This user guide is carefully designed to help you learn about
your phone’s features and operations quickly and effectively.
NOTICE
• We strongly recommend that you keep separate permanent
written records of all important data. Data may be lost or
altered in virtually any electronic memory product under
certain circumstances. Therefore, we assume no
responsibility for data lost or otherwise rendered unusable,
whether as a result of improper use, repairs, defects, battery
replacement, use after the specified battery life has expired
or any other cause.
• We assume no responsibility, directly or indirectly, for
financial losses or claims from third parties resulting from
the use of this product and any of its functions, such as
stolen credit card numbers, the loss or alteration of stored
data, etc.
• All company and/or product names are trademarks and/or
registered trademarks of their respective holders.
• Screen layout may differ from that illustrated in this user
guide.
The information described in this user guide is subject to
change without notice.
• All the functions described in this user guide may not be
supported by all networks.
• We assume no responsibility for downloaded contents,
information, etc. from the network.
• Occasionally, a few black or bright pixels may appear on the
screen. Please note that this will not have any impact on any
of the features or on performance.
Copyright
According to copyright laws, the reproduction, alteration and
use of material which is protected by copyright (music,
pictures, etc.) is only permitted for personal or private use. If
the user is not in possession of more extensive copyright or has
not received the explicit permission from the copyright owner
to reproduce, alter or use a copy which has been made or
modified in this way, this is considered to be a violation of the
copyright laws and gives the copyright owner the right to claim
for damages. For this reason, avoid the illegal use of material
which is protected by copyright.
Windows is a registered trademark of Microsoft Corporation in
the United States and/or other countries.
Introduction1
Powered by JBlend™ Copyright 1997-2005 Aplix
Corporation. All rights reserved.
JBlend and all JBlend-based trademarks and logos
are trademarks or registered trademarks of Aplix
Corporation in Japan and other countries.
Licensed by Inter Digital Technology Corporation under one or more of the
following United States Patents and/or their domestic or foreign
counterparts and other patents pending, including U.S. Patents:
4,675,863: 4,779,262: 4,785,450: 4,811,420: 5,228,056: 5,420,896:
5,799,010: 5,166,951: 5,179,571 & 5,345,467
T9 Text Input is licensed under one or more of the following: U.S. Pat. Nos.
5,818,437, 5,953,541, 5,187,480, 5,945,928, and 6,011,554;
Australian Pat. No. 727539; Canadian Pat. No. 1,331,057; United
Kingdom Pat. No. 2238414B; Hong Kong Standard Pat. No. HK0940329;
Republic of Singapore Pat. No. 51383; Euro. Pat. No. 0 842 463
(96927260.8) DE/DK, FI, FR, IT, NL,PT.ES,SE,GB; Republic of Korea Pat.
Nos. KR201211B1 and KR226206B1; and additional patents are pending
worldwide.
®
®
/Micro3D Edition™
is a registered trademark of HI Corporation
2Introduction
T9 Text Input is covered by the Hong Kong Standard Patent No.
HK0940329 and HK1010924.
T9 Text Input is licensed under one or more of the following: U.S. Pat. Nos.
5,818,437, 5,953,541, 5,187,480, 5,945,928, and 6,011,554;
Australian Pat. No. 727539; Canadian Pat. No. 1,331,057; United
Kingdom Pat. No. 2238414B; Hong Kong Standard Pat. No. HK0940329;
Republic of Singapore Pat. No. 51383; Euro. Pat. No. 0 842 463
(96927260.8) DE/DK, FI, FR, IT, NL,PT.ES,SE,GB; Republic of Korea Pat.
Nos. KR201211B1 and KR226206B1; and additional patents are pending
worldwide.
miniSD™ is a trade mark of SD Card Association.
Bluetooth is a trademark of the Bluetooth SIG, Inc.
The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc.
and any use of such marks by Sharp is under license. Other trademarks
and trade names are those of their respective owners.
Licensed by QUALCOMM Incorporated under one or more of the following
United States Patents and/or their counterparts in other nations ;
4,901,307 5,490,165 5,056,109 5,504,773 5,101,501
5,506,865 5,109,390 5,511,073 5,228,054 5,535,239
5,267,261 5,544,196 5,267,262 5,568,483 5,337,338
5,600,754 5,414,796 5,657,420 5,416,797 5,659,569
5,710,784 5,778,338
®
Flash™ technology by Macromedia, Inc.
CP8 PATENT
This product is licensed under the MPEG-4 Visual Patent Portfolio License for
the personal and non-commercial use of a consumer to (i) encode video in
compliance with the MPEG-4 Video Standard (“MPEG-4 Video”) and/or (ii)
decode MPEG-4 Video that was encoded by a consumer engaged in a
personal and non-commercial activity and/or was obtained from a licensed
video provider. No license is granted or implied for any other use. Additional
information may be obtained from MPEG LA. See http://www.mpegla.com.
This product is licensed under the MPEG-4 Systems Patent Portfolio License
for encoding in compliance with the MPEG-4 Systems Standard, except that
an additional license and payment of royalties are necessary for encoding in
connection with (i) data stored or replicated in physical media which is paid
for on a title by title basis and/or (ii) data which is paid for on a title by title
basis and is transmitted to an end user for permanent storage and/or use.
Such additional license may be obtained from MPEG LA, LLC.
See http://www.mpegla.com for additional details.
MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and
Thomson.
Introduction3
Useful Functions and Services
Your phone offers you the following features:
• Video Calling. You can talk while viewing each other on
respective screens.
• 3D and colour Java™ games and applications with a
graphic accelerator. You can also download various games
and applications from SmarTone-Vodafone via the mobile
Internet.
• A built-in digital camera for taking pictures and video clips.
• A message function for reading and creating SMS
messages.
• MMS (Multimedia Messaging Services) for personalising
your phone in various ways.
• Email for sending up to 300 KB and receiving mail with
attachments.
• A colour WAP browser for accessing information on the
mobile Internet.
• Your own ringtones and ringvideos. You can use downloaded
sound or video clip files as a ringtone or ring video clip.
• A music player that can play back MP3, AAC and AAC+
format sound files.
• Playback of the downloaded sound and video clip files.
• A voice recorder function for recording and playing back
voice clips.
4Introduction
®
•A Bluetooth
wireless technology interface for establishing
contact and transmitting data with certain devices. You can
transmit pictures, sounds, and video clips to OBEX-enabled
phones.
• An Infrared interface for data communication. You can
transmit pictures, sounds and video clips to OBEX-enabled
phones.
• A data synchronisation function for updating Phonebook
entries on the Internet.
• A schedule alarm for creating and sending schedule entries
with alarm settings.
• Video output. You can connect your phone to other devices,
such as TVs or videos set to output, and display Java™ data,
images, or video clips.
• With the built-in digital camera, you can read texts and
barcodes, and create QR codes.
• A miniSD™ memory card slot that expands connectivity with
a PC using the memory card.
Precautions Concerning Vehicle Use ................134
SAR ...............................................................134
Precautions for Use in USA .............................135
Out of Warranty List ..............................................137
Index .....................................................................138
Contents7
Getting Started
1
2
3
4
5
6
7
8
8Getting Started
9
10
11
12
13
14
15
16
17
18
19
20
23
21
22
24
25
26
27
28
29
24
30
31
32
1. Earpiece
2. Navigation Keys (Arrow Keys):
abcdMoves cursor to highlight a
menu item, etc.
Up arrow key: Displays the Shortcut menu
when pressed in standby.
Down arrow key: Displays the Phonebook
entries when pressed in
standby.
Left arrow key: Displays the list of GSX™ &
Java™ Gallery when pressed
in standby.
Right arrow key: Displays Galler y when pressed
in standby.
3. Centre Key:Displays the Main menu in
standby, and executes the
highlighted function.
4. Left Soft Key:
A
Executes the function in the
lower left of the screen.
Displays Messaging menu in
standby.
5. Send/Redial Key:
D
6. Video Calling Key:
S
Makes or accepts calls,
displays the call logs in
standby.
Makes or accepts Video
Callings.
7. Voice Mail Key:
G
Long press to connect to the
Voice Mail centre. (Depending
on the SIM/USIM card.)
8. * /Shift Key:
P
Switches character input
method as follows on the text
entry screen.
In English mode: Abc, ABC,
abc and 123. In T9 mode, T9
Abc, T9 ABC, T9 abc and 123.
In Traditional Chinese mode:
Abc, ABC, abc, 123, and T9
Stroke
In Simplified Chinese mode:
Abc, ABC, abc, 123, T9
PinYin, and T9 Stroke
Press to enter P, ?, – or * in
standby.
Long press in standby to lock
the keypad.
9. Sub Camera (Internal Camera)
10. Main Display
11. Microphone (for the viewer position of the display)
Getting Started9
12. Right Soft Key:
C
13. End/Power Key:
F
14. Clear/Back Key:
U
15. Music Key:
E
16. Keypad
17. #/Silent Key:
R
10Getting Started
Executes the function in the
lower right of the screen.
Shortcut to “SmarTone iN!” by
opening the browser. Press in
standby.
Ends a call and turns power
on/off.
Clears the characters before
the cursor, returns to the
previous screen, etc.
Displays Music menu in
standby.
Displays symbol screen on the
text entry screen.
Long press to switch
languages on the text entry
screen.
Turns the flash/auxiliary light
on or off in camera mode.
Long press in standby to
switch Profiles settings
between the mode most
recently activated and Silent
mode.
18. Microphone
19. Camera (External Camera)
20. Battery Cover
21. Built-in Aerial:Warning: Do not cover the top
of the phone with your hand
when in use as this may
interfere with the perform ance
of the built-in aerial.
22. Mobile Light:Used as a flash or an auxiliary
light in camera mode.
23. Infrared Port:Sends and receives data via
infrared.
24. Stereo Speakers
25. Small Light: Used as a battery charge
indicator, Event Light and
Status Light.
26. Side Keys (V/W):(These two k eys work in reverse
with the viewer position of the
display.)
Moves the highlight up or down.
Press in standby or during a
call to increase or decrease
the earpiece volume.
27. Menu Key:
X
Executes the function in the
lower left of the screen in the
viewer position of the display.
28. Camera Key:
Y
29. Cancel Key:
Z
Displays the Main menu when
pressed in standby, then
executes a highlighted
function in the viewer position
of the display.
Long press to activate the
camera.
Press during an incoming call
alert to answer the call in the
viewer position of the display.
Executes the function in the
lower right of the screen in the
viewer position of the display.
Long press in standby to turn
the mobile light on. You can
change the light colours by
pressing V or W when the
mobile light is on.
Long press to reject an
incoming call.
Press during an incoming call
alert to send a busy tone to the
caller in the viewer position of
the display.
Press to end the call in the
viewer position of the display.
30. Memory Card Slot Cover
31. VIDEO OUT/Stereo Handsfree Connector
External Connector
32.
:Used to connect either the
charger or a USB data cable.
Getting Started11
Inserting the SIM/USIM Card and the Battery
1. Slide off the battery cover ().
1
2
3. Hold the battery so that the metal contacts of the battery
are facing down, slide the guides on the top of the
battery into the battery slot (), and then insert it ().
4
3
2. Slide the SIM/USIM card into the SIM/USIM holder.
SIM/USIM card
12Getting Started
4. Replace the battery cover.
Note
• Make sure that only 3V SIM/USIM cards are used.
• Make sure that the standard accessory battery (XN-1BT70)
is used.
Removing the SIM/USIM Card and the
Battery
1. Ensure that the phone is turned off and that the charger
and other accessories are disconnected. Slide off the
battery cover.
2. Lift the battery using the protruding edge and remove
the battery from the phone.
3. Hold down gently while sliding the SIM/USIM card
out of the SIM/USIM holder ().
1
2
Battery Disposal
The device is battery-powered. In order to protect the
environment, please read the following points concerning
battery disposal:
• Take the used battery to your local waste depot, dealer or
customer service centre for recycling.
• Do not expose the used battery to a naked flame, immerse
in water or dispose with the household waste.
Getting Started13
Charging the Battery
Using the Charger
1. Open the cover of the external connector, connect the
charger to the external socket located at the bottom of
the phone by pressing both sides indicated with arrows,
and connect to an AC outlet.
Small light
The small light turns on.
Standard charging time: Approx. 140 minutes
Note
• When you purchase this phone, the battery may not be fully
charged.
• Charging time may v ary depending on the state of the b attery
and other conditions. (See “Battery” on page 132.)
14Getting Started
To Disconnect the Charger
When charging is complete, the small light turns off.
1. Unplug the charger from the AC outlet, then unplug the
charger connector from the phone.
2. Close the cover.
Note
• Do not use any non -approved chargers as they may damage
your phone and invalidate any warranties, see “Battery” on
page 132 for details.
To Charge Using the Cigarette Lighter Charger
The optional cigarette lighter charger supplies power for
charging from the cigarette lighter socket of a car.
Battery Level Indicator
The current battery level is displayed in the upper right of the
main display.
Low Battery during Use
When the battery is running low, an alarm will sound and
“” is displayed on the main display.
If you are using your phone and you hear the low battery alarm,
attach your charger as soon as possible. The phone may not be
able to continue normal operation if you continue to use it.
Battery IndicatorsCharge Level
Sufficiently charged
Charging recommended
Charging required
Empty
Inserting the Memory Card
1. Turn off the phone.
2. Open the memory card slot cover and insert the card
with the label side facing up.
3. Insert the memory card all the way in until it clicks.
4. Close the cover.
Note
• Make sure that the phone is turned off before inserting the
memory card.
• Be sure to insert the card in the correct direction and
orientation.
• Do not open the memory card cover while the memory card
is being formatted or written to. The card may be damaged
beyond use.
• Keep all memory cards out of the reach of small children.
