SHARP S257 Technical Report

COPIER : SF-1020/1120

Date

Jul. 13, 1998

No. : S-257

CHANGE CARRIED OUT IN THE HANDLING OF THE WIRES OF THE DRY HEATER.

1.Model Name: SF-1020/1120 (only for machines bound for the Taiwan market).

2.General: The snap band used with the dry heater before it is installed has been discontinued in

one location, and a binding operation is carried out on the cord when the dry heater is installed. This action has been carried out in accordance with conditions surrounding the handling of the wires of the dry heater.

Changed from the binding band attached by the maker to an attachment operation carried out during the assembly process of the machine.

Note: In accordance with the change described above a change has also been

carried out in the part code. There has been no change, however, in the actual dry heater.

3.Action: ∗ Japanese domestic production: From the start of 1998 May production.

Chinese (SOCC) production: From the start of 1998 April production.

Ref.

Model

No.

name

SF-1020 SF-1120

1. Interchangeable. 4. Not interchangeable.

2. Current type can be used in place of new type. New type cannot be used in place of current type.

3. Current type cannot be used in place of new type. New type can be used in place of current type.

Parts marked with " " is important for maintaining the safety of the set. Be sure to replace these parts with

specified ones for maintaining the safety and performance of the set.

Version P/G No.

Taiwan

8 -10

Current parts New parts

Parts code Parts code

CR-WZ0460FC01 CR-WZ0460FC02 AY Dry heater ∗ 1

Price

5. Interchangeable if replaced with same types of related parts in use.

6. Others.

Parts name

rank

Effec-

tive

time

Inter-

change-

ability

Note

SHARP CORPORATION Reprography Division

Green