Sharp S7000UK Owner's Manual

S7000UK

OWNER’S GUIDE

IMPORTANT SAFETY INSTRUCTIONS

For Household Use Only

WHEN USING YOUR SHARK® STEAM MOP,
BASIC SAFETY PRECAUTIONS SHOULD
ALWAYS BE FOLLOWED, INCLUDING THE
FOLLOWING:

READ ALL INSTRUCTIONS BEFORE USING
YOUR SHARK

®

MULTI-FUNCTION STEAM MOP

LITE.

DANGER OF SCALDING.

Please use caution when using the steam mop. The
steam emitted from the steam mop is very hot.

IM P O R TANT:

This appliance is not intended for use by persons
with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge,
unless they have been given supervision or
instruction concerning use of the appliance by a
person responsible for their safety.

Children shall not use or play with this
appliance. Close supervision is necessary
to keep appliance out of reach of children
during use and cooling.

WARNING:

TO REDUCE THE RISK OF FIRE, ELECTRIC
SHOCK OR INJURY:

1. Use the system only for its intended use.

2. DO NOT use outdoors.

3. DO NOT leave the appliance unattended when

plugged in. Always unplug the power cord
from the electrical outlet when not in use and
beforeservicing.

4. DO NOT allow the appliance to be used by

children. Close attention is necessary when used
near children, pets or plants.

5. Use only as described in this manual.
6 . Use only manufacturer’s recommended

accessories.

7. DO NOT use with damaged cord or plug.

8. DO NOT USE if the appliance is not working, has

been dropped, dropped into water, damaged or
left outdoors.

9. NO SERVICEABLE PARTS. Incorrect re-

assembly or repair can cause a risk of electrical
shock or injury to persons when the appliance is
used. Contact Customer Service.

10. To protect against a risk of electric shock, DO
NOT immerse the steam mop into water or any

other liquids.

11. DO NOT handle plug or steam mop with wet
hands or operate appliance without shoes.

12. DO NOT pull or carry by power cord, use power
cord as handle, close a door on the power
cord, or pull the power cord around sharp
edges or corners. Keep power cord away from
heatedsurfaces.

13. DO NOT unplug by pulling on power cord. To
unplug, grasp the plug not the power cord. Do not
use extension cords or outlets with inadequate
current carrying capacity.

14. DO NOT put any objects into openings. Do not use

with any opening that is blocked.

15. DO NOT put hands or feet under the steam mop.

Unit gets very hot.

16. Use ONLY on flat, horizontal surfaces. Do not use

on walls, counters or windows.

17. DO NOT use on leather, wax polished furniture or

floors, synthetic fabrics, velvet or other delicate,
steam sensitive materials.

18. Liquid or steam must not be directed towards

equipment containing electrical components, such
as the interior of ovens.

19. DO NOT add cleaning solutions, scented

perfumes, oils or any other chemicals to the water
used in this appliance as this may damage the
unit or make it unsafe for use. If you live in a hard
water area, we recommend using distilled water in
your steam mop.

20. When in use, NEVER turn the appliance over or
on its side. NEVER DIRECT STEAM TOWARDS

PEOPLE, ANIMALS OR PLANTS.

21. NEVER LEAVE THE STEAM MOP IN ONE SPOT
ON ANY SURFACE FOR ANY PERIOD OF TIME
WHEN THE CLEANING PAD IS ATTACHED AS
THIS WILL DAMAGE YOUR FLOORS.

22. Carefully remove the cleaning pad immediately

after you have unplugged and allowed the steam
mop to cool.

23. When cleaning the steam mop, unplug the power
cord from the electrical outlet and clean with a dry
or damp cloth. Do not pour water or use alcohol,
benzene or paint thinner on the unit.

24. Extreme caution should be exercised when using
this appliance to clean stairs.

25. Never use steam mop functions without the
cleaning pads attached.

26. Keep your work area well lit.

27. Store steam mop indoors in a cool, dry place.

28. To avoid circuit overload, do not operate another

appliance on the same socket (circuit) as the
steam cleaner.

29. If an extension cord is absolutely necessary, an

extension cord rated a minimum of 15 ampere,

2

2.08mm

(14 AWG) cord should be used. Cords
rated for less amperage may overheat. Care
should be taken to arrange cord so that it cannot
be pulled or tripped over.

