SHARP SP2349 Technical Report

COPIER : SF-2025

Date

Feb. 25, 1999

MEASURE CARRIED OUT TO ESTABLISH OPERATION STABILITY IN THE PAPER DELIVERY UNIT.

1.Model Name: SF-1025/2022/2027/2035/2025/2030/2040

2.General: In accordance with the addition of a reversion prevention plate which was carried out to

No. : SP-2349

the front frame of the new models (SF-2530 and SF-2540) as a measure to establish operation stability in the paper delivery unit, the same addition was carried out in the models listed above.

LPLTM5650FCZ1 Reversion prevention plate

Detail of the assembled section

XHBSD40P06000 Screw, M4 x 6. S-tight

3.Action: * Japanese domestic production: From the 1st lot of 1998 December production.

Chinese (SOCC) production: From the 1st lot of 1999 January production.

SHARP CORPORATION Reprography Division

1/2

Green

Ref.

Model

No.

SF-1025 SF-2022 SF-2027

SF-2035 SF-2040

SF-2025 SF-2030

SF-1025 SF-2022 SF-2027

SF-2035 SF-2040

SF-2025 SF-2030

1. Interchangeable. 4. Not interchangeable.

2. Current type can be used in place of new type. New type cannot be used in place of current type.

3. Current type cannot be used in place of new type. New type can be used in place of current type.

Parts marked with ‘‘ ’’ is important for maintaining the safety of the set. Be sure to replace these parts with

specified ones for maintaining the safety and performance of the set.

name

Version P/G No.

All

Current parts New parts

Parts code Parts code

LPLTM5650FCZ1 AE

----

XHBSD40P06000 AA Screw (4 × 6)

5. Interchangeable if replaced with same types of related parts in use.

6. Others.

Price

rank

Parts name

Reversion prevention plate

Effec-

tive

time

* 6

Inter-

change-

ability

Note

2/2