Tip
• You see the following indicators when the memory card is in
use:
: Appears when the card is inserted.
: Appears when the card is damaged or unusable.
: Appears when the card is being written or read.
: Appears when the card is being formatted.
Removing the Memory Card
1. Open the memory card slot cover and slightly push the
card so it pops out. Remove the card and close the cover.
Note
• Make sure that the phone is turned off before removing the
memory card.
• Do not remove the memory card while the memory card is
being formatted or written to.
Getting Started15
Connecting the Stereo Handsfree
1. Open the cover of the Stereo Handsfree Connector.
2. Connect the Stereo Handsfree.
Turning Your Phone On and Off
To turn the power on, long press F for approximately 2 seconds.
To Enter the PIN Code
If activated you are asked to enter a PIN (Personal Identification
Number) code and handset lock code after turning on your phone.
1. Enter your PIN code.
The PIN code is 4 to 8 digits.
2. Press .
16Getting Started
Note
• If your PIN code is entered incorrectly three times in a row,
the SIM/USIM card is locked. See “Enabling/Disabling the
PIN Code” on page 115.
• If the clock settings have not been entered, the date and time
entry screen is displayed (p. 108).
To Copy All Phonebook Entries from the SIM/USIM Card
When you insert the SIM/USIM card into your phone for the first
time and start the Phonebook application, you are asked
whether you wish to copy Phonebook entries on the SIM/USIM
card. Follow the on-screen instructions, or you can do it later
using the Phonebook menu as follows:
→
“Call Manager”
“Advanced” → “Copy All Entries”
1. Select “From SIM to Handset”.
Keypad Lock
You can lock the keypad to prevent it from being pressed
accidentally.
Locking the Keypad
1. Long press P in standby.
To unlock, long press P.
Tip
• Emergency numbers (999, etc.) can be entered and dialled
regardless of the keypad lock.
Display Indicators (Main Display)
Indicator area
Left soft
key
Centre key
Right soft
key
1./: Strength of received signal/Service out of
range
:3G (UMTS)/GPRS
: GSM/GPRS
: Roaming outside network
2.:Off Line Mode [enabled]
3.:Data exchange with external device
4./:Connection to the server [established/
communicating]
5.:Memory card inserted
6./:Voice call [incoming/in progress]
7.// : Video calling communication mode enabled
[voice and video/voice/video]
20.// : WA P/OTA provisioning alerts [WAP al ert/OTA
provisioning alert/WAP and OTA provisioning
alerts]
21.:Voice mail message alert
22.:Connection status [1st IrDA communication
[enabled/exchanging information]]
23.:Phone Lock enabled
24.:Keypad Lock enabled
25./(blank): IrDA setting [enabled/disabled]
26./: Phonebook Search Mode
Opening Your Phone
Your phone can be opened in the following three positions:
normal, self-portrait and viewer positions.
Normal Position ()
1. Open the phone until the display stops as illustrated.
Self-portrait Position ()
2. Turn the display 180° clockwise.
Use this position to take a self-portrait with the external
camera.
Do not turn the display anticlockwise as this may damage it.
Viewer Position ()
3. Close the main display toward the keypad.
Note
• Operations of V and W are reversed in the viewer position
of the display.
• Keypad operations cannot be performed in the viewer
position of the display.
• Be careful not to carry the phone in the viewer position of the
display as this may damage the display.
Getting Started19
Navigating Functions
All applications are accessed from the Main menu. To open the
Main menu, press the centre key () in standby.
To launch applications, you will need to highlight menu items,
and make selections. To select a menu item (indicated in
quotation marks), move the cursor using a, b, c and d,
and press to select.
In certain procedures, you will need to press one of the soft
keys (indicated in square brackets), which are displayed in the
lower left and right of the screen. Press the corresponding soft
key (A or C).
To return to the previous screen, press the right soft key if it
displays Back. To close the Main menu, press the right soft key
if it displays Exit.
Each section in this user guide starts with a list of items you will
need to select in order (indicated in italics) before performing
the procedures shown. Select each item to reveal the next set
of items that you have to select. Open subsection items after
opening those listed in the main section.
Example:
→
“Call Manager”
20Navigating Functions
“Phonebook” → “Add New”
Using in the Viewer Position of the Display
Available keys in viewer position of the display are V, W, X,
Y and Z.
To open the Main menu, press Y in standby.
To select a menu item (indicated in quotation marks), press V
or W, and press Y to select.
In certain procedures, you will need to press one of the soft
keys (indicated in square brackets), which are displayed in the
lower left and right of the screen. The left soft key is X and
the right soft key is Z.
The side keys function in camera mode as follows:
: Zoom-in/Zoom-out
V/W
X: Options
Y: Capture
Z: Switches between the photo camera and video
camera modes.
Voice Call/Video Calling Functions
Making a Voice Call
1. Enter the area code and the phone number you wish to
dial and press D to dial.
If you enter the wrong number, press U to delete the
number to the left of the cursor.
Emergency Calls
1. Enter 999 or 911 (international emergency number)
using the keypad and press D to dial.
Note
• Emergency calls may not be able to be made on all mobile
phone networks when certain network services and/or
phone features are in use. Contact your service provider for
more information.
• This emergency number can normally be used to make an
emergency call in any country, with or without a SIM/USIM
card inserted, if a 3G (UMTS)/GSM network is within range.
International Calls
1. Long press Q until a + (international dialling prefix)
sign is displayed.
2. Enter the country code, followed by the area code
(without the leading zero) and the phone number, and
press D to dial.
Adding an Entered Phone Number to the Phonebook
1. After entering a phone number, press [Options] and
select “Save Number”.
For details on creating a new entry, see “Add New” on
page 44.
Showing or Hiding My Phone Number on the Display of
the Called Party
1. After entering a phone number, press [Options] and
select “Show My ID” or “Hide My ID”.
Making a Call Using the Phonebook in the Viewer
Position of the Display
1. Press Y.
2. Select “Call Manager”.
3. Select “Phonebook”.
4. Select the entry you wish to call.
5. Select the phone number.
6. Select “Call” to dial.
To end a call, press Z.
Voice Call/Video Calling Functions21
Speed Dialling
Up to 8 phone numbers from the Phonebook memory (Handset
and SIM/USIM) can be assigned to speed dials. You can call the
numbers using the digit keys (G to O). The phone
number of the Voicemail centre is assigned to G .
For details on setting the speed dial list, see “Speed Dial List”
on page 48.
1. To dial a number using the speed dial, long press any of
the digit keys (G to O).
The phone number saved in the speed dial list is dialled.
Redialling
You can redial numbers in the call log. Select from specific
categories or “All Calls”. Specific categories contain up to 30
numbers and the “All Calls” list contains up to 90.
1. Press D in standby.
2. Select the category from “All Calls”, “Dialled Numbers”,
“Missed Calls” or “Received Calls”.
To switch logs, press c or d.
3. Highlight the phone number you wish to call.
4. Press D to redial the call.
22Voice Call/Video Calling Functions
Answering a Voice Call
When an incoming call is detected, the phone rings.
1. Press D or [Answer] to answer the call.
Or press any key (except F, U and [Busy]) when the
“Any Key Answer” function is enabled. Set the Any Key
Answer function in the profile of each mode (p. 105).
Tip
• If you have subscribed to the Calling Line Identification (CLI)
service and the caller’s network sends the number, the
caller’s number is displayed on the screen. If the caller’s
name and number are saved in the Phonebook, the caller’s
name and phone number are displayed on the screen.
• If the number is a restricted number, the display shows
“Withheld”.
• When you receive a call from the person whose picture is
registered in the Phonebook, the picture, name and phone
number are displayed.
Answering a Call in the Viewer Position of the Display
1. Press X or Y to answer the call.
To end a call, press Z.
To reject the incoming call, long press Z.
Rejecting an Incoming Call
1. Press F while the phone is ringing to reject a call you
do not wish to answer.
Letting the Caller Know You are Unavailable
1. Press [Busy] while the phone is ringing to send a busy
tone to the caller.
Incall Menu (Voice Call)
Your phone has additional functions available while a call is in
progress.
Adjusting the Earpiece Volume
During a call, you can adjust the earpiece volume (and
handsfree volume, if connected).
1. Press V or W to display the Earpiece Volume screen.
V
2. Press
3. Press when the volume is set to the desired level.
(or a/d) to increase the volume of the call or
press W (or b/c) to decrease the volume.
Tip
• In the viewer position of the display, press X or Y to
display the incall menu.
• In the viewer position of the display, use V or W to increase
or decrease the earpiece volume. Operations of these keys
are reversed in the viewer position.
Turning the Speaker On and Off
You can talk via the loudspeaker on the back of the phone by
turning it on.
1. During a call, press [Options] and select “Loudspeaker On”.
Putting a Call on Hold
This function allows you to manage two calls at the same time.
If you wish to make another call while you are talking to
someone, you can put the current call on hold to call someone
else.
To Make Another Call during a Call
1. During a call, press [Options] and select “Hold”.
The current call is put on hold.
2. Press [Options] and select “Dial New Number”.
3. Enter the phone number you wish to make another call
to, then press D.
Tip
• You can also make another call by entering the phone
number during a call instead of step 1. The current call is
automatically put on hold.
Voice Call/Video Calling Functions23
Accessing SMS/MMS Menu during a Call
1. During a call, press [Options] and select “Messages”.
The following options are available: “Create Message” to
make an SMS and MMS, or “Inbox”, “Sent” or “Drafts” to
access these folders. For details on SMS, see “SMS” and
“MMS” on page 59.
Call Waiting
This service notifies you of another incoming call while you
have a call in progress.
1. During a call, press [Options] and select “Hold &
Answer” to answer the second call.
The first call is put on hold and you can now talk to the
second caller.
Note
• You need to set “Call Waiting” to “On” if you use the Call
Waiting service (p. 111).
• Call Waiting service may not be available on all networks.
Contact your network operator for more information.
• If you do not wish to answer the second call, press [Options]
and select “Busy” in step 1. If “Reject” is selected, the log of
the second call is saved as a missed call.
24Voice Call/Video Calling Functions
Conference Call
Conference call is a call with more than 2 participants. You may
include up to 5 participants in a conference call.
To Make a Conference Call
You must have one active call and one held call.
1. During a call, press [Options] and select “Multi Party”.
2. Select “Conference All” to join the conference call.
3. Press F to end the conference call.
Note
• The conference call service may not be available on all
networks. Contact your network operator for more
information.
• You have more options for the Conference call in step 2:
• To put all participants on hold, select “Hold All”.
• To put all participants except the current call on hold,
select “Private”.
• To end the call with all participants, select “End Active
Call(s)” or “End Held Call(s)”.
• To reject adding more participants to the current party,
press [Options] and select “Reject”, or you can send the
busy tone by selecting “Busy”.
To Add New Participants to the Conference Call
1. Press [Options] and select “Dial New Number”.
2. Enter the number you wish to include in the conference
call and press D to dial.
3. Press [Options] and select “Multi Party”.
4. Select “Conference All” to join the conference call.
If you wish to add other participants, repeat steps 1 to 4.
To End the Call with a Conference Call Participant
1. During a conference call, highlight the person that you
wish to disconnect from the conference call.
2. Press [Options] and select “End This Call”.
To Have a Private Conversation with One of the Participants
If you wish to have a private conversation with one of the
participants, you may select the participant from the
conference list and put the other participants on hold.
1. During a conference call, select the person that you wish
to talk to.
2. Press [Options] and select “Multi Party”.
3. Select “Private”.
4. Once you have finished the private conversation, press
[Options] and select “Multi Party”.
5. Select “Conference All” to return to the conference call.
Muting the Microphone
1. During a call, press [Mute].
To unmute the microphone, press [Unmute].
Voice Call/Video Calling Functions25
Making a Video Calling
Note
• Use this function with only the video calling enabled phones.
• Make sure that the battery is fully charged and the signal is
strong before using this function.
• Turn the loudspeaker on or use a switch-equipped Stereo
Handsfree or handsfree kit so that you can talk while looking
at the video calling screen on the main display.
Making a Video Calling
1. Enter the area code and the phone number you wish to
dial and press S, or press [Options] and select
“Video Calling” to dial.
If you enter the wrong number, press U to delete the
number to the left of the cursor.
When the line is connected, the image of the called party is
displayed upper on the screen, and yours lower left.
Tip
• If the called party’s phone is not video calling enabled, you
can press F and enter the phone number again to make a
voice call.
26Voice Call/Video Calling Functions
Answering a Video Calling
When an incoming call is detected, the phone rings.
1. Press S or D to answer the call by video or A
[Answer] to answer the voice only.
Tip
• If you have subscribed to the Calling Line Identification (CLI)
service and the caller’s network sends the number, the
caller’s number is displayed on the screen. If the caller’s
name and number are saved in the Phonebook, the caller’s
name and phone number are displayed on the screen.
Rejecting an Incoming Call
1. Press F while the phone is ringing to reject a call you
do not wish to answer.
Letting the Caller Know You are Unavailable
1. Press [Busy] while the phone is ringing to send a busy
tone to the caller.
Incall Menu (Video Calling)
Muting the Microphone
1. During a video calling, press [Mute].
To unmute the microphone, press [Unmute].
Switching Images
You can switch images between the main and sub screens.
1. During a video calling, press [Options] and select
“Switch Images”.
Tip
• You can also switch images between the main and sub
screens by pressing during a video calling.
Changing the Image of Yourself
1. During a video calling, press [Options] and select
“Camera Picture”.
2. Select “Internal Camera”, “External Camera” or
“Alternative Image”.
“Internal Camera”:The image through the internal
camera is displayed and sent to
the party.
“External Camera”:The image through the external
camera is displayed and sent to
the party.
