Sharp R890NW, R890NS User Manual

R-890N(S)/(W)

QUICK START GUIDE

1 DIGITAL DISPLAY 2 MULTI COOK pad 3 CONVENIENCE/PIZZA pad 4 MORE, LESS pads 5 GRILL pad 6MIXpad

7 NUMBER AND

TEMPERATURE pads

8 STOP/CLEAR pad

9 EASY DEFROST pad 10 HELP pad 11 CONVEC pad 12 PREHEAT pad 13 POWER LEVEL pad 14 CLOCK pad

INSTANT COOK/START pad

16 INSTANT ACTION pads

TINS-A761WRRZ-J81

1. Remove all packaging and

accessories from the oven, including the

feature sticker fixed to the outside of the door

and the wrapping shown in the diagram. DO NOT REMOVE THE WAVEGUIDE COVER, this can be found on the right hand side wall inside your microwave. Please see page 4 in the operation manual.

2. Ensure there is free space at least 40cm on the top and 5cm on both sides and at the rear of the oven.

3. Ensure the turntable parts are assembled as shown in the diagram opposite.

Other Accessories

The racks are for Grill, Mix, Convection and recommended automatic

operations.

40cm

５cm

Plug in the oven and switch on the

power. Nothing will be shown in

the display at this time.

Open the door, the display will flash the message shown opposite (1).

Close the door. The display will show (2).

The oven is now ready for use.

If you want to set the clock, press the CLOCK pad

once and follow the instructions in Step 3 below.

IMPORTANT

The oven has an Energy Save mode, for details refer to page 8 of your

Operation Manual.

• The oven will default to Energy Save Mode after 3 minutes if not used. Whilst in Energy Save Mode the display is blank and the

oven cannot be used.

• To remove Energy Save Mode, open and then close the door, “.0” will be displayed and the oven

is ready for use.

• To remove Energy Save Mode permanently, set the clock.

GETTING STARTED

INSTALLATION

Your oven is fitted with a 12 hour clock.

To set the time of day, ensure the door is closed and

follow the guidelines given below:

1. Press the CLOCK pad once.

2. Enter the time of day by pressing the numbers

in sequence. (EX: 11:34 am or pm)

3. Press the CLOCK pad again to start the clock.

If you

require any

advice or assistance regarding your Sharp product, please visit our Website or call

Sharp Customer Care.

Website:

Australia: www.sharp.net.au

New Zealand: www.sharp.net.nz

Sharp Customer Care:

1 300 135 022 (Australia)

09 573 0111 (New

Zealand)

SETTING

THE

CLOCK

MICROWAVING

To cook for 2 minutes 30 seconds at 70% power level.

1. Enter the cooking time by pressing the numbers in sequence.

2. Select the power by pressing the POWER LEVEL pad twice.

3. Press the INSTANT COOK/START pad once to

start cooking.

4. The display will count down through cooking time.

WARNING:

Befor

e starting, read carefully all the warnings given in the full operation manual for the safe use of your oven.

NOTE FOR REHEATING READY MEALS:

Place the ready meal in a heat-resistant flan dish on the low rack.

POWER LEVEL

INSTANT COOK

START

CLOCK