Thank you very much for buying this SHARP product.
Before using your SHARP refrigerator, please read
this operation manual to ensure that you gain the
maximum benefit from your new refrigerator.
1. This refrigerator is airtight. TO PREVENT FATAL ACCI-
DENTS TO CHILDREN, please completely remove the door
prior to discarding the refrigerator.
2. Highly volatile and inflammable materials such as ether,
petrol, propane gas, adhesive agents and pure alcohol etc.
are liable to explode. Do not store these materials in the
refrigerator.
3. To prevent damage to the outer cabinet, avoid contact with
lacquer, and paint, etc.
4. When cleaning your refrigerator, do not splash water directly on the outer cabinet or the interior. This may lead to
rusting and deterioration of the electrical insulation.
5. If any areas adjacent to electrical components have to be
cleaned, unplug the refrigerator first to prevent electric
shock, then wipe the area with a dry cloth.
6. Should electrical components be accidentally immersed in
water, unplug the refrigerator, dry the parts and contact your
nearest service agent approved by SHARP.
CAUTION
1. Do not touch the compressor unit, as it can become ex-
tremely hot during operation.
2. If the power supply is accidentally disconnected, please
wait for at least 5 minutes before connecting back the power,
as back pressure in the compressor may trip the overload
relay.
3. Avoid removing food from the freezer with your bare hands.
Directly touching products stored at sub-zero temperatures
can result in frostbite.
4. To prevent accidental power stoppage, plug the refrigerator directly to the source. Do not use a double adaptor as
loss of power could lead to the spoiling of the stored food.
5. Do not place bottles in the freezer as they may crack when
frozen.
6. Keep the door securely closed. If the door is left ajar, the
controlled inner temperature will rise, resulting in food spoilage and increase in electricity costs.
7.
Do not install this refrigerator in damp or wet location as
the insulator will be faulty to cause leak. Furthermore,
condensation may build up on the outside of the refrigerator.
8. When installing or moving the refrigerator, make sure that
you do not nip or kink the power cord. Damage of the power
cord may cause electric shock or fire.
9. Do not use this refrigerator when the power cord or plug is
damaged, or the outlet attachment is loose, as they may
cause electric shock or ignition.
7. This refrigerator is designed solely for the purpose of stor-
ing foodstuff for domestic use in accordance with the instructions given in this manual. Using the refrigerator for
other purposes might be harmful to persons or property.
8. This refrigerator is not suitable for the storage of materials requiring precise temperatures. Deterioration of these
materials will be dangerous.
9. Dust deposited on the power plug may cause fire. Wipe it
off carefully.
10. When replacing the lamp bulb, unplug the refrigerator first
to prevent electric shock.
11. Do not remodel this refrigerator. Also other than repair
technicians, do not disassemble or repair it, which can
result in fire, electric shock, or injury.
12. Information regarding disposal of the appliance
Flammable insulation blowing gases should be disposed
appropriately. Take the cabinet and doors to a recycling
plant for flammable insulation blowing gases.
10. When removing the power plug, grasp, not the cord, but
the plug. Pulling the cord may cause electric shock or ignition.
11. Make sure that you leave adequate ventilation space
around the refrigerator to prevent the compressor from overheating and stopping. Please follow the instructions given
for installation.
12. The refrigeration system behind and inside the refrigerator
contains refrigerant. If this system is punctured it could result in serious damage to your refrigerator, therefore do
not allow any sharp objects to come into contact with the
refrigeration system.
13. Should the flexible supply cord be damaged, it must be
replaced by service agent approved by SHARP as the special cord is required.
14. In case of gas leak, ventilate the area by opening a window, etc. Do not touch the refrigerator or the power outlet.
15. Do not place heavy or easily broken objects on top of the
refrigerator. Objects may fall when opening or closing the
refrigerator, causing bodily injury.
16. Do not place objects containing liquid on top of the refrigerator. Spillage may cause electric shock or fire.
17.
Do not drop objects inside the refrigerator or strike the
inner wall. This may cause the inner surface to crack.
18. This refrigerator is not intended for use by young children
or infirm persons without supervision. Young children should
be supervised to ensure that they do not play with the refrigerator.
INSTALLATION
1.To ensure adequate ventilation for your refrigerator, it is
recommended to provide space of 6cm on both sides and
at the back, and space of 9cm above the refrigerator.
2.Using the front Adjustable foot, ensure that the refrigerator is positioned firmly and level on the floor.
3.In order to prevent possible electric shock, install the
grounding wire to the earth wire connecting screw at the
rear of the refrigerator. (2 pin plug region)
NOTE:
• Keep your refrigerator out of direct sunlight.
• Do not place next to heat generating appliance.
• Do not place directly on the ground. Provide suitable stand.
2
6cm
6cm
9cm
107.3cm
6cm
96.5cm
Adjustable
foot
OPERATION
CONTROLLING TEMPERATURES
The refrigerator controls its temperature automatically. However, if needed,
adjust the temperature as follows.
