Sharp YO-P5B User Manual

ON

OFF

@

@

ALARM

A 12–00

CAPS2nd

CAPS1

NAME ?

E-mail

h arpsec. com

–

1

CAPS2nd

NUMBER?

2–3456–7890

3456–7891

–

1

SCHEDULE?

CAPS

MEMO?

CAPS2nd

UN I ONBANK

01
272–0011223

–

CAPS

NYC SAT

1– 1–2005

A 12–00–00

2nd

#

NOTICE

RESET switch
(on the back of the unit)

Stylus

Display

Touch Keyboard section

Mode keys

• In this manual, these Mode keys are represented with icons in parentheses.

Power ON/OFF key

2nd Function key

Activates the second function specifically assigned to
the next key tapped.

(

E S

)

:

English-Spanish word translator mode key

(

GAME

)

: Game mode key

(

TEL/SCHED/MEMO

)

:

Telephone/Schedule/Memo mode key

(

CLOCK

)

:

Home Clock/World Clock mode key

(

CALC/CONV

)

: Calculation/Conversion mode key

(

ENTER

)

: Enter key

(

)

: Search keys

Key Assignments

• SHARP strongly recommends that separate
permanent written records be kept of all important
data. Data may be lost or altered in virtually any
electronic memory product under certain
circumstances. Therefore, SHARP assumes no
responsibility for data lost or otherwise rendered
unusable whether as a result of improper use,
repairs, defects, battery replacement, use after the
specified battery life has expired, or any other
cause.

ELECTRONIC ORGANIZER

YO-P5B

OPERATION MANUAL

• SHARP assumes no responsibility, directly or
indirectly, for financial losses or claims from third
persons resulting from the use of this product and
any of its functions, such as stolen credit card
numbers, loss or alteration of stored data, etc.

• The information provided in this manual is subject to
change without notice.

Part Names

3. Using World clock

1. Tap h once or twice to display the World clock

(without “

2. Tap or to select the desired city.

”).

4. Changing the cities between Home
and World clocks

You can change the home city for a city in another time
zone without adjusting the stored correct time.

1. Tap h once or twice to display the World clock

(without “

2. Tap

as the new home city.

3. Tap f e to change the cities between Home

and World clocks.

• The previous home city is now set as the world

4. Tap h to check the home city.

• The selected city in step 2 is set as the home city

5. Tap h to recheck the world city, and tap

or to select the new world city, if needed.

”).

or and select the desired city to be set

city (without “

(with “

”).

”).

5. Setting daylight saving time (DST:
summer time)

1. Tap h once or twice to display the Home or the

World clock.

2. Tap C.

“#” is displayed. The time is set 1 hour ahead. To
clear DST, tap C to clear “#”. The time is set 1
hour behind.

Notes

• DST can be set independently in either Home or

World clock.

• When DST is set for one world city, it is used for all

cities displayed in World clock.

6. Setting alarms

The Organizer has 3 types of alarms:

1. Daily alarm .............. beeps every day at the alarm

2. Hourly alarm ........... beeps every hour when

3. Schedule alarm ....... beeps at the time for all the

Tap any key to stop the alarm beeping.

Setting/Changing the daily alarm time

1. Tap h once or twice to display Home clock

(with “

2. Tap

to display the

daily alarm screen.

(The display differs
between the 12-hour
and 24-hour clock.)

3. Tap f e.

4. Enter the time.

5. Tap x.

• The daily alarm time is set.

Tur ning the alarms on and off

An alarm sounds only when the respective symbol
(

, or

,

Display Home clock (tap h once or twice) and tap

to display the daily alarm screen.
Each time you tap
displayed, the combination of symbols switches.

Note

• Alarms sound even when the Organizer is turned off.

time (for 1 minute), when
“

” is turned on.

minutes reach “00”, when

” is turned on.

“

schedule entries (for 1
minute), when “
turned on. (Refer to
“Schedule Mode”.)

”).

) is turned on.

while the daily alarm screen is

” is

Using the Organizer for the First Time

Be sure to perform the following operations before
using the Organizer for the first time.