“Alternative Image”:The camera is turned off and the
image selected in “Alternative
Image” of “Video Calling
Settings” (p. 114) is used.
Tip
• You can also switch the image shown to the caller by
pressing c or d during a video calling.
Using the Optical Zoom Function
The optical zoom enables you to zoom the picture more clearly
by the actual zooming action of the optical lens. The optical
zoom is used up to the [×2] zooming ratio. If the zoom exceeds
[×2], the digital zoom is used to further magnify.
1. During a video calling, press [Options] and select
“Enable Opt. Zoom”.
2. Press a or b.
Turning the Speaker On and Off
You can talk via the loudspeaker on the back of the phone by
turning it on.
1. During a video calling, press [Options] and select
“Loudspeaker On”.
Voice Call/Video Calling Functions27
Note
• In a high-noise environment, you may not be able to
continue a call, or make a clear call. We recommend that you
use the Stereo Handsfree.
• With this option, you may not be able to continue a call
without interruption if you increase the earpiece volume. We
recommend that you decrease the earpiece volume or use
the Stereo Handsfree.
Video Calling Settings
To Change the Quality of the Incoming Image
You can adjust the quality of the called party’s image.
1. During a video calling, press [Options] and select “Video
Calling Settings”.
2. Select “Incoming Picture Quality”.
3. Select “Normal”, “Quality Priority” or “Frame Rate
Priority”.
“Normal”: The standard quality is used.
“Quality Priority”: The quality of the picture takes
precedence over the frame rate.
“Frame Rate Priority”: The frame rate takes
precedence over the quality.
28Voice Call/Video Calling Functions
To Turn the Backlight On or Off
You can turn on the backlight of your screen.
1. During a video calling, press [Options] and select “Video
Calling Settings”.
2. Select “Backlight”.
3. Select “Always On”, “Always Off” or “As Normal
Setting”.
When “Always On” is selected, the backlight will always be
on during a video calling.
When “As Normal Setting” is selected, the backlight will
time out depending on the Backlight setting (p. 106).
To Adjust the Video Exposure
1. During a video calling, press [Options] and select “Video
Calling Settings”.
2. Select “Exposure”.
3. Press a (Bright) or b (Dark).
Mirror Image
During a video calling, you can reverse your image on the sub
screen.
1. During a video calling, press [Options] and select “Video
Calling Settings”.
2. Select “Mirror Image”.
3. Select “On” or “Off”.
To Change the Sub Camera Image to the Alternative Image
During a video calling, you can switch the image shown to the
caller between the sub camera image and an alternative image
or display an image while putting a call on hold from the saved
picture files.
1. During a video calling, press [Options] and select “Video
Calling Settings”.
2. Select “Alternative Image” or “Hold Guidance Picture”.
3. Select “Preset Picture” or “Picture Gallery”.
Voice Call/Video Calling Functions29
Using the Menu
Top Menu
1. Press in standby.
The Main menu is displayed.
2. Press a, b, c or d to highlight the desired menu,
then press to access the function.
The sub menu is displayed.
For details on the menu options, see “List of Menu
Functions” on page 31.
30Using the Menu
Using the Menu in the Viewer Position of the Display
1. Set the phone in the viewer position of the display.
2. Press Y to display the Main menu.
3. Press V or W to mov e th e cu rsor up o r do wn, the n pre ss
X or Y.
Press Z to return to the Main menu.
The cursor moves the same as in the normal position of the
display by using V and W.
For details on the functions of these keys, see page 10.
List of Menu Functions
Menu No./Main MenuMenu No./Sub Menu1
1 Games & Applications
2 Browser
3 Organiser
1 GSX™ & Java™ Gallery
2 Set Java™ Wallpaper
3 Java™ Settings
4 Java™ Information
1 Homepage
2 Go to URL
3 Bookmarks
4 Alert Inbox
5 My Saved Page
6 Access History
7 Browser Settings
8 News
9 Music
10 Sports
11 Games
12 What’s New?
1 Calendar
2 Alarms
3 Calculator
4 Voice Recorder
5 Scanner
6 Stopwatch
7 Tasks
8 World Clock
9 Countdown Timer
10 Expenses Memo
11 Phone Help
Menu No./Main MenuMenu No./Sub Menu1
4 Messages
5 Camera
6 Gallery
7 Media Player
1 Create Message
2 Inbox
3 Alert Inbox
4 Drafts
5 Tem pl at es
6 Sent
7 Outbox
8 Voice Mail
9 Cell Broadcasts
10 Area Info
11 Messaging Settings
12 Memory Status
1 Picture Gallery
2 Video Gallery
3 SD VIDEO
4 Sound Gallery
5 GSX™ & Java™ Gallery
6 Tex t Tem pla te s
7 Other Documents
8 Memory Status
1 TV & Video
2 Music Player
Using the Menu31
Menu No./Main MenuMenu No./Sub Menu1
8 Call Manager
9 Settings
10 SIM Application
11 Call Log
12 Connectivity
1 Phonebook
2 Manage Group
3 Speed Dial List
4 My Card
5 Message Groups
6 Phonebook Settings
7 Advanced
1 Profiles
2 Display Settings
3 Sound Settings
4 Time & Date
5 Language
6 Call Settings
7 Video Calling Settings
8 Security Settings
9 Card Settings
10 Master Reset
1 All Calls
2 Dialled Numbers
3 Missed Calls
4 Received Calls
5 Call Timers
6 Data Counter
1 Bluetooth
2 Infrared
3 Network Settings
4 Internet Settings
5 Off Line Mode
6 Backup/Restore
32Using the Menu
Entering Characters
When entering c haracters to create Phonebook e ntries, SMS or
MMS, etc., press the corresponding keys.
In multi-tap input method, press each key until the desired
character is displayed. For example, press H once for the
letter “A” or twice for the letter “B”.
Multi-tap Mode
Pressing each key scrolls characters in the following order.
Switches character case among four modes:
Abc, ABC, 123 and abc.
.,?!:;''' ↵
@/ \ #*= | ^ ¿ ¡
_(<[$£¥€§ß
-)> ]ЕДЖЬьщ
+{еджаЗЙий
&} м с СЦШ ц ш т
˜ ∆ΦΓΛΩΠΨΣΘ
% Ξ ¤
: Long press to enter 1 - 9 numbers.
:Long press to enter space in Numeric
:Long press to shift between multi-tap and
:Long press to display the Input Language
mode or to enter 0 in other modes.
T9 mode.
screen.
Lower Case
Characters
SP
Entering Characters33
Numeric
Changing the Input Language
1. On the text entry screen, press [Options].
2. Select “Input Language”.
3. Select the desired language.
Changing the Input Method
1. On the text entry screen, press [Options].
2. Select “Input Method”.
3. Select the input method you wish to use.
Tip
In T9 or multi-tap mode, you can switch input mode as follows
by pressing P.
English/T9 mode
English/Multi-tap mode
Input Method
T9 Mode
Multi-tap mode
OthersSymbol TableSymbol TableSymbol Table
34Entering Characters
Input Language
= English
T9 Abc
T9 ABC
T9 abc
Abc
ABC
abc
Numeric
Input Language
= Traditional
Chinese
T9 Stroke
Abc
ABC
abc
Numeric
Input Language
= Simplified
Chinese
T9 Stroke
T9 PinYin
Abc
ABC
abc
Numeric
Traditional Chinese/T9 mode
Simplified Chinese/T9 mode
T9 English Mode
Using T9 English Mode
T9 text input method is a shortcut to enter text easily and
quickly.
1. On the text entry screen, press [Options].
2. Select “Input Method”.
3. Select the T9 mode (T9 Abc, T9 ABC, T9 abc) you wish
to change. “ ”is displayed on the main display.
4. Press the keys to enter characters.
5. Press a or b to select the word you wish to input.
6. If you wish to clear the word, highlight it and long press
U.
7. Press or select [Options] and “Done” to complete
the selection.
Tip
• If you press Q instead of step 6, a space is inserted next
to the selected word.
User Dictionary
You can create your own English words for T9 Alphabet text
input.
Note
• This function is only available when “Input Language” is set
to “English”.
1. On the text entry screen in T9 mode, press [Options] and
select “User Dictionary”.
2. Select “Add New Word” and enter a new word.
To edit a word in the list
1. On the text entry screen in T9 mode, press [Options] and
select “User Dictionary”.
2. Highlight the desired word.
3. Press [Options] and select “Edit”.
4. Modify the word.
Entering Characters35
T9 PinYin and T9 Stroke Mode
In T9 PinYin and T9 Stroke mode, keys are as follows.
T9 PinYin and T9 Stroke Mode keys
KeyStrokePinYin
G
H
I
J
K
L
Wildcardmno
M
N
O
P
Change Input Method
Q
R
36Entering Characters
Go to the FullWidth Symbols screen.
abc
def
ghi
jkl
pqrs
tuv
wxyz
Space
G-O
P
R
Changing the Input Method between Stroke and PinYin
“Changing the Input Method” on page 34
See
: Long press to input corresponding Chinese
character displayed in the candidate field.
:Long press to enter tones “”
in T9 PinYin mode .
:Long press to display the Input Language
screen.
.
Using Stroke Mode (Traditional)
The following is an example of entering “”.
1. Change the input mode to T9
Stroke mode.
2. Press IGJ to display
the corresponding stroke for
“”.
3. Long press the corresponding key
to complete the selection (in this
case, M).
Note
• Each Traditional/Simplified Chinese mode has own T9
Stroke mode. The screen examples in steps 1 to 3 are
displayed when you select “Traditional Chinese” in the Input
Language option.
Using PinYin Mode
Input field
Long press the
corresponding numeric key
to select the desired
character directly from the
Candidate field.
Candidate field
The following is an example of entering “”.
1. Press K for the first letter of the reading, then
highlight “l”.
Entering Characters37
2. Press J for the vowel of the first letter, then highlight
“li”.
Characters with the same reading are displayed in the
Candidate field.
3. Select the desired character.
4. Long press corresponding numeric key to enter the
desired character (in this case, H).
Tip
• When the cursor is placed after the first character, the
Candidate field displays characters most likely to follow.
38Entering Characters
• If you want to use tone options, long
press P instead of step 3 to
display the desired character.
The tone symbols are displayed in
the Candidate field.
Press the corresponding numeric
key ( H).
Chinese User Dictionary
You can create your own word list for T9 Chinese input.
You can enter Chinese characters, alphabet, symbols and
numbers. Only capital letters can be used for acronyms.
Note
• This function is only available when “Input Language” is set
to “Traditional Chinese” or “Simplified Chinese”.
Creating a New Entry
1. On the text entry screen, press [Options] and select
“Chinese User Dictionary”.
2. Select “Add New Word”.
3. Enter new word.
4. Enter acronym.
Editing a Word in the List
1. On the text entry screen, press [Options] and select
“Chinese User Dictionary”.
2. Highlight the desired word.
3. Press [Options] and select “Edit”.
4. Modify the entry word.
5. Modify the acronym.
Deleting a Word
1. On the text entry screen, press [Options] and select
“Chinese User Dictionary”.
2. Highlight the desired word.
3. Press [Options] and select “Delete”.
4. Press [Yes] or [No].
Entering Characters39
To Call the Entry
Examples of entry words and acronyms:
The illustration below assumes that the example entry words
and acronyms are already stored.
1. Press M and highlight “S”.
If you long press G, “ ” will
be entered.
You can also select the other
words starting with the same
acronym by pressing b.
This example is using
T9 PinYin mode
Press b
2. Press H and highlight “SB”.
If you long press G, “”
will be entered.
40Entering Characters
Note
• Acronyms are available for T9 PinYin mode only.
• You can also enjoy word completion or predictive input of the
words stored in the Chinese User Dictionary.
When the first three characters of a word are entered, the
whole word appears at once.
The following is an example of predictive input and word
completion. This example uses words stored in the last section.
1. Press H, K, I and
long press H to enter “ ”.
2. The character “ ” appears at
.
(Candidates and are taken
from the Chinese User
Dictionary.)
This example is using
Stroke input method
for Simplified
3. Long press N to enter “ ”.
4. Long press O to enter “ ”.
The sentence is completed
automatically.
Note
• Word completion does not take place if the entry word has
less than four Chinese characters.
• Predictive characters from the Chinese User Dictionary
appear at , so you only have to press O to enter the
characters.
If there are entry words which start with the same characters
such as “” and “”, candidates “ ” and “ ”
appear at or , depending on the sequence in which the
words are saved.
Symbols and Punctuations
1. On the text entry screen, press [Options].
2. Select “Add Symbol”.
The first symbol page is displayed.
In Chinese input mode, the FullWidth Symbols screen is
displayed.
3. Press a or b to switch pages (HalfWidth Symbol and
FullWidth Symbol Pages), or use the numeric keys G
or H.
Tip
• R is a shortcut to launch Symbol Tables.
Entering Characters41
Using Templates
You can use the sentences registered in Text Templates when
entering characters.
For details on creating the text template, see “Adding Phrases
to Text Templates” on page 82.
1. On the text entry screen, move the cursor to the point
you wish to insert the template.
2. Press [Options] and select “Advanced”.
3. Select “Insert Template”.
4. Select the desired text template.
The selected text template is inserted.
Copying, Cutting and Pasting Text
1. On the text entry screen, press [Options] and select
“Advanced”.
2. Select “Copy” or “Cut”.
3. Move the cursor to the first letter to be copied or to be
cut, then press .
4. Move the cursor to the last letter to highlight the area,
then press .
5. Move the cursor to the point you wish to paste the
letters.
6. Press [Options] and select “Advanced”.
7. Select “Paste”.
42Entering Characters
Insert Phonebook Entries
You can insert the entries registered in Phonebook when
entering characters.
For details on creating the Phonebook entries, see “Call
Manager” on page 43.
