Sharp LC-80LE646S, LC-80LE646E, LC-80LE645RU, LC-80LE645E User Manual

MODEL

LC-80LE645E LC-80LE645RU LC-80LE646E LC-80LE646S

OPERATION MANUAL

LCD COLOUR TELEVISION

CE Statement:

Hereby, SHARP Electronics (Europe) GmbH declares that the wireless LAN USB adapter (WN8522D 7-JU) is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. The declaration of conformity may be consulted at: http://www.sharp.de/doc/ WN8522D_7.pdf.

NOTE

The wireless LAN USB adapter is designed for indoor use only.

ASA

Introduction

Dear SHARP customer

Thank you for your purchase of the SHARP LCD colour TV product. To ensure safety and many years of trouble-free operation of your product, please read

Important safety precautions carefully before using this product.

[ ENGLISH ]

Introduction ............................................................. 1

Dear SHARP customer ....................................... 1

Contents ............................................................. 1

Important safety precautions ............................. 2

Supplied accessories ......................................... 4

Preparation ............................................................. 5

Attaching the stand unit ..................................... 5

Using the remote control unit ............................. 6

Part names and functions ...................................... 7

TV (front/side view) ............................................. 7

TV (rear view) ...................................................... 7

Remote control unit ............................................ 8

Quick guide ............................................................. 9

Operation overview ............................................ 9

Inserting the CA card into the CI module ......... 11

Using the HOME screen ................................... 12

Initial auto installation .......................................... 14

Initial auto installation ....................................... 14

Watching TV .......................................................... 18

Daily operation .................................................18

EPG .................................................................. 20

Teletext ............................................................. 22

Connecting external devices ............................... 23

Introduction to connections ............................. 23

Video connections ............................................ 24

Audio connections ........................................... 26

AQUOS LINK ......................................................... 27

Controlling HDMI devices using AQUOS LINK

AQUOS LINK connection ................................. 28

AQUOS LINK setup .......................................... 29

Operating an AQUOS LINK device .................. 29

... 27

Basic adjustment .................................................. 31

Picture settings................................................. 31

Audio settings .................................................. 33

Power save settings ......................................... 34

View settings .................................................... 35

TV start-up time setting .................................... 38

Individual setting — PIN ................................... 38

Individual setting — Clock ............................... 38

Individual setting — Language ......................... 39

Useful viewing functions ...................................... 40

Optional features settings ................................ 40

Additional features ...........................................43

Other useful features ........................................... 44

Time shift + ....................................................... 44

How to operate Time shift + ............................. 45

USB media/Home network .............................. 48

USB device compatibility ................................. 51

Home network server compatibility ................. 51

Selecting the picture size for video mode ........ 51

Connecting a PC ................................................... 52

Connecting a PC .............................................. 52

Displaying a PC image on the TV ..................... 52

PC control of the TV ......................................... 55

Network setup ...................................................... 57

Connecting to the network ............................... 57

Net TV .................................................................... 59

What is Net TV?................................................ 59

Operations in Net TV ........................................ 59

Appendix ............................................................... 61

Troubleshooting ................................................ 61

Updating your TV via DVB-T/T2*1/C/S*2/S2*2 ... 62

Getting update information .............................. 62

Information on the software licence for this

product ........................................................... 63

Updating your TV via USB/network ................. 63

Trademarks ....................................................... 64

Software licences for Net TV ............................ 65

Disclaimers for services using the Internet ...... 65

Specifications ................................................... 66

Specifications (Wireless LAN USB adapter) ..... 67

Environmental specifications ........................... 68

Mounting the TV on a wall ................................ 68

Wall mount kit specifications............................ 68

Dimensional drawings ...................................... 70

EU Energy Label for Televisions ....................... 71

I 646 series only

J 645 series only

NOTE

• The illustrations and the OSD in this operation manual are for explanation purposes and may vary slightly from the actual operations.

Introduction

Important safety precautions

• Cleaning—Unplug the AC cord from the AC outlet before cleaning the product. Use a damp cloth to clean the product. Do not use liquid cleaners or aerosol cleaners.

• Use a soft damp cloth to gently wipe the panel when it is dirty. To protect the panel, do not use a chemical cloth to clean it. Chemicals may cause damage or cracks in the cabinet of the TV.

• Water and moisture—Do not use the product near water, such as bathtub, washbasin, kitchen sink, laundry tub, swimming pool and in a wet basement.

• Do not place vases or any other water-filled containers on this product. The water may spill onto the product causing fire or electric shock.

• Stand—Do not place the product on an unstable cart, stand, tripod or table. Doing so can cause the product to fall, resulting in serious personal injuries as well as damage to the product. Use only a cart, stand, tripod, bracket or table recommended by the manufacturer or sold with the product. When mounting the product on a wall, be sure to follow the manufacturer’s instructions. Use only the mounting hardware recommended by the manufacturer.

• When relocating the product placed on a cart, it must be moved with utmost care. Sudden stops, excessive force and uneven floor surface can cause the product to fall from the cart.