1. Remove the isolating film that is affixed to the
battery holder on the back of the unit.

2. Press the RESET switch with a stylus.
“RESET?” is displayed.

3. Tap f , then x to initialize the Organizer.
After “RESET!” is displayed, Home clock is
displayed. (See “Clock Mode”.) You have now
cleared the memory contents.

Changing the Guidance Language

Guidance messages can be displayed in 5 languages –
English, Italian, German, French, and Spanish. After
initializing the Organizer, the default setting is English.

Entering Characters

Touch Keyboard

Alphabet entry mode Number entry mode

NOTES

• If the Organizer is subject to strong, extraneous
electrical noises or shocks during use, an abnormal
condition may occur in which no keys (including
) will respond. Press the RESET switch, tap f ,
then x to delete all the memory contents.

•To minimize battery consumption, the Organizer is
designed to automatically turn off when no key has
been tapped for approximately 7 minutes.

• The key touch tone is turned on and off by tapping
h !, select “KEY TONE” using
and tap x. Select ON/OFF using

tap x. When the tone is activated, “
appear.

To change the language, tap h !, select
“LANGUAGE” using k or m , and tap x. Select the

desired language using

•To enter a letter with an accent mark, tap the relevant
key shown below repeatedly after tapping s.

or , then tap x.

or ,

or , then

” will

Telephone Mode

Telephone mode is composed of two directions of
storage memory. Tap

“2” on the display.
Use these files for convenience, e.g. business
and private files.
A telephone entry consists of name, address,
E-mail address, web address (URL) and number fields.

to select “1” and

Storing telephone entries

1. Tap
several times to display
the Telephone mode
screen.

2. Enter name, e.g. SMITH @ ROBERT, and tap
x.

3. Enter address, e.g. f 18 @ f EAST
@ ROAD, and tap x.

4. Enter E-mail address,
e.g. SROB s l
(to enter “
SHARPSEC.COM, and
tap x.

• The E-mail address is automatically entered in

lowercase letters.

•To enter “

5. Enter web address (URL), e.g.
WWW.SHARPUSA.COM, and tap x.

”)

”, simply tap @ instead of s.

Schedule Mode

Schedule mode is used for storing schedule details (36
characters or under), date and time (year, month, day,
hour, and minute).
In the 1st line the same characters are allowable as in

Telephone mode.

1. Storing schedule entries

1. Tap
several times to display
the Schedule mode
screen.

2. Enter the details and tap x.

3. Enter the date and time.

• The types of date and time are the same as the

types set for the clock.

•To enter a single-digit date or time, enter “0” and

the digit (e.g. “O2”).

6. Enter phone number,
and fax number if
needed, e.g.

012-3456-7890 m

f F @ @
@ f 3456-7891, and tap x.

• “STORED!” appears briefly, then the Telephone mode

screen is displayed. The telephone entry is now
stored.

Field

The 1st line:
Name, address,
E-mail address
and web address
(URL)

The 2nd and the
3rd lines:
Phone number

Notes

• The symbol “NAME”, “ADDRESS”, “E-mail”, or

“URL” is turned on while entering in each field.

•To skip entry of an address, E-mail address, web

address (URL), or number, tap x when
“ADDRESS?”, “E-MAIL?”, “URL?”, or “NUMBER?”
is displayed. However, entry must be made at the
"NAME?" field.

4. Tap x to store in the memory.

Notes

• Schedules for the following dates can be stored:

January 1901 to December 2098.

• If an attempt is made to store an entry without a date

or time, or with an invalid date or time, “ERROR!”
appears briefly. Enter the correct date and time and

tap x.

Number of
characters

36 characters
or under

Allowable

characters

Alphabetic let­ters, numbers,
symbols, “+ – × ÷
.”, space

Numbers, space,
–, F (Fax), P
(Pager)

2. Alarm for Schedule mode

When the schedule alarm (“ ”) is turned on, it is
set for all the schedule entries. Beeping sounds for 1
minute when the time for a schedule entry is reached.
Tap any key to stop the alarm. The schedule alarm
cannot be set for an individual entry.

