Sharp SPC851 Instruction Manual

• Av oid p uttin g the clock in a highl y h umid
environment such as poolside or in a bathroom.
• Do not expose the clock to direct sunlight,
Instru ctions & Warranty extreme hot or cold temperatures.
Thank you for your purchase of this quality clock. The utmost care has gone into the design and manufacture of your clock. Please read these
instructions carefully and store them in a safe
Note: Attention! Please dispose of used unit and battery in an ecologically safe manner.
BATTERY WARNING
• Clean the battery contacts and also those of the
device prior to battery installation.
• Follow the polarity (+) and (-) to place battery.
• Do not mix old an d new batteries.
• Do not mix Alkaline, Standard (Carbon - Zinc), or
Rechargeable (Nickel - Cadmium) batteries.
• Incorrect battery placement will damage the clock
movement and battery may leak.
• Exhausted battery is to be removed from the product.
• Remove batteries from equipment which is not to
be used for an extended period of time.
• Do not dispose of batteries in fire. Batteries may
explode or leak.
F o r C u s t o m e r S er v i c e P l e a s e
Call 1-800-221-0131
and ask for'Cus tomer Service at x75 46.
: : y O ne Ye ar L i m ite d W a r r ant y
M.Z. Berger & Company warrants the original consumer
purchaser of this product that it shall be free of defects
in materials and workmanship for one year from the
purch ase da te of this product . Defe cts ca used by tam pe rin g, imp rop er u se, una ut hor ize d m odi fic ati ons
or repair s, immersion In w ater or abuse are not covered by this warranty. If a defect covered by this
warranty occurs during the warranty period, wrap your clock carefully and send it to the following address:
MZ Berger Service Center
2 9 - 7 6 N o r t h e m B o u l e v a r d
Long Island City. NY 11101
You must include a Rroof of Purchase, either the original
receipt or a photocopy and a check or money order for USD $6.00 to cover the cost of handling. Also include
your retum address Inside the package. M.Z. Berger will repair or replace the clock and return it to you.
M.Z. Berger will not be liable for any loss or damage, including Incidental or consequential damages of any
kind; from any breach of warranty either expressed or
implied relating to the product. Since some states do
n ot a ll ow t he e xc lus io n o r l im it at ion o f i nci de nt al o r
consequential damages, this limitation may not apply to you.
Printed in China Model SPC851
SHARP registered in the U.S. Patent and Trademark Office.^
I N S TA L LI N G O R R EPL A C I N G T HE B AT TERY
• Begin by opening the battery co mp ar tm en t
cover (A) on the back of the clock.
• Insert 1 "AA" battery (not included) into the
battery compartment and make sure the polarity is correct by following the (+ or -) symbols
engraved inside.
• Replace the battery compartment cover (A).
S E T T I N G T H E T I M E
• O n t he ba ck of the cl ock, tu m t he TI ME
SETTING KNOB (B) counter clockwise to the
correct time.
S E TT I N G T H E A L A R M
• O n the bac k o f th e clo ck , tu rn t he ALA RM
SETTING KNOB (0) counter clockwise to the
des i red a lar m t ime .
T O S W I TC H T HE A L A RM ON / O F F
• Push the ALARM ON/OFF SWITCH (D)
upward to turn on the alarm. Push the switch
down to shut off the alarm.
TO U SE T HE L IG HT
• Press the Switch (E) to light the clock dial
for nighttime viewing.
C A R E O F Y O UR CLO C K
• Replace the battery promptly when necessary
and store the clock without battery when
not in use.
• Be sure to use an Alkaline "AA" battery.
• Do not open the back case of the clock as you
may damage the clock movement.
• Clean your clock with a soft cloth or paper
t o w e l . D o n o t u s e c o r r o s i v e c l e a n e r s o r
che mi cal s olu ti ons o n t he c loc k.
Loading...