• Ventilation—The vents and other openings in the cabinet are designed for ventilation. Do not cover or block these vents and openings since insufficient ventilation can cause overheating and/or shorten the life of the product. Do not place the product on a bed, sofa, rug or other similar surface, since they can block ventilation openings. This product is not designed for built-in installation; do not place the product in an enclosed place such as a bookcase or rack, unless proper ventilation is provided or the manufacturer’s instructions are followed.

• The LCD panel used in this product is made of glass. Therefore, it can break when the product is dropped or impact applied. If the LCD panel is broken, be careful not to be injured by broken glass.

• Heat sources—Keep the product away from heat sources such as radiators, heaters, stoves and other heat-generating products (including amplifiers).

• To prevent fire, never place any type of candle or naked flames on the top or near the TV set.

• To prevent fire or shock hazard, do not place the AC cord under the TV set or other heavy items.

• Headphones—Do not set the volume at a high level. Hearing experts advise against extended listening at high volume levels.

• Do not display a still picture for a long time, as this could cause an afterimage to remain.

• There is power consumption always if main plug is connected.

• Servicing—Do not attempt to service the product yourself. Removing covers can expose you to high voltage and other dangerous conditions. Request a qualified person to perform servicing.

The LCD panel is a very high technology product, giving you fine picture details. Due to the very large number of pixels, occasionally a few non-active pixels may appear on the screen as a fixed point of blue, green or red. This is within product specifications and does not constitute a fault.

Precautions when transporting the TV

When transporting the TV, never carry it by putting pressure onto the display. Be sure to always carry the TV by two people holding it with two hands—one hand on each side of the TV.

Caring for the cabinet

• Use a soft cloth (cotton, flannel, etc.) and gently wipe the surface of the cabinet.

• Using a chemical cloth (wet/dry sheet type cloth, etc.) may deform the components of the main unit cabinet or cause cracking.

• Wiping with a hard cloth or using strong force may scratch the surface of the cabinet.

• If the cabinet is very dirty, wipe with a soft cloth (cotton, flannel, etc.) soaked in neutral detergent diluted with water and thoroughly wrung out, and then wipe with a soft dry cloth.

• Avoid using benzene, thinner, and other solvents, as these may deform the cabinet and cause the paint to peel off.

• Do not apply insecticides or other volatile liquids. Also, do not allow the cabinet to remain in contact with rubber or vinyl products for a long period of time. Plasticizers inside the plastic may cause the cabinet to deform and cause the paint to peel off.

Introduction

Caring for the front panel

• Gently wipe the surface of the front panel with a soft cloth (cotton, flannel, etc.). To protect the front panel, do not use a dirty cloth, liquid cleaners, or a chemical cloth (wet/dry sheet type cloth, etc.). This may damage the surface of the front panel.

• Wiping with a hard cloth or using strong force may scratch the surface of the front panel.

• Use a soft damp cloth to gently wipe the front panel when it is really dirty (It may scratch the surface of the front panel when wiped strongly).

• If the front panel is dusty, use an anti-static brush, which is commercially available, to clean it.

WARNING

To prevent the spread of fire, keep candles or other open flames away from this product at all times.

Introduction

Supplied accessories

Remote control unit ( x 1) LR03 (“AAA” size alkaline) battery ( x 2)

Pages 6 and 8 Page 6

AC cord ( x 1) Stand unit ( x 1)

Page 9 Page 5

Wireless LAN USB adapter

(WN8522D 7-JU) ( x 1)

Initial setup guide (printed document)

Page 58

USB memory (operation manual)

Important safety precautions (printed document)

Preparation

Attaching the stand unit

•

Before attaching (or detaching) the stand, unplug the AC cord.

• Before performing work, spread cushioning over the surface on which you will be laying the TV. This will prevent it from being damaged.

CAUTION

• Attach the stand in the correct direction.

•

Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.

•

After attaching the stand to the TV, do not hold the stand when you put up, set up, move or lay down the TV.

• Do not remove the stand from the TV unless using a wall mount bracket to mount it.

1 Confirm that there are twelve screws (eight long

screws and four short screws) supplied with the stand unit.

Set the supporting post for the stand unit

onto the polystyrene foam.

Attach the stand base to the supporting post.

Insert and tighten the eight screws into the eight holes on the bottom of the stand base.

• Hold the stand unit securely with one hand, and then tighten the screws.

Stand base Long screws

3 Insert the stand into the openings on the bottom

of the TV (hold the stand so it will not drop from the edge of the base area).

• Make sure that the stand is firmly inserted into the TV. Improper installation may result in tilting of the TV set.

• Instead of using a soft cushion, the cardboard box that the TV is packed in can be assembled and used as a work table (refer to the instructions on the box to assemble the work table).

Soft cushion

4 Insert and tighten the four screws into the four

holes on the rear of the TV.

Short screws

NOTE

• To detach the stand unit, perform the steps in reverse order.

• A screwdriver is not supplied with this product.

