SHARP ELECTRONICS DIVISION OF SEARTEC GROUP TRADING (PTY) LTD (“the Company”) guarantees to the
original purchaser that the product sold with this certificate is free of defects in material or workmanship under normal
use and service for a period of 2 (two) years from the date of purchase thereof, subject to the following conditions:
1. The guarantee shall apply to the product, provided the product is still owned by the original purchaser and provided
further that it was purchased in and is retained for use in the Republic of South Africa, Swaziland, Lesotho,
Botswana, South West Africa (Namibia) and all territories formerly falling within the boundaries of the Republic of
South Africa (as constituted on 31 May 1961).
2. At any time within 2 (two) years from the date of invoice issued to the original purchaser, the Company shall, at its
election, repair or replace, entirely free of charge as its own branch or authorised service dealer, any part in the
product found to be defective by such Company branch or authorised service dealer. If the original purchaser
resides in an area situated beyond a 50 kilometer radius from the nearest Company branch or authorised service
dealer, all travelling expenses incurred by the Company in connection with repair or replacement of the product shall
be for the original purchaser’s account.
3. It is a condition of this guarantee that the Company shall not be responsible for any transportation, labour, material
or any other costs not specified in the clauses contained herein.
4. Installation, operation, maintenance and servicing of the product must be carried out in accordance with the
Company instructions as contained in this booklet or in the product packaging, and any failure to do so will render
the guarantee null and void.
5. The Company shall not be responsible for damage to the product resulting from: incorrect voltages or faults in the
electrical power supply system; general misuse or abuse of the product; failure to use the product for the purpose
for which it was designed; fire, flood, war, civil disturbances, strikes, lookouts, acts of God, acts of Government or
quasi-Government, or any other cause beyond the reasonable control of the Comapny.
6. The Company shall not accept any responsibility or liability for any loss suffered by or damage of any kind caused
to the original purchaser or any other person by or due to failure of operation or malfunction of the product or for
consequential damage of whatsoever nature, whether such loss, damage or consequential damage was suffered
by the original purchaser or any other person.
7. Should the product be worked on by anyone other than a Company branch or authorised service dealer or be found
to contain any component parts or accessories other than product component parts or accessories, this guarantee
will become null and void.
8. The defacement or removal of the nameplate and/or serial number from the product will render the guarantee null
and void.
9. The guarantee does not apply to light bulbs or fuses nor to vitreous enamelware or other similar finishes nor to
external cables and plugs where the length of life depends on the amount of use and care given.
10. Save as set out in this guarantee, no terms, conditions, provisions, representations or statements (whether express
or implied) shall be of any force or effect whether made prior to, on, or subsequent to the date of original purchase,
unless the same shall have been confirmed in writing by the Company.
11. Failure to submit the guarantee Registration Certificate (contained herein or in the product packaging) within a
period 30 (thirty) days of date of original purchase, or to produce documentary proof of ownership and date of original
purchase prior to guarantee repair and/or replacement of any defective part being carried out by the Company, will
render the customer liable for all costs incurred by the Company inclusive of parts, repairs, labour, travelling and
transportation even if the product still falls within the period of guarantee cover. The same condition will apply in
respect of service calls where the product is found to be free from defects in material or workmanship.
12. This undertaking is given in lieu of any liability of the Company at common low, whether in respect of patent and/
or latent defects, express and/or implied representations or guarantees and/or in contract and/or in delict and/or
otherwise, and any such liability is hereby expressly excluded.
Microwave Special Conditions
Failure to observe the following conditions will forthwith render the guarantee null and void:
(i) Metal or tinfoil objects must not be placed in the oven.
(ii) The oven must not be operated if the oven is empty.
(iii) No object must be placed on top of the oven.
(iv) Abrasive and harsh cleaners must not be used. Hot water and mild detergent are sufficient.
(v) This product is not suitable for commercial or laboratory use.
(vi) In the unlikely event of failure please route your service call through your service dealer. Alternatively contact one
of the Company branches.
(vii) In the event of repair or replacement of defective parts being necessary, the product should be delivered to the
nearest service dealer.
* THIS GUARANTEE IS APPLIED ONLY IN THE REPUBLIC OF SOUTH AFRICA, SWAZILAND, LESOTHO,
BOTSWANA, SOUTH WEST AFRICA (NAMIBIA) AND ALL TERRITORIES FORMERLY FALLING WITHIN THE
BOUNDARIES OF THE REPUBLIC OF SOUTH AFRICA (AS CONSTITUTED ON 31 MAY 1961).
