SHARP S253 Technical Report

DUPLICATOR : SD-2275N

Date

Jul. 10, 1998

No. : S-253

CHANGE CARRIED OUT IN THE SCREWS AND THE RETAINER OF THE AC CORD.

1.Model Name: SD-2275N (only for machines bound for the SEEG market)

2.General: A change was carried out in the AC cord as a measure to increase the electrical current

capacity, but with the new AC cord the original AC cord retainer did not secure the AC cord sufficiently. As a measure to alleviate this problem a change has been carried out in the retainer of the AC cord and the screws which secure it.

3.Action: From the start of 1998 June production.

Ref.

Model

No.

name

D-2275N

1. Interchangeable. 4. Not interchangeable.

2. Current type can be used in place of new type. New type cannot be used in place of current type.

3. Current type cannot be used in place of new type. New type can be used in place of current type.

Parts marked with " " is important for maintaining the safety of the set. Be sure to replace these parts with

specified ones for maintaining the safety and performance of the set.

Version P/G No.

46 -15

∗

46 -14 XBPSD40P20XS0 XBPSD40P25KS0 AA Screw (M4×25)

Current parts New parts

Parts code Parts code

LFIX-0016FCZZ LFIX-0084FCZZ AC AC cord holder

∗ Only for machines bound for the SEEG market.

Effec-

Price

5. Interchangeable if replaced with same types of related parts in use.

6. Others.

Parts name

rank

tive

time

1st lot

'98/6

Inter-

change-

ability

Note

SHARP CORPORATION Reprography Division

Green