• In the installation procedure, be careful not to catch your fingers between the TV set and the floor.

Supporting post

TV front

Preparation

Using the remote control unit

Inserting the batteries

Before using the TV for the first time, insert the two supplied LR03 (“AAA” size alkaline) batteries. When the batteries become depleted and the remote control unit fails to operate, replace the batteries with new LR03 (“AAA” size alkaline) batteries.

1 Open the battery cover.

2 Insert the two supplied LR03 (“AAA” size alkaline)

batteries.

• Place batteries with their terminals corresponding to the (e) and (f) indications in the battery compartment.

3 Close the battery cover.

CAUTION

Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below.

• Do not mix batteries of different types. Different types of batteries have different characteristics.

• Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or cause chemical leakage in old batteries.

• Remove batteries as soon as they have worn out. Chemicals that leak from batteries can cause a rash. If you find any chemical leakage, wipe thoroughly with a cloth.

• The batteries supplied with this product may have a shorter life expectancy due to storage conditions.

• If you will not be using the remote control unit for an extended period of time, remove the batteries from it.

• When replacing the batteries, use alkaline batteries instead of zinc-carbon ones.

Note on disposing batteries

The batteries provided contain no harmful materials such as cadmium, lead or mercury. Regulations concerning used batteries stipulate that batteries may no longer be thrown out with the household rubbish. Deposit any used batteries free of charge into the designated collection containers set up at commercial businesses.

Angle of the remote control unit

Use the remote control unit by pointing it towards the remote control sensor. Objects between the remote control unit and sensor may prevent proper operation.

5 m

Remote control sensor

Cautions regarding the remote control unit

• Do not expose the remote control unit to shock. In addition, do not expose the remote control unit to liquids, and do not place in an area with high humidity.

• Do not install or place the remote control unit under direct sunlight. The heat may cause deformation of the unit.

• The remote control unit may not work properly if the remote control sensor of the TV is under direct sunlight or strong lighting. In such cases, change the angle of the lighting or the TV, or operate the remote control unit closer to the remote control sensor.

Part names and functions

TV (front/side view)

Illumination LED

OPC sensor (Page 31)

Remote control sensor (Page 6)

TV (rear view)

a (Power)

MENU (Menu)

b (Input source)

:r/s

(Programme [Channel])

i+/- (Volume)

TV (rear view) — continued

AC INPUT terminal

RS-232C terminal

PC terminal

EXT 1 (RGB) terminal

EXT 2 (VIDEO/AUDIO (L/R)) terminal

EXT 3 (Component/ AUDIO (L/R)) terminal

SD CARD (VIDEO STORE) slot

OUTPUT (Headphones/ AUDIO (L/R)) terminal*

USB 1 port

HDMI 1 (HDMI/ARC) terminal

HDMI 2 (HDMI) terminal

HDMI 3 (HDMI) terminal

HDMI 4 (HDMI) terminal

C.I. (COMMON INTERFACE) slot

USB 3 (WIRELESS LAN) port

USB 2 (HDD) port

ETHERNET (10/100) terminal

Satellite antenna terminal

(645 series only)

I The HDMI 2 and PC terminals can both use the same audio input terminal (HDMI 2/PC

AUDIO (L/R)). However, the proper item must be selected in the “Audio select” menu (refer to page 41 for details).

HDMI 2/PC AUDIO (L/R)

jack*

DIGITAL AUDIO OUTPUT terminal

Antenna terminal

J When the headphone is connected to the OUTPUT terminal, the audio can be output

from the speakers (Page 42).

WARNING

• Excessive sound pressure from earphones and headphones can cause hearing loss.

• Do not set the volume at a high level. Hearing experts advise against extended listening at high volume levels.

Important information:

Satellite services are only available for the 645 model series.

Part names and functions

Remote control unit

13 114 2

7 8

1 >a (Standby/On) (Page 18)

2 ATV

Access conventional analogue TV mode.

DTV

Access digital TV mode.

SAT

Access satellite mode.

RADIO

DTV/SAT: Switch between radio and data mode.

• When only data broadcasting (no radio broadcasting) is transmitted by DVB, the radio broadcasting will be skipped.

3 EXT MEDIA buttons

EXT MEDIA buttons are used for AQUOS LINK functions and Time shift functions, etc.

• AQUOS LINK (Pages 27_30): Interactively operate compatible system devices using a single remote control unit.

• Time shift + (Pages 44_47): Temporarily record a programme you are watching.

4 Numeric buttons 0_9

Set the channel. Enter desired numbers. Set the page in teletext mode.

• When the five Nordic countries (Sweden, Norway, Finland, Denmark or Iceland) are selected in the country setting from initial auto installation (Page 14), DTV services are four digits. When another country is selected, DTV services are three digits.

5 A (Flashback)

Return to the previously selected channel or external input.

6 7 (Sound mode) (Page 19)

Select a sound multiplex mode.

f (Wide mode) (Pages 40, 51 and 52)

Select a wide mode.

7 e (Mute)

TV sound on/off.