CONTENTS
Guarantee Inside of front cover
page
INTRODUCTION
®
Thank you for buying a Sharp Microwave Oven.
Please keep this operation manual handy, as it
describes all the features of your oven and
will enable you to cook many varieties of foods.
The manual is divided into two sections:
1. OPERATION (P2~P15)
This section describes your oven and teaches
you how to use all the features.
2. COOKING GUIDE
This section is at the back of the manual,
it contains the more commonly used information
such as how to prepare food, which cooking utensil
to use, standing time.
it also contains recipes for automatic cooking
and manual cooking.
Introduction1
Important Safety Instructions2
Installation Instructions4
Oven Diagram4
Operation of Touch Control Panel5
Control Panel Display5
Touch Control Panel Layout5
Before Operating6
Getting Started6
Clock Setting6
Stop/Clear6
To Cancel a Programme During Cooking
Manual Operations7
Microwave Time Cooking7
Sequence Cooking8
Instant Cook8
Increasing Time During a Cooking Programme
Automatic Operations10
Notes for Automatic Operations10
Instant Action10
6
9
Please take some time to read your operation
manual carefully, paying particular attention to the warnings and special notes, the automatic cooking
menus programmed into your new oven have been
carefully developed to give optimum results when the step by
step instructions are followed.
When selecting another home appliance,
please again consider our full range of Sharp
products.
1
Express Defrost11
Easy Defrost12
Other Convenient Features13
Less/More Setting13
Timer14
Child Lock14
Demonstration Mode14
Alarm14
Care and Cleaning15
Service Call Check15
Specifications15
Cooking Guides1-N
Quick Reference GuideSee last page
IMPORTANT SAFETY INSTRUCTIONS
READ CAREFULLY AND KEEP FOR FUTURE REFERENCE.
Warning
To avoid the danger of fire
1. The microwave oven should not be left unattended
during operation. Power levels that are too high or
cooking times that are too long may overheat foods
resulting in a fire.
2. This oven is not designed to be built-in to a wall or
cabinet.
3. The electrical outlet must be readily accessible so
that the unit can be unplugged easily in an emergency.
4. The
5. It is recommended that a
6.
7.
8.
9. If food being heated in the oven begins to smoke,
10. Use only microwave-safe
11.
12.
13.
14. Do not block the ventilation openings.
15.
16.
17. To make
18.
19.
20. Do not put things on top or cover the outer cabinet.
21. To avoid overheating and fire, special care must be
AC power supply must be 220V, 50Hz.
separate circuit serving
only this appliance be provided.
Do not place the oven in areas where heat is
generated. For example, close to a conventional
oven.
Do not install the oven in an area of high humidity
or where moisture may collect.
Do not store or use the oven outdoors.
DO NOT OPEN THE DOOR. Turn off and unplug
the oven and wait until the food has stopped
smoking. Opening the door while food is smoking
may cause a fire.
containers and utensils.
Do not leave the oven unattended when
using disposable plastic, paper or other combustible food containers.
Clean the waveguide cover, the oven cavity, the
turntable and roller stay after use. These must be
dry and free from grease. Built-up grease may
overheat and begin to smoke or catch fire.
Do not place flammable materials near the oven or
ventilation openings.
Remove all metallic seals, wire twists, etc., from
food and food packages. Arcing on
metallic surfaces may cause a fire.
Do not use the microwave oven to fry with oil or heat
oil for deep frying. The temperature can not be
controlled and the oil may catch fire.
popcorn, use only special microwave
makers.
Do not store food or any other items inside
the oven.
Check the settings after you start the oven to
ensure the oven is operating as desired.
taken when cooking or reheating foods with a high
sugar or fat content, for example, Sausage rolls,
Pies or christmas pudding.
To avoid the possibility of injury
1. Do not operate the oven if it is damaged or
malfunctioning. Check the following before use.
(1) The door (not warped)
(2) The hinges and safety door latches
(not broken or loose)
(3) The door seals and sealing surfaces
(4) The oven cavity (not dented)
(5) The power supply cord or plug
Do not try to adjust or repair the oven yourself.
2.
It is hazardous for anyone other than a qualified
service technician trained by SHARP to carry out
any service or repair operation.
Especially those which involve the removal of a
cover which gives protection against exposure to
microwave energy are very hazardous.
Do not operate the oven with the door open
3.
or alter the safety door latches in any way.
Do not operate the oven if there is an object
4.
between the door seals and sealing surfaces.
