Sharp NA-F090, NA-F095 DATASHEET

Say yes to solar power!
Because it protects the climate.
NA Series (1.05 m
2
, 1,000 V)
95 W | 90 W
Microamorphous silicon thin-film photovoltaic modules
photovoltaic pioneer
As a solar specialist with
50 years' experience in
photovoltaics (PV), Sharp
makes significant contri-
butions to groundbreaking
progress in solar technology.
The NA series of thin-film
photovoltaic modules con-
sists of an amorphous and a
microcrystalline silicon layer.
This microamorphous tandem
structure not only absorbs visible light but
also the invisible portion of the solar spec-
trum. This makes especially efficient use of
solar energy.
All Sharp NA series modules offer system
integration which is optimal both techni-
cally and economically, and are suitable
for installations in on and off-grid PV
s y s t e m s .
Brief details for the installer

Tandem structure consisting of an amorphous
and a microcrystalline silicon layer

96 cells

2,400 N/m
2
mechanical load-bearing capacity (245 kg/m
2
)

1,000 V DC maximum system voltage

IEC/EN 61646, IEC/EN 61730, Class II (VDE: 40023069)
Product features
Tandem structure with an amorphous and a microcrystalline silicon
layer offering a stabilised module efficiency of up to 9.0%.
The black appearance of the module creates a harmonious visual
impression.
Higher energy yields per watt, at both high temperatures and with
diffuse light.
Use of tempered white glass, EVA plastic, and weather protection
film, as well as an anodised aluminium frame with drainage holes
for long-term use.
Output: connection cable with waterproof plug connector.
Quality from Sharp
Benchmarks are set by the quality standards of Sharp Solar.
Con tinual checks guarantee a consistently high level of quality.
Every module undergoes visual, mechanical, and electrical
inspection. This is recognisable by means of the original Sharp
label, the serial number, and the Sharp guarantee:
5 year product guarantee
10 year performance guarantee for a power output of 90%
25 year performance guarantee for a power output of 80%
The detailed guarantee conditions and additional information can
be found at www.sharp.eu.
End users are required to register the modules with Sharp in order
for the product and service warranty to be effective.
The registration documents will be handed out by the installation
staff or supplied directly by Sharp.
Sharp Energy Solution Europe
a division of Sharp Electronics (Europe) GmbH
Sonninstrasse 3, 20097 Hamburg, Germany
Tel: + 49 (0) 40 / 23 76 - 0 · Fax: + 49 (0) 40 / 23 76 - 21 93
www.sharp.eu
Local responsibility:
Austria
SolarInfo.at@sharp.eu
Benelux
SolarInfo.seb@sharp.eu
Central & Eastern Europe
SolarInfo.scee@sharp.eu
Denmark
SolarInfo.dk@sharp.eu
France
SolarInfo.fr@sharp.eu
Germany
SolarInfo.de@sharp.eu
Scandinavia
SolarInfo.sen@sharp.eu
Spain & Portugal
SolarInfo.es@sharp.eu
Switzerland
SolarInfo.ch@sharp.eu
United Kingdom
SolarInfo.uk@sharp.eu
120
110
100
90
80
70
60
50
40
30
20
10
0
1,129
506
934
55
Frame
Solar cell
Junction box
Screw
Plug connectorJunction box
238 ± 20
38
+ 15
10
,
Open-circuit voltage I
sc
, V
oc
, P
max
(%)
I
sc
V
oc
P
max
120
110
100
90
80
70
60
50
40
30
20
10
1,129
506
934
55
Current (A)
Power (W)
Frame
Solar cell
Junction box
38
+ 15
10
sc
, V
oc
, P
max
(%)
I
sc
V
oc
P
max
2.5
2.0
1.5
1.0
0.5
0.0
100
90
80
70
60
50
40
30
20
10
10 20 30 40 50 60 70
600 (W/m
2
)
800 (W/m
2
)
1,000 (W/m
2
)
400 (W/m
2
)
200 (W/m
2
)
1,129
506
934
55
Frame
Solar cell
Junction box
Screw
Plug connectorJunction box
238 ± 20
46
38
+ 15
10
100
1,129
506
55
Frame
Solar cell
Junction box
Screw
Plug connectorJunction box
38
+ 15
10
Glass
100
Side seal
Solar cell
Back cover
Plastic
Frame
55
Solar cell
Junction box
Screw
Plug connectorJunction box
38
+ 15
10
Glass
Side seal
Solar cell
Back cover
Plastic
Frame
1,129
506
900 ±30
900 ±30
100
55
55
Frame
Solar cell
Junction box
Screw
Plug connectorJunction box
38
+ 15
10
Glass
100
Side seal
Solar cell
Back cover
Plastic
Frame
Mechanical data
Cell
Tandem cell of amorphous (-Si) and
microcrystalline (c-Si) silicon
Connection 2 sub-modules in parallel
Dimensions 1,129 × 934 × 46 mm (1.05 m
2
)
Weight 18 kg
Connection type Cable with plug connector (MC-3)
Bypass diodes 1
Electrical data
Initial values Nominal values
NA-F095 (B5) NA-F090 (B5) NA-F095 (B5) NA-F090 (B5)
Maximum power P
max
111.8 W
p
105.9 W
p
95 W
p
90 W
p
Open-circuit voltage V
oc
64.8 63.8 63.8 62.8 V
Short-circuit current I
sc
2.43 2.42 2.37 2.34 A
Voltage at point of maximum power V
mpp
52.0 50.5 47. 5 47.7 V
Current at point of maximum power I
mpp
2.15 2.1 0 2.00 1.89 A
Module efficiency
 