8 i+/- (Volume)

Increase/decrease TV volume.

9 D (HOME)

Display the “HOME” screen for enjoying Internet connection and Home network functions, as well as performing settings for the TV.

0 None

This button does not work on this model.

Q a/b/c/d (Cursor)

Select a desired item.

;

Execute a command. ATV/DTV/SAT: Display “CH list” when no other “Menu” screen is running.

W >

ATV/DTV/SAT: Exit the “Menu” screen. AQUOS NET+: Return to the start page.

E CONTROL (Pages 45, 47, 50 and 59)

Display a panel to operate some functions on the screen.

Rp (Display information) (Page 19)

Display the station information (channel number, signal, etc.) on the screen.

P. INFO

Display programme information transmitted through digital video broadcasting (DTV/SAT only).

T b (INPUT) (Page 18)

Select an input source.

Y # (Page 31)

Select audio/video settings.

ECO (Standard/Advanced/Off) (Page 34)

Select “Energy save” setting.

m (T

eletext) (Page 22)

ATV: Display analogue teletext. DTV/SAT: Select MHEG-5 or teletext for DTV/SAT.

I :r/s

ATV/DTV/SAT: Select the TV channel. AQUOS NET+: Scrolls pages up/down.

O EPG (Pages 20_22)

DTV/SAT: Display the EPG screen.

P6 (Return)

ATV/DTV/SAT: Return to the previous screen. AQUOS NET+: Return to the previous page (This may not function for some services).

A Buttons for useful operations

[ (Subtitle) (Pages 22 and 39)

Switch subtitle languages on/off.

k (Reveal hidden teletext) (Page 22) 1 (Subpage) (Page 22) 3 (Freeze/Hold) (Page 22)

Freeze a moving image on the screen. Teletext: Stop updating teletext pages automatically or release the hold mode.

SR/G/Y/B (Colour) buttons

The coloured buttons are correspondingly used to select the coloured items on the screen (e.g., EPG, MHEG-5, teletext).

Important information:

Satellite services are only available for the 645 model series.

Quick guide

Operation overview

Follow the steps below one by one when using the TV. Some steps may not be necessary depending on your TV installation and connection.

1. Preparation — Connecting the TV

Plug the standard DIN45325 plug (IEC 169-2)

• Place the TV close to the AC outlet, and keep the power plug within reach.

• Product shape varies in some countries.



75 q coaxial cable. Connect the satellite antenna cable.



Insert a CA card into the CI slot to watch



scrambled broadcasts (Page 11). Connect the AC cord to the TV.



Plug in the AC cord.



Bundle the cables with the tie.



2. Preparation — Setting the TV

Press a on the TV (Page 18).



Run the initial auto installation (Page 14).



w Language setting w Home/Store setting w Country setting w PIN setting w Channel search setting

• Digital search

− Terrestrial

− Cable

• Analogue search

• Satellite search

Start searching channels

*Important information:

Satellite services are only available for the 645 model series.

Congratulations!



Now you can watch TV.

• If necessary, adjust the antenna to attain maximum signal reception (Page 17).

Quick guide

3. Daily operation

1 Turn on/off the TV

(Page 18)

• You can turn on/off the power using both the remote control and the TV.

2 Switch between digital, satellite and

analogue broadcast

(Page 18)

3 Change channels

(Page 18)

• You can also select a channel from “HOME” > “CH list”.

4 Select a programme using EPG

(Pages 20_22)

4. Advanced features

1 Use Time shift + function

(Pages 45_47)

5. Enjoy additional features

1 Connect external devices

Connection overview (Pages 23_28)

• Be sure to turn off the TV and any devices before making any connections.

Switch input sources (Page 18)

2 Enjoy photos, music and video stored

in USB media/Home network

(Pages 48_51)

3 Display a PC image on the TV screen

(Pages 52_56)

4 Enjoy internet service* with the TV

(Pages 12 and 57_60)

* The following service is now

available:

• YouTube™ (Page 12)

• Net TV (Pages 59–60)

2 Adjust TV settings and enjoy internet

service

(Pages 31_43)

• You can launch Internet connection and Home network functions, as well as perform settings for the TV from the “HOME” screen.

USB media

Select Enter End

Home network IP Control Network setup

Input changeTV Menu CH list

Quick guide

Inserting the CA card into the CI module

In order to receive coded digital stations, a common interface module (CI module) and a CA card must be inserted in the CI slot of the TV.

1 Carefully insert the CI module in the CI slot with

the contact side forward.

2 The logo on the CI module must be facing

outward from the rear of the TV.

Checking CI module information

Go to “HOME” > “TV Menu” > “Setup” > “Option” > “CI menu”.

• This menu is only available for digital stations.

• The content of this menu depends on the provider of the CI module.

Module

General information on CI module displays.

Adjustment parameters of each CA card displays.

Enquiry

You can input numerical values such as passwords here.

NOTE

• It takes a few minutes to certify the licence key when you insert a CA card into the CI+ compatible CI module for the first time. This process may fail when there is no antenna input or you have never run “Auto installation”.