Do not allow grease or dirt to build up on
5.
the door seals and sealing surfaces.
6. Individuals with
with their doctor or the manufacturer of the pacemaker for precautions regarding microwave
ovens.
PACEMAKERS should check
To avoid the possibility of electric shock
1. Under no circumstances should you remove the
outer cabinet.
Never spill or insert any objects into the door lock
2.
openings or ventilation openings. In the event of
a spill, turn off and unplug the oven immediately,
and call a SERVICE CENTRE APPROVED BY
SHARP.
Do not immerse the power supply cord or plug in
3.
water or any other liquid.
Do not let the power supply cord hang over the
4.
edge of a table or counter.
Keep the power supply cord away from heated
5.
surfaces.
6. If the oven lamp fails, consult your dealer or a
qualified service technician trained by SHARP.
7. Should the power supply cord become damaged,
it must be replaced with a special cord supplied
by a SERVICE CENTRE APPROVED BY
SHARP. And it must be replaced by a qualified
service technician trained by SHARP.
2
To avoid the possibility of explosion
and sudden boiling
1. Never use sealed containers. Remove seals and
lids before use. Sealed containers can explode
due to a build up of pressure even after the oven
has been turned off.
2.
When boiling water or other liquids, use a widemouthed container to allow bubbles to escape. It
is advisable to insert a glass rod or other similar
utensil to prevent sudden boiling (resulting in
splashing or burning).
3.
Do not cook eggs in their shells. They may
explode. The explosion may damage the oven or
injure yourself. To cook or reheat eggs which
have not been scrambled or mixed, pierce the
yolks and whites, or the eggs may explode. Shell
and slice hard boiled eggs before reheating them
in the microwave oven.
4.
Pierce the skin on such foods as potatoes,
sausages and fruit before cooking, or they may
explode.
5. Do not use excessive amount of time to heat.
6. Stand at least for 20 seconds at the end of cooking
to avoid delayed eruptive boiling of liquids.
7. Stir the liquid before and during cooking. Use
extreme care when handling the container or inserting a spoon or other utensil into the container.
To avoid the possibility of burns
1. Use potholders or oven gloves when removing
food from the oven to prevent burns.
2. Always
cooking bags, etc., away from the face and hands
to avoid steam burns.
3. Always
when opening it to avoid burns from
escaping steam and heat.
4.
Slice stuffed baked foods after heating to
release steam and avoid burns.
5. Stir the food and the contents of cooking containers, and
giving them to infants, young children or elderly
people to avoid internal burns.
6. Do not catch the utensil, your clothes or accessories on the door safety latches when you take out
the food from the oven.
open containers, popcorn makers, oven
stand back from the oven door
test their actual temperature before
To avoid misuse by children
1. Only allow children to use the oven without supervision when adequate instructions have been
given so that the child is able to use the oven in
a safe way and understands the hazards or
improper use.
2. Children should use ovens only under the
vision of adults.
3.
Do not lean or swing on the oven door. Do not
play with the oven or use it as a toy. Young
children should be supervised to ensure that they
do not play with the oven.
4. Children should
instructions : use of potholders, careful removal
of food coverings; pay special attention to packaging (e.g. self-heating materials)
designed to make food crisp because they may
be extra hot.
be taught all important safety
super-
Other warnings
1.
Never modify the oven in any way.
Do not move the oven while it is in operation.
2.
3. This oven is for
not suitable for commercial or laboratory use.
4. This appliance is not intended for use by young
children or infirm persons without supervision.
Caution
1. Never operate the oven empty except the directed case in the operation manual. Doing so may
damage the oven.
2. When using a browning dish or self-heating material, always place a heat-resistant insulator
such as a porcelain plate under it to prevent
damage to the turntable and roller stay due to
heat stress. The preheating time specified in the
dish’s instructions must not be exceeded.
3. Do not use metal utensils for MICROWAVE cooking, which reflect microwaves and may cause
electrical arcing. Do not put cans in the oven.
4. Use small pieces of aluminium foil to shield food
to prevent over cooking. Keep foil at least 2 cm
from the oven walls.
5. Use only the turntable and the roller stay designed for this oven.
6. To prevent the turntable from breaking:
(a) Before cleaning the turntable with water,
leave the turntable to cool.
(b) Do not put hot foods or hot utensils on the cold
turntable.
(c) Do not put cold foods or cold utensils on the
hot turntable.
7. Do not place anything on the outer cabinet during
operation.
home food preparation only. It is
- To prevent trouble with the
oven or damage.