30. DO NOT leave unattended when the system is

connected to a power supply or electrical outlet.
Turn off all controls before unplugging the unit.

31. DO NOT store unit with damp or wet cleaning

pad attached. Never leave the steam mop in one
spot on any surface for any period of time with
a damp or wet cleaning pad attached as this will
damage your floors.

32. Always unplug and allow the steam mop to cool

before removing the mop head or accessory nozzle.

33. Make sure that the water tank cap is secured

tightly when using the appliance.

WARNING: Your steam mop is designed

to clean hard floor surfaces that will withstand high
heat. Do not use on unsealed wood or unglazed
ceramic floors. On surfaces that have been treated
with wax or some no wax floors, the sheen may
be removed by the heat and steam action. It is
always recommended to test an isolated area of
the surface to be cleaned before proceeding. We
also recommend that you check the use and care
instructions from the floor manufacturer.

SAVE THESE

INSTRUCTIONS

1 2080 0 862 0 453 www.sharkclean.eu

Contents

This appliance complies with the WEEE-Directive 2002/96/EC on the disposal of electrical and electronic
equipment (WEEE).

This appliance complies with the European directives for electromagnetic compatibility (EMC) 2004/108/EC and its
revisions, as well as Low Voltage Directive (LVD) 2006/95/EC and its revisions.

This marking indicates that this product should not be disposed with other household wastes
throughout the EU. To prevent possible harm to the environment or human health from uncontrolled
waste disposal, recycle it responsibly to promote the sustainable reuse of material sources. To return
your used device, please use the return and collection systems or contact the retailer where this
product was purchased. They can take this product for environmental safe recycling.

Although the product is not provided with standby mode or off mode, it still fulfills the requirements of 1275/2008/
EC - the directive for Eco-Design requirements since according to technical justification, it is considered as
inappropriate to provide standby and off modes when connecting to mains. To reduce energy consumption be sure
to unplug the unit af ter use.

Guarantee: This product is unconditionally guaranteed for one year against all defects of workmanship and
materials. This guarantee does not affect your statutory rights. If this product proves unsatisfactory please contact
our customer service department on freephone 0800 862 0453 or by e-mail [e-mail].

Thank you for
purchasing the Shark®
Multi-Function Steam
Mop Lite.

Getting Started ....................................................................................... 5

Assembling Your Steam Mop ................................................................... 6

Using Your Steam Mop ............................................................................ 7

Using Your Carpet Glider .......................................................................... 8

Using Your Handheld Steamer .................................................................. 9

Using Your Removable Handheld Steamer with Different Accessories .......... 10

Care of Your Steam Mop .......................................................................... 12

Troubleshooting Guide ............................................................................. 14

THIS MANUAL COVERS MODEL NUMBER:

S7000UK 11

TECHNICAL SPECIFICATIONS

Voltage: 220-240V~, 50/60Hz
Power: 1250 Watts
Water Capacity: 350 ml

3 4080 0 862 0 453 www.sharkclean.eu

IPX4

When assembling your steam mop there may be a little water in or around the water tank. This is because we test all
our steam mops 100% before you buy them, so you get a quality Shark

®

Multi-Function Steam Mop Lite.

Assembling Your Steam MopGetting Started

a

j

b

k

l

c

m

d

e

n

f

g

fig. 1 fig. 2

h

i

a Mop Handle
b Cord Clip

(XBTEC LP03)

c Water Tank Cap
d Handheld Steamer
e Power Button
f Release Button
g Rectangle Mop Head ( 3072SO7000 )
h All Purpose Cleaning Pad for Rectangle Head (x2) ( P159W )

j Concentrator Nozzle

(3011FO2901)

k Accessory Hose (3010F O2901)
l Grout Scrubber Brush (108 1SO)
m Window Squeegee ( 1078 SO)
n Filling Flask (1039SO)

IMPO RTANT: Always make sure the mop is

UNPLUGGED from the wall when not in use. Never

fill the mop, attach the mop head, change or remove
the cleaning pad when the mop is plugged into the
wall. To prolong the life of your Shark® Multi-Function
Steam Mop Lite we recommend using distilled water.
Make sure you only add water to the tank. Chemicals
or cleaning solution may damage the appliance and
could be unsafe for you and your family.