Freezer compartment
FREEZER TEMP.
CONTROL regulates
the quantity of cold
air to the freezer.
FREEZER TEMP. CONTROL
MEDMIN
(WINTER SEASON)
4123567
Coldest
•7 (MAX) setting directs more cold air to the freezer compartment. (making the freezer compartment colder)
•1 (MIN) setting directs less cold air to the freezer compartment. (making
the freezer compartment less colder)
• If the freezer does not cool even when setting FREEZER TEMP. CONTROL to 7(MAX), set REFRIGERATOR TEMP. CONTROL to 5 (Coldest)
as well.
Refrigerator compartment
REFRIGERATOR
TEMP. CONTROL
controls the compressor running time
of the refrigeration
system.
•5 (Coldest) setting will result in colder temperature in the both (refrigerator and freezer) compartments.
•1 (MIN) setting will result in warmer temperature in the both (refrigerator
and freezer) compartments.
• If the refrigerator is operated for a long time with REFRIGERATOR TEMP.
CONTROL set at 5 (Coldest), foods stored in the refrigerator compartment may also freeze.
• Low ambient temperature may cause placed foods to freeze even if REFRIGERATOR TEMP. CONTROL is set to 1 (MIN).
• The freezer compartment may not cool sufficiently when leaving REFRIGERATOR TEMP. CONTROL as 1 (MIN) for an extensive period. To cool
the freezer compartment properly, set REFRIGERATOR TEMP. CONTROL closer to 5 (Coldest).
MED
3
2
1
MIN
REFRIGERATOR
TEMP. CONTROL
4
CHILLED
ZONE
5Coldest
7(MAX)
For making ice rapidly or
fast freezing.
4(MED)
MAX
For normal freezing.
1(MIN)
When frozen food or ice
cream is not stored.
5(Coldest)
For keeping foods fresher
tasting.
When the refrigerator does
not provide sufficient cooling.
3(MED)
For normal operation.
1(MIN)
When the refrigerator provides excessive cooling.
NOTE:
• For hot summer conditions (about over
35°C ambient temperature), set your
FREEZER TEMP. CONTROL to less
colder than 4(MED) towards 1(MIN). This
is because 7(MAX) setting may result in
too little air flow to the refrigerator compartment, causing too warm temperature
in the refrigerator compartment. And set
your REFRIGERATOR TEMP. CONTROL
to colder than 3(MED).
Coldest
MAX
Coldest
MAX
MIN Coldest
MED
3
4
2
MED
CHILLED
5Coldest
3
4
CHILLED
5Coldest
1
MIN
REFRIGERATOR
TEMP. CONTROL
MIN Coldest
2
1
MIN
REFRIGERATOR
TEMP. CONTROL
ZONE
ZONE
FREEZER TEMP. CONTROL
MEDMIN
(WINTER SEASON)
4123567
MED MAX
• In a cold kitchen (about under 10°C ambient temperature), set your FREEZER
TEMP. CONTROL to 7(MAX) to avoid too
warm temperature in the freezer compartment. This is because the compressor operation is too short in winter, and not
enough cold air is provided to the freezer
compartment. And if the foods in the refrigerator compartment freeze, you must
set REFRIGERATOR TEMP. CONTROL
to less colder setting towards 1(MIN).
FREEZER TEMP. CONTROL
MEDMIN
(WINTER SEASON)
4123567
MED MAX
•With FREEZER TEMP. CONTROL set to
7(MAX), there will be less cold air directed
to the refrigerator compartment, and the
refrigerator compartment may not become
cold enough.
COOLING CAPSULE [option]
• If is possible to cool juices so that they become slush. Juice may not freeze depending on the
condition of use.
•2 cans that are 121mm in height and 68mm in diameter (equivalent to 350ml cans) may be
placed.
NOTE:
• There is no rapid freeze function. The cooling speed is the same as the refrigerator compartment.
• Do not place ice cream, or it will melt.
• Do not place bottles, or they may break.
• Always completely close the cooling capsule lid.
Lever
HINTS WHEN MAKING ICE
1.Do not over fill Ice cube trays; otherwise the ice cubes will be joined together when frozen.
2.When the ice cubes are made, turn the lever clockwise to empty the ice into Ice cube box.
NOTE:
Do not make ice with Ice cube box or pour oil into it. Ice cube box may crack.
Ice cube box
DEFROSTING
Defrosting is fully automatic due to a unique energy saving system. Whereby the defrost cycle start time is proportional to
the running time of your refrigerator compressor, i. e., the less time the refrigerator compressor operates (during the winter
season or you’re away on holidays), the longer the time between each defrost cycle.
DEODORIZING UNIT (only for SJ-D25P, SJ-D21P)
A built-in unit which requires no manual operation because it automatically starts operating when the refrigerator is powered on.
3
STORING FOOD
Refrigeration reduces the rate of food spoilage. To
maximize the shelf life of perishable food products,
ensure that the food is of the freshest possible quality. The following is a general guide to help promote
longer food storage.
