Sharp XR1S User Manual
Setting up the Projector
Setting up the Projector
Position the projector perpendicular to the screen with the projector’s feet flat and level to achieve
an optimal image.
Note
• For an optimal image, position the screen so that it is not in direct sunlight or room light. Light falling
directly on the screen washes out the colors, making viewing difficult. Close the curtains and dim
the lights when setting up the screen in a sunny or bright room.
Standard Setup (Front Projection)
■ Place the projector at the required distance from the screen according to the desired picture size. (See page 20.)
Example of standard setup
Side View
Screen
H
18
Lens center
L
Projecting a Reversed Image
Projection from behind the Screen
■ Place a translucent screen between the projector and the audience.
■ Reverse the image by setting “Rear” in the “PRJ Mode” menu. (See page 46.)
Translucent screen
Audience
Projection Using a Mirror
■ Place a mirror (normal flat type) in front of the lens.
■ When the translucent screen is placed between the mirror and audience, set to “Front” in the
“PRJ Mode” menu. (See page 46.)
■ When the mirror is placed on the audience side, set to “Rear” in the “PRJ Mode” menu. (See
page 46.)
Setup
Set to “Front”
Audience
Mirror
Translucent
screen
Audience
Mirror
Set to “Rear”
Info
• When using a mirror, be sure to carefully position both the projector and the mirror so the light does
not shine into the eyes of the audience.
19
Loading...