Sharp SM3515 Datasheet
- 1 -
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books,
etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
DESCRIPTION
The SM3515 is a CMOS 4-bit single-chip microcomputer for databank incorporating data memory
RAM, LCD driver, key input circuits and buzzer output circuit. By connecting an external crystal, a 1 Hz
timer interrupt is made possible for easier clock
function.
FEATURES
• ROM capacity :
Program ROM 12 k x 23 bits
Character ROM 5 x 8 x 128 bits
• RAM capacity :
Working RAM 256 x 4 bits
Display RAM 60 x 8 bits
Data RAM 512 x 8 bits
• LCD display : 60 - segment x 8 -common
• I/O ports :
Buzzer output 1 bit (4 kHz)
Key input 7 bits
• Standby release : 2 events (2 Hz signal, key input)
• Built-in oscillator :
• Instruction cycle time : 10 µs
• Operating temperature : –10 to +60°C
• Supply voltage : 2.5 to 3.4 V
• Package : 100-pin QFP (QFP100-P-1420)
SM3515
SM3515
4-Bit Single-Chip Microcomputer
(For Data Bank Use)
System clock (built-in CR oscillator) 300 kHz
Timer (built-in CR oscillator) 32.8 kHz
(external crystal)
32.768 kHz
- 2 -
SM3515
SYSTEM COMFIGURATION EXAMPLE
Key matrix
S1-S6
S53-S60
(MAX. 84-Key)
S1-S60
KI2-KI7
XCR
ON
Key
RESET
Key
KI1 VCC TEST RESET XI XO BZ
H
1-H8
VCC
3V
Buzzer
VCC
SM3515
Common signal
Segment signal
+
–
Loading...