Fruit / Vegetables
To minimize moisture loss, fruit and vegetables should
be loosely enclosed in a plastic material e.g. wrap,
bags ( do not seal ) and place in Fruit and vegetable
crisper. Those fruits and vegetables with thick skins
e.g. oranges do not require wrapping.
Dairy Products & Eggs
• Most dairy products have a used by date on the outer
packaging which informs the recommended temperature and shelf life of the product.
• Eggs should be stored on Egg pocket.
Meats / Fish / Poultry
• Place on a plate or dish and cover with paper or
plastic wrap.
• For larger cuts of meat, fish, or poultry, place to the
rear of the shelves.
• Ensure all cooked food is wrapped securely or
placed in an airtight container.
CARE AND CLEANING
NOTE:
• Evenly place the food on the shelves to allow the cooling air to
circulate efficiently.
• Hot foods should be cooled before storing. Storing hot foods
increases the temperature in the unit and increases the risk of
food spoilage.
• Do not block the outlet and inlet of the cool air circulating circuit
with foods or containers; otherwise the foods will not be evenly
cooled throughout the refrigerator.
Do not place food directly in front of cold air
outlet. This may lead to
the food freezing.
IN
OUT
FOR BEST FREEZING
• Quality of foods should be fresh.
• Freeze small quantities of food at a time to freeze them quickly.
• Food should be properly stored or covered and the air should
be removed to seal tightly.
• Evenly place the food in the freezer.
• Label bags or containers to keep an inventory of freezing food.
Some household cleaning chemicals may affect the inside surfaces and plastic shelves resulting in splitting or cracks occurring.
When cleaning all plastic
parts inside this refrigerator,
only use diluted dishwashing
liquid(soapy water). Make
sure that all plastic parts are
thoroughly rinsed with water
after cleaning.
1.Remove the shelves and pockets from the cabinet
and door. Wash them in warm soapy dishwashing
water; rinse in clean water and dry.
2.Clean the inside with a cloth soaked in warm soapy
dishwashing water. Then, use cold water to wipe
off soapy water.
3.Wipe the exterior with a soft cloth each time it is
soiled.
4.Clean Magnetic door seal with a toothbrush and
warm soapy dishwashing water.
5.Whenever the refrigerator is moved to clean or repositioned, Evaporating pan should be removed and
cleaned.
Evaporating pan;
How to remove
Move Evaporating pan to the left
and to pull it toward yourself.
How to set
Set Evaporating pan so that the
two protrusions on the machine
come through its corresponding
holes, and move the pan to the
right.
NOTE
Please pay attention to the safety
since the compressor is very high.
Make sure the back end of Evaporating pan rests securely on the
rail. Otherwise water will leak.
Evaporating
pan
Rail
Evaporating
pan
Compressor
Protrusion
Hole
Protrusion
Hole
Evaporating pan
NOTE:
• Do not use polishing powder, benzine, hot water etc.
• If undiluted detergent is used or soapy water is not wiped off
thoroughly, cracking of plastic parts can result.
•Wipe any food oils adhered to plastic components as they can
cause cracking of the plastic surface.
Switching off your refrigerator
If you switch your refrigerator off when you are going away for
an extended period, remove all food, clean the interior thoroughly.
Remove the power cord plug from the power socket and leave
all doors open.
WHAT TO DO BEFORE YOU CALL FOR SERVICE
Before you call for service, check the following point .
IT IS NORMAL for the refrigerator to produce the
following sounds.
• Loud noise produced by the compressor when operation starts --- Sound becomes quieter after a
while.
• Loud noise produced once a day by the compressor --- Operating sound produced immediately after
automatic defrost operation.
• Sound of flowing fluid (gurgling sound, fizzing sound)
--- Sound of refrigerant flowing in pipes (sound may
4
become louder from time to time).
• Cracking or crunching sound --- Sound produced by expansion
and contraction of inner walls and internal parts during cooling.
• Squeaking sound --- Sound produced by expansion and contraction of internal parts.
IT IS NORMAL that the outside of a cabinet may be hot when
touched. The hot pipe is in the cabinet in order to prevent dew
generation.
IF YOU STILL REQUIRE SERVICE
Refer to your nearest service agent approved by SHARP.
Replace the lamp bulb with same type.
Refrigerator: base E12, MAX 10W
Make sure that the rated voltage and wattage of the lamp bulb are correct when replacing (check the label near the bulb).
9. Refrigerator shelf (Small)
10. Refrigerator shelf (Large)
11. Three position adjustable shelf
This shelf has three positions,
it can be partly or fully extended
or be fully folded away simply
by pushing the shelf back then
lifting it up.
12. Evaporating pan (rear side)
13. Shelf
14. Fruit and vegetable crisper
15. Adjustable foot
16. Top table
Do not place hot objects on Table top. The table may melt
and deform. The table can resist temperatures up to 100°C.