m
9.0 8.5 %
NOCT 44 44 °C
Temperature coefficient – open-circuit voltage
 V
oc
– 0.30 – 0.30 – 0.30 – 0.30 % / °C
Temperature coefficient – short-circuit current
 l
sc
+0.070 +0.070 +0.070 +0.070 % / °C
Temperature coefficient – power
 P
max
– 0.24 – 0.24 – 0.24 – 0.24 % / °C
The electrical data applies under standard test conditions (STCs): irradiation 1,000 W/m
2
with light spectrum AM 1.5 and a cell temperature of 25 °C. The rated electrical characteristics are subject to a manufacturing
tolerance of ± 10%. NOCT conditions: irradiation of 800 W/m
2
, ambient temperature of 20 °C and wind speed of 1 m/sec.
Applications
On-grid PV systems
Please read our detailed installation
manual carefully before installing the
photovoltaic modules. The instructions
in the installation manual must always
be observed (e. g. max. of 12 modules
in series, minus pole must be grounded,
protection with blocking diodes/fuses).
A generator box with approved
blocking diodes is available from
your Sharp dealer.
Off-grid PV systems
On-roof PV systems
Ground-mounted PV systems
Note
Technical data is subject to change without prior
notice. Before using Sharp products, please request
the latest data sheets from Sharp. Sharp accepts
no responsibility for damage to devices which have
been equipped with Sharp products on the basis of
unverified information.
The specifications may deviate slightly and are not
guaranteed. Installation and operating instructions
are to be found in the corresponding handbooks, or
can be downloaded from www.sharp.eu.
This module should not be directly connected to
a load.
Limit values
Storage air humidity (relative) up to 90 %
Operating temperature (cell) – 40 to + 90 °C
Storage temperature – 40 to + 90 °C
Maximum system voltage 1,000 V DC
Maximum mechanical load 2,400 N/m
2
Over-current protection 4 A
The reference image on the front page shows a 400 kWp system of Prosolia in Granada, Spain.
Characteristic curves NA-F090 (B5)
Characteristic curves: open-circuit voltage /
short-circuit current vs. irradiation
(cell temperature: 25 °C)
Irradiance (W/m
2
)
Characteristic curves: current / power vs. voltage
(cell temperature: 25 °C)
Exterior dimensions
Cross-section A-A’ Cross-section B-B’
Connection cable
Sola rNA_105 _2E0210
Voltage (V) Current vs. voltage
Power vs. voltage
NA-Serie (1,05 m
2
, 1.000 V)
95 W | 90 W
Mikroamorphe Silizium-Dünnschicht-Photovoltaikmodule
Solarstrom – ja bitte!
Weil er das Klima schützt.
Innovationen vom
Photovoltaikpionier
Als Solarspezialist mit 50
Jahren Erfahrung in der
Photovoltaik (PV) trägt
Sharp entscheidend zu weg-
weisenden Fortschritten in
der Solartechnologie bei.
Die Dünnschicht-Photovol-
taikmodule der NA-Serie be-
stehen aus einer amorphen
und einer mikrokristallinen
Siliziumschicht. Diese mikro -
amorphe Tandemstruktur absorbiert
nicht nur die sichtbaren, sondern auch
die nicht sichtbaren Anteile des Sonnen-
spektrums. Dies führt zu einer besonders
effektiven Nutzung der Sonnenenergie.
Sämtliche Modultypen der Sharp NA-Serie
bieten technisch wie wirtschaftlich eine
optimale Systemintegration und eignen
sich für die Montage in netzgekoppelten
und netzfernen PV-Anlagen.
Kurzinformationen für den Installateur

