Sharp SJ-D20T, SJ-D23T Operating Manual

SJ-D20T SJ-D23T
REFRIGERATOR
OPERATION MANUAL

CONTENTS

SJ-D23T
• WARNING ...........................................2
• CAUTION............................................2
• INSTALLATION ..................................3
• DESCRIPTION ................................... 4
• STORING FOOD ................................6
• CARE AND CLEANING .....................7
• WHAT TO DO BEFORE YOU CALL
FOR SERVICE ....................................8
Thank you very much for buying this SHARP product. Before using your SHARP refrigerator, please read this operation manual to ensure that you gain the maximum benefit from it.
SJ-D20T
1

WARNING

CAUTION

1. This refrigerator is airtight. TO PREVENT FATAL ACCIDENTS TO CHILDREN, please completely remove the door prior to discarding the refrigerator.
2. Highly volatile and inflammable materials such as ether, petrol, propane gas, adhe­sive agents and pure alcohol etc. are li­able to explode. Do not store these mate­rials in the refrigerator.
3. To prevent damage to the outer cabinet, avoid contact with lacquer, and paint, etc.
4. When cleaning your refrigerator, do not splash water directly on the outer cabinet or the interior. This may lead to rusting and deterioration of the electrical insulation.
5. When cleaning any areas adjacent to elec-
trical components or replacing the lamp bulb, unplug the refrigerator first to prevent elec­tric shock.
6. Should electrical components be acciden­tally immersed in water, unplug the refrig­erator, dry the parts and contact your near­est service agent approved by SHARP.
7. When disconnecting the power plug, do not
touch the pins of plug. This may cause elec­tric shock.
8 This refrigerator is designed solely for the
purpose of storing foodstuff for domestic use in accordance with the instructions given in this manual. Using the refrigera­tor for other purposes might be harmful to persons or property.
9. This refrigerator is not suitable for the stor­age of materials requiring precise tempera­tures. Deterioration of these materials will be dangerous.
10. Dust deposited on the power plug may cause fire. Wipe it off carefully.
11. Do not attempt to change or modify this refrigerator. This may result in fire, electric shock or injury.
12. Information regarding disposal of the appliance
Flammable insulation blowing gases should be disposed appropriately. Take the cabinet and doors to a recycling plant for flammable insulation blowing gases.
1. Do not touch the compressor unit or its
peripheral parts, as they become ex­tremely hot during operation and the metal edges may cause injury.
2. If the power supply is accidentally discon­nected, please wait for at least 5 minutes before re-connecting the power, as back pressure in the compressor may trip the overload relay.
3. Avoid removing food from the freezer with your bare hands. Directly touching prod­ucts stored at sub-zero temperatures can result in frostbite.
4. To prevent accidental power disconnec­tion, plug the refrigerator directly to the source. Do not use a double adaptor as loss of power could lead to the spoiling of the stored food.
5. Do not place bottles in the freezer as they may crack when frozen.
6. Keep the door securely closed. If the door is left ajar, the controlled inner tempera­ture will rise, resulting in food spoilage and increase in electricity costs.
7. Do not install the refrigerator in a damp or wet location as this may cause damage to the insulation and a leak. Condensa­tion may also build on the outer cabinet and cause rust.
8. When installing or moving the refrigera­tor, make sure that you do not nip or kink the power cord. Damage of the power cord may cause electric shock or fire.
9. Do not use this refrigerator when the power cord or plug is damaged, or the outlet attachment is loose, as they may cause electric shock or fire.
10. Disconnect from the mains electricity sup­ply by removing the mains plug from the electricity supply socket. Do not remove by pulling the mains lead. This may cause electric shock or fire.
11. Make sure that you leave adequate venti­lation space around the refrigerator to pre­vent the compressor from overheating and stopping. Please follow the instructions given for installation.
2

INSTALLATION

12. The refrigeration system behind and in-
side the refrigerator contains refrigerant. If this system is punctured it could result in serious damage to your refrigerator, therefore do not allow any sharp objects to come into contact with the refrigeration system.
13. Should the flexible supply cord be dam­aged, it must be replaced by service agent approved by SHARP as a special cord is required.
14. In case of gas leak, ventilate the area by opening a window, etc. Do not touch the refrigerator or the power outlet.
15. Do not place heavy or easily broken ob­jects on top of the refrigerator. Objects may fall when opening or closing the re­frigerator, causing injury.
16. Do not place objects containing liquid on top of the refrigerator. Spillage may cause electric shock or fire.
17. Do not drop objects inside the refrigera­tor or strike the inner wall. This may cause the inner surface to crack.
18. This refrigerator is not intended for use by young children or infirm persons with­out supervision. Young children should be supervised to ensure that they do not play with the refrigerator.
1. To ensure adequate ventilation for your refrigerator, it is recommended to provide space of 6cm on both sides and at the back, and space of 30cm above the re­frigerator. Insufficient spacing will decrease the cooling efficiency, resulting in unnec­essary consumption of electricity.
6cm
30cm
2cm
110 cm
6cm
102cm
6cm
2.Using the front Adjustable foot, ensure that the refrigerator is positioned firmly and level on the floor.
NOTE
Position your refrigerator so that the plug is acces­sible.
Keep your refrigerator out of direct sunlight.
Do not place next to heat generating appli-
ance.
Do not place directly on the ground. Provide suitable stand.
Adjustable foot
3
Loading...
+ 5 hidden pages