• Each time f is tapped, the touch keyboard

switches between the Alphabet entry mode and the
Number entry mode.
To tap the touch keys, use the attached stylus.

•Tap towards the center of each key.

• Numbers, alphanumeric letters, symbols, and “+ – ×
÷ .” can be entered into the dot display area (the 1st
line).

• Numbers and some characters (only space, –,
F, and P in Telephone mode) can be entered into the
number display area (the 2nd and the 3rd lines).

• Letters are entered in capital letters (“CAPS” is
turned on). To enter lowercase letters, tap $ to
turn “CAPS” off.

Entering symbols and letters with an accent mark

•To enter a symbol, tap s repeatedly until the
desired symbol appears:

@#$£¥

( )~’: /\_&<>ß!?

V

¡¿æµ¢

• Activate “CAPS” on to enter capitalized letters.

Making corrections

Move the cursor to the character to be corrected.
Enter the correct character to replace the previous one.

Cursor

The cursor (_) indicates the position for entering a
character. Move the cursor with the cursor keys (l j
k m).

Inserting characters

Each time i is tapped, a space is inserted at the
cursor position to allow character entry.

Deleting characters

Tap d to delete the character at the cursor position.
Tap c to clear all the characters you have entered
and yet to be stored.

Clock Mode

Home clock

Home city
(with “

Date
Time

Each time h is tapped, the clock switches
between the Home clock and the World clock mode.

(For World clock, “

Daylight saving time set
( with “

#”)

”)

” is not displayed.)

Day of the week

1. Before setting the clock

• The default setting for the date is “MM/DD/YYYY”
(month-day-year). To change the setting to “YYYY/
MM/DD” (year-month-day) or “DD/MM/YYYY” (day­month-year):

1. Tap h once or twice to display the Home

clock (with “

2. Tap !, select “DATE SET” by using k or m ,

and tap x.

3. Tap

4. Tap x to store the new setting.

•To change the 12-hour clock to the 24-hour clock,
tap Z (“A” or “P” is cleared). Each time Z is
tapped, the clock switches.

• For daylight saving time/summer time, tap C in
advance (“#” is displayed on the left side of the day

of the week).

2. Setting the clock

1. Tap h once or twice to display the Home

clock (with “

2. Tap f e to start setting.

The cursor starts to flash on the city name.

3. Tap

time zone. (Refer to the list of cities described
below.)

”).

or to select the desired type.

”).

or to select the city representing your

• Enter the city name, if needed (6 characters or
under). Only one changed name for Home clock
can be stored.

4. Tap m to move the cursor to the month.

5. Enter the month, the day, and the year (4 digits ).

• The built-in calendar extends from January 1st,
1901, to December 31st, 2098.

6. Tap ( to select “A” (morning) or “P”

(afternoon) for the 12-hour clock.

7. Enter the time (hours and minutes).

Note:

P12-00: noon, A12-00: midnight

8. Tap x. The clock starts from “00” seconds.

Notes

•To enter a single-digit date or time, enter “0” and the
digit (e.g. “02”).
If you enter an invalid date or time, “ERROR!” appears

•
briefly. Enter the correct date and time and tap x.

Zone Display

No. No.

0 TNG TONGA 10 MOW MOSCOW
1 WLG
2 NOU NOUMEA 12 PAR PARIS
3 SYD SYDNEY 13 LON LONDON

3.3 ADL ADELAIDE 14 AZO
4 TYO TOKYO 15 –2H
5 HKG
6 BKK BANGKOK 17 CCS CARACAS

6.3 RGN YANGON 18 NYC NEW YORK
7 DAC DHAKA 19 CHI CHICAGO

7.3 DEL
8 KHI KARACHI 21 LAX LOS ANGELES

8.3 KBL KABUL 22 ANC ANCHORAGE
9 DXB DUBAI 23 HNL HONOLULU

9.3 THR TEHRAN 24 MID MIDWAY

• Zone No. and city name are based on data as of May

2005.

• Displayed time for World clock is based on Home
clock time set and Zone No.