Tandemstruktur aus einer amorphen und einer
mikrokristallinen Siliziumschicht

96 Zellen
2.400 N/m
2
mechanische Belastbarkeit (245 kg/m
2
)
1.000 V DC maximale Systemspannung
IEC/EN 61646, IEC/EN 61730, Schutzklasse II (VDE: 40023069)
Produktmerkmale
Tandemstruktur aus einer amorphen und einer mikrokristallinen
Siliziumschicht mit einem stabilisierten Modulwirkungsgrad von
bis zu 9,0 %.
Die schwarze Moduloptik schafft ein harmonisches
Erscheinungsbild.
Höhere Energieerträge pro Watt sowohl bei hohen Temperaturen
als auch bei diffusem Licht.
Verwendung von vergütetem Weißglas, EVA-
Kunststoff und
Witterungsschutz
folie sowie eines eloxierten Aluminiumrahmens
mit Entwässerungsbohrungen für den Langzeiteinsatz.
Ausgang: Anschlusskabel mit wassergeschütztem Steckanschluss.
Qualität von Sharp
Der Qualitätsanspruch von Sharp Solar setzt Maßstäbe.
Ständige Kontrollen garantieren eine gleichbleibend hohe Qualität.
Jedes Modul wird optisch, mechanisch und elektrisch geprüft.
Sie erkennen es am Original Sharp Label, der Seriennummer und
der Sharp Garantie:
5 Jahre Produktgarantie
10 Jahre Leistungsgarantie auf eine Leistungsabgabe von 90 %
25 Jahre Leistungsgarantie auf eine Leistungsabgabe von 80 %
Die detaillierten Garantiebedingungen sowie weiterführende
Informationen erhalten Sie unter www.sharp.eu.
Zur Gewährung der Produkt- und Leistungsgarantie müssen die
Module durch den Endkunden bei Sharp registriert werden.
Die Registrierungsunterlagen werden vom Installateur oder direkt
von Sharp ausgehändigt.
Deutschland: INFO-HOTLINE Mo.–Fr. von 8–20 Uhr 01805 / 01 52 22
|
INFO-FA X 01805 / 38 32 38 (0,14 € / Min. aus dem deutschen Festnetz, max. 0,42 € / Min. aus dem deutschen Mobilfunknetz)
Österreich: INFO-HOTLINE Mo.–Fr. von 8 –20 Uhr 0820 / 40 06 40 (0,145 € / Min.)
|
INFO-FA X 0 8 2 0 / 2 4 6 2 5 9 (0,145 € / Min. aus dem Festnetz Österreichs, Anrufe aus dem Mobilfunknetz ggf. teurer)
Loading...
+ 5 hidden pages