Note
1. If you are not sure how to connect your oven,
please consult a qualified electrician.
2. Neither the manufacturer nor the dealer can
accept any liability for damage to the oven or
personal injury resulting from failure to observe
the correct electrical connection procedure.
3. Water vapour or drops may occasionally form on
the oven walls or around the door seals and
sealing surfaces. This is a normal occurrence and
is not an indication of leaking of microwaves or a
malfunction.
4. The cooking times given in the cook book are just
for your guidance, and will vary according to
altitude, food structure or food size.
3
INSTALLATION INSTRUCTIONS
1. Remove all packing materials from the oven cavity and the feature sticker from the oven door panel (if available).
Check the unit for any damage, such as a misaligned door, damaged door seals around the door or dents inside
the oven cavity or on the door. If there is any damage, please do not operate the oven until it has been checked
by a SERVICE CENTRE APPROVED BY SHARP and repaired, if necessary.
2. Accessories provided
1) Turntable2) Roller Stay3) Operation manual and cooking guide
3. Locate the roller stay in the centre of the oven, then fit the turntable on the roller stay. Make sure the turntable
and roller stay are centrally located and locked together. Refer to OVEN DIAGRAM below. NEVER operate
the oven without the roller stay and turntable.
4. The oven should not be installed in any area where excessive heat and steam are generated, for example,
next to a conventional oven unit.
The oven should be installed so as not to block ventilation openings.
Allow space of at least 15cm from top of the oven for air ventilation.
This oven is not designed to be built-in to a wall or cabinet.
5. Neither the manufacturer nor the distributors can accept any liability for damage to the machine or personal
injury for failure to observe the correct electrical connecting procedure.
The A.C. voltage and frequency must be single phase 220V, 50Hz.
6. WARNING - THIS APPLIANCE MUST BE EARTHED.
If the socket outlet in your house is not compatible with the pulg supplied, cut-off the mains plug and fit an
appropriate type, observing the wiring cord below.
If you are unsure how to do this get help from an electrician.
IMPORTANT - The wires in the power supply cord are coloured in accordance with the following cord:
As the colours of the wires in the power supply cord of this appliance may not correspond with the coloured
marking identifying the terminals in your plug, proceed as follows:
The wire which is coloured green-and-yellow must be connected to the terminal in the plug which is marked
with the letter E or by the earth symbol
The wire which is coloured blue must be connected to the terminal which is marked with the letter N or
coloured blue.
The wire which is coloured brown must be connected to the terminal which is marked with the letter L or
coloured brown.
Make sure the terminal screws are properly tightened and the power supply cord is held tightly by the cable
grip where it enters the plug.
NOTE: Under no circumstances should the cut-off plug be inserted into a socket outlet as a serious electric
shock may occur.
Green-and-yellow: Earth
Blue: Neutral
Brown: Live
or coloured green or green-and-yellow.
OVEN DIAGRAM
1. Door open button
2. Oven lamp
3. Door hinges
4. Door safety latches
5. See through door
6. Door seals and sealing surfaces
7. Coupling
8. Waveguide cover (Do not remove)
9. Control panel (See page 5)
10. Liquid crystal display
11. Ventilation openings
12. Power supply cord
13. Rating plate
14. Turntable
15. Roller stay
4
OPERATION OF TOUCH CONTROL PANEL
The operation of the oven is controlled by pressing the appropriate pads arranged on the surface of the control panel.
An entry signal tone should be heard each time you press the control panel to make a correct entry.
In addition an audible signal will sound for approximately 2 seconds at the end of the cooking cycle, or 4 times
when cooking procedure is required.
Control Panel Display
Indicators
Touch Control Panel Layout
1
2
4
5
7
1. INSTANT ACTION PADS
Press to cook or reheat 8
popular menus.
2. EXPRESS DEFROST PAD
Press to select the Express
Defrost menu.
3. EASY DEFROST PAD
Press to select
the Easy Defrost menu.
4. NUMBER PADS
Press to enter cooking time,
clock time, weight of food.
5. POWER LEVEL PAD
Press to select microwave
power setting.
If not pressed, HIGH is
automatically selected.
Press to alter the cooking
result for automatic
operations.
6. TIMER/CLOCK PAD
Press to set clock, timer,
child lock or demonstration mode.
3
6
8
7. STOP/CLEAR PAD
Press to clear during programming.
Press once to stop operation of
oven during cooking; press twice
to cancel cooking programme.
