prompt:

Clock String: => _

will appear.

Enter the Clock string in the following format: < YYMMDDWHHMMX > Example: need to set following date and time (03/21/2005 09:34AM):

YY	Year	2005	05	– 2-digits
MM	Month	03 (March)	03	– 2-digits
DD	Date	21	21	– 2-digits
W	Day	2 (Monday)	2	– 1-digit
HH	Hours	09	09	– 2-digits
MM	Minutes	34	34	– 2-digits
X	AM/PM	0 (AM)	0 – 1-digit

- 4 -