Sharper image SBT607 User Manual

Name: Sharper image SBT607
Brand: Sharper image
SKU: 2588076
Rating: 5 (1 reviews)

5 (1)

Charging the Bluetooth SpeakerCharging the Bluetooth Speaker

Pairing the speaker with a Bluetooth

enabled device

Pairing the speaker with a Bluetooth

enabled device

In the boxIn the box

User Guide

Legal informationLegal information

Limited Warranty

The screenshots above are typical of many Bluetooth

enabled devices in the market today, and are used

to assist in the explanation of the pairing process.

Your Bluetooth enabled device’s interface and

interaction with the Bluetooth Speaker may

slightly dier from the illustrations above.

Should you have any questions or problems concerning this

product, please contact our customer service department at:

TO OBTAIN WARRANTY SERVICE:

● Call the Customer Support number located below, or go

to our website portal to receive an SRO number.

● Provide proof of the date of purchase within the package

(Dated bill of sale).

● Prepay all shipping costs to the authorized service center,

and remember to insure your return.

● Include a return shipping address (no P.O. Boxes), a

telephone contact number, and the defective unit within

the package.

● Describe the defect or reason you are returning the

product.

Your product will be repaired or replaced, at our option, for

the same or similar model of equal value if examination by

the service center determines this product is defective.

Products received damaged as a result of shipping will

require you to le a claim with the carrier.

The shipping address of the authorized service center is:

 Southern Telecom, Inc.

Attention: Customer Service (2nd Floor)

14-C 53rd Street

Brooklyn, NY 11232

90 Days Limited Warranty

In the unlikely event that this product is defective, or does

not perform properly, you may within ninety (90) days from

your original date of purchase return it to the authorized

service center for repair or exchange.

Caution: Any changes or modications not expressly approved

could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to part 15 of the FCC

Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy

and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to

radio or television reception, which can be determined by turning

the equipment o and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from

that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Warranty service not provided

This warranty does not cover damage resulting from

accident, misuse, abuse, improper installation or operation,

lack of reasonable care, and unauthorized modication. This

warranty is voided in the event any unauthorized person

opens, alters or repairs this product. All products being

returned to the authorized service center for repair must be

suitably packaged.

Limitation of Warranty:

• THE WARRANTY STATED ABOVE IS THE ONLY WARRANTY

APPLICABLE TO THIS PRODUCT. ALL OTHER WARRANTIES,

EXPRESS OR IMPLIED (INCLUDING ALL IMPLIED WARRANTIES

OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR

PURPOSE) ARE HEREBY DISCLAIMED. NO VERBAL OR

WRITTEN INFORMATION GIVEN BY AIT, INC. IT’S AGENTS, OR

EMPLOYEES SHALL CREATE A GUARANTY OR IN ANY WAY

INCREASE THE SCOPE OF THIS WARRANTY.

• REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS

WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER.

AIT, INC. SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSE-

QUENTIAL DAMAGES RESULTING FROM THE USE OF THIS

PRODUCT OR ARISING OUT OF ANY BREACH OF ANY

EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT. THIS

DISCLAIMER OF WARRANTIES AND LIMITED WARRANTY ARE

GOVERNED BY THE LAWS OF THE STATE OF NEW YORK.

EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW,

ANY IMPLIED WARRANTY OF MERCHANTIBILITY OR FITNESS

FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED

TO THE APPLICABLE WARRANTY PERIOD SET FORTH ABOVE.

Some states do not allow the exclusion nor limitation of

incidental or consequential damages, or limations on how

long an implied warranty lasts so the above limitations on

exclusions may not apply to you. This warranty gives you

specic legal rights, and you also may have other rights that

vary from state to state.

SBT607

User Guide

Bluetooth Speaker

Location of ControlsLocation of Controls

Troubleshooting TipsTroubleshooting Tips

SBT607

User Guide

Bluetooth Speaker

1. Make sure the Wireless Speaker is turned on.

2. A tone and voice will sound, indicating that the

speaker is in pairing mode, and the LED mode

indicator light will quickly ash blue.

3. Keep your Wireless Speaker and Bluetooth

enabled device within 3 feet of each other during

the pairing process.

4. Set your mobile phone or other Bluetooth enabled

device to search for Bluetooth devices.

NOTE: You can also adjust the volume from your

mobile phone’s volume control.

Most media enabled smart phones will display

“Connected to phone audio and media” when

connected to the Wireless Speaker. This means

you can make phone calls and enjoy your music.

To enjoy wireless music on your Bluetooth Speaker,

make sure you are connected to a Bluetooth enabled

device. Once connected you can press PLAY on your

Bluetooth device or you can press the [ / ] button

on the Bluetooth Speaker. Once playback has begun,

you can control the music from the control buttons of

the Bluetooth speaker (with devices that have the

AVRCP Bluetooth prole).

You can also adjust the volume from your mobile

phone’s volume control.

Adjusting the volume

• Quickpress the [ + ] button to gradually increase

the volume; press and HOLD it to continually

increase the volume to maximum level.

• Quickpress the [ - ] button to gradually decrease

the volume; press and HOLD it to continually

decrease the volume to maximum level.

Play/Pause

• Quickpress the [ / ] button to pause the

music. To resume music playback, quickpress the

[ / ] button again.