City

WELLINGTON

HONG KONG

NEW DELHI

Zone Display

11 CAI CAIRO

16 RIO

20 DEN DENVER

City

AZORES ISLANDS
2hrs behind LON
RIO DE JANEIRO

Memo Mode

Notes or other pieces of information that are not
appropriate for Telephone or Schedule mode can be
entered for convenience.
In the 1st line the same characters are allowable as in
Telephone mode. In the 2nd and the 3rd lines you can
enter numbers, –, and space. (36 characters or under

can be entered in each line.)

Storing memo entries

1. Tap
several times to display
the Memo mode screen.

Notes for storing and recalling entries

• When the memory is full, “MEMORY FULL!” appears

briefly, and the entry cannot be stored.

• When the symbol “l” or “j” appears, more

information exists. Tap l or j to switch the display.

Recalling entries – Telephone, Schedule, Memo –

Tap the desired mode key first.

: Recalls entries in forward order

: Recalls entries in reverse order

Sequential search

Tap or in each mode.

Direct search

• Enter the first characters (8 characters or under) of

the person’s name, schedule details, or memo item,

or .

and tap
Tap or then, to continue performing a direct

search.

2. Enter the memo item
and numbers.

E.g. UNION @

BANK x
01 m
272-0011223

3. Tap x to store in the memory.

Checking details of entries in Telephone mode

•To display each field on the 1st line, follow the

symbol “m” or “k” and tap m or k. (The symbol
above the 1st line shows each field.)

•Tap and hold l to start the auto scroll on the 1st

line. Tap l again to stop or restart the scroll. Tap
c to quit the auto scroll.

Sorting order

•Telephone and memo entries are stored by the first

character of the person’s name or memo item in the
following order (case sensitive):

• Schedule entries are stored by date and time.

Note

• When there is no (further or relevant) entry to be

recalled, “NOT FOUND!” appears briefly, and the
display returns to the mode screen.

PRINTED IN CHINA

05FC (TINSE0855EHZZ)

ON

OFF

ON

OFF

ON

OFF

C•CE

%

%

%

%

CM

M

+

M

–

M

+

RM

앀앙

C•CE

2nd

0.

CAPS2nd

CAD USD

6

–

–

0.6

CAPS2nd

CAD USD

0.

–

–

33

CAPS2nd

J28 32K4
20 19

20 20

CAPS

FREE

%

99

CAPS2nd

PASSWORD ?

CAPS2nd

EURO USD

0.

–

–

CAPS2nd

J28 4

10 20

ENG SPA

–

–

CAPS2nd

ALPHA ATTACK

01

CAPS

EYK

W

01

CAPS2nd

BLACKJACK

30

SHARP ELECTRONICS CORPORATION

Sharp Plaza, Mahwah, New Jersey 07430-1163

LIMITED WARRANTY

Your Product : Electronic Organizer

Warranty Period for this Product : One (1) year parts and labor from date of purchase.

Additional Items Excluded from Any consumable items such as paper, maintenance cartridge, ink cartridges supplied with the Product or
Warranty Coverage : to any equipment or any hardware, software, firmware, fluorescent lamp, power cords, covers, rubber parts, or periph-

erals other than the Product.

Where to Obtain Service : At a Sharp Authorized Servicer located in the United States. To find out the location of the nearest Sharp Authorized

Servicer, call Sharp toll free at 1-800-BE-SHARP.

What to do to Obtain Service : Ship (prepaid) or carry in your Product to a Sharp Authorized Servicer. Be sure to have proof of purchase available. If

you ship or mail the Product, be sure it is packaged carefully.

Write to our Customer Assistance Center

SHARP Electronics Corp.
Customer Assistance Center
Att: WIZARD HELP
1300 Naperville Drive
Romeoville, IL 60446

PRODUCT SUPPORT

If you have read the ORGANIZER operation manual,
but you still require product support, you can:

TO OBTAIN SUPPLY, ACCESSORY OR PRODUCT INFORMATION, CALL 1-800-BE-SHARP.