STEAM MOP ASSEMBLY

1 Insert the Mop Handle end with the “ “ facing the

front of the unit into the handheld steamer. Push the
mop handle in until you hear it click into place. (fig. 1)

2 Snap the mop head into the mop body by lining up

the groove on the back of the mop body with the
groove on the back of the mop head. Push until you
hear it latch into place. Press the release button to
remove or change the mop head. (fig. 2)

3 Place the cleaning pad on the floor with the logo

side facing up. Place the Shark
Steam Mop Lite on top of the pad to attach.

®

Multi-Function

i Carpet Glider ( XCG7000)

5 6080 0 862 0 453 www.sharkclean.eu

Using Your Steam Mop

IMP ORTAN T: Make sure you do not use the mop

without attaching a cleaning pad and adding water
to the tank first. When you are using the mop for the
first time, it might take longer than the normal 30
seconds to start steaming.

5 Clean your floors with a forward and backward

motion.

6 Use the reusable, all-purpose cleaning pad to lift up

and lock away all the dirt and debris.

7 When the water tank is empty, the Steam Mop will

stop producing steam. You can refill the water tank
at any time as long as the mop is unplugged from
the outlet. Follow the instructions from page 4. This
applies to switching the mop head or cleaning pad
as well.

NOTE: Please wait 2-3 minutes for the Steam Mop

to cool off before switching the mop head or the
cleaning pad. Never leave the Steam Mop with a
damp/wet cleaning pad on any floor.

8 When you are done, press the power button to turn

the steam mop off.

fig. 3

1 Turn the water tank cap anticlockwise and remove

from the tank. (fig. 3)

2 Use the filling flask and pour water into the tank. Do

not overfill. Replace the cap on the water tank. (fig. 4)

IMPORTANT: Do not use on unsealed wood or

unglazed ceramic floors. On surfaces that have been
treated with wax or some no wax floors, the sheen
may be removed by the heat and steam action. It
is always recommended to test an isolated area
of the surface to be cleaned before proceeding.
We recommend that you check the use and care
instructions from the floor manufacturer.

fig. 5

fig. 6fig. 4

NOTE: To prolong the life of your Steam Mop, we

recommend using distilled water.

NOTE: Sweep or vacuum your floors prior to cleaning

with your Steam Mop.

3 Pull and twist the quick release cord holder to

unwrap the power cord completely. Plug into an
electrical outlet. (fig. 5)

4 Press the power button to turn the unit on. (fig. 6)

Using Your Carpet Glider

fig. 7

THE CARPET GLIDER

1 The Carpet Glider can be used with the Rectangular

Head to lightly steam your carpet and area rugs.
Just place the mop head with cleaning pad attached
into the glider. (fig. 7)

The Steam Mop will not clean your
carpeting or area rugs. However, it is
great for grooming and freshening.

fig. 8

2 Move the Steam Mop back and forth across a

section of the carpet. (fig. 8)

7 8080 0 862 0 453 www.sharkclean.eu

Using Your Handheld Steamer

Your Shark® Multi-Function Steam Mop Lite is designed
to clean surfaces that will withstand high heat and
moisture. Do not use on unsealed wood surfaces
(especially wooden antique furniture), unglazed ceramic
tile, painted surfaces or surfaces that have been treated
with wax, oils, varnishes, or shellac. The sheen may be
removed by the heat, steam, and friction of the cleaning
tools. Lacquer and polyurethane coatings provide a hard
durable protective finish that withstands moisture, but it
is always recommended to test an isolated area of the
surface to be cleaned before proceeding.

We also recommend you check the use and care
instructions from the surface manufacturer.

When cleaning finished wood sur faces, use broad,
continuous cleaning strokes. To prevent surface damage,
avoid focusing steam or allowing the cleaning tools to sit
in one spot for any amount of time.

Using Your Removable Handheld Steamer
with the Different Accessories

Release

Button

fig. 10

fig. 9

1 To remove the Handheld Steamer, press and hold

down the Handle Release Button while pulling out
the handle. (fig. 9)

2 To remove the mop head, press the mop head

release button and pull the mop head off. (fig. 9)

9 10080 0 862 0 453 www.sharkclean.eu

fig. 11

1 First attach the Accessory Hose to the Handheld

Steamer by snapping the Accessory Hose into the
main nozzle. (fig. 10)

2 Select the desired cleaning tool for use. Follow the

cleaning tool sub-assembly instructions for the
selected tool. (fi g. 11)

3 To remove the Accessory Hose, press and hold

down the Handheld Release Buttons. Then slide out
the Accessory Hose using the grip.