8. INSTANT COOK/START PAD
Press to start oven after setting
programmes.
Press once to cook for 1 minute
at HIGH or increase by 1 minute
multiples each time this pad is
pressed during cooking.
5
BEFORE OPERATING
Getting Started
Step
Plug the oven into a power point.
Ensure the oven door is closed.
ProcedurePad OrderDisplay
1
Press the STOP/CLEAR pad so that the
oven beeps.
2
Clock Setting
* To enter the present time of day 11:34 (AM or PM).
Step
Press the TIMER/CLOCK pad.
ProcedurePad OrderDisplay
1
Enter the correct time of day by pressing
the numbers in sequence.
2
Flashing eights
STOP
CLEAR
Only the dots will remain.
TIMER
CLOCK
The dots (:) will flash on and
off.
Press the TIMER/CLOCK pad again.
3
This is a 12 hour clock. If you attempt to enter an incorrect clock time (eg. 13:45), will appear in the
display. Press the STOP/CLEAR pad and re-enter the time of day (eg. 1:45).
If you wish to know the time of day during the cooking or timer mode, press the TIMER/CLOCK pad. As long
as your finger is pressing the TIMER/CLOCK pad, the time of day will be displayed.
TIMER
CLOCK
Stop/Clear
Press the STOP/CLEAR pad once to:
1. Stop the oven temporarily during cooking.
2. Clear if you make a mistake during programming.
To Cancel a Programme During Cooking
Press the STOP/CLEAR pad twice.
6
MANUAL OPERATIONS
Microwave Time Cooking
This is a manual cooking feature, first enter the cooking time then the power level.
There are five different power levels. You can programme up to 99 minutes, 99 seconds.
–
10%
–
–
(LOW)
Power level
Display
Examples of foods typically cooked on microwave
oven power level
This variable cooking control allows you to select the rate of microwave cooking.
If a power level is not selected, then 100% power is automatically used.
* Suppose you want to time cook for 2 minutes 30 seconds on100% power.
Step
Enter desired cooking time.
ProcedurePad OrderDisplay
–
–
–
–
–
Keeping food
warm
–
30%
–
–
(MEDIUM
–
–
LOW)
–
–
–
–
–
–
–
–
–
Defrost
–
–
–
Softening
–
–
butter
–
–
–
50%
–
–
(MEDIUM)
–
–
–
–
–
–
–
–
–
–
–
–
Casseroles
–
–
–
–
–
–
–
–
–
(MEDIUM
–
–
–
–
–
–
–
–
–
–
Cakes
–
–
–
Muffins
–
–
Slices
–
Seafood
1
Press the INSTANT COOK/START pad.
INSTANT COOK
START
2
70%
HIGH)
START will flash on and off.
The timer begins to count
down.
–
100%
–
–
(HIGH)
–
–
–
–
–
–
–
–
–
–
–
Vegetables
–
–
–
Rice/Pasta
–
–
Fruit
–
–
–
–
–
–
–
–
–
–
To lower the power press the POWER LEVEL pad until desired power level is displayed.
* Suppose you want to cook Fish Fillets for 10 minutes on 50% power.
Step
Enter desired cooking time.
ProcedurePad OrderDisplay
1
START will flash on and off.
Select power level by pressing the POWER
LEVEL pad as required (for 50% press three
2
times).
Press the INSTANT COOK/START pad.
POWER
LEVEL
x 3
INSTANT COOK
START
3
The timer begins to count
down.
If the door is opened during cooking process, the cooking time in the readout automatically stops. The cooking
time starts to count down again when the door is closed and the INSTANT COOK/START pad is pressed.
If you wish to know the power level during cooking, press the POWER LEVEL pad. As long as your finger is
touching the POWER LEVEL pad, the power level will be displayed.
If more than 40 minutes is entered, the microwave power will be reduced after 40 minutes to avoid overheating.
7
Sequence Cooking
Your oven can be programmed for up to 3 automatic cooking sequences, switching from one variable power
setting to another automatically.
* Suppose you want to cook for 10 minutes on 50% followed by 5 minutes on 100%.
Step
Enter desired cooking time.
ProcedurePad OrderDisplay
1
Select desired power level by pressing the
POWER LEVEL pad (for 50% press three
2
times).
For second sequence, enter desired time
for cooking time.
3
If power is not selected the oven will operate
at 100% power.
Press the INSTANT COOK/START pad.
4
START will flash on and off.
