2
WARNING
1. This refrigerator is airtight. TO PREVENT
FATAL ACCIDENTS TO CHILDREN,
please completely remove the door prior
to discarding the refrigerator.
2. Highly volatile and inflammable materials
such as ether, petrol, propane gas, adhesive agents and pure alcohol etc. are liable to explode. Do not store these materials in the refrigerator.
3. To prevent damage to the outer cabinet,
avoid contact with lacquer, and paint, etc.
4. When cleaning your refrigerator, do not
splash water directly on the outer cabinet
or the interior. This may lead to rusting and
deterioration of the electrical insulation.
5. When cleaning any areas adjacent to elec-
trical components or replacing the lamp bulb,
unplug the refrigerator first to prevent electric shock.
6. Should electrical components be accidentally immersed in water, unplug the refrigerator, dry the parts and contact your nearest service agent approved by SHARP.
7. When disconnecting the power plug, do not
touch the pins of plug. This may cause electric shock.
8 This refrigerator is designed solely for the
purpose of storing foodstuff for domestic
use in accordance with the instructions
given in this manual. Using the refrigerator for other purposes might be harmful to
persons or property.
9. This refrigerator is not suitable for the storage of materials requiring precise temperatures. Deterioration of these materials will
be dangerous.
10. Dust deposited on the power plug may
cause fire. Wipe it off carefully.
11. Do not attempt to change or modify this
refrigerator. This may result in fire, electric
shock or injury.
12. Information regarding disposal of the
appliance
Flammable insulation blowing gases
should be disposed appropriately. Take the
cabinet and doors to a recycling plant for
flammable insulation blowing gases.
1. Do not touch the compressor unit or its
peripheral parts, as they become extremely hot during operation and the metal
edges may cause injury.
2. If the power supply is accidentally disconnected, please wait for at least 5 minutes
before re-connecting the power, as back
pressure in the compressor may trip the
overload relay.
3. Avoid removing food from the freezer with
your bare hands. Directly touching products stored at sub-zero temperatures can
result in frostbite.
4. To prevent accidental power disconnection, plug the refrigerator directly to the
source. Do not use a double adaptor as
loss of power could lead to the spoiling of
the stored food.
5. Do not place bottles in the freezer as they
may crack when frozen.
6. Keep the door securely closed. If the door
is left ajar, the controlled inner temperature will rise, resulting in food spoilage and
increase in electricity costs.
7. Do not install the refrigerator in a damp or
wet location as this may cause damage
to the insulation and a leak. Condensation may also build on the outer cabinet
and cause rust.
8. When installing or moving the refrigerator, make sure that you do not nip or kink
the power cord. Damage of the power cord
may cause electric shock or fire.
9. Do not use this refrigerator when the
power cord or plug is damaged, or the
outlet attachment is loose, as they may
cause electric shock or fire.
10. Disconnect from the mains electricity supply by removing the mains plug from the
electricity supply socket. Do not remove
by pulling the mains lead. This may cause
electric shock or fire.
11. Make sure that you leave adequate ventilation space around the refrigerator to prevent the compressor from overheating and
stopping. Please follow the instructions
given for installation.
CAUTION
CARE AND CLEANING
1.Remove the shelves and pockets from the cabinet and door. Wash them in warm soapy dishwashing
2.Clean the inside with a cloth soaked in warm soapy dishwashing water. Then, use cold water to
3.Wipe the exterior with a soft cloth each time it is soiled.
4.Clean Magnetic door seal with a toothbrush and warm soapy dishwashing water.
5.Whenever the refrigerator is moved to clean or repositioned, the Evaporating pan should be
NOTE
• Do not use polishing powder, benzine, hot water etc.
• If undiluted detergent is used or soapy water is not wiped off thoroughly, cracking of plastic parts
• Wipe any food oils adhered to plastic components as they can cause cracking of the plastic sur-
Evaporating pan
How to remove
Move the Evaporating pan to pull
it toward yourself.
Replacing method of the lamp bulb
1.Unplug the refrigerator first to prevent electric shock.
2.Remove the Light cover.
If you switch your refrigerator off when you are going away for an extended period, remove all food,
clean the interior thoroughly. Remove the power cord plug from the power socket and leave all
doors open.
3.Replace the lamp bulb with same type.
Base E14,MAX 10W, T-20
Switching off your refrigerator
13. The key should be kept out of the reach of
the children, and not in the vicinity of the appliance, in order to prevent the children from
being locked inside.