1. On the text entry screen, move the cursor to the point
you wish to insert the Phonebook Entry.
2. Press [Options] and select “Advanced”.
3. Select “Insert Phonebook Entry”.
4. Select the desired Phonebook Entry.
The selected entry is inserted.
Call Manager
You can store the phone numbers and Email addresses of your
friends, family and colleagues in the Phonebook.
Your phone can store up to 500 entries. In a Phonebook, you
can save the following items:
Items Saved in the Handset Memory
Last Nameup to 16 characters
First Nameup to 16 characters
Add Phone Number up to 3 phone numbers (up to 32
Add Email Addressup to 3 Email addresses (up to 128
Group16 groups
Street Nameup to 64 characters
City Nameup to 64 characters
State Nameup to 64 characters
Postcodeup to 20 characters
Country Nameup to 32 characters
Noteup to 256 characters
Birthday(date)
(M 8)
digits each)
characters each)
Picture(file name)
Assign Tone/Video(file name)
Secret(On or Off)
Items Saved in the SIM/USIM Memory
Nameup to 16 characters
Add Phone Number 1 phone number (up to 32 digits)
Add Email Address1 Email address (up to 38 characters)
Groupup to 16 groups
Note
• Each item depends on SIM/USIM Cards.
Call Manager43
Changing the List Displayed
“Call Manager” → “Phonebook Settings” → “Source”
1. Select “Handset” or “SIM”.
Selecting the Storage Memory
“Call Manager” → “Phonebook Settings” → “Save to”
1. Select “Handset”, “SIM” or “Choice”.
Sorting the Phonebook List Order
You can change the listing order of the Phonebook entries
between by pinyin order or by group.
1. Select “Character Search”, “PinYin Search” or “English
Search”.
44Call Manager
Add New
You can choose either the phone or SIM/USIM card memory
locations to store the new entry. For switching locations, see
“Selecting the Storage Memory”.
The amount of phone numbers that you can store to the SIM/
USIM card is dependent on its capacity. Contact your network
operator for details.
→
“Call Manager”
If you select the “Choice” option for the memory to be used, the
selection is between “To Handset” and “To SIM”.
1. Select the field you wish to fill in, and enter the relevant
information.
2. Press [Save] when finished.
Tip
• To create an entry, at least one field must be filled (“Last
Name”, “First Name”, “Add Phone Number” or “Add Email
Address” for the handset memory; “Name”, “Add Phone
Number” or “Add Email Address” for the SIM/USIM memory).
“Phonebook” → “Add New”
Adding a Thumbnail to Entries
“Call Manager”
→
“Phonebook”
1. Highlight the desired entry.
2. Press [Options] and select “Edit”.
3. Select “Picture”.
4. Select “Assign Picture”.
5. Select the desired picture.
6. Press [Save] when finished.
Note
• If you delete a picture in the handset memory, the
corresponding thumbnail is also deleted.
Viewing My Card
You can register and edit your own information in the
Phonebook as with other Phonebook entries.
“Call Manager”
(M 8-4)
→
“My Card”
Copying Phonebook Entries between SIM/
USIM Card and Handset
“Call Manager” → “Advanced” → “Copy All Entries”
1. Select “From SIM to Handset” or “From Handset to
SIM”.
Note
• When you insert the SIM/USIM card into your phone for the
first time and start the Phonebook application, the
confirmation screen is displayed automatically, asking you if
you wish to copy or not. The number of Phonebook entries to
be copied varies depending on the SIM/USIM capacity.
• If the memory space is not enough to save all entries, you
cannot complete copying.
Dialling from the Phonebook
“Call Manager” → “Phonebook”
1. Highlight the desired entry and press D.
Tip
• If more than one phone number is registered for the entry,
highlight the desired phone number after step 1 and press
D.
• You can also dial from the details screen of the Phonebook.
On the details screen, select the desired phone number and
press D.
Call Manager45
Editing Phonebook Entries
“Call Manager” → “Phonebook”
1. Highlight the entry you wish to edit.
2. Press [Options] and select “Edit”.
3. Modify the information.
4. Press [Save] when finished.
Assigning a Ringtone or a Ring Video Clip
File to Each Entry
“Call Manager” → “Phonebook”
1. Highlight the desired entry.
2. Press [Options] and select “Edit”, then select “Assign
Tone/Video”.
3. Select “For Voice Call”, “For Video Calling” or “For New
Message”.
4. Select “Assign Tone” or “Assign Video”.
When selecting “Assign Video”, go to step 6.
5. Select “Preset Sounds” or “Sound Gallery”.
6. Select the desired tone or video clip.
7. Press [Save] when finished.
46Call Manager
Deleting Phonebook Entries
Deleting All Phonebook Entries
“Call Manager”
1. Select “Handset Entries” or “SIM Entries”.
2. Enter your handset code.
The default handset code is “9999”. For details on
changing the handset code, see “To Change the Handset
Code” on page 116.
Deleting a Phonebook Entry
“Call Manager”
1. Highlight the desired entry.
2. Press [Options] and select “Delete”.
→
“Advanced” → “Delete All Entries”
→
“Phonebook”
Manage Group
Different ringtones can be set for each group. If you do not
change a group ringtone, the ringtone assigned in the Settings
menu is used.
“Call Manager”
(M 8-2)
→
“Manage Group”
1. Highlight the desired group.
2. Press [Options] and select “Assign Tone/Video”.
3. Select “For Voice Call”, “For Video Calling” or “For New
Message”.
4. Select “Assign Tone” or “Assign Video”.
When selecting “Assign Video”, go to step 6.
5. Select “Preset Sounds” or “Sound Gallery”.
6. Select the desired tone or video clip.
For details on selecting a ringtone or a ring video clip file in
the Settings menu, see “Assigning a Ringtone” or
“Assigning a Ring Video Clip File” on page 102.
Note
• You can only edit group names in the SIM/USIM card. You
cannot edit the ringtone or ring video settings.
Editing the Group Name
You can edit group names to be assigned to the Phonebook
entries. First, change the Phonebook displayed (p. 44).
→
“Call Manager”
“Manage Group”
1. Highlight the desired group name.
2. Press [Options] and select “Edit Name”.
3. Modify the name.
Message Groups
You can create a mailing list to send the same message to a
group of recipients at once. Up to 5 groups can be registered.
Creating a New Mailing List
“Call Manager”
Group”
(M 8-5)
→
“Message Groups” → “Add New
1. Enter the group name.
The new group name is displayed following the last group
on the Group List screen.
Call Manager47
Adding Recipients to a Group
Up to 20 recipients can be registered in each list.
“Call Manager”
→
“Message Groups”
1. Select the desired group name.
2. Select “Assign New Entry”.
3. Select the desired entry.
The detailed screen is displayed.
4. Select the desired phone number or Email address.
Tip
• If you modify the entry assigned in the group, you need to
reassign it to the group. Press [Options] and select “Reassign Entry” in step 2.
• To remove an entry from the group, press [Options] and
select “Remove Entry” in step 2.
• To remove a group, highlight a group name and press
[Options] and then select “Delete” in step 1.
Sending a Message Using a Mailing List
→
“Call Manager”
“Message Groups”
1. Highlight the desired group name.
2. Press [Options] and select “Create Message”.
3. Select the desired type of messaging.
For further procedures, see “Creating a New Message” on
page 59.
48Call Manager
Memory Status
This function helps you to check the memory used in the
Phonebook.
“Call Manager”
Speed Dial List
You can set a maximum of 8 phone numbers in the Speed Dial
list (p. 22).
Setting Phonebook Entries in the Speed Dial List
“Call Manager”
1. Select the desired entry.
2. Highlight the desired phone number.
3. Press [Options] and select “Add to Speed Dial”.
4. Select the desired location.
Tip
• The nine digit keys correspond to list numbers.
→
“Advanced” → “Memory Status”
(M 8-3)
→
“Phonebook”
To Edit the Speed Dial List
“Call Manager”
→
“Speed Dial List”
1. Highlight the entry you wish to edit.
2. Press [Options] and select “Re-Assign” (or “Assign”).
Sending a Phonebook Entry
“Call Manager” → “Phonebook”
1. Highlight the desired entry.
2. Press [Options] and select “Send Phonebook”.
3. Select “As Message”, “Via Bluetooth” or “Via Infrared”.
For “As Message”
For details, see “MMS” on page 59.
For “Via Bluetooth”
For details, see “Bluetooth” on page 119.
For “Via Infrared”
For details, see “Infrared” on page 121.
Receiving a Phonebook Entry
When the phone receives a Phonebook entry, a confirmation
message is displayed in standby.
1. Press [Yes].
The received entry is saved in the Phonebook. Press [No]
to reject.
Tip
• For details on entering Infrared or Bluetooth wireless
settings, see “Connectivity” on page 119.
Sending a Voice Clip Message or Video Clip
Message Using an Address from the
Phonebook
“Call Manager” → “Phonebook”
1. Highlight the desired entry including the phone number
or Email address you wish to use.
2. Press [Options] and select “Create Message”.
3. Select “Voice Message” or “Video Message”.
For further procedures, see “Creating a New Message” on
page 59.
Call Manager49
Camera
Your phone has a built-in digital camera that allows you to take
pictures and record video clips wherever you are. This section
starts with basic functions and operational procedures to take,
save and send pictures and video clips, followed by common
and unique functions to camera and video modes.
(M 5)
Taking Pictures
“Camera”
1. Press to take the picture.
The shutter sounds and the still image of the taken picture
is displayed.
2. Press [Save].
The taken picture is saved in Gallery.
To cancel, press [Cancel].
To send the taken picture, press in step 2.
Note
• Press Y instead of in the viewer position of the
display.
• When the video camera is launched, press [Options] and
select “Go to Photo Camera”, or press cor Z (in the
viewer position of the display) to go to the photo camera
mode.
50Camera
• When you try to send the picture that has too large a file size,
the picture size is resized for the message. The original sized
picture is saved in Gallery.
Tip
• You can activate the camera by long pressing Y. Simply
press Y to take pictures, and start and stop recording.
• You can lock the focus by pressing D or pressing Y
halfway before taking a picture or recording a video clip.
Taking a Self-Portrait
You can take a self-portrait while looking at the main display.
“Camera”
1. Press [Options] and select “Switch to Int. Camera”.
Or press H in the viewfinder mode.
2. Press to take the picture.
3. Press [Save].
The taken picture is saved in Gallery.
To return to the external camera, pr ess [Options] and select
“Switch to Ext. Camera” or press H in the viewfinder
mode.
To Take a Picture in the Self-Portrait Position
You can take a self-portrait with the external camera.
1. Rotate the main display 180° clockwise from the normal
position.
2. Press Y on the side of the phone.
Note
• Do not rotate the main display anti-clockwise. Otherwise,
the phone may malfunction.
Exiting from the Camera Mode in the Viewer Position of
the Display
1. Long press Z in the viewer position.
Recording Video Clips
You can record a video clip with your phone. You can also use
this function in the viewer position of the display.
Recording Video Clips
“Camera”
The preview is displayed on the screen.
1. Press .
Press Y in the viewer position of the display.
2. To stop recording, press .
3. Select “Save”.
The video clip is saved in Gallery.
To view the preview before saving, select “Preview”.
To send the video clip, select “Save and Send”. Then select
the desired way you wish to send. For further procedures,
see “Creating a New Message” on page 59.
Note
• You can only send video clips when “For Message” is
selected for the recording time. For details, see “Selecting
the Recording Time” on page 57.
Using the Options Menu in the Viewer
Position of the Display
1. Press X.
The Options menu is displayed graphically.
2. Press V or W to highlight the desired option and then
press Y to make the selection.
Common Functions in the Photo and Video
Camera Modes
Using the Digital Zoom Function
To Adjust the Zooming Ratio
1. In the viewfinder mode, press a or b.
Once the phone has returned to standby, the zoom settings
return to default.
Camera51
To Enable the Optical Zoom
The optical zoom enables you to zoom the picture more clearly
by the actual zooming action of the optical lens. The optical
zoom is used up to the [×2] zooming ratio. If the zoom exceeds
[×2], the digital zoom is used to further magnify.
→
“Camera”
[Options] → “Settings” → “Optical Zoom”
1. Select “Enable”.
Select “Disable” to disable.
If you select “Disable”, you can only use the digital zoom
function.
2. Press a or b.
Once the phone has returned to standby, the zoom settings
return to default.
Adjusting the Exposure
→
“Camera”
[Options] → “Exposure”
1. Press a (Bright) or b (Dark).
: (Bright → Normal → Dark)
Once the phone has returned to standby, the brightness
settings return to default.
52Camera
Mobile Light
To Change the Mobile Light Mode
Set the mobile light according to your purpose.
→
“Camera”
→
“Switch On/Off”
[Options] → “Modes” → “Mobile Light”
1. Select the desired mode.
“On” ( ):The light is always on.
“Automatic” ( ): The li ght turns on if the phone detects
“Low Light” () (photo camera mode only):
“Off”:The light is always off.
The corresponding indicator is displayed on the screen.
“Against Sun” ( ): Suited for avoiding objects being
“Portrait” ():Suited for a portrait.
“Portrait in Dark” ( ):
Selecting the Picture Effects
You can take a picture with special effects.
“Camera”
Effects”
→
range.
silhouetted against the light.
Suited for a portrait indoors or in dim
light.
[Options] → “Modes” → “Camera
1. Select the desired effects.
The following five modes are available:
“Off”:The camera effect is cancelled.
“Sepia”:Creates a sepia-tone image.
“Monochrome”: Creates a black and white image.
“Negative”:Creates a negative image.
“Sketch”:Creates a sketch-like image with
Note
• You cannot use the Camera Effects function for picture sizes
larger than 480
contours of objects outlined.