CAUTION: Do not press the power button while

attaching or removing the Accessory Hose.

CAUTION: Do not use the Accessory Hose without

cleaning tools attached.

Using Your Removable Handheld Steamer
with the Different Accessories - cont.

Care of Your Steam Mop

fig. 12

USING THE CONCENTRATOR NOZZLE

Cleaning Tip: The Concentrator Nozzle creates direct
steam spray to clean and sanitise hard to reach nooks &
crannies and other places where germs may build up. Use
the Concentrator Nozzle to loosen and dislodge compact
dirt often found in corner and tight places where traditional
methods and cleaning tools tend to push dirt into, making
it tough to reach and clean. Spray direct steam and wipe
clean with a wet cloth or paper towel.

1 Attach the Concentrator Nozzle by pressing the

nozzle onto the Accessory Hose until it clicks into
place. (fig. 12)

2 Press the power button to start the steamer.

For effective cleaning, hold the steam output nozzle

1-2 inches away from the surface you’re cleaning.

CAUTION: Do not press the power button until the

Concentrator Nozzle is snapped into the accessory
hose of your Handheld Steamer.

3 To remove the Concentrator Nozzle, press and hold

the accessory release button, then pull it out of the
Accessory Hose.

CAUTION: Do not press the power button while

removing the Concentrator Nozzle. Avoid touching
the tip of the Concentrator Nozzle, as this will be very
hot after steaming.

NOTE: The Handheld Steamer may continue to emit

steam for a few seconds after the power button is
pressed to turn the unit off. This is normal, and the
steaming will eventually come to a stop.

fig. 13

USING THE GROUT SCRUBBER

Cleaning Tip: The Grout Scrubber is designed for
removing stubborn messes in hard-to-reach nooks,
corners and in grout where focused scrubbing power
may be needed. It can loosen and dislodge compact dirt
often found in corners and tight places where traditional
methods and cleaning tools tend to push dirt into,
making it dif ficult to reach and clean. Scrub with the
Grout Scrubber and wipe clean with a cleaning cloth.

1 Attach the Grout Scrubber by snapping into the

handle of the Accessory Hose until it clicks into
place. (fig. 13)

2 Press the power button to start steaming.

3 To remove the Grout Scrubber, press and hold down

the Accessory release button. Then slide out the tool
out.

CAUTION: Turn the unit off before attaching or

removing the Grout Scrubber

.

fig . 14

USING THE WINDOW SQUEEGEE

Cleaning Tip: To use the window squeegee, work with
the vapor jet down using top to bottom movements. To
do this without leaving streaks, use lateral movements
from the top to the bottom of the surface.

CAUTION: Always avoid any sudden changes

in temperature to prevent breakage of cracks in
windows.

1 Attach the Window Squeegee by snapping into the

handle of the Accessory Hose until it clicks into
place. (fig . 14)

2 Press the power button to start steaming.

3 To remove the Window Squeegee, press and hold

down the Accessory release button. Then slide out
the Window Squeegee.

CAUTION: Turn the unit off before attaching or

removing the Window Squeegee.

fig. 15

AFTER USE AND STORAGE

1 Press the power button to turn the unit off. Unplug

the cord from the outlet and place the mop into the
upright position. Let the unit cool for 2-3 minutes.

2 When you have finished using the Handheld Steamer,

reattach the handle to the handheld steamer.

3 Remove the cleaning pad from the mop head by

placing one foot on the tab of the all-purpose carpet
pad and lifting the Shark
Lite, avoiding bare skin contact with the hot pad or dirt.

4 Empty the water tank before storage. Remove the

water tank cap and empty the tank over a sink.
Replace the water cap.

5 To store the Shark

hanging up, first remove the head (after it has cooled
and the steam has been released) then hang on a
large hook. (fig. 15)

®

Multi-Function Steam Mop

®

Multi-Function Steam Mop Lite

11 12080 0 862 0 453 www.sharkclean.eu

Care of Your Steam Mop- cont.