Call Sharp Customer Assistance Center

630-378-3590
(7am to 7pm CST M-F)

Visit our Web Site

www.sharpusa.com

Send an E-mail

[e-mail]

SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand product (the “Product”), when shipped in its original
container, will be free from defective workmanship and materials, and agrees that it will, at its option, either repair the defect or replace the defective Product or
part thereof with a new or remanufactured equivalent at no charge to the purchaser for parts or labor for the period(s) set forth below.

This warranty does not apply to any appearance items of the Product nor to the additional excluded item(s) set forth below nor to any Product the exterior of
which has been damaged or defaced, which has been subjected to improper voltage or other misuse, abnormal service or handling, or which has been altered
or modified in design or construction.

In order to enforce the rights under this limited warranty, the purchaser should follow the steps set forth below and provide proof of purchase to the servicer.
The limited warranty described herein is in addition to whatever implied warranties may be granted to purchasers by law. ALL IMPLIED WARRANTIES

INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR USE ARE LIMITED TO THE PERIOD(S) FROM THE DATE OF PURCHASE SET
FORTH BELOW. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.

Neither the sales personnel of the seller nor any other person is authorized to make any warranties other than those described herein, or to extend the duration
of any warranties beyond the time period described herein on behalf of Sharp.

The warranties described herein shall be the sole and exclusive warranties granted by Sharp and shall be the sole and exclusive remedy available to the purchaser.
Correction of defects, in the manner and for the period of time described herein, shall constitute complete fulfillment of all liabilities and responsibilities of Sharp
to the purchaser with respect to the Product, and shall constitute full satisfaction of all claims, whether based on contract, negligence, strict liability or otherwise.

In no event shall Sharp be liable, or in any way responsible, for any damages or defects in the Product which were caused by repairs or attempted repairs
performed by anyone other than an authorized servicer. Nor shall Sharp be liable or in any way responsible for any incidental or consequential economic or
property damage. Some states do not allow the exclusion of incidental or consequential damages, so the above exclusion may not apply to you.

THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.

Editing or deleting entries – Telephone, Schedule, Memo –

Editing

1. Recall the entry to be edited.

2. Tap e. The cursor starts to flash.

• In Telephone mode tap x several times to

display each field (the address field and so on).

3. Tap l, j, k, or m to move the cursor to the

position to be edited.

4. Enter, insert, or delete characters (refer to “Entering
Characters”).

•To cancel editing, tap c.

5. Tap x several times (until “STORED!” appears

briefly) to finish editing and to store the entry.

Deleting

1. Recall the entry to be deleted.

2. Tap d.

• “DELETE?” is displayed.

•To cancel the deletion operation, tap f.

3. Tap x to delete the entry.

Calculator Mode

The Organizer can calculate
numbers of up to 10 digits.
Tap q several
times to display the
Calculator mode screen (Calculator → Currency
conversion → Unit conversion → Calculator...).

Calculation

Be sure to tap c, c, and R to clear the display
and memory before performing a calculation.

Note

• When , , , or is tapped, the respective

symbol, +, –, ×, or ÷ is displayed. (In the examples in
this manual, these symbols are not described.)

If an error occurs

If the calculation result or the integer section in the
numerical value in the memory exceeds 10 digits or if a
number is divided by zero (0), an error occurs (“ERR” is
displayed).

Calculation examples

Example Operation

(–24+2)÷4=–5.5
34+57=91 34 57
45+57=102 45

68×25=1700 68 25
68×40=2720 40

200×10%=20 200 10
9÷36=25% 9 36
200+(200×10%)=220
500–(500×20%)=400
46=(43)2=4096 4
1/8=0.125 8

25×5= 125
–) 84÷3= 28 84 3
+) 68+17= 85 68 17

182

앀앙앙

25–9=4 25 9

1234567890×145 1234567890 145
=179012344050

24 2 4

(The addend becomes a
constant.)

(The multiplicand becomes
a constant.)

200 10
500 20

25 5

(17.90123440×1010=179012344000)

Display

–5.5

102.

1700.

2720.

220.

400.

4096.