×
640 dots.
Camera55
Continuous Shoot
You can take continuous shoots in various options.
“Camera”
Shoot”
→
[Options] → “Modes” → “Continuous
1. Select the desired mode.
The following continuous shoot modes are available:
“Off”:The continuous shoots are
“4 Pictures”/“9 Pictures” ( /):
“Overlapped” ( ): Overlaps continuous pictures into
“Bracket” (): Takes 9 continuous pictures with
56Camera
cancelled.
Takes 4 or 9 pictures continuously.
After selecting this mode, select
from five types of speed or
“Manual”.
one picture and makes an
afterimage.
After selecting this mode, select
“Fast” or “Normal”.
various colours and brightness
levels.
After selecting this mode, press
then select “Fast” or “Normal”.
Note
• When you select “Manual” to take continuous pictures,
press (or Y in the viewer position of the display)
manually in the desired speed.
• When the Timer and Continuous Shoot functions are
simultaneously set, “” (for “4 Pictures”, for example) is
displayed instead.
• You cannot use the Continuous Shoot function for picture
sizes larger than 768
“Overlapped” and “Very Fast” for “4 Pictures” are not
available for picture sizes larger than 480
Selecting a Frame
You can select the frame from preset patterns or Picture
Gallery.
“Camera”
→
×
1024 dots. “9 Pictures”,
×
640 dots.
[Options] → “Modes” → “Add Frame”
1. Select “Preset Frames” or “Picture Gallery”.
2. Select the desired frame.
The selected frame is confirmed on the display.
3. Press .
Note
• Images larger than 240
×
320 dots cannot be used.
Using the Full Screen
You can display the preview on the full screen without the soft
key area and indicator area.
→
“Camera”
[Options] → “Settings”
1. Select “Full Viewfinder”.
To return to the normal viewfinder, select “Normal
Viewfinder”.
Selecting the Shutter Sound
“Camera”
Sound”
→
[Options] → “Settings” → “Shutter
1. Select the desired shutter sound from 3 preset patterns.
Note
• Continuous Shoot uses the specialised shutter sound that
cannot be changed from the above settings.
• The shutter sound remains active even when “Ringer
Volume” (p. 101) is set to “Silent” to prevent unauthorised
use.
Functions in the Video Camera Mode
Selecting the Recording Time
“Camera”
1. Select “For Message” or “Extended Video”.
2. Select “Large(QCIF)” or “Small(SubQCIF)” picture size
Note
• If you select “For Message” for the recording time, the file
• “Save and Send” is not displayed after recording in the
→
[Options] → “Record Time”
For Message ():
Extended Video ():
for “For Message” and “QVGA(asf)”, “Large(QCIF)” or
“Small(SubQCIF)” picture size for “Extended Video”.
size is limited depending on the service provider.
Extended Video mode.
Limits the size to send a message
depending on service providers.
Less than 30 minutes (depending on
the memory).
Camera57
Recording Video Clips with the Sound
To record a video clip with the sound, the microphone needs to
be activated.
→
“Camera”
[Options] → “Settings” → “Microphone”
1. Select “On” or “Off”.
Note
• The microphone is already turned on in the default setting.
Select “Off” to record a video clip without the sound.
• The file size of a video clip can be reduced if the sound is not
recorded.
Video Encoding
→
“Camera”
Encode”
[Options] → “Settings” → “Video
1. Select the appropriate format.
58Camera
Messages
Your phone allows you to send and receive text, multimedia and
Email, and receive WAP alerts as well.
(M 4)
SMS
SMS allows you to send text messages up to 765 characters
long. If you send a message of more than 160 characters, it is
split into several segments.
MMS
MMS allows you to send and receive multimedia messages of
up to 300 KB with images, sound, or video clips attached.
Email
Email allows you to send messages of up to 300 KB.
Note
• Some MMS functions may not always be available
depending on your network. Contact your network operator
for more information.
• Maximum message size varies depending on the settings by
the network operator.
Creating a New Message
(SMS/MMS)
→
“Create Message” → “Message”
A
(Email)
A
→
“Create Message” → “E-mail”
(M 4-1)
1. Select the address field.
2. Select the desired method to enter the address.
3. For MMS, enter or select the Email address or phone
number from the Phonebook list. For SMS, enter or
select a phone number. For Email, enter or select an
Email address.
• To add multiple Email addresses or phone numbers,
highlight the recipient field, press [Options], select “Edit
Recipients”, then select “Phonebook”. Enter or select
the Email address or phone number from the existing
Phonebook.
• To change the recipient types, press [Options], select
“Edit Recipients”, then select “Change to CC” or
“Change to BCC”.
• To add a subject, press [Options] and select “Add
Subject”.
4. Place the cursor in the message field.
5. Enter the message.
Messages59
6. Highlight the “Send” indicator in the lower left of the
screen. Press and select “Send”.
After the message is sent, the message is moved to the
Sent box.
Tip
• To send the same message to a group of recipients, select
“Select Group” in step 2, then select the desired group
name. For details on creating a mailing list, see “Creating a
New Mailing List” on page 47.
To Add a Slide Show
1. In step 5 in “Creating a New Message” on page 59,
press [Options] and select “Add Slide”.
If you wish to add more slides, select “Add Slide Before” or
“Add Slide After”.
2. Enter the message.
If you wish to set the duration of each slide, press [Options]
and select “Slide Duration”, then select the desired
duration.
Tip
• You can create messages up to 300 KB. Each slide can
contain one picture and/or one sound file or video clip.
60Messages
To Remove or Replace Attachments
1. In step 5 in “Creating a New Message” on page 59,
press [Options] and select the corresponding remove
option for each attachment.
To Attach Gallery Data
1. In step 5 in “Creating a New Message” on page 59,
highlight the “Picture”, “Sound” or “Video” indicator in
the lower centre of the screen, and press .
• “Delivery Time” (“No delay”, “30 minutes”, “1 hour”, “6
hours”, “1 day”, “1 week”) (MMS): Sets the time the
message is delivered after the Send key is pressed.
2. Highlight the “Send” indicator in the lower left of the
screen. Press and select “Send”.
After the message is sent, the message is moved to the
Sent box.
Messages61
Note
• The current message size displayed while you are creating
the message is an approximation.
• If a message cannot be sent for some reason, the message
stays in the Outbox and the “ ” is displayed in standby.
Tip
• To save the message without sending, press [Options] and
select “Save to Drafts” in step 5 in “Creating a New
Message” on page 59.
• You can send the following items attached to multimedia
messages. Details are given in the following sections.
• Gallery data
• Phonebook entry
• File (Schedule entry created by Calendar, Phonebook
entry), etc.
• You can use the template option to help you compose
messages. For details on using this option, see “Using
Templates” on page 42.
62Messages
Sending a Message in the Drafts Box
→
“Drafts”
A
(M 4-4)
1. Select the desired tab, SMS/MMS or Email.
2. Press [Options] and select “Edit & Send”.
3. Modify the message, if necessary.
4. Highlight the “Send” indicator in the lower left of the
screen. Press and select “Send”.
Reading Message
Messages you receive are saved in the Inbox.
A
→
“Inbox”
1. Select the message you wish to view.
Storing the Phone Number of a Sender in the Phonebook
A
→
“Inbox”
1. Highlight the message from which you wish to store the
phone number or Email address.
2. Press [Options] and select “Save Address”.
The new Phonebook entry screen including the phone
number is displayed. For details on creating a new
Phonebook entry, see “Add New” on page 44.
Calling the Phone Number of a Sender Embedded in the
Message
A
→
“Inbox”
1. Highlight the message including the phone number you
wish to dial.
2. Press [Options] and select “Call Sender”.
Downloading a Single MMS
A
→
“Inbox”
1. Highlight the message alert ( ) you wish to download.
2. Press [Options] and select “Download”.
Tip
• You can download multiple messages at the same time. See
“Downloading Multiple MMS”.
Downloading Multiple MMS
→
“Inbox”
A
1. Press [Options] and select “Advanced”.
2. Select “Multiple Select”.
3. Select the desired message alert using the “Select” or
“Select All” option.
4. Select “Download”.
The selected messages are downloaded at the same time.
Replying to a Message or to All Addresses
A
→
“Inbox”
1. Highlight the message the sender of which you wish to
reply to.
2. Press [Options] and select “Reply” or “Reply all”.
3. Select “Reply” or “Reply with History”.
4. Enter the message.
5. Highlight the “Send” indicator in the lower left of the
screen. Press and select “Send”.
Forwarding a Message
→
“Inbox”
A
1. Highlight the message you wish to forward.
2. Press [Options] and select “Forward”.
3. Perform steps 1 to 5 in “Creating a New Message” on
page 59.
Messages63
Sorting the Messages in the List
A
→
“Inbox”
1. Press [Options] and select “Advanced”.
2. Select “Sort”.
3. Select the desired sort type.
Locking or Unlocking the Messages
A
→
“Inbox”
1. Highlight the message you wish to lock or unlock.
2. Press [Options] and select “Advanced”.
3. Select “Lock” or “Unlock”.
Cell Broadcasts
You can receive cell broadcast messages or general messages
such as weather forecasts and traffic reports. This information
is broadcast to subscribers in certain network areas.
This function may not be available on all mobile phone
networks. Contact your network operator for more information.
Enabling/Disabling Cell Broadcasts
→
“Cell Broadcasts” → “Switch On/Off”
A
(M 4-9)
1. Select “On” or “Off”.
64Messages
Reading Cell Broadcast Messages
A
→
“Cell Broadcasts” → “Read Messages”
1. Select the desired subject.
2. Scroll the screen to read the message.
3. Press [Back].
Setting Languages for Cell Broadcast Messages
A
→
“Cell Broadcasts” → “Settings” → “Language”
The current language is displayed.
1. Press .
2. Press to check.
3. Press [Save].
Subscribing to Cell Broadcasts
Select the page of the cell broadcast message that you want.
→
“Cell Broadcasts” → “Settings” → “Set Info
A
Subjects”
→
[Options]
1. Select “Add/Remove”.
2. Select the desired page.
3. Press [Back].
Tip
• If the desired page is not in the list that appears in step 2,
select “Create Subject” in step 1, then enter the subject code
to add a page. For details on the subject code, contact your
service provider.
Area Info
The Area Info is the message information that operators send
to subscribers in certain areas.
When you receive Area Info, the message (area code) is
displayed in standby.
Enabling/Disabling Area Info
A
→
“Area Info”
(M 4-10)
1. Select “On” or “Off”.
Note
• This function may not be available on all mobile phone
networks. Contact your network operator for more
information.
• If Area Info is set to “On”, the standby time will decrease.
Messaging Settings
General Settings
A
→
“Messaging Settings” → “General Settings”
(M 4-11)
1. Select the item you wish to set up.
•“Home Download”:
Controls message download timing inside your network
area.
“Always Download”: Downloads messages
“Always Defer”: Defers message download.
• “Roaming Download”:
Controls message download timing when roaming
outside of your network.
“Always Download”: Downloads messages
“Always Defer”: Defers message download.
• “Delivery Report”:
Enables or disables Delivery Report request.
• “Read Report”:
Enables or disables Read Report request.
immediately from the server.
immediately from the server.
Messages65
• “Expiry Time”:
This indicates the number of days and hours for which
a message you send may remain undelivered to the
message recipient. During this period, the message
service centre will continually try to deliver the message
to the recipient.
• “Delivery Report Allow”:
Confirms whether or not a report is sent notifying the
sender when you receive an MMS/SMS.
• “Read Report Allow”:
Enables or disables Read Report Allow when the
recipient is required to inform the sender that the
message has been read.
• “Edit Signature”:
Opens the screen to enter the signature.
•“Auto Delete”:
Deletes the oldest message automatically, when the
Inbox, Sent or both (Inbox and Sent) is full.
• “Automatic Resend”:
Tries to rese nd the failed SMS/MMS message up to two
times (“On” or “Off” selection).
• “Message List View”:
Switches the mailbox listing between “One-line View”
and “Two-line View”.
66Messages
SMS Settings
→
“Messaging Settings” → “SMS Settings”
A
1. Select the item you wish to set up.
• “Message Centre”:
Enter the message centre number.
If you wish to enter a country code for a message to an
international number, long press Q until a + sign is
displayed.
• “Message Format”:
Select the message format to be used when creating a
new message.
•“Reply Path”:
Accepts or rejects the same reply path with the send
path when receiving the reply message for your
message.
MMS Settings
A
→
“Messaging Settings” → “MMS Settings”
1. Select the item you wish to set up.
• “MMS Accounts”:
Select the desired account or select “Create New” to
enter the following settings.
“Profile Name”:MMS profile name (Unique name)
“Proxy”:Proxy setting for MMS
“Relay Server URL”: MMS relay server
•“Slide Duration”:
Sets the duration of the slide.
• “Max Message Size”:
Defines the maximum size of downloaded and created
MMS messages.
• “Creation Mode”:
When set to “Free”, you can attach files of any format to
the mail. When set to “Restricted”, only certain formats
and message sizes can be attached. The “Restricted”
setting has priority over “Max Message Size”.
Email Settings
→
“Messaging Settings” → “Email Settings”
A
1. Select the item you wish to set up.
• “Email Accounts”:
Select the desired account or select “Create New” to
enter the following settings.
“Account Name”:Email account name (Unique
“POP3 Server”:Server name, user ID, password
“SMTP Server”: Server name, user ID, password,
“Access Point”:Access point for Email
“Email Address”:Email address
• “Download Interval”:
Sets the download interval.
• “Max Message Size”:
Defines the maximum size of downloaded and created
MMS messages.
name)
and port number for POP3 server
port number for SMTP server and
SMTP Authentication
Messages67
Browser
Your phone is already configured to access SmarTone iN! and
the mobile internet.
