Sharp NA-V128HR User Manual
1,000-VOLT SYSTEMS
128 WATT
THIN FILM MODULE
Amorphous Silicon/Microcrystalline Silicon
IEC-Certified for 1,000-volt systems
For Behind-the-Fence Applications
Sharp: The first name in solar power.
The last word in solar innovation.
Oering one of the most ecient thin film
photovoltaic products ever manufactured,
Sharp becomes the provider of choice for
multi-megawatt-scale power production.
ENGINEERING EXCELLENCE
Tandem-junction structure (amorphous silicon/
microcrystalline silicon) captures a wider part of the
solar spectrum, converting more sunlight into electricity.
HIGH VOLTAGE ADVANTAGE
Proprietary design increases reliability by minimizing
losses caused by module output variation.
RELIABILITY
Microcrystalline layer provides superior long-term
stability and higher module eciency.
NA-V128HR
THIN FILM PHOTOVOLTAICS:
THE NEXT EVOLUTION
OF SOLAR TECHNOLOGY
Sharp’s thin film product pairs amorphous silicon
with a layer of microcrystalline silicon to achieve high
stability and performance. Produced with less than
one percent of the silicon used in crystalline solar
cells, thin film products oer high performance with
less semiconductor material. With a low temperature
coecient for output power, thin film generates
greater energy than its crystalline silicon counterpart
in geographic regions where temperatures are high.
In warm climates, this translates into more kilowatthours per kilowatt. Certified to IEC 61646, these
modules are not UL-listed and are exclusively for
behind-the-fence applications.
DURABLE
Four bypass diodes ensure maximum output under
non-uniform operating conditions.
INNOVATIVE
Single-layer glass with polymeric backskin lowers
pounds per watt and transportation costs. Modules are
sized to optimize the greatest amount of power, easily
handled by one person.
The Dayton Power & Light Company, 1.1 MWdc Thin Film
LEADING THE fUTURE Of sOLAR
Since 1959, Sharp has led the solar electric industry
with ecient, aordable systems and powers
more homes and businesses than any other solar
manufacturer in the world. From research and
development, to system design, delivery, deployment
and a more diverse product portfolio, Sharp is
ready to create your customized solar solution, with
an unyielding commitment to quality control and
customer service.
BE CO m E pOw ER fU L
SHARP ELECTRONICS CORPORATION
5901 Bolsa Avenue, Huntington Beach, CA 92647
www.sharpusa.com/solar
© 2010 Sharp E lectr onic s Corporatio n. All r ights re served.
128 WATT
NA-V128HR
Amorphous Silicon/Microcrystalline Silicon
IEC-Certifi ed for 1,000-volt systems (IEC 61646)
ELECTRICAL DATA
Maximum power Pmax
Open-circuit voltage Voc
Short-circuit current Isc
Voltage at maximum power Vpmax
Current at maximum power Ipmax
Module e ciency
Temperature coe cient – open circuit voltage
Temperature coe cient – short circuit current
Temperature coe cient – power
MADE I N JAPAN
The electrical data applies under standard test conditions (STC): Irradiance of 1,000 W/m2 with an AM 1.5 spectrum at a cell temperature of 25º C.
The power output is subject to a manufacturing tolerance of + 10% / - 5%
Output values are post initial Stabler-Wronski decay; actual measured initial values will be greater (approximately 15% for power).
Illumination of 1 kW/m
2
(1 sun) at spectral distribution of AM 1.5 (ASTM E892 global spectral irradiance)
η
β
α
γ
spECIfICATIONs (I)
Cell Tandem architecture of amorphous and microcrystalline silicon
Cell Circuit 45 cells in series by 6 in parallel per quadrant: 4 quadrants
Dimensions 39.7” x 55.5” x 1.8” (1009 x 1409 x 46 mm)
Weight 40 lbs
Connection type Project Specifi c
Bypass diodes 4 (one per quadrant)
Fire Rating Class C
in series
NAmEpLATE VALUEs
NA-V128HR
128 W
238 V
0.846 A
186 V
0.688 A
9.0%
-0.3%/°C
+0.07%/°C
-0.24%/°C
EXTERIOR DImENsIONs
BACK VIEW SIDE VIEW
A
E
D
spECIfICATIONs (II)
Maximum system voltage 1,000 V
Maximum mechanical load 2,400 Pa
Series Fuse Rating 2 A
Operating temperature (cell) - 40 to +90 °C
Storage temperature - 40 to +90 °C
Storage air humidity Up to 90 %
Installation orientation Portrait
Design and spe cifi cations are subject to chang e without notice.
Sharp is a registere d trademark of Sha rp Corporatio n. All other trade marks are property
of their respecti ve owners. Conta ct Sharp to obtain the late st product man uals before usin g
any Sharp device.
DC
B
F
D
39.7”/1009 mmB55.5”/1409 mmC1.8”/46 mm
3.9”/100 mmE1.2”/30.5 mmF35.4”/900 mm
E
A
D
C
Loading...