40°

fig. 16

fig. 17

CARE OF YOUR CLEANING PADS

1 We recommend washing your cleaning pads

separately from other fabrics to avoid picking up
lint. For optimal cleaning performance, the pads
may need to be washed up to (3) three times. Only
use liquid detergent (no powder detergent). Do not
use any fabric softeners or bleach. Line dr y. Do not
tumble dry. (fig. 16)

2 If there are loose threads on the cleaning pads,

carefully cut the thread with scissors. Do not pull on
them or cut at the base. (fig. 17)

IMPO RTANT: The cleaning pads may be very hot

from the steam. Use caution when removing. Let the
unit cool for 2-3 minutes.

DECALCIFYING YOUR STEAM MOP

Calcium and mineral deposits can build up and

impact the per formance of your steam mop
over time. To extend the life of your product we
recommend that you use distilled water.

fig. 18

CLEANING THE NOZZLE

NOTE: To prevent clogging, it is recommended that

you periodically clean the Direct Steam Nozzle and
the extension hose stem.

1 Your Handheld Steamer should not normally require

cleaning, however, should you notice a decrease in
the steam output, it may be necessary to remove
mineral deposits built up around the nozzles.

2 Unplug the cleaner from the electrical outlet.

3 Use a small diameter stiff metal wire, such as a

straightened metal paperclip, and carefully insert the
end of the wire into the nozzle orifice. See illustration
above. (fig. 18)

4 Move the wire back and forth several times to remove

any deposits.

5 Plug in the appliance to the power outlet and test

steam output.

Troubleshooting Guide

PROBLEM POSSIBLE REASONS & SOLUTIONS

The Shark® Multi-Function
Steam Mop Lite will not
turn-on.

The unit will not make steam.

The Shark® Multi-Function
Steam Mop Lite leaves water
on the floor.

The Shark® Multi-Function
Steam Mop Lite left a white
spot on the floor.

Floors are cloudy, streaky or
spotty after steaming.

The Shark® Multi-Function
Steam Mop Lite is hard to
push.

Your steam mop should be securely plugged into an electrical outlet only.

Check your fuse or breaker.

Is there water in the water tank? If not, add water to your steam mop following
instructions on page 4.

When using the unit in the handheld mode, ensure that you are holding the
handheld unit horizontally to optimize the steam output. Do not hold the
handheld unit vertically as this will impede steam production. Use the hose with
your chosen accessory to reach difficult areas and above floor cleaning whilst
maintaining the horizontal position of the handheld unit.

If the unit still does not make steam, follow the instructions on page 13 to clean
the nozzle.

Check to see if your cleaning pad is too wet. We recommend you unplug the
steam mop and change the cleaning pad.

Make sure the cleaning pad is attached correctly.

Do not leave your steam mop on the floor with a damp or wet cleaning pad.

If you’re using tap water, we recommend switching to distilled water.

Make sure the cap is securely on the water tank.

The cleaning pad might be dirty. Change the cleaning pad.

If you washed the cleaning pad with powder detergent, then your pad could be
damaged and require replacement. Replacement pads are available at
www.sharkclean.eu.

This could also be an indication of prior soap or grease residue that has
accumulated on the floor. As our steam mops use only a small amount of
water, it may not be wet enough to rinse off the accumulation that the steam
is bringing to the surface. We suggest rinsing the floor with nothing but water,
letting it dry, and then steam mopping again with a clean pad. One or more
rinses generally removes the residue.

A more stubborn case may require you to rinse the floor with a mix of one part
vinegar and two parts water.

Make sure the cleaning pad is attached correctly.

Check to see if the cleaning pad is excessively dirty. If so, replace the cleaning
pad.

13 14080 0 862 0 453 www.sharkclean.eu

Euro-Pro Europe LTD
15 Mariner Court
Calder Park
Wakefield
WF4 3F L

0800 8 62 0453
www.sharkclean.eu

Technical Details
Model number: S7000UK 11
Input: 1250 Watts
Main unit voltage: 220-240V~, 50/60Hz

Euro-Pro and Shark are trademarks of Euro-Pro
Operating LLC. All other brand names may be
trademarks of their respective owners.

COPY RIG HT © EU RO-PRO OPERATING LLC 2014

Illustrations may differ from actual product.

PRINTED IN CHINA

S70 00UK_11_I B_ E_150 62 3_ 4

IPX4