COPIER : SF-2025
Date
:
May. 21, 1999
No. : SP-2362
ESTABLISHMENT OF A CLEANING KIT CARRIED OUT AS A
MEASURE TO ALLEVIATE FUSING OFFSET PROBLEMS.
1.Model Name: SF-2025/2030/2040
2.General: The establishment of a cleaning roller kit has been carried out as a measure to alleviate
fusing offset problems, and is hereby reported. This action has been carried out in
compliance with a request from the market.
Cleaning roller kit (DKIT-0346FCZZ)
Contents of the cleaning roller kit
Part code Q’ty Part name
1 LFIX-0446FCZZ Existing 1 Upper CL retainer plate
2 XBPSD40P06KS0 Existing 1 M4 × 6 panhead screw (w/SW)
3 XRESP50-06000 Existing 1 E-ring 5
4 CGERH0564FC01 Existing 1 CL 24 T gear assembly
5 XNESD40-32000 Existing 2 M4 nut
6 XWSSD40-10000 Existing 1 M4 spring washer
7 NSFTZ2554FCZZ Newly established 1 CL 22T idle shaft N
8 LPLTM5353FCZZ Existing 1 Scraper attachment plate
9 PSHEZ4485FCZ1 Existing 1 Scraper
10 PBRSS0189FCZZ Existing 1 Discharge brush
11 XHBSE40P06000 Existing 2 M4 × 6 bind S-tight screw
SHARP CORPORATION Document Division I
1/3
Green
C
2/3
Ref.
Model
No.
SF-2025
SF-2030
SF-2040
<Interchange>
1. Interchangeable. 4. Not interchangeable.
2. Current type can be used in place of new type.
3. Current type cannot be used in place of new type.
Parts marked with ‘‘ ’’ is important for maintaining the safety of the set. Be sure to replace these parts with
specified ones for maintaining the safety and performance of the set.
Version P/G No.
name
---- ----
New type cannot be used in place of current type.
New type can be used in place of current type.
Current parts New parts
Parts code Parts code
DKIT-0346FCZZ ** Cleaning roller kit
NSFTZ2554FCZZ AK CL 22T idle shaft N
5. Interchangeable if replaced with same types of
related parts in use.
6. Others.
Price
rank
Parts name
Effec-
tive
time
---- 6
Inter-
change-
ability
Note
3/3
Loading...