POWER
LEVEL
x 3
INSTANT COOK
START
The timer begins to count
down to zero. When it
reaches zero,
the second sequence will
appear and the timer will
begin counting down to zero
again.
Instant Cook™
For your convenience Sharp’s Instant Cook allows you to easily cook for one minute on 100% power.
Step
Press the INSTANT COOK/START pad.
Within 3 minutes of closing the door.
1
Press the INSTANT COOK/START pad until desired time is displayed.
Each time the pad is pressed, the cook time is increased by 1 minute.
ProcedurePad OrderDisplay
INSTANT COOK
START
The timer begins to count
down.
8
Increasing Time During a Cooking Programme
Microwave time can be added during a cooking programme using the INSTANT COOK/START pad.
* Suppose you want to increase the cooking time by 2 minutes during 5 minutes on 50% power cooking.
(at the moment the remaining cooking time is 1 min. 30 sec.)
Step
Enter desired cooking time.
ProcedurePad OrderDisplay
1
Select power level by pressing the POWER
LEVEL pad as required.
2
(for 50% press three times)
Press the INSTANT COOK/START pad.
3
Press the INSTANT COOK/START pad
twice to increase the cooking time by two
4
minutes.
START will flash on and off.
POWER
LEVEL
x 3
INSTANT COOK
START
The timer starts to count
down.
INSTANT COOK
START
x 2
9
AUTOMATIC OPERATIONS
Notes for Automatic Operations
1. When using the automatic features, carefully follow the instructions provided in each MENU GUIDE to
achieve the best result.
If the instructions are not followed carefully, the food may be overcooked or undercooked or
displayed.
2. Food weighing more or less than the quantity or weight listed in each MENU GUIDE, cook manually. Refer
to manual cooking charts in RECIPES section.
3. To change the final cooking or defrosting result from the standard setting, press the POWER LEVEL pad once
(for more) or twice (for less) after selecting desired setting. Refer to page 13.
4. The final cooking result will vary according to the food condition (e.g.initial temperature, shape, quality).
Check the food after cooking and if necessary continue cooking manually.
5. To avoid children's misuse, each INSTANT ACTION pad can be used only within 3 minutes of a preceding
operation.
6. To defrost foods above or below the weights allowed on the EXPRESS DEFRROST MENU GUIDE, use
EASY DEFROST or defrost manually.
7.
8. When entering the weight of the food, round off the weight to the nearest 0.1kg(100g). For example, 1.65kg
will be displayed if:
more or less than weight of foods suggested in EASY DEFROST MENU GUIDE is programmed when the
INSTANT COOK/START pad is pressed.
To clear, press the STOP/CLEAR pad and reprogramme.
would become 1.7kg.
Instant Action
The Instant Action allows you to cook or reheat several
popular foods.
Follow the instructions provided in INSTANT ACTION MENU
GUIDE on page
3 and 4 of the cooking guides.
may be
* Suppose you want to cook 2 Jacket Potatoes.
Step
Press the JACKET POTATO pad until
desired quantity is displayed (for 2 pieces press twice).
ProcedureDisplay
1
Open the door. Turn over potatoes.
Close the door.
2
Press the INSTANT COOK/START pad.
3
Pad Order
JACKET
POTATO
x 2
After about 2 sec.
The cooking time will begin counting
down. The oven will "beep" 4 times
and stop. COOK indicator will go off
and CHECK will flash on and off.
START will flash on and off.
INSTANT COOK
START
The cooking time will begin counting
down. When it reaches zero, the oven
will "beep".
10
Express Defrost
EXPRESS
DEFROST
* Suppose you want to defrost 0.5 kg of Chicken Fillets.
Step
Press the EXPRESS DEFROST pad until
the desired menu number is displayed (for
Chicken Fillets press twice).
1
Press the INSTANT COOK/START pad.
ProcedurePad OrderDisplay
2
Open the door. Remove defrosted pieces,
turn over remaining pieces.
3
Close the door.
EXPRESS DEFROST rapidly defrosts 0.5 kg of
specific foods.
Follow the instructions provided in EXPRESS
DEFROST MENU GUIDE on page
cooking guides.
EXPRESS
DEFROST
x 2
INSTANT COOK
START
The defrosting time will begin counting down. The oven
will "beep" 4 times and stop.
COOK indicator will go off
and CHECK will flash on
and off.
5 of the
Press the INSTANT COOK/START pad.
4
START will flash on and off.
INSTANT COOK
START
The defrosting time will begin counting down. When it
reaches zero, the oven will
"beep".
11
Loading...
+ 30 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.