• The CI+ compatible CI module sometimes upgrades its firmware. You may not receive any TV images before upgrading. You can only use the power button during upgrading.

• Copy protected content may not be output or may be output with a copy control signal. The protect icon* is displayed when P.INFO is pressed while watching copy protected contents.

* Protect icon: X

• If the TV displays an update confirmation message for the CA card while receiving CI+ compatible broadcasts, follow the screen prompts.

• Make sure that the CI module is properly inserted.

Quick guide

Using the HOME screen

You can easily launch this “HOME” screen to enjoy Internet connection and Home network functions and to perform settings for the TV.

This product is embedded with LC Font technology, which was developed

LCFONT

by SHARP Corporation for clearly displaying easy-to-read characters on LCD screens.

Basic operation

1 Display the HOME screen

Press D (HOME) and the “HOME” screen will be displayed.

2 Select an item

Press a/b/c/d to select the desired service or menu, and then press ;.

See the right column for details on the operations in the “HOME” screen.

3 Exit the HOME screen

The operation will exit the “HOME” screen if you press > before it is completed.

Tips: HOME menu contents

USB media

Select Enter End

* When “ ” is displayed, the USB device for the “USB media” menu is not detected.

If “

* When “

” is displayed, check your USB device connection.

If “ When “ ” is displayed, the USB device for the “Time shift” is registered.

YouTube™



You can enjoy YouTube on your AQUOS.

AQUOS NET+ (Pages 59_60)



You can connect to the internet through AQUOS NET+.

Home network (Pages 48_50)



USB media (Pages 48_50)



TV Menu (Page 13)



Call up the OSD to perform settings for the TV. The OSD for the settings is called “TV Menu”. The “TV Menu” enables various settings and adjustments.

” is displayed, you cannot connect to your TV network.

” is displayed, check your TV network settings and connection.

Home network IP Control Network setup

Input changeTV Menu CH list

Input change



IP Control (Page 55)



Network setup (Pages 57_58)



CH list



Regarding the instructions in the manual

In this manual, the following expression is often used in order to simplify instructions.

• Go to “HOME” > “TV Menu” > “Setup” > ...

This indicates how to navigate through the HOME screen using the a/b/ c/d and ; buttons.

Quick guide

Using the Menu screen

You need to call up the OSD to perform settings for the TV. The OSD for the settings is called “Menu”. The “Menu” enables various settings and adjustments.

Display the Menu screen

Go to “HOME” > “TV Menu”.



• You can also display the Menu screen with pressing the MENU button on the side of the TV.

Selecting in the Menu

Press c/d to select the desired menu,



and then press ;. Press 6 to return to the previous menu category.

Press c/d to select the desired sub-



menu, and then press ;. Press a/b to select the item you want to



select/adjust, and then press ;.

AV mode

OPC

Backlight

Contrast

Setup

Picture

[Off]

CH list

:Back:Enter

Selecting options

Press a/b or c/d to



configure the control for improving TV viewing, and then press ;.

EXAMPLE

Backlight

Yes No

NOTE

• Refer to the guide display below the menu bar to see when to press the ; button.

About the guide display

The guide display below the menu bar shows operations for the OSD.

• The bar above is an operational guide for the remote control unit. The bar will change in accordance with each menu setting screen.

:Select

SetupCH list

:Back:Enter

NOTE

• “Menu” options differ according to the selected input modes, but the operating procedures are the same.

• Items with 4 cannot be selected for various reasons.

• Some items cannot be selected depending on signal types, optional settings or connected devices.

Using Software keyboard

Use the software keyboard when you need to input text.

1 Char. Set

Changes character set into the alphabet, numbers, symbols, etc.

2 Caps

Changes characters to capital/lower case.

3 Done

Confirm the entry.

4 Cancel

Abort input and close the software keyboard.

5 R/G/Y/B (Colour)

buttons

Selects the coloured items on the screen.

Caps

Done

Cancel

Cursor Left Caps Char.Set Cursor Right

Char.Set

6 Input cursor

Press c/d to move the cursor when highlighted.

7 Input field

The text you enter is displayed as you type it in.

8 Character

Input characters by using these buttons.

9 ?

Put a line break.

Clear

Delete

0 Clear

Erases the character string.

• When the cursor is somewhere in a line: The character string to the right of the cursor will be erased.

• When the cursor is at the right end of a line: The entire line will be erased.

Q Delete

If the cursor is at the right end of a line, this erases text one character at a time.

• You can also delete text by pressing 6 on the remote control unit.

NOTE

• Depending on the application, there may be a different software keyboard than the one indicated above.

Initial auto installation

When the TV is powered on for the first time after purchase, the initial auto installation wizard appears. Follow the menus and make the necessary settings one after another.

Confirm the following before turning on the power

Is the antenna cable connected?

Is the AC cord plugged in?

Important information:

Satellite services are only available for the 645 model series.

1 Press a on the TV.

• The initial auto installation wizard appears.

