SHARP SP2366 Technical Report

COPIER : SF-2530

Date

:

May. 31, 1999

No. : SP-2366

ACTION CARRIED OUT AS A MEASURE TO
IMPROVE THE SOFTWARE.

1.Model Name: SF-2530/2540

2.General: A change has been carried out in the ROM software. This action has been carried out

as a measure to carry out the improvements described in the attached supplemental
document and to carry out a change in a portion of the specifications. Please refer to
the attached supplemental document for details concerning this action.

3.Action: The content described in <1>:

Japanese domestic production: From 1999 mid-February production.
Chinese (SOCC) production: From the 1st lot of 1999 March production.

The content described in <2>:

Japanese domestic production: From 1999 mid-March production.
Chinese (SOCC) production: From 1999 mid-April production.

SHARP CORPORATION Document Division I

1/3

Green

C

<1>

Content of the change in the ROM software version for model SF-2540.

The ROM software version has been changed from MAIN V 1.01 and language data
V 1.00 to MAIN V 1.02 and language data V 1.01.

Content of the change in the ROM software version for model SF-2530.

The ROM software version has been changed from MAIN V 1.05 to MAIN V 1.06.

Change Content SF-2540 SF-2530 Corresponding ROM

[1] Pin operations for the S56.

A change has been carried out so that during sort mode operations
carried out when the S56 is attached to the machine and
operations are carried out without changing the job status, the
machine will start up with the original pin settings.

[2] The addition of Sim 6-1 has been carried out.

The addition of Sim 6-1 has been carried out as a measure to
confirm the operation of the main SW relay.
The action described above has been carried out as a measure to
carry out the addition of a simulation window function in the
language ROM of model SF-2540.

[3] Auditor program display.

1) When the auditor program mode has been entered, the ‘‘- -’’
display is a flashing display, but when even one number is
input the display changes to an illuminated display.

2) The setting value display of the auditor mode settings for
auditor program P10 previously was a flashing display until a
number was input at which time the display changed to an
illuminated display. A change has been carried out and now
the display is changed to a regular flashing display.

[4] Manual register volume.

A change has been carried out in the default value of the manual
register volume. The default value of the manual register volume
has been changed from ‘‘40’’ to ‘‘45’’.

[5] Correction carried out of the non sort copy prohibit which was put in

effect after operations carried out in staple mode.

All copy operations were previously prohibited when there was
copy paper which had been stapled in the sorter delivery bin. A
change has been carried out and now copy operations which are
carried out in the non sort mode are allowed.

O O

O O

---- O

---- O

O ----

O O

MAIN

MAIN Language

ROM

MAIN

MAIN

MAIN

2/3

Model name ROM name Version ROM unit code Label content Checksum

SF-2540 MAIN ROM V1.02 VHI27C02089FC SF2540 MAIN V1.02 BC44 hex
SF-2540 Program ROM V1.01 VHI27C512H1FC SF2540 PRO V1.01 1E69 hex

SF-2540

SF-2540 Language ROM English V1.01 VHI27C512G9FC SF2540 ENG V1.01 D040 hex
SF-2540 Language ROM German V1.01 VHI27C512G7FC SF2540 GER V1.01 E3AA hex
SF-2540 Language ROM French V1.01 VHI27C512G8FC SF2540 FRN V1.01 1568 hex
SF-2540 Language ROM Spanish V1.01 VHI27C512G6FC SF2540 SPN V1.01 3A37 hex
SF-2530 MAIN ROM V1.06 VHI27C02090FC SF2530 MAIN V1.06 40BC hex

Language ROM

Japanese domestic

V1.01 VHI27C512G5FC SF2540 JPN V1.01 6357 hex