Skipping Songs

• Quickpress the [ ] button twice to skip to previous

song; quickpress once to go to beginning of song;

press and HOLD to scroll through playlist.

• Quickpress the [ ] once to skip to next song; press

and HOLD to scroll through playlist.

1. Make sure your Bluetooth device supports A2DP

prole.

2. Turn up the volume on your Bluetooth device.

3. You may have to unpair the speaker, then re-pair to

your device.

1. Make sure the Bluetooth Speaker is turned ON

before beginning the pairing process.

2. Keep your Bluetooth Speaker and Bluetooth

enabled device within 3 feet of each other during

the pairing process.

3. Check that YOUR device’s Bluetooth feature is

turned ON.

4. Try repeating the pairing process, see “Pairing the

speaker with a Bluetooth enabled device”.

My Bluetooth device is not able to pair with the

Bluetooth Speaker.

I can pair the Bluetooth Speaker with my Bluetooth

enabled device, but I cannot hear any music.

Make sure the Bluetooth Speaker is turned ON before

beginning the pairing process.

2. A tone and voice will sound, indicating that the

speaker is in pairing mode, and the LED mode

indicator light will blink blue.

The speaker is now in pairing mode.

I cannot get the Bluetooth Speaker into Pairing mode.

1. [ ] button: quickpress twice to skip to previous

song; quickpress once to go to beginning of song;

press and HOLD to scroll through playlist

2. [ + ] button: quickpress to gradually increase

volume; press and HOLD to continually increase

volume

3. [ - ] button: quickpress to gradually decrease

volume; press and HOLD to continually decrease

volume

4. [ / ] button: press and HOLD to turn ON/OFF;

quickpress to pause/play music

5. [ ] button: quickpress once to skip to next

song; press and HOLD to scroll through playlist

6. LED mode indicator light

7. Microphone

8. Charging indicator light

9. Micro USB charging port

10. LINE IN: AUX input

3.5 mm AUX

Cable

Micro USB

Charging Cable

Customer Support:

Phone: 1-877-768-8481

Monday-Friday 8AM-10PM(EST)

www.southerntelecom.com

Click on “Product Support”

If there are no paired devices in range when

the speaker is turned on, it will go into

pairing mode automatically. If a paired

device is in range, the speaker will connect

to it automatically.

Using as wired speakersUsing as wired speakers

When in LINE IN mode, only the volume can

be controlled by both the buttons on the

speaker and the connected external device.

You must use your connected external

device to control playback when wired.

Using your Bluetooth SpeakerUsing your Bluetooth Speaker

Playing MusicPlaying Music

Micro USB

Charging Cable

1. Connect the small end of the Micro USB Charging

Cable to the the Micro USB charging port on the

back of the speaker.

2. Connect the other end of the Micro USB Charging

Cable to your computer’s USB port.

3. The Charging Indicator Light on the end of the

speaker lights up RED when charging, and shuts o

when fully charged.

Make sure you charge the speaker for at least 2

hours before using it for the rst time.

Micro USB

Charging Port

Answering/Ending a call

• To answer a call, quickpress the [ / ] button.

• To end a call, quickpress the [ / ] button.

within 3 feet

Sharper Image® name and logo are registered trademarks. Manufactured and

On an iPhone

• Go to SETTINGS > GENERAL > BLUETOOTH

(Make sure Bluetooth is turned ON)

On a Blackberry

• Go to SETTINGS/OPTIONS > BLUETOOTH

• Enable BLUETOOTH

Bluetooth:

Discoverable:

Paired Devices

SBT607

Bluetooth

Yes

Add New Device

Paired

Bluetooth

General

Bluetooth

SBT607

Devices

Now discoverable

12:12 PM

On an Android Phone

• Go to SETTINGS > BLUETOOTH > MENU >

Search for devices (Make sure Bluetooth is

turned ON)

Bluetooth settings

Bluetooth devices

Scanning

Bluetooth

Device name

SBT607

Visible

Search for devices

Make device visible

12:12 PM

On other Cell Phones/Devices

• Review the instruction manual that came

with your phone/device.

Searching for devices

Paired Devices:

1 f

ound

Stop

*Empty *

Bluetooth: Enabled

5. When the Bluetooth enabled device nds the

speaker, select SBT607 from the list of found

devices.

6. If required, enter the password 0000. Select OK

or Yes to pair the two units.

7. After a successful registration, a tone and voice

will sound and the LED mode indicator light will

slowly blink blue.

NOTE: If you would like to connect the speaker to

another device, you must unpair the speaker from

the currently paired device rst. To disconnect and

automatically enter pairing mode, press the [ ]

and [ ] buttons simultaneously.

Powering ON/OFF

• To turn ON, press and HOLD the [ / ] button for 3

seconds.

• To turn OFF, press and HOLD the [ / ] button for

3 seconds.

Adjusting the volume

• Quickpress the [ + ] button to gradually increase the

volume; press and HOLD it to continually increase the

volume to maximum level.

• Quickpress the [ - ] button to gradually decrease the

volume; press and HOLD it to continually decrease

the volume to maximum level.

Connect one end of the included 3.5mm AUX cable to

the LINE IN auxiliary input on the bottom of the

speaker and the other end to an external device’s

headphone jack (such as a smartphone, tablet, or MP3

player). The LED mode indicator light will stay solid

RED.