0.125

M

125.

M

M

M

182.

ERR

17.90123440

17.90123440

91.

20.

25.

28.

85.

1. Registering a password and storing
secret entries

Up to 6 characters can be registered as the password.

• One password is valid for Telephone, Schedule, and

Memo modes.

If the password is forgotten, you cannot delete the
password only. You have to delete all the memory
contents. (Perform steps 2 and 3 as described in the
section, “Using the Organizer for the First Time”.) As a

safeguard, make a written record of the password.

Registering a password

1. Tap several times to display

“NAME?”, “SCHEDULE?”, or “MEMO?”.

2. Tap f

3. Enter the password (case sensitive), e.g. ABC.

4. Tap

5. Tap f

Storing secret entries

1. Enter characters in Telephone, Schedule, or Memo

2. Tap

3. Tap x to store a secret entry in the memory.

4.

.

to register it.

• The display returns to the screen in step 1 with
the symbol “

• If “ERROR!” appears briefly, a password has
already been registered. Enter the correct
password or delete the password and all the
memory contents.

disappears.

mode when “
is on).

• When “
Secret function on.

before tapping x to store. “ ”

appears.

• “STORED!” appears briefly, and the display
returns to the mode screen without “
(Secret function is on).

•You cannot display the secret entry until you turn
Secret function off.

”.

to turn Secret function on. “ ”

” is not displayed (Secret function

” is displayed, tap to turn

Secret Function

2. Turning Secret function on and off

When Secret function is on, “ ” is not
displayed.

•You can display, edit, or delete entries except
secret entries.

•You can enter new entries as secret or non­secret.

When Secret function is off, “

•You can display, edit, or delete secret entries
only. (You cannot display non-secret entries.)

•You cannot enter a new entry.

Tur ning Secret function off

1. Tap
displayed.

2. Tap f

3. Enter the password and tap

•“

entries.

• If you enter an incorrect password, “ERROR!”

appears briefly. Follow the above steps and enter
the correct password.

• Even when Secret function is turned off, it will be

automatically turned on (“

or B) after the power is turned off manually or

Tur ning Secret function on

1. Tap and check that “ ” is
displayed.

2. Tap f
The password is displayed. Memorize it again.

3. Tap
“

entries.

3. Changing the password

”

1. Turn Secret function off (“ ” appears).

2. Tap f

3. Tap f e.
The initial character of the password starts to flash.

4. Enter, or edit characters and make a new password.

5. Tap

” is displayed.

and check that “

. “PASSWORD?” is displayed.

” is displayed and you can display secret

A) when _, h, or q is

tapped,

automatically.

.

again.

” disappears and you cannot display secret

. The password is displayed.

. The new password is now registered.

.

” is not

” will disappear):

Currency/Unit Conversion Mode

1. Setting a currency rate

1. Tap q

several times to display
the currency
conversion mode
screen (refer to “Calculator mode”).

Example:

2. Tap to change the display and tap f
e. The initial character of “CAD” starts to flash.

•You can change each currency name by entering

3. Tap x. “0” starts to flash.

4. Enter the rate (up to 10
digits).

0.66

5. Tap x to store in
the memory.

1 CAD (Canada dollars)
= 0.66 USD (US dollars)

characters (up to 4 in each) and using l, if
needed.

Game Mode

Tap _ to play the game “BLACKJACK”.
Each time _ is tapped, the display switches

between “ALPHA ATTACK” and “BLACKJACK”.

BLACKJACK (Twenty-one)

Make your “hand” (the total of the numbers on the
cards) as close to 21, without going over 21.

1. Tap _ to display the following Game mode
screen.

2. Tap x to start a game.
The left 2 cards are dealt for
you. (One card is faced up and the other is faced
down.)

3. Agree the left-displayed maximum bet (up to 10) or
enter fewer bet. Tapping l also can bet to the
maximum.

4. Tap @ to see
your hand.
Each time @ is
tapped, a new card is
dealt.

• “J”, “Q”, and “K”

are counted as 10.

• “A” can be counted

as 1 or 11.

