Sharp SPC900 User Instructions

P178318GB010

C8318A (WWVB) PD09025M Size: 105 x 130 (mm)

RADIO CONTROLLED

WIRELESS THERMO CLOCK

USER’S INSTRUCTIONS

1

20

Thank you for your purchase of this delicate Wireless Thermo
clock. The utmost care has gone into the design and
manufacture of your clock. Please read these instructions
carefully and keep the manual well for future reference.

The receiver unit has a clear, easy-to-read display that
shows the time, month, date, day of the week, indoor
temperature as well as the outdoor temperature measured
and transmitted from the remote sensors. It is able to receive
and display readings from up to 2 remote sensors.

The 915 MHz technology means no wire installation is
required and you can place the sensors anywhere you like.

With radio controlled function, the current time and calendar
are automatically synchronized with the time signal
transmitted from USA (WWVB).

reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate ratio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications.

However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference
by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and
receiver

- Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV
technician for help.

2

19

MAIN FEATURES:
WEATHER STATION

1. CLOCK WINDOW:

- Displays time, year, signal strength indicator, daylight
savings time (DST), alarm icons and time zone map.

2. CALENDAR, DAY AND TEMPERATURE WINDOW:

- Displays the month, date, day of the week as well as the
indoor & outdoor temperature.

3. SNOOZE:

- Press it to stop the current alarm when it is sounding.

3

4 5 6 7

11109812

131415

TIME

ALM ON/OFF

UP DOWN

CHANNEL

MAX/MIN

RESET

SYNC C / F

1

2

gives you specific rights, and you may have other rights that
vary from state to state.

Printed in China SPC900

SHARP, registered in the U.S. Patent and Trademark Office

This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and
(2) This device must accept any interference received,
including interference that may cause undesired
operation.

Warning:

Changes or modifications to this unit not expressly approved
by the party responsible for compliance could void the user’s
authority to operate the equipment.

NOTE:

This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide

18 3

4. TIME key:

- In normal time mode, press it to enter alarm1 and
alarm2 time mode.

- Press and hold it for 2 seconds to enter the normal
time setting mode.

- In normal time setting mode, press it to step the setting
items.

5. UP key:

- In normal time mode, press it to switch between M-D
(Month-Date) and D-M (Date-Month) formats.

- In alarm time mode, press it to select the proper time
zone.

- In time setting mode, press it to increase the setting
values.

- Press and hold it for 3 seconds to receive the RC signal
for reception testing.

6. DOWN key:

- Press it to switch 12/24-hour format.

- In time setting mode, press it to decrease the setting
values.

7. MAX/MIN key:

- Press it to show the maximum and minimum
temperature records.

- Press and hold it for 3 seconds to delete the maximum
and minimum temperature records.

TWO YEAR LIMITED WARRANTY

M.Z. Berger & Company warrants the original consumer
purchaser of this product that it shall be free of defects in
materials and workmanship for two years from the purchase
date of this product. Defects caused by tampering, improper
use, unauthorized modifications or repairs, immersion in
water or abuse are not covered by this warranty. If a defect
covered by this warranty occurs during the warranty period,
wrap your clock carefully and send it to the following address:

M.Z. Berger Service Center

29-76 Northern Boulevard

Long Island City, NY

11101-2224

You must include a proof of purchase, either the original
receipt of a photocopy and a check or money order for
US$5.95 to cover the cost of handling. Also include your
return address inside the package. M.Z. Berger & Company
will repair or replace the clock and return it to you. M.Z. Berger
& Company will not be liable for any loss or damage,
including incidental or consequential damages of any kind;
from any breach of warranty either expressed or implied
relating to the product. Since some states do not allow the
exclusion or limitation of incidental or consequential
damages, this limitation may not apply to you. This warranty