Sharp NA-V135H5 User Manual

1,000-VOLT SYSTEMS

142/135 WATT

THIN FILM MODULE

Amorphous Silicon/Microcrystalline Silicon
IEC-Certified for 1,000-volt systems
For Behind-the-Fence Applications

Sharp: The first name in solar power.
The last word in solar innovation.

Oering one of the most ecient
thin film photovoltaic products ever
manufactured for multi-megawatt-scale
power production.

ENGINEERING EXCELLENCE

Tandem-junction structure (amorphous silicon/
microcrystalline silicon) captures a wider part of the
solar spectrum, converting more sunlight into electricity.

HIGH VOLTAGE ADVANTAGE

Proprietary design increases reliability by minimizing
losses caused by module output variation.

RELIABLE

Microcrystalline layer provides superior long-term
stability and higher module eciency.

warranty on power output.

25-year limited

NA-V142H5 | NA-V135H5

THIN FILM PHOTOVOLTAICS:
THE NEXT EVOLUTION
OF SOLAR TECHNOLOGY

Sharp’s thin film product pairs amorphous silicon
with a layer of microcrystalline silicon to achieve high
stability and performance. Produced with less than
one percent of the silicon used in crystalline solar
cells, thin film products oer high performance with
less semiconductor material. With a low temperature
coecient for output power, thin film generates
greater energy than its crystalline silicon counterpart
in geographic regions where temperatures are high.
In warm climates, this translates into more kilowatt­hours per kilowatt. Certified to IEC 61646, these
modules are for behind-the-fence applications.

DURABLE

Four bypass diodes ensure maximum output under
non-uniform operating conditions.

INNOVATIVE

Single-layer glass with polymeric backskin lowers
pounds per watt and transportation costs. Modules are
sized to optimize the greatest amount of power, easily
handled by one person.

1 MW thin film installation in Munich Germany, April 2009

LEADING THE fUTURE Of sOLAR

Since 1959, Sharp has led the solar electric industry
with ecient, aordable systems and powers
more homes and businesses than any other solar
manufacturer in the world. From research and
development, to system design, delivery, deployment
and a more diverse product portfolio, Sharp is ready
to partner with you to create customized solar
solutions, with an unyielding commitment to quality
control and customer service.

BE CO m E pOw ER fU L

SHARP ELECTRONICS CORPORATION

5901 Bolsa Avenue, Huntington Beach, CA 92647

www.sharpusa.com/solar

© 2009 S harp El ectro nics C orporation . All rights res erve d.

142/135 WATT

NA-V142H5 | NA-V135H5

Amorphous Silicon/Microcrystalline Silicon
IEC-Certifi ed for 1,000-volt systems (IEC 61646)

ELECTRICAL DATA

Maximum power Pmax

Open-circuit voltage Voc

Short-circuit current Isc

Voltage at maximum power Vpmax

Current at maximum power Ipmax

Module e ciency

Temperature coe cient – open circuit voltage

Temperature coe cient – short circuit current

Temperature coe cient – power

MADE I N JAPAN

The electrical data applies under standard test conditions (STC): Irradiance of 1,000 W/m2 with an AM 1.5 spectrum at a cell temperature of 25º C.
The power output is subject to a manufacturing tolerance of + 5% / - 5%
Output values are post initial Stabler-Wronski decay; actual measured initial values will be greater than nominal value (by approximately 18% for power).

η

β

α

γ

spECIfICATIONs (I)

Cell Tandem architecture of amorphous and microcrystalline silicon

Cell Circuit 45 cells in series by 6 in parallel per quadrant: 4 quadrants

Dimensions 39.7” x 55.5” x 1.8” (1009 x 1409 x 46 mm)

Weight 42 lbs

Connection type Cable with MC-3 connector

Bypass diodes 4 (one per quadrant)

Fire Rating Class C

in series

NAmEpLATE VALUEs

NA-V142H5 NA-V135H5

142 135

249 249

0.89 0.87

192 V 188 V

0.74 A 0.72 A

10.0% 9.5%

EXTERIOR DImENsIONs

-0.3%/°C

+0.07%/°C

-0.24%/°C

BACK VIEW SIDE VIEW

A

E

D

spECIfICATIONs (II)

Maximum system voltage 1,000 V

Maximum mechanical load 2,400 Pa

Series Fuse Rating 2 A

Operating temperature (cell) - 40 to +90 °C

Storage temperature - 40 to +90 °C

Storage air humidity Up to 90 %

Installation orientation Portrait

Design and spe cifi cations are sub ject to change witho ut notice.
Sharp is a registere d trademark of Sha rp Corporatio n. All other trade marks are property
of their respecti ve owners. Conta ct Sharp to obtain the late st product man uals before usin g
any Sharp device.

DC

B

F

D

39.7”/1009 mmB55.5”/1409 mmC1.8”/46 mm

3.9”/100 mmE1.2”/30.5 mmF35.4”/900 mm

E

A

D

C