• When the first 2 cards are “A” and a face card

(“J”, “Q”, or “K”), your hand is “BLACKJACK”.

5. Tap x to stop
being dealt and hold
your hand. The
dealer’s hand and the
results are displayed.

• When you win,

your total flashes
and your bet is doubled.

• When you win with

“BLACKJACK”, your bet is tripled.

Your hand

Your total

Your bet

Your chips

The dealer’s
hand

Your chipsYour bet

The dealer’s
total

Your chips

Word Translator Mode

2. Converting currency/unit

You need to set the conversion rate before making the
currency conversion.

Example:

1. Display the screen: “CAD → USD”.

2. Enter the value to be converted.

3. Tap l to convert CAD

6. Tap x and display the Game mode screen.

ALPHA ATTACK

Type in characters (A to Z) displayed on the 1st line to
clear them. 20 levels of speed are available.

1. Tap _ to display

2. Enter the level number

3. Tap x to start a

4. Tap the same key as

Convert 500 CAD into USD using the rate
that you have set.

500

into USD.

•To convert in reverse
order (e.g. 200 USD
into CAD), enter 200 and tap j.

•You can use the unit conversion in the same
manner. You cannot change the units or the rates
for units.

• The conversion result may have a slight error as a
result of rounding off the number (e.g. up to 2
decimal places for currency conversions). Use the
conversion result for reference.

• When you have no more chips to bet, the game is
over.

•To quit the game, tap c or any mode key. Your
chips are stored for the next time.

•To return your chips to 30, tap f d and
x on the Game mode screen.

the following Game
mode screen.

(2 digits from 01 to 20).

• 01: slow, 20: fast

game.

the first character at
the left end of the 1st line. (In this case, tap keys in
the order: E → Y → K → W.)

•Tapping the correct key in the correct order
deletes the character.

• When 12 characters are displayed in each level,
the game continues in the faster level (up to 20).

• When no more characters can be displayed, the
game is over. The Game mode screen with the
level when the game is over is displayed.

Level

Caring for Your Organizer

• Do not carry the Organizer in the back pocket of
slacks or trousers.

•

Do not drop the Organizer or apply excessive force to
it.

•

Do not subject the Organizer to extreme temperatures.

Replacing Battery

Battery used

Type Model Quantity

Lithium battery CR2032 1

•

Improper battery replacement may cause change or
loss of the memory contents.

•

Be sure to write down any important
information stored in the memory before replacing
the battery.

•

Make sure the power is turned off before replacing
the battery.

•

Do not press

until the battery replacement

procedure is completed.

1. Precautions

Since improper use of the battery may cause leakage or
explosion, strictly observe the following instructions.

• Insert the battery with the positive side (+) correctly
facing up.

• Never throw the battery into a fire because it might
explode.

• Keep the battery out of the reach of children.

Because the battery in the Organizer was installed at the
factory, it may become depleted before the specified
expiration time is reached.

Specifications

• Model: YO-P5B6910

• Product name: Electronic Organizer

• Display: 3 lines of 12 digits

• Memory capacity: 48 KB Equivalent

• Clock mode:

Accuracy: ± 60 seconds/month at 25°C/77°F
Display: Year, month, day, day of the

week, hour, minute, second, AM/PM
Clock function: 12-hour/24-hour format
(switchable), 3 kinds of date type
(switchable), world clock function, daylight saving
time (summer time) display, daily alarm, hourly
alarm

• Telephone mode: Entering and recalling of telephone
entry (name, address, E-mail address, phone number,
and web address (URL))

• Schedule mode: Entering and recalling of schedule
entry (details, year, month, day, hour, and minute),
schedule alarm

• Memo mode: Entering and recalling of memo entry

• Calculator mode: 10 digits (with calculation status
symbols), arithmetic calculations, percentage, square
root, memory calculation, etc.

• Currency/unit conversion mode: 5 types of currency
conversion (editable) and 9 types of unit conversion

∗

• Since this product is not waterproof, do not use it or
store it where fluids can splash onto it.

• Clean only with a soft, dry cloth.