SmarTone iN! is a new mobile internet portal which is your
gateway to a new world of information, games, music and
services.
Because your phone uses 3G (UMTS), it has a system that is
faster than previous ways of getting mobile information. Also,
the connection is ‘always on’ which means there is no need to
wait for dialling up. You only have to pay for the data you send
or receive, not how long you’re connected.
Your phone contains a WAP browser used for surfing on the
Mobile Internet, where you can get a lot of useful information.
Normally, pages are designed for a mobile phone.
Your phone is already setup to SmarTone iN! site for WAP/MMS
Settings.
68Browser
(M 2)
Main Menu
→
“Browser”
The SmarTone iN! service page is displayed.
“Browser”
The URL entry screen is displayed, allowing you to jump to a
site.
“Browser”
See page 69.
“Browser”
WAP Push alerts are displayed.
“Browser”
The saved screenshots are displayed.
“Browser”
The history of pages you have recently browsed is displayed.
“Browser”
See page 71.
“Homepage”
→
“Go to URL”
→
“Bookmarks”
→
“Alert Inbox”
→
“My Saved Page”
→
“Access History”
→
“Browser Settings”
Navigating a WAP Page
• abcd:
Move the highlights around in the screen.
•:Executes the option displayed in the lower
centre of the screen.
• A:Launches the browser option menu.
• C:Selects an action displayed in the lower right of
the screen.
Used to access “SmarTone iN!” by opening the
browser.
• F (short press):
Exits the browser.
(long press):
Turns off the phone.
Editing Bookmarks
“Browser” → “Bookmarks”
1. Select the desired URL, and press [Options].
You can edit the list of Bookmarks by the following options:
“Open”:Selects a bookmark.
“Details”:Displays detailed information of
the WAP page.
“Send page”:Sends the URL address to
recipients.
“New”:Creates new folders or
bookmarks.
“Rename”:Renames bookmarks.
“Edit URL”:Edits URL address of the
bookmark.
“Move”:Moves bookmarks to another
location.
“Delete”:Deletes bookmarks.
“Delete All”:Deletes all bookmarks.
Browser69
The Browser Options
You can use various options of the WAP browser.
C
→
[Options]
“Select”:Selects a WAP page.
“Home”:Goes to the homepage.
“Alert Inbox”:Displays WAP Push alerts.
“Bookmarks”:(see “Editing Bookmarks” on
page 69.)
“Mark Page”:Marks the selected WAP page.
“Save This Link”:Save the selected link.
“Save Items”:Saves items from WAP pages.
“Go to URL”:Goes to the WAP page that you
enter the URL address.
“Access History”:Shows the history where you
have browsed.
“Forward”:Goes to the next page of the
pages displayed.
“Reload Page”:Reloads the WAP page again to
get new information.
“Advanced”:Displays the advanced menus.
“Exit”:Exits the browser.
70Browser
The Advanced Options
→
[Options] → “Advanced”
C
“My Saved Page”:Displays the bookmarked pages.
“Save This Page”:Saves the W AP page as the local
file.
“Send Page”:Sends the WAP page data.
“Details”:Shows detailed information of
the WAP page.
“Browser Data”:Edits the browser data. You can
clear the cache/cookies/history.
“Search This Page”:Searches specific words in the
WAP page.
“Copy Text”:Copies the text on the web page.
“Browser Settings”:Displays the Settings menus.
“Restart Browser”:Restarts the browser.
“About”:Displays the browser
information.
Browser Settings
“Browser” → “Browser Settings”
“Font Size”:Sets the size of the browsing
“Scroll Step”:Sets the speed of scrolling.
“Send Referrer”:Enables or disables the
“Cookies”:Adjusts the setting of cookies.
“Downloads”:Disables downloading data from
“Security”:Adjusts the security prompt
“WAP Push”:Sets whether you need
“Download to”:Sets the download location.
(M 2-7)
font.
notification of the referrer.
the images/sounds/objects.
level.
confirmation for push message.
Browser71
Media Player
Media Player can play sound files and video clip files.
TV & Video
Playing Back Video Clip Files
“Media Player”
(M 7)
(M 7-1)
→
“TV & Video” → “Video Gallery”
1. Select “Handset Memory” or “Memory Card”.
2. Select the desired file.
To pause playback, press .
To stop playback, press [Back].
Tip
• You can control the Video Player by using the following keys:
a/b: Increases or decreases the volume.
b (long press): Mutes.
d: Jumps to the next file.
c: Returns to the top portion of the current file.
d (long press): Fast-forwards.
c (long press): Rewinds.
Searching a File to Be Played Back
→
“Media Player”
“TV & Video” → “Video Gallery”
1. Select “Handset Memory” or “Memory Card”.
2. Select “All Videos” or the desired playlist.
72Media Player
3. Press [Options] and select “Search”.
4. Enter the first few letters of the title.
Search results are displayed and the matching file is
highlighted.
Adding a File to the Playlist
You can create a playlist registering desired files.
→
“Media Player”
“TV & Video” → “Video Gallery”
1. Select “Handset Memory” or “Memory Card”.
2. Select “All Videos” or the desired playlist.
3. Highlight the file you wish to add to the playlist.
4. Press [Options] and select “Add to Playlist”.
The playlists are displayed. For details on creating a
playlist, see “Adding a New Playlist” on page 73.
5. Select the desired folder.
6. Press .
The file highlighted in step 3 is saved.
To delete files from the playlist, highlight the playlist and
press [Options]. Then select “Delete from Playlist”.
Adding a New Playlist
“Media Player”
→
“TV & Video” → “Video Gallery”
1. Select “Handset Memory” or “Memory Card”.
2. Press [Options] and select “Add New Playlist”.
3. Enter the desired playlist name.
4. Press .
Note
• To delete the playlist, highlight the playlist and press
[Options]. Then select “Delete Playlist”.
Editing the Video Clip File
→
“Media Player”
“TV & Video” → “Video Gallery”
1. Select “Handset Memory” or “Memory Card”.
2. Select “All Videos” or the desired playlist.
3. Select the file you wish to edit.
4. Press [Options] and select “Edit”.
5. Select the desired option.
“Crop”: Select the desired area to be cropped.
“Subtitle”: Create a subtitle to add to the file.
Settings
You can select a play mode for “Playback Pattern”, “Backlight”
and “Display Size” when playing back video clip files.
→
“Media Player”
“TV & Video” → “Video Gallery”
1. Select “Handset Memory” or “Memory Card”.
2. Select “All Videos” or the desired playlist.
3. Select the file for which you wish to adjust the play
mode.
4. Press [Options] and select “Settings”.
5. Select “Playback Pattern”, “Backlight” or “Display
Size”.
6. Select from the following:
• “Playback Pattern”
“Normal”:Plays back all files in the selected
“Repeat”: Continues playback in the selected
“Repeat All”:Plays back all files in the selected
“Random”:Plays back files in the selected
folder once and stops playback.
folder.
folder.
folder at random.
Media Player73
• “Backlight”
“Always On”: Lit while the file is played back.
“Always Off”:Unlit while the file is played back
“Normal Settings”: Works with the main backlight
•“Display Size”
“Original Size”: Displays the file in its original size.
“Enlarge”:Displays the file in an enlarged
“Full Screen”:Displays the file on the full screen.
SD VIDEO
Video clips that are recorded by a video camera or downloaded
from mobile Internet sites can also be managed with SD VIDEO.
“Media Player”
even if a key is pressed.
setting (p. 106).
size.
→
“TV & Video” → “SD VIDEO”
1. Select the desired file.
To pause playback, press .
To stop playback, press C.
To delete files from the playlist, highlight the playlist, press
[Options] and select “Delete”.
Downloading Video Clip Files
→
“Media Player”
The video clip file download site is displayed.
74Media Player
“TV & Video” → “Download Videos”
Music Player
You can play bac k MP3, AAC and AAC+ format sound files with
Music Player. While playing back sound files in the
background, you can use other menus.
Playing Back Sound Files
“Media Player”
(M 7-2)
→
“Music Player” → “My Music”
1. Select “All Music” or the desired playlist.
2. Select the desired file.
To pause playback, press .
To stop playback press [Back].
Note
• You are asked whether or not to play sounds when the Silent
mode is activated.
• To play the last played file, select “Last Played Music”.
“Currently Playing” is displayed when the file is being played
back.
Tip
• You can return to the Main menu screen while playing back
the file in the background.
• You can create your playlist by selecting only the desired files
(p. 75).
• You can make tone adjustment in step 2. Press [Options] and
select “Tone Control”. Select “Normal”, “Bass”, “Surround”
or “Surround Bass”.
• You can select the playback pattern in step 2. Press
[Options] and select “Playback Pattern”.
“Normal”:Plays back all files in the selected folder
“Repeat”:Continues playback in the selected folder.
“Repeat All”:Plays back all files in the selected folder.
“Random”:Plays back files in the selected folder at
• You can control the Music Player by using the following keys:
a/b: Increases or decreases the volume.
b (long press): Mutes.
d: Jumps to the next file.
c: Returns to the top portion of the current file.
d (long press): Fast-forwards.
c (long press): Rewinds.
F: Plays back the file in the background.
Searching a File to Be Played Back
“Media Player”
once and stops playback.
random.
→
“Music Player” → “My Music”
1. Select “All Music” or the desired playlist.
2. Press [Options] and select “Search”.
3. Enter the first few letters of the title.
Search results are displayed and the matching file is
highlighted.
Adding a File to the Playlist
You can create a playlist registering desired files.
→
“Media Player”
“Music Player” → “My Music”
1. Highlight the file you wish to add to the playlist.
2. Press [Options] and select “Add to Playlist”.
The playlists are displayed. For details on adding a playlist,
see “Adding a New Playlist”.
3. Select the desired folder.
4. Press .
The file highlighted in step 1 is saved.
To delete the playlist, highlight the playlist and press
[Options]. Then select “Delete Playlist”.
Adding a New Playlist
→
“Media Player”
“Music Player” → “My Music”
1. Press [Options] and select “Add New Playlist”.
2. Enter the desired playlist name.
3. Press .
Downloading Music Files
“Media Player”
Music”
The music file download site is displayed.
Note
• This service is not available with some service providers.
Please contact your service provider for more information.
→
“Music Player” → “Download
Media Player75
Gallery
Gallery contains several types of picture, sound and video clip
data. Also included in Gallery are frequently used text message
phrases and accessed WAP pages (addresses) which you can
use. You can also transmit picture, sound and video clip data
via infrared or Bluetooth wireless technology to OBEX-enabled
phones.
Picture Gallery
Pictures that are taken by a digital camera or images that are
downloaded from mobile Internet sites can be managed. You
can register pictures in the following formats: JPEG, PNG,
WBMP and GIF.
Viewing Pictures
“Gallery”
(M 6)
(M 6-1)
→
“Picture Gallery”
1. Select the file you wish to view.
The selected picture is displayed.
Switching the Memory Source
→
“Gallery”
“Picture Gallery”
1. Select the file you wish to view.
The selected picture is displayed.
To display the list from the memory card, press d.
To go back to the handset memory, press c.
76Gallery
Using Images as Wallpaper
→
“Gallery”
“Picture Gallery”
1. Highlight the file you wish to use as wallpaper.
2. Press [Options] and select “Set as Wallpaper”.
Saving an Image to Phonebook Entries
You can use this option only for pictures saved in the handset
memory.
→
“Gallery”
“Picture Gallery”
1. Highlight the file you wish to add to Phonebook.
2. Press [Options] and select “Save to phonebook”.
To overwrite, select the data you wish to save.
To save as a new entry, select “As New”.
For details on entering a name, see “Add New” on page 44.
Editing Pictures
“Gallery”
→
“Picture Gallery”
1. Highlight the file you wish to edit.
2. Press [Options] and select “Picture Editor”.
3. Select the desired option.
Note
• “Picture Editor” may not be available depending on the
original picture and copyright issued.
Adjusting the Size
You can adjust the picture to an appropriate size depending on
the scene.
→
“Gallery”
“Picture Gallery”
1. Highlight the file you wish to adjust the size of.
2. Press [Options] and select “Resize”.
3. Select the desired option.
Note
• “Resize” may not be available depending on the original
picture and copyright issued.
Tip
• For other option menus, see “Common Option Menus” on
page 79.
Downloading Picture Files
→
“Gallery”
The picture file download site is displayed.
Video Gallery
Video clips that are recorded by a video camera or video clips
that are downloaded from mobile Internet sites can be
managed.
Playing Back Video Clip Files
“Gallery”
“Picture Gallery” → “Download More”
(M 6-2)
→
“Video Gallery”
1. Select the file you wish to play back.
2. Press .
To pause playback, press .
To resume, press again.
To stop playback, press [Back].
To display the list from the memory card, press d.
To go back to the handset memory, press c.
Gallery77
Using a Video Clip as a Ring Video
You can set your video clip to play back when the phone rings.
“Gallery”
→
“Video Gallery”
1. Highlight the desired video clip.
2. Press [Options] and select “Set as Ring Video”.
Tip
• For other option menus, see “Common Option Menus” on
page 79.
Downloading Video Clip Files
→
“Gallery”
The video clip file download site is displayed.
Sound Gallery
The downloaded sound files and the AMR data recorded by
Voice Recorder are managed in Sound Gallery. The default
ringtones are not contained within Sound Gallery. Only the
sound files you can play back with the phone are stored in
Sound Gallery.
Playing Back Sound Files
“Gallery”
“Video Gallery” → “Download More”
(M 6-4)
→
“Sound Gallery”
1. Select the file you wish to play back.
To stop playback, press .
78Gallery
Note
• This option may not be available in all regions.
Switching the Memory Source
“Gallery”
→
“Sound Gallery”
1. Press d.
The tab switches and the list is displayed from the memory
card. To go back to the handset memory, press c.
