Sharp NA-V128H1 User Manual
600-VOLT SYSTEMS
128/121/115 WATT
THIN FILM MODULE
Amorphous Silicon/Microcrystalline Silicon
UL-Listed for 600-volt systems
Sharp: The first name in solar power.
The last word in solar innovation.
Oering one of the most ecient thin film
photovoltaic products ever manufactured,
Sharp becomes the provider of choice for
multi-megawatt-scale power production.
ENGINEERING EXCELLENCE
Tandem-junction structure (amorphous silicon/
microcrystalline silicon) captures a wider part of the
solar spectrum, converting more sunlight into electricity.
HIGH VOLTAGE ADVANTAGE
Proprietary design increases reliability by minimizing
losses caused by module output variation.
RELIABILITY
Microcrystalline layer provides superior long-term
stability and higher module eciency.
NA-V128H1 | NA-V121H1 | NA-V115H1
THIN FILM PHOTOVOLTAICS:
THE NEXT EVOLUTION
OF SOLAR TECHNOLOGY
Sharp’s thin film product pairs amorphous silicon
with a layer of microcrystalline silicon to achieve
high stability and performance. Produced with
less than one percent of the silicon used in
crystalline solar cells, thin film products oer high
performance with less semiconductor material.
With a low temperature coecient for output
power, thin film generates greater energy than
its crystalline silicon counterpart in geographic
regions where temperatures are high. In warm
climates, this translates into more kilowatt-hours
per kilowatt.
DURABLE
Four bypass diodes ensure maximum output under
non-uniform operating conditions.
INNOVATIVE
Single-layer glass with polymeric backskin lowers
pounds per watt and transportation costs. Modules are
sized to optimize the greatest amount of power, easily
handled by one person.
340 kW, German factory rooftop
LEADING THE fUTURE Of sOLAR
Since 1959, Sharp has led the solar electric industry
with ecient, aordable systems and powers
more homes and businesses than any other solar
manufacturer in the world. From research and
development, to system design, delivery, deployment
and a more diverse product portfolio, Sharp is ready
to partner with you to create customized solar
solutions, with an unyielding commitment to quality
control and customer service.
BE CO m E pOw ER fU L
SHARP ELECTRONICS CORPORATION
5901 Bolsa Avenue, Huntington Beach, CA 92647
www.sharpusa.com/solar
© 2009 S harp El ectro nics C orporation . All rights res erve d.
128/121/115 WATT
NA-V128H1 | NA-V121H1 | NA-V115H1
Amorphous Silicon/Microcrystalline Silicon
UL-Listed for 600-volt systems
ELECTRICAL DATA
Maximum power Pmax
Open-circuit voltage Voc
Short-circuit current Isc
Voltage at maximum power Vpmax
Current at maximum power Ipmax
Module e ciency
Temperature coe cient – open circuit voltage
Temperature coe cient – short circuit current
Temperature coe cient – power
MADE I N JAPAN
The electrical data applies under standard test conditions (STC): Irradiance of 1,000 W/m2 with an AM 1.5 spectrum at a cell temperature of 25º C.
The power output is subject to a manufacturing tolerance of + 10% / - 5%
Output values are post initial Stabler-Wronski decay; actual measured initial values will be greater (approximately 15% for power).
η
β
α
γ
spECIfICATIONs (I)
Cell Tandem architecture of amorphous and microcrystalline silicon
Cell Circuit 45 cells in series by 6 in parallel per quadrant: 4 quadrants
Dimensions 39.7” x 55.5” x 1.8” (1009 x 1409 x 46 mm)
Weight 42 lbs
Connection type Cable with MC-4 connector
Bypass diodes 4 (one per quadrant)
Fire Rating Class C
in series (1080 total cells)
NAmEpLATE VALUEs
NA-V128H1 NA-V121H1 NA-V115H1
128 121 115
238 238 238
0.846 0.830 0.810
186 V 180 V 174 V
0.688 A 0.673 A 0.661 A
9.0% 8.5% 8.1%
-0.3%/°C
+0.07%/°C
-0.24%/°C
EXTERIOR DImENsIONs
BACK VIEW SIDE VIEW
A
D
E
H
G
spECIfICATIONs (II)
Maximum system voltage 600 V
Maximum mechanical load 1,600 Pa
Series Fuse Rating 2 A
Operating temperature (cell) - 40 to +90 °C
Storage temperature - 40 to +90 °C
Storage air humidity Up to 90 %
Installation orientation Portrait
Design and spe cifi cation s are subject to chang e without notice.
Sharp is a registere d trademark of Sha rp Corporatio n. All other trade marks are property
of their respecti ve owners. Conta ct Sharp to obtain the late st product man uals before usin g
any Sharp device.
DC
B
J
D
F
A
39.7”/1009 mmB55.5”/1409 mmC1.8”/46 mm
D
9.8”/250 mmE27.7”/704.5 mmF38.1”/969 mm
G
3.9”/100 mmH1.2”/30.5 mmJ35.4”/900 mm
C
Loading...