2 Setting the OSD language.

Press a/b/c/d to select the desired language, and then press ;.

3 Selecting the location of the TV.

HOME

Press c/d to select where you will use this TV, and then press ;.

• The confirmation screen pops up only when

selecting “STORE”. Press c/d to select “Yes” or “No”.

• HOME: “STANDARD” will be the default value for the “AV mode” setting.

• STORE: “DYNAMIC (Fixed)” will be the default value for the “AV mode” setting. If the “AV mode” is changed, the TV will automatically switch back to “DYNAMIC (Fixed)” when there is no operation using the TV or remote control unit for 30 minutes.

• STORE: A demonstration image will be displayed after initial auto installation is completed. If you have chosen “STORE” by mistake, go to “HOME” > “TV Menu” > “Setup” > “View setting” > “Reset” > select “HOME” again.

STORE

4 Setting the country.

Press a/b/c/d to select your country or area, and then press ;.

• This setting screen only appears during the initial auto installation.

NOTE

• Some functions may not display or be selectable depending on the country setting or cable provider selection.

5 Setting the PIN.

1 Press c/d to select “Yes”, and then press

• When “No” is selected, the PIN code setting is skipped.

Enter a four-digit number as a PIN using the 0–9 buttons.

3 Enter the same four-digit number as in step

2 to confirm.

4 Press ;.

NOTE

• When “France” is selected in the country setting, the PIN code setting cannot be skipped.

• “0000” cannot be set as the PIN code.

• When the PIN code setting is skipped, the default PIN code (“1234”) will automatically be set.

• To change the PIN setting, refer to Individual setting — PIN (Page 38). To reset the PIN setting (PIN input will no longer be needed), refer to Reset the PIN (Page 61).

6 Starting channel search.

Digital search

Analogue search

Satellite search

Press a/b to select “Digital search”, “Analogue search” or “Satellite search”, and then press ;.

• (645 series only) After performing “Digital search” or “Analogue search”, the screen switches to the “Satellite search” setting. You should then execute “Yes” if you want to search for satellite channels.

• To watch both digital broadcasts and analogue broadcasts, you should perform “Digital search” or “Analogue search” from “Auto installation” under the “Setup” menu (Page 35).

• When you select “Satellite search”, only satellite broadcasts will be searched.

• If you want to search for more broadcasts, execute “Additional search” from the “Programme setup” menu (Pages 35_37).

NOTE

• If you turn off the power on the TV while performing a channel search, the initial auto installation wizard will not appear. The auto installation function allows you to execute the installation again from “HOME” > “TV Menu” > “Setup” > “View setting” (Page 35).

• The initial auto installation wizard will abort if you leave the TV unattended for 30 minutes before searching for channels.

• When “Italy” or “France” is selected in the country setting, the default age restriction value is set to 18.

Initial auto installation

Digital broadcast setting

Press c/d to select “Terrestrial” or “Cable”, and then press ;.

Terrestrial

Searching for terrestrial broadcasts

The TV searches for, sorts and stores all the receivable TV stations according to their settings and the connected antenna.

• To abort the initial auto installation in progress,

press 6.

NOTE

• A region or service selection screen may display depending on the country settings or cable providers selections. Follow the screen prompts to make the selections.

645 series only

After searching for terrestrial channels, the screen switches to the “Satellite search” setting (Page 16).

Searching for cable broadcasts

To change each item to the appropriate settings:

1 Press a/b to select

the menu, and then press ;.

2 Press a/b/c/d or

0_9 to select or input the appropriate item/ value, and then press ;.

Scrambled stations [Yes]

Search method [Channel]

Start frequency

Network ID [None]

Symbol rate 1

Symbol rate 2

QAM modulation 1

QAM modulation 2

Reset

Search start

Cable

3 Press a/b to select “Search start”, and then

press ;.

4 Press c/d to select “Yes” to start searching

cable broadcasts, and then press ;.

5 The TV searches for, sorts and stores all the

receivable TV stations according to their settings and the connected antenna.

• To abort the initial auto installation in progress,

press 6.

645 series only

After searching for cable channels, the screen switches to the “Satellite search” setting (Page 16).

Menu Description Selectable items

Scrambled stations

Search method

Start frequency

Network ID

Symbol rate 1/ Symbol rate 2*

QAM modulation 1

QAM modulation 2

Specifies if you need to add payTV services.

Specifies how you search for channels.*

Specifies the network.*

Input the value received for

CATV.*

Yes, No

Channel,

Frequency, Quick

From 47.0_858.0 MHz

None, 0_65535

1000_9000

16, 32, 64, 128, 256

None, 16, 32, 64, 128, 256

I Set up “Symbol rate 2” if the cable provider uses

several symbol rates.

J Details about the “Search method” items are as

follows: _Channel: Extracts all information from a channel (quick, but needs corresponding TV stations).

_Frequency: Checks every frequency in range (slow). _Quick: All services are searched by one frequency.