2. Select the desired sound file.
Using the Sound Files as a Ringtone
“Gallery”
→
“Sound Gallery”
1. Highlight the file you wish to use as a ringtone.
2. Press [Options] and select “Set as Ringtone”.
Note
• AMR format music files cannot be used for ringtones.
Tip
• For other option menus, see “Common Option Menus” on
page 79.
Other Documents
Some types of files are stored in the Other Documents folder of
the phone. You can edit and use these files as Gallery data.
Opening the Document File
“Gallery”
→
(M 6-7)
“Other Documents”
1. Select the desired file.
Tip
• For other option menus, see “Common Option Menus”.
Common Option Menus
Activating Files with Copyright Protection (DRM)
Some pictures, sound files, and video clips have a digital copy
protection program, which is called DRM (Digital Rights
Management). You need to activate the digital licence
permission to open the files. Files protected with DRM are
displayed with .
Select the appropriate option.
→
“Gallery”
“Gallery”
“Gallery”
“Gallery”
1. Highlight the file you wish to activate.
2. Press [Options] and select “Activate”.
“Picture Gallery”
→
“Video Gallery”
→
“Sound Gallery”
→
“Other Documents”
Note
• Some pictures with DRM may not open even when an
attempt is made to activate it.
Sending Gallery Data
Select the appropriate option.
→
“Gallery”
“Gallery”
“Gallery”
“Gallery”
“Picture Gallery”
→
“Video Gallery”
→
“Sound Gallery”
→
“Other Documents”
1. Highlight the desired file.
2. Press [Options] and select “Send”.
3. Select “As Message”, “Via Bluetooth” or “Via Infrared”.
For details on creating a message, see “Creating a New
Message” on page 59.
Bluetooth
For details on
on page 119.
For details on Infrared settings, see “Infrared” on
page 121.
wireless settings, see “Bluetooth”
Gallery79
Note
• Pictures/Sounds/Video clips protected by copyright cannot
be sent attached to a message, with the exception of
Separate Delivery files.
• When pairing, you need to enter your passcode when
establishing contact with a Bluetooth wireless technology
enabled device for the first time.
Receiving Gallery Data
When the phone receives Gallery data, a confirmation message
is displayed in standby.
1. Press [Yes].
The received data is saved in the corresponding Gallery
folder.
Tip
• For details on Infrared or Bluetooth wireless settings, see
“Connectivity” on page 119.
80Gallery
Using Gallery Data
You can copy, move, sort, rename, and delete the saved Gallery
data.
Select the appropriate option.
→
“Gallery”
“Gallery”
“Gallery”
“Gallery”
“Picture Gallery”
→
“Video Gallery”
→
“Sound Gallery”
→
“Other Documents”
1. Highlight the desired file.
2. Press [Options] and select “Advanced”.
3. Select the desired option.
“Move”:Moves files to another folder. Select
“Copy”:Copies files. Select the desired folder
“Create Folder”:Creates a new folder.
“Multiple Select”:Selects multiple files.
“Sort”:Sorts the file. Select the desired files
the desired folder to move to.
to copy to.
to sort.
To Rename the File
Select the appropriate option.
“Gallery”
“Gallery”
“Gallery”
“Gallery”
→
“Picture Gallery”
→
“Video Gallery”
→
“Sound Gallery”
→
“Other Documents”
1. Highlight the desired file.
2. Press [Options] and select “Rename”.
To Delete the File
“Gallery”
“Gallery”
“Gallery”
“Gallery”
→
“Picture Gallery”
→
“Video Gallery”
→
“Sound Gallery”
→
“Other Documents”
1. Highlight the desired file.
2. Press [Options] and select “Delete”.
To See the Gallery Details
Select the appropriate option.
→
“Gallery”
“Gallery”
“Gallery”
“Gallery”
“Picture Gallery”
→
“Video Gallery”
→
“Sound Gallery”
→
“Other Documents”
1. Highlight the file you wish to view the details of.
2. Press [Options] and select “Details”.
Selecting Multiple Files
You can select more than one item from Gallery for moving,
copying and deleting.
Note
• The following procedure applies when the entries other than
“Get new” are highlighted.
Select the appropriate option.
→
“Gallery”
“Gallery”
“Gallery”
“Gallery”
“Picture Gallery” → [Options]
→
“Video Gallery” → [Options]
→
“Sound Gallery” → [Options]
→
“Other Documents” → [Options]
1. Select “Advanced”.
2. Select “Multiple Select”.
3. Press to check the desired file names.
4. Press [Options] and select the desired option.
Tip
• To remove the check, select the file again or select
“Unselect” in step 4.
• If you wish to select all files, select “Select All” in step 4. To
unselect all, select “Unselect All”.
Gallery81
Text Templates
You can register up to 50 text templates for use in text
messages and multimedia messages. The maximum capacity
of the text templates is 100 KB.
Adding Phrases to Text Templates
“Gallery”
(M 6-6)
→
“Text Templates” → “Add New Template”
1. Enter the text and press .
Editing Text Templates
“Gallery”
→
“Text Templates”
1. Highlight the text template you wish to edit.
2. Press [Options] and select “Edit”.
To view the text template, press [Options] and select
“View”.
To delete the text template, press [Options] and select
“Delete”.
3. Modify the text and press .
82Gallery
Sending Text Templates
“Gallery”
→
“Text Templates”
1. Highlight the text template you wish to send.
2. Press [Options] and select “Send Template”.
Memory Status
This function helps you to check the memory status of the
handset memory or memory card. Memory status covers the
following.
Memory Card:Pictures, Videos, Sounds, Others, Total
“Gallery”
(M 6-8)
Others, Total and Free
and Free
→
“Memory Status”
1. Select “Handset Memory” or “Memory Card”.
Games & Applications
GSX™ & Java™ Gallery
The list of Java™ applications is displayed.
Downloaded applications are displayed in order starting from
the latest one.
Executing Applications
“Games & Applications”
Downloaded applications are sequentially displayed from the
latest one.
(M 1)
(M 1-1)
→
“GSX™ & Java™ Gallery”
1. Select the title of the application you wish to execute.
The selected application is executed. When using network
connection type applications, connection to the network
can be selected.
2. To end the application, press F and select “End”.
Setting a Screensaver Application
“Games & Applications”
→
“GSX™ & Java™ Gallery”
1. Highlight the desired screensaver application.
2. Press .
The confirmation screen to set a screensaver is displayed.
3. Press [Yes].
Downloading Applications
“Games & Applications”
→
“Download More”
→
“GSX™ & Java™ Gallery”
1. Select the application you wish to download.
The confirmation screen is displayed after various WAP
browser screens.
2. Press to start downloading.
3. Press when finished.
Games & Applications83
Setting Permission
You can set permission for selected Java™ applications.
“Games & Applications”
→
“GSX™ & Java™ Gallery”
1. Highlight the desired Java™ application.
2. Press [Options] and select “Permission”.
3. Select one of the following options:
“Network Access”:Sets permission to access the
“Messaging”:Sets permission to perform MMS
“Auto Run”:Sets permission to perform the
“Local Connection”:Sets permission to access local
“Read User Data”:Sets permission to read user data,
“Write User Data”:Sets permission to write entries in
“Use Multimedia”:Sets permission to use the
“Location Access”:Sets permission to update the
“Reset”:Clears all the above settings.
84Games & Applications
network.
and SMS messaging.
Auto Run function.
contents.
such as Phonebook entries,
mailbox (Inbox) and Gallery data.
your phone, such as Phonebook
entries, mailbox (Inbox) and
Gallery data.
multimedia recording.
positioning function.
4. Select one of the following options:
“Session”:The confirmation message is not
displayed until you exit the
application, while execution of the
API of the specified function group
is authorised.
“Ask Once”:The confirmation message is
displayed every time the API of the
specified function group is
executed.
“Blanket”:The confirmation message is not
displayed until the application is
deleted or you change the
settings, while execution of the API
of the specified function group is
authorised.
“No”:Execution of the API of the
specified function group is not
authorised.
Note
• To clear all the permission settings, select “Reset” in step 3.
• All permissions are not available for all Java™ applications.
Setting Network Access
In order to allow Java™ applications to access to the network,
you need to set the network access.
→
“Games & Applications”
→
[Options] → “Permission” → “Network Access”
“GSX™ & Java™ Gallery”
1. Select “Session”, “Ask Once”, “Blanket” or “No”.
Viewing Application Information
You can check the information of Java™ applications.
→
“Games & Applications”
“GSX™ & Java™ Gallery”
1. Highlight the desired Java™ application.
2. Press [Options] and select “Information”.
Deleting an Application
You can delete an application from the handset memory.
→
“Games & Applications”
“GSX™ & Java™ Gallery”
1. Highlight the desired Java™ application.
2. Press [Options] and select “Delete”.
Set Java™ Wallpaper
You can set Java™ Wallpaper for the standby screen.
Switching the Java™ Wallpaper On or Off
“Games & Applications”
“Switch On/Off”
(M 1-2)
→
“Set Java™ Wallpaper” →
1. Select “On” or “Off”.
Note
• If you select “On” and a Java™ Wallpaper is not set, a list
displaying available Java™ Wallpaper is displayed, asking
you to make a selection.
Set Applications
→
“Games & Applications”
“Set Applications”
The downloaded applications are displayed.
“Set Java™ Wallpaper” →
1. Select the desired Java™ Wallpaper.
Games & Applications85
Java™ Settings
Application Volume
You can set the volume of the application such as the sound
effect to one of the five levels or silent. When “Application
Volume” is set to “Silent”, this setup has priority.
“Games & Applications”
“Application Volume”
The current volume level is displayed.
(M 1-3)
→
“Java™ Settings” →
1. Press a (or d) to increase the volume or press b (or
c) to decrease the volume and then press .
Backlight
→
“Games & Applications”
“Backlight”
→
“Switch On/Off”
“Java™ Settings” →
1. Select “Always On”, “Always Off” or “Normal Settings”.
“Always On”:Lights while the application is
“Always Off”:Turns off while the application is
“Normal Settings”: Works with the main backlight setting
86Games & Applications
operated. Blinks when the blink
setting is on.
operated even if a key is pressed.
(p. 106). B links when the blink setting
is on.
To Set the Blinking Operation
This setting enables the backlight to be controlled by the
application. If set to “Off”, the backlight cannot be turned on
from the application.
→
“Games & Applications”
“Backlight”
→
“Blink”
“Java™ Settings” →
1. Select “On” or “Off”.
Vibration
When the vibrator is set in the application, you can choose
whether the operation is enabled or not.
→
“Games & Applications”
“Vibration”
“Java™ Settings” →
1. Select “On” or “Off”.
Calls & Alarms
You can set the priority of incoming calls and alarms while an
application is operating.
• “Call Priority”, “Message Priority” or “Alarm Priority”:
The application is suspended automatically, and you can
receive a call or a message, or the alarm will sound. After
finishing the call or the message, or the alarm ends, the
suspend indicator ( ) is displayed letting you know there is
a suspended application.
• “Call Notice”, “Message Notice” or “Alarm Notice”:
The marquee (character scrolls) is displayed on the first line
of the screen while the application continues. If you press
D, the application is suspended, and you can receive a call
or a message. After finishing the call or the message, the
suspend indicator ( ) is displayed letting you know there is
a suspended application.
Java™ Information
The information about the licences belonging to Java™ is
displayed.
(M 1-4)
Games & Applications87
Organiser
Calendar
Calendar allows you to easily schedule appointments or events
at any given date or time.
These entries can also be sent via infrared or Bluetooth
wireless technology to a PC to share the same schedules.
When you exchange entries with other devices, the date and
time displayed may be different to that of the original data
depending on the data format of the receiving device.
Creating a New Entry
“Organiser”
(M 3)
(M 3-1)
→
“Calendar”
1. Select the desired day to which you wish to add an
event.
2. Press [Options] and select “Add New Entry”.
3. Enter the subject.
4. Enter the location.
5. Select the desired category.
6. Enter the start date and then enter the start time.
7. Select the duration.
When selecting “Other”, enter the desired reminder date
and time.
88Organiser
8. Select the reminder time.
When selecting “Other”, enter the desired reminder date
and time.
9. Press [Save].
Note
• If the date and time settings have not been entered, the date
and time entry screen is displayed (p. 108).
• The reminder will not sound when “Ringer Volume” (p. 101)
is set to “Silent”.
To Change the Type of the Reminder Tone or Video
1. On the New Entry screen, select “Reminder”.
2. Select “Assign Tone/Video”.
3. Select “Assign Tone” and then select “Preset Sounds”
or “Sound Gallery”, or select “Assign Video”.
4. Select the desired sound or video clip file.
For details on selecting a tone, see “Assigning a Ringtone”
on page 102.
To Change the Duration of the Reminder Tone or Video
1. On the New Entry screen, select “Reminder”.
2. Select “Duration”.
3. Select the time period.
When you select “Other”, you can enter the desired time in
two digits using the keypad.
To Change the Repeat Option of the Reminder
1. On the New Entry screen, select “Repeat”.
2. Select the desired repeat option.
To Enter the Description
1. On the New Entry screen, select “Description”.
2. Enter a memo for the schedule entry.
To Make the Entry Secret
1. On the New Entry screen, select “Secret”.
2. Select “On” to make the data secret or select “Off” to
leave it as it is.
Viewing a Schedule Entry
“Organiser”
→
“Calendar”
1. Select the day you wish to view.
To Search By Date
1. In any view, press [Options] and select “Go to”.
2. Select “Today” to display today or “Enter Date” to enter
the desired date.
Tip
• In the monthly or weekly view, you can control the view by
using the following:
Monthly view
P:Displays the previous month.
R:Displays the next month.
