SHARP PCE053 Technical Report

Date: Jun. 9, 1998

COPIER: Z-810

[Service Information]

Increase of conductivity of transfer roller and PS upper roller shaft

1. Model Name: Z810 Series

2. General: The shape is partially changed to increase the conductivity by bringing the grounding spring

No. : PCE-053

of the PS roller into contact with the static eliminating brush which is the conductive part of the transfer roller shaft/PS roller shaft.

3. Description: (1) PS roller grounding spring

<Abolishment> PS roller grounding spring N (MSPRC2456FCZ1) → Quantity: 0 <New> PS roller grounding spring N2 (MSPRC0013QSZZ) → Quantity: 1

(2) Static eliminating brush <Abolishment> Static eliminating brush (PBRSR0170FCZZ) → Quantity: 0 <New> Static eliminating brush N (PBRSR0001QSZZ) → Quantity: 1

4. Action: (1) Production in both China and France: Running change

*(2) Production in China: Production in February, 1998

Production in France: Production in March, 1998

SHARP CORPORATION Printer and Scanner Division

1/2

Orange

Ref.

Model

No.

name

1. Interchangeable. 4. Not interchangeable.

2. Current type can be used in place of new type. New type cannot be used in place of current type.

3. Current type cannot be used in place of new type. New type can be used in place of current type.

Parts marked with " " is important for maintaining the safety of the set. Be sure to replace these parts with specified ones for maintaining the safety and performance of the set.

Z810

Series

Version P/G No.

15 -32 MSPRC2456FCZ1 MSPRC0013QSZZ AC

All

11 -22 PBRSR0170FCZZ PBRSR0001QSZZ AF

Current parts New parts

Parts code

5. Interchangeable if replaced with same types of related parts in use.

6. Others.

Price

rank

Parts name

PS roller grounding spring

Static eliminating brush

Effec-

tive

time

Run-

ning

change

change-

Inter-

Note

ability

2/2