This menu works only when your cable provider provides the frequency and the network ID (e.g., Homing channel). When “Quick” is selected, “Scrambled stations” is automatically set to “No”, and “None” for the “Network ID” menu cannot be selected.

K Set this to register only the specified network ID

without registering any special services.

L The symbol rates are specified by the cable provider.

Analogue broadcast setting

The TV searches for, sorts and stores all the receivable TV stations according to their settings and the connected antenna.

• To abort the initial auto installation in progress,

press 6.

645 series only

After searching for analogue channels, the screen switches to the “Satellite search” setting (Page 16).

Initial auto installation

Searching for satellite broadcasts (645 series only)

Press a/b to select “Satellite search”, and then press ;.

Digital search

Analogue search

Satellite search

• The antenna connection setting screen is displayed.

Single satellite

2 satellites on toneburst switchbox

Max. 4 satellites on DiSEqC multiswitch

Communal satellite system

NOTE

• You can select the antenna connection method from the four types. Consult your dealers before using a method other than “Single satellite”.

“Single satellite” setting

1 Press a/b to select “Single satellite”, and then

press ;.

2 Press a/b/c/d to select your favorite

satellite, and then press ;.

Atlantic Bird 1

Euro Bird 1

NOTE

• Follow the instructions on the screen for “2 satellites on toneburst switchbox”, “Max. 4 satellites on DiSEqC multiswitch” and “Communal satellite system” settings.

• To set multiple satellite channels, go to “Max. 4 satellites on DiSEqC multiswitch”.

• When a power supply is needed for your satellite antenna, follow the procedure below in order to supply the voltage specified by your service provider, etc.: Go to “HOME” > “TV Menu” > “Setup” > “View setting” > “Channel settings” > “Antenna setup-DIGITAL” > “Satellite setup” > “Change setting” > “Communal satellite system”.

Search start:

DVB-S/S2 channel searching.

1 Press c/d to select “Yes”, and then press ;.

• To change the settings for “Scrambled stations” or

“Symbol rate”, press a/b to select the item to be reconfigured and then perform “Search start”.

Scrambled stations

SAT1-Symbol rate 1

SAT1-Symbol rate 2

Search start

[Yes]

Yes No

2 The TV searches for and stores all the receivable

TV stations according to their settings and the connected antenna.

• Select “Yes” to sort the search result in alphabetical order.

• To abort the initial auto installation in progress, press 6.

NOTE

• Scrambled stations: Specifies if you need to choose pay-TV services.

• Follow the procedure to perform “Manual search” if you want to configure the frequency or symbol rate and start to search after performing the auto searching during the initial auto installation.

− Go to “HOME” > “TV Menu” > “Setup” > “View setting” > “Channel settings” > “Programme setup” > “Satellite setting” > “Manual search”.

− Symbol rate: You need to set each symbol rate of all the satellite broadcasts that the TV can receive (eight is the maximum number of symbol rates that can be displayed).

Initial auto installation

Checking signal strength and

channel strength (DVB-T/T2*

)

S2*

If you install a DVB-T/T2/C/S/S2 antenna for the first time or relocate it, you should adjust the alignment of the antenna to receive a good reception while checking the antenna setup screen.

I 646 series only

J 645 series only

1 Go to “HOME” > “TV Menu” > “Setup” > “View

setting” > “Channel settings” > “Antenna setupDIGITAL”.

2 Press a/b to select “Digital setup” or “Satellite

setup”, and then press ;.

Checking signal strength

3 Press a/b to select “Signal strength”, and then

press ;.

Signal strength for DVB-T/T2/C

Supply voltage

Signal strength

Channel strength

Signal strength for DVB-S/S2

Signal strength

Channel strength

CH No. Signal strength

Current Max.

Quality

Current Max.

Signal strength

Current Max.

Quality

/C/S*2/

Checking channel strength

4 Press a/b to select “Channel strength”, and

then press ;.

• You can input a specified frequency band using the

0_9 numeric buttons.

Channel strength of DVB-T/T2

Supply voltage

Signal strength

Channel strength

Channel strength of DVB-C

Supply voltage

Signal strength

Channel strength

Channel strength of DVB-S/S2

Signal strength

Channel strength

Frequency

CH No. Signal strength

Current Max.

Quality

Current Max.

Frequency

Symbol rate

QAM modulation

Signal strength

Current

Quality

Current Max.

Frequency

Symbol rate

Band

Signal strength

Current Max.

Quality

Current Max.

Vert/Low

MHz

Max.

MHz

5 Position and align the antenna so that the

maximum possible values for “Signal strength” and “Quality” are obtained.

NOTE

• The values of “Signal strength” and “Quality” indicate when to check the appropriate alignment of the antenna.

Supplying power to the antenna

You must supply power to the antenna in order to receive digitally/terrestrially broadcast stations after connecting the antenna cable to the antenna terminal on the rear of the TV.

1 Go to “HOME” > “TV Menu” > “Setup” > “View

setting” > “Channel settings” > “Antenna setupDIGITAL” > “Supply voltage”.