• Use only a SHARP approved service facility.

2. Battery replacement

If the display becomes dim and difficult to read,
immediately replace the battery with a new one.
Continued use of the Organizer with an exhausted
battery can alter or clear the memory contents.

• Complete the replacement of the battery within 1
minute, otherwise all the memory contents may be
cleared.

1. Press

2. Loosen the screw and remove the battery holder

3. Remove the exhausted battery by prying it out with

4. Install a new battery with the positive side (+) facing

5. Replace the holder cover and secure it with the

6. Press

7. Set the clock.

Fig. 1 Fig. 2

• Game mode: 2 games

• Word Translator mode: Approx. 2400 words

• Power consumption: 0.003 W

• Operating temperature: 0°C to 40°C (32°F to 104°F)

• Power supply: 3V¶ (DC), lithium battery CR2032 × 1

• Auto-power off: Approx. 7 minutes

• Battery life: Approx. 2 years at ambient temperature
of 25°C/77°F, assuming the following daily use: 30
minutes display, alarm sounding for 20 seconds and
key touch tone turned on/off 100 times.

• Weight (including battery): Approx. 72g (0.15 lb.)

• Dimensions: 64 mm (W) × 94 mm (D) × 14.3 mm (H)

• Accessories: 1 lithium battery (installed), operation
manual, stylus

∗

Memory at 48KB Equivalent. Approx. 750 telephone
names & numbers (name, telephone and fax number
are 14 characters per entry) can be stored by using
compression technology. (Compression Rate:
Approx. 1.5:1)

to turn the power off.

cover on the back of the unit.

a stylus. (Fig. 1)

up into the battery holder. (Fig. 2)

screw.

to turn the power on.

• If nothing appears on the display, press the
RESET switch and tap

• Do not tap f and x. This key sequence
will clear all the memory contents.

17

2-

/32" (W) × 3-11/16" (D) × 9/16" (H)

.

The Organizer offers an English-Spanish bi-directional
word translation function.

1. Tap ] to enter the English ➝ Spanish

translation mode.

Tap ] twice (or ] then j) to enter
Spanish ➝ English mode.

2. Enter the desired source word and tap x.

“English…” or “Spanish…” is displayed while
conducting search. The matching English or Spanish
word will then be displayed.

• When the symbol “l” appears, more letters exist.

To view remaining letters of long words that
cannot be accommodated on the screen, use l to
scroll right.

1. Checking memory storage

1. Tap
“NAME?”, “SCHEDULE?”, or “MEMO?”.

2. Tap f !, select
“MEMORY CHECK” by
using k or m , and tap
x. The number of
remaining bytes is displayed briefly.

Notes

• The Organizer can store up to 34070 bytes in the

memory (excluding the Calculator mode memory).

• One byte is required per character (in the 1st line) for

telephone, schedule, and memo entries.

• One byte is required for 2 digits in the number part

(in the 2nd and the 3rd lines) of telephone and memo
entries. (When there is an odd number of digits in a
number entry, the last digit occupies 1 byte.)

• In addition to the memory size for characters (in the

several times to display

Memory Storage

• If there is no matching word, “NOT FOUND!” is
displayed. The word next in alphabetical order will
then be displayed.

•Tap

or to scroll through word list, or edit

entry using the keyboard, and tap x for
another search.

•Tap j or l to return to the source word.

Caution

• Spanish words stored in this device are those of
Spain.

• Only the masculine form of the noun will be
displayed for nouns with both masculine and
feminine forms.

• Sometimes, two identical words will appear in the
word list.

• Enter European characters and spaces correctly.
Otherwise, the unit may not be able to complete

the search.

1st line) and numbers (in the 2nd and the 3rd lines),
each entry requires the following memory size:

Telephone entry ............ 6 bytes

Schedule entry ............. 8 bytes (including date and

Memo entry .................. 3 bytes

time)

2. Deleting all the memory contents

Perform steps 2 and 3 as described in the section,
“Using the Organizer for the First Time”.

•To cancel the deletion operation, tap any key EXCEPT

FOR f x in step 3.