Q:Displays the weekly view.
K:Moves the cursor to today.
c/d:Moves the cursor to left (the previous day) or to
right (the next day).
a/b:Moves the cursor upward (last week) or
downward (next week).
Weekly view
P:Displays the previous week.
R:Displays the next week.
Q:Displays the monthly view.
K:Moves the cursor to today.
c/d:Moves the cursor to left (the previous day) or to
right (the next day).
a/b:Mo ve s t he wee kl y v ie w u p o r do wn (t he pr ev iou s
hour or next hour).
Organiser89
Editing a Schedule Entry
“Organiser”
→
“Calendar”
1. Select the day you wish to edit.
2. Press [Options] and select “Edit”.
3. Select the desired item and modify the entry.
4. Press [Save].
Deleting Schedule Entries
1. In any view, press [Options] and select “Delete”.
2. Select the desired option.
“This Appointment” (daily view):
“All This Day”:Deletes all entries for the selected
“All This Week” (weekly view):
“Up to Last Week” (weekly view):
“All This Month” (monthly view):
“Up to Last Month” (monthly view):
90Organiser
Deletes the selected entry.
day.
Deletes all entries for the selected
week.
Deletes all entries before this week.
Deletes all entries for the selected
month.
Deletes all entries before this month.
“All Appointments” (weekly and monthly view):
Sending a Schedule Entry
“Organiser”
→
Deletes all entries in this application.
“Calendar”
1. Select the day including schedule entries you wish to
send.
2. Press [Options] and select “Send”.
3. Select “As Message”, “Via Bluetooth” or “Via Infrared”.
For “Via Bluetooth”
For details, see “Bluetooth” on page 119.
For “Via Infrared”
For details, see “Infrared” on page 121.
Note
• When pairing, you need to enter your passcode when
establishing contact with a Bluetooth wireless technology
enabled device for the first time.
Receiving a Schedule Entry
When the phone receives a schedule entry, a confirmation
message is displayed in standby.
1. Press [Yes].
The received entry is saved in the Calendar.
Press [No] to reject.
Tip
• For details on entering Infrared or Bluetooth wireless
settings, see “Connectivity” on page 119.
Viewing the Memory Status
1. In any view, press [Options] and select “Memory
Status”.
Alarms
(M 3-2)
Setting the Alarms
The alarm function allows you to be alerted at a specified time.
Note that you need to set the current date and time before
setting the alarm function if it has not been done already.
Note
• The alarm will not sound when “Alarm Volume” is set to
“Silent”. When the profile is set to “Silent”, the “General
Volume” setting (p. 101) has priority.
→
“Organiser”
“Alarms”
1. Select the blank setting.
2. Enter the desired time.
3. Press [Save].
To Change the Type of Repeat Options
1. On the Set Alarm screen, select “Repeat”.
2. Select “Once Only”, “Every Day” or “Selected Days”.
“Once Only”:The alarm sounds once only.
“Every Day”:The alarm sounds every day at the
specified time.
“Selected Days”: The alarm sounds on the selected day of
the week at the specified time.
To Change the Type of Alarm Tone or Video Clip File
1. On the Set Alarm screen, select “Assign Tone/Video”.
2. Select “Assign Tone” and then select “Preset Sounds”
or “Sound Gallery”, or select “Assign Video”.
3. Select the desired tone or video clip file.
For details on selecting a tone, see “Assigning a Ringtone”
on page 102.
To Change the Snooze of the Alarm Tone
1. On the Set Alarm screen, select “Snooze”.
2. Select the desired snooze option.
Organiser91
To Change the Alarm Volume
1. On the Set Alarm screen, select “Alarm Volume”.
2. Press a (or d) to increase the volume or press b (or
c) to decrease the volume.
To Change the Vibration of Alarm Tone
1. On the Set Alarm screen, select “Vibration”.
2. Select “On”, “Link to Sound” or “Off”.
For details on selecting a vibration, see “Vibration” on
page 104.
To Change the Duration of the Alarm Tone
1. On the Set Alarm screen, select “Duration”.
2. Select the desired duration.
Resetting an Alarm Setting
“Organiser”
→
“Alarms”
1. Highlight the alarm you wish to reset.
2. Press [Options] and select “Reset Alarm”.
Resetting All Alarm Settings
“Organiser”
→
“Alarms” → “Clear All”
1. Press [Yes] or [No].
92Organiser
Calculator
The calculator function performs the 4 arithmetic calculations
using up to 12 digits.
“Organiser”
The calculator is displayed on the display.
Key operations for calculation are as follows:
(M 3-3)
→
“Calculator”
To enter a decimal point, press P.
To clear the entered number or function, press U.
To do the calculations, press .
To start a new calculation, press U.
Rate Conversion
You can also use the calculator as a currency calculator to
convert from/to a home currency using a conversion rate that
you enter.
To Set a Currency Conversion Rate
→
“Organiser”
Converter”
“Calculator” → [Options] → “Currency
→
“Exchange Rate”
1. Select “Domestic” or “Foreign”.
2. Enter the currency conversion rate.
To delete a digit, press U.
To Convert a Value
“Organiser”
→
“Calculator”
1. Enter the value to be converted.
2. Press [Options] and select “Currency Converter”.
3. Select “Convert to Domestic” or “Convert to Foreign”.
Voice Recorder
This allows you to record a voice clip, which can be used to
remind you of schedule entries or be sent within a multimedia
message. The recorded voice clip is saved in Sound Gallery.
Voice clips are saved in .amr format.
(M 3-4)
Recording a Voice Clip
→
“Organiser”
“Voice Recorder”
1. Press to start recording.
To stop recording before the recording time is over, press
.
2. Select “Save” to save the voice clip.
Note
• Press a (or V) or b (or W) to adjust the sound volume
when playing back the recorded file.
Sending Voice Clips
→
“Organiser”
“Voice Recorder”
1. Press to start recording.
2. Press to stop recording.
3. Select “Save and Send”.
For details on creating a message, see “Creating a New
Message” on page 59.
Organiser93
Selecting the Record Time
“Organiser”
“Record Time”
→
“Voice Recorder” → [Options] →
1. Select “For Message” or “Extended Voice”.
When selecting “Extended Voice”, you can save the voice
clip only in a memory card automatically.
Selecting the Storage Memory
→
“Organiser”
Recording to”
“Voice Recorder” → [Options] → “Save
1. Select the desired location.
When selecting “Choice”, you can select the location when
saving a voice clip.
Scanner
With the built-in digital camera, you can read texts and
barcodes in Jan format and QR codes, and create QR codes.
The scanned data can be saved as a Phonebook entry, URL,
Email address and text.
Note
• When scanning does not take place, it may be due to one of
Reading Barcodes
“Organiser”
94Organiser
(M 3-5)
the following reasons: type or size of barcode, scratches,
dirt, damage, print quality, light reflection, etc.
→
“Scanner” → “Scan Barcode”
1. Display the barcode using the external camera.
2. Press .
3. Press [Options] and select the desired option.
The options vary depending on the scanned data.
“Open Link”:The browser opens the URL.
“Copy URL”:The URL is copied.
“Save”:The URL is saved.
“Send Message”:The result is sent as SMS or MMS.
“Copy”:The result is copied.
To Use the Continuous Scanning
1. In scanning mode, press [Options] and select
“Continuous Scan”.
2. Select “On” or “Off”.
Opening a Barcode Picture
“Organiser”
→
“Scanner” → “Open Barcode”
1. Select the desired picture data for barcode.
Press to save.
Viewing the Scanned Data
→
“Organiser
“Scanner” → “Scanned Results”
1. Highlight the data you wish to view, then press .
2. Enter the desired text or select the desired data, then
press .
3. Press to save.
Creating QR Codes
“Organiser ”
→
“Scanner” → “Create QR Code”
1. Select the desired option.
“Text Input”:Create a QR code using the text you
“Gallery”:Create a QR code using the Gallery
enter.
data.
2. Enter the desired text or select the desired data, then
press .
3. Press to save.
Tip
• The QR code is saved in a PNG format file.
Scanning Text
→
“Organiser ”
“Scanner” → “Scan Text”
1. Display text using the camera.
2. When the bar under the scanned text is blue, press .
3. Press a or b to select the desired text, then press .
4. Press [Options] and select the desired option.
“OK”:The scanned result is in the text entry
“Select/Edit”:The scanned result can be modified.
screen.
“Change Mode”:The scanned result can be converted
To Use Reversed Text
to a web address, mail address,
phone number or to roman text.
1. In scanning mode, press [Options] and select “Reversed
Text”.
2. Select the desired option from “Auto”, “Normal” or
“Reversed”.
Stopwatch
You can store 4 lap times when using the stopwatch function.
“Organiser”
(M 3-6)
→
“Stopwatch”
1. Press to start.
Press [LAP] to view the lap time before the stopwatch
stops. Last 4 lap times are saved.
2. Press to stop.
Tip
• You can save a record of lap time and stop time in Text
Templates by pressing [Options] and selecting “Save to
Templates”.
Resetting Time
1. After stopping the stopwatch, press [Options] and select
“Reset”.
Organiser95
Tasks
(M 3-7)
You can register your schedule as task entries for a given date
or time.
Creating a New Entry
→
“Organiser”
“Tasks”
1. Select “Add New Entry”.
2. Enter the subject.
3. Enter the due date and then due time.
4. Select the reminder time.
When selecting “Other”, enter the desired reminder date
and time.
5. Press [Save].
Note
• If the date and time settings have not been entered, the date
and time entry screen is displayed (p. 108).
96Organiser
To Change the Type of Alarm Tone or Video Clip File
1. On the Reminder screen, select “Assign Tone/Video”.
2. Select “Assign Tone” and then select “Preset Sounds”
or “Sound Gallery”, or select “Assign Video”.
3. Select the desired tone or video clip file.
For details on selecting a tone, see “Assigning a Ringtone”
on page 102.
To Change the Duration of Alarm Tone or Video
1. On the Reminder screen, select “Duration”.
2. Select the desired duration.
To Change the Description
1. On the New Entry screen, select “Description”.
2. Enter a memo for the task entry.
To Make the Entry Completed or Uncompleted
“Organiser ”
→
“Tasks”
1. Highlight the desired entry.
2. Press .
3. On the view screen, press [Options] and select “Check”.
To make the entry uncompleted, select “Uncheck”.
To Make the Entry Secret
1. On the New Entry screen, select “Secret”.
2. Select “On” to make the data secret or select “Off” to
leave it as it is.
Sending a Task Entry
“Organiser”
→
“Tasks”
1. Highlight the task entry you wish to send.
2. Press [Options] and select “Send”.
3. Select “As Message”, “Via Bluetooth” or “Via Infrared”.
For “Via Bluetooth”
For details, see “Bluetooth” on page 119.
For “Via Infrared”
For details, see “Infrared” on page 121.
Note
• When pairing, you need to enter your passcode when
establishing contact with a Bluetooth wireless technology
enabled device for the first time.
Viewing the Memory Status
→
“Organiser”
“Tasks”
1. Press [Options] and select “Memory Status”.
Deleting Entries
“Organiser”
→
“Tasks” → [Options] → “Delete”
1. Select the desired option.
“This Task”:Deletes the selected entry.
“All Completed Tasks”: Deletes all checked entries.
“All Tasks”:Deletes all entries.
World Clock
Setting the Time Zone
“Organiser”
(M 3-8)
→
“World Clock”
1. Press [Edit].
2. Select “Set Time Zone”.
The current time zone is indicated on the world map.
3. Press c or d to change the time zone.
4. Press .
To Set the Custom Time Zone
“Organiser”
→
“World Clock”
1. Press [Edit].
2. Select “Set Time Zone”.
The current time zone is indicated on the world map.
3. Press [Options] and select “Set Custom Zone”.
4. Enter the desired city name and time.
Organiser97
Setting the Daylight Saving
“Organiser”
→
“World Clock”
1. Press [Edit].
2. Select “Daylight Saving”.
3. Select “On” or “Off”.
Countdown Timer
“Organiser” → “Countdown Timer”
(M 3-9)
1. Enter the time to count.
You can set the time from 1 second to 60 minutes.
2. Press to start counting.
3. Press to pause.
Press again to continue counting.
4. If the countdown has finished, press [Cancel] and then
press to start the countdown again.
Editing the Countdown Time
1. In the countdown start screen, press [Options] and
select “Edit”.
2. Modify the desired time.
98Organiser
Expenses Memo
You can record an expenses memo with predefined or edited
categories.
Recording in the Expenses Memo
“Organiser”
Expense”
(M 3-10)
→
“Expenses Memo” → “Add New
1. Enter the expenses using the digit keys.
2. Select the desired category.
Expenses memo is registered.
Viewing Totals
“Organiser”
Recorded expenses are displayed on the screen.
To Change Category
→
“Expenses Memo” → “Totals”
1. In the total view, select the desired item.
2. Press [Options] and select “Change Category”.
3. Enter a category name.
To Change Amount
1. In the total view, select the desired item.
2. Press [Options] and select “Change Amount”.
3. Enter the desired amount using the digit keys.
To Delete a Recorded Item
1. In the total view, select the desired item.
2. Press [Options] and select “Delete Item”.
The selected item is deleted from the list.
To Delete All Items
1. In the total view, select the desired item.
2. Press [Options] and select “Delete All”.
Editing the Category Name
“Organiser”
→
“Expenses Memo” → “Edit Category”
1. Select the desired category name.
2. Modify the name.
Phone Help
You can view the help list and use it to guide you in the phone’s
functions.
“Organiser”
(M 3-11)
→
“Phone Help”
1. Press a or b.
Organiser99
SIM Application
You can enjoy applications on the SIM/USIM card. Please
contact your service provider for further details.
100SIM Application
(M 10)
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.