Sharp NA-V135H1 User Manual
600 VOLT SYSTEMS
135 WATT
THIN FILM MODULE
Amorphous Silicon/Microcrystalline Silicon
UL listed for 600 volt systems
Sharp: The first name in solar power.
The last word in solar innovation.
Oering one of the most ecient thin film
photovoltaic products ever manufactured,
Sharp is the provider of choice for multimegawatt-scale power production.
ENGINEERING EXCELLENCE
Tandem junction structure (amorphous silicon/
microcrystalline silicon) captures a wider part of the
solar spectrum, converting more sunlight into electricity.
HIGH VOLTAGE ADVANTAGE
Increased number of parallel source circuits improves
field reliability.
RELIABILITY
Microcrystalline layer provides superior long-term
stability and higher module eciency.
NA-V135H1
THIN FILM PHOTOVOLTAICS:
THE NEXT EVOLUTION
OF SOLAR TECHNOLOGY
Sharp’s thin film product pairs amorphous silicon
with a layer of microcrystalline silicon to achieve
high stability and performance. Produced with less
than one percent of the silicon used in crystalline
solar cells, thin film oers high performance
with less semiconductor material. With a low
temperature coecient for output power, thin
film generates greater energy than its crystalline
silicon counterpart in geographic regions where
temperatures are high. In warm climates, this
translates into more kilowatt-hours per kilowatt.
DURABLE
Four bypass diodes ensure maximum output under
non-uniform operating conditions.
INNOVATIVE
Single-layer glass with polymeric backskin lowers the
pounds per watt and transportation costs. Modules are
sized to optimize the greatest amount of power, and
can easily be handled by one person.
1 MW thin film installation in Munich Germany, April 2009
LEADING THE fUTURE Of sOLAR
Since 1959, Sharp has led the solar electric industry
with ecient, aordable systems and powers
more homes and businesses than any other solar
manufacturer in the world. From research and
development, to system design, delivery, deployment
and a more diverse product portfolio, Sharp is ready
to partner with you to create customized solar
solutions, with an unyielding commitment to quality
control and customer service.
BE COm E p Ow E R fU L
SHARP ELECTRONICS CORPORATION
5901 Bolsa Avenue, Huntington Beach, CA 92647
www.sharpusa.com/solar
© 2010 Sharp E lectronics C orpor ation. A ll rights reser ved.
135 WATT
NA-V135H1
Amorphous Silicon/Microcrystalline Silicon
UL listed for 600 volt systems
ELECTRICAL DATA
Maximum power Pmax
Open-circuit voltage Voc
Short-circuit current Isc
Voltage at maximum power Vpmax
Current at maximum power Ipmax
Module e ciency
Temperature coe cient – open circuit voltage
Temperature coe cient – short circuit current
Temperature coe cient – power
MADE I N JAPAN
The electrical data applies under standard test conditions (STC): Irradiance of 1,000 W/m2 with an AM 1.5 spectrum at a cell temperature of 25º C.
The power output is subject to a manufacturing tolerance of + 10% / - 5%
Output values are post initial Stabler-Wronski decay; actual measured initial values will be greater (approximately 15% for power).
η
β
α
γ
spECIfICATIONs (I)
Cell Tandem architecture of amorphous and microcrystalline silicon
Cell Circuit 45 cells in series by 6 in parallel per quadrant: 4 quadrants
Dimensions 39.7” x 55.5” x 1.8” (1009 x 1409 x 46 mm)
Weight 42 lbs
Connection type 14 AWG Cable with MC-4 connector
Bypass diodes 4 (one per quadrant)
UL Listed UL 1703
Fire Rating Class C
in series (1080 total cells)
NAmEpLATE VALUEs
NA-V135H1
135 W
249 V
0.870 A
188 V
0.720 A
9.5%
-0.3%/°C
+0.07%/°C
-0.24%/°C
EXTERIOR DImENsIONs
BACK VIEW SIDE VIEW
A
D
E
H
G
spECIfICATIONs (II)
Maximum system voltage 600 V
Maximum mechanical load 1,600 Pa
Series Fuse Rating 2 A
Operating temperature (cell) - 40 to +90 °C
Storage temperature - 40 to +90 °C
Storage air humidity Up to 90 %
Installation orientation Portrait
Design and spe cifi cations are su bject to change witho ut notice.
Sharp is a registere d trademark of Shar p Corporation . All other tradema rks
are propert y of their respective owne rs. Contac t Sharp to obtain the latest
product manuals before using any Sh arp device.
This product qualifi es as “American” goods
under the “Buy American” clause of the ARRA.
B
DC
J
D
F
A
39.7”/1009 mmB55.5”/1409 mmC1.8”/46 mm
D
9.8”/250 mmE27.7”/704.5 mmF38.1”/969 mm
G
3.9”/100 mmH1.2”/30.5 mmJ43.3”/1100 mm
C
Loading...