Sharp SM3517 Datasheet
- 1 -
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books,
etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
SM3517
DESCRIPTION
The SM3517 is a CMOS 4-bit single-chip microcomputer for databank incorporating data memory
RAM, LCD driver, key/switch input circuit, 8-bit parallel I/O port, 2 output ports, external memory control circuit, and buzzer output circuit.
FEATURES
• ROM capacity :
Program ROM 8 k x 23 bits
Character ROM 5 x 9 x 128 bits
Constant ROM 208 x 4 bits
• RAM capacity :
Working RAM 256 x 4 bits
Display RAM 60 x 9 bits
Data RAM 2 k x 8 bits
• Memory expansion (external) : 32 k x 8 bits
• LCD display : 60 - segment x 9 -common
• I/O ports :
Parallel I/O 8 bits
Input 1 bit
Output 2 bits
Buzzer output 1 bit (4 kHz)
Key input 6 bits
• Standby release : 2 events (2 Hz signal, key input)
• Built-in oscillator :
• Instruction cycle time : 12 µs
• Operating temperature : –10 to +60°C
• Supply voltage : 2.5 to 3.4 V
• Package : 100-pin QFP (QFP100-P-1420)
[Test Sample only]
SM3517
4-Bit Single-Chip Microcomputer
(For Data Bank Use)
System clock (built-in CR oscillator) 250 kHz
Timer (built-in CR oscillator) 32.8 kHz
(external crystal)
32.768 kHz
SM3517
- 2 -
Key matrix
Expand
memory
32 k-byte
S1-S6
S7-S21
S53-S60
(MAX. 84-key)
S1-S60
CE
KI
2-KI7
DIO1-DIO8
RW
CE
KI
1 XCR VCC TEST RESET XI XO BZ
H
1-H9
VB
VM
VA
EO1
EO2
VCC
Buzzer
VCC
SM3517
ON
Key
RESET
Key
3V
Common signal
Segment signal
Individual output
+
–
SYSTEM COMFIGURATION EXAMPLE
Loading...