2 Press c/d to select “On”, and then press ;.

Current Max.

Watching TV

Daily operation

Turning on/standby the power

Turning on the power

Press a on the TV or >a on the remote

control unit.

Standby mode

Press a on the TV or TV a on the remote control unit when TV is on.

• The TV enters standby mode and the image on the screen disappears.

• Weak electric power is still consumed even when the TV is turned standby mode.

• To completely turn off the power to the TV, unplug the AC cord from the AC outlet. However, do not unplug the AC cord unless otherwise instructed.

Switching between digital, satellite* and analogue broadcasts

Watching digital broadcasts

Watching satellite broadcasts

*Important information:

Satellite services are only available for the 645 model series.

NOTE

• If multiple satellite services are set, each time you press the SAT button the channel switches as follows.

SAT1 SAT2

Watching analogue broadcasts

SAT3SAT4

Selecting an external video source

Once the connection is made, press b to display the “INPUT” screen, and then press b or a/b to switch over to the appropriate external source with ;.

CH list

INPUT

Switchable

NOTE

• You can also select an external video source from “HOME” > “Input change”.

• Only HDMI inputs which are not set for “Input skip” (Page 41) and properly connected inputs can be selected.

NOTE

• If you are not going to use this TV for a long period of time, be sure to remove the AC cord from the AC outlet.

Changing channels

With :r/s With 0_9

Watching TV

Selecting a sound mode

DTV/SAT mode

If multi sound modes are received, each time you press 7 the mode switches as follows.

Audio (ENG) STEREO

L/R LRLR

Audio (ENG) CH A

CH A CH B CH AB

Audio (ENG) MONO

Press c/d to select L or R sound when the STEREO or DUAL MONO screen is displayed.

Audio (ENG) STEREO

L/R LRLR

NOTE

• The sound mode screen disappears in six seconds.

• Selectable items vary depending on the received broadcasts.

• When the “Audio description setting” menu is set to “On”, the audio description sound is selected depending on the main audio.

ATV mode

Each time you press 7, the mode switches as shown in the following tables.

NICAM TV broadcasts selection Signal Selectable items Stereo

Bilingual

Monaural

NICAM STEREO, MONO NICAM CH A, NICAM CH B, NICAM CH AB,

MONO NICAM MONO, MONO

A2 TV broadcasts selection Signal Selectable items Stereo Bilingual Monaural

STEREO, MONO CH A, CH B, CH AB MONO

NOTE

• When no signal is input, the sound mode will display “MONO”.

Channel display

You can display the channel information by pressing p on the remote control unit.

DTV mode ATV mode

Audio (ENG) STEREO Video Subtitle Off >> New information

I Four digit numbers (e.g., 0001) are displayed after

selecting the five Nordic countries in the country setting.

SAT mode

Audio (ENG) STEREO Video Subtitle Off >> New information

J Satellite channels are displayed by four digit numbers

(e.g., 0001).

K You can set four satellite stations to “SAT1”, “SAT2“,

“SAT3“, “SAT4”.

Time display in channel information

You can display the time information included in DTV, SAT and teletext broadcasts.

Auto

Subtitle

MONO

NOTE

• Skip step 1 if receiving DTV/SAT broadcasts.

1 Select a TV channel (the time information is

automatically captured).

2 Press p. The channel display will appear on the

TV.

3 Press p again within the several seconds

that the channel display is on the screen. Time information will be shown in the lower-right corner of the screen for several seconds.

4 Even when you change the TV channel, you can

display the time information with steps 2 and 3 above.

Operation without a remote control unit

You can operate the menu settings using the TV control buttons.

TV control buttons Remote control buttons

:r/s

i+/-

–

; a/b d/c

Watching TV

EPG

EPG is a programme list that is displayed on the screen. With the EPG, you can check the schedule for DTV/SAT/RADIO/DATA, view detailed information about them and tune to an event currently on-air.

Useful settings for using EPG

View setting

EPG

If you want to use the EPG for digital stations, select “Yes”. The EPG data must be automatically captured while the TV is in standby mode. After setting to “Yes”, it may take some time to turn off the power using the remote control unit or the TV due to the data capture process.

Go to “HOME” > “TV Menu” > “Setup” > “View setting” > “Individual setting” > “Standby search” > “EPG”.

Option

Display range setup

The “Display range setup” allows you to select three types of time spans for display on the screen.

Go to “HOME” > “TV Menu” > “Setup” > “Option” > “EPG setup” > “Display range setup”.

Item

Mode 1 (Wide angle)

Mode 2 (Zoom)

Mode 3 (Vertical angle)

Displays six hours of programme information.

Displays three hours of programme information.

Changes to the EPG display format with a vertical time span.

Option

Genre icon setup

You can grey out or place a mark on desired genres and smoothly search for programmes you frequently watch.

1 Go to “HOME” > “TV Menu” > “Setup” >

“Option” > “EPG setup” > “Genre icon setup”.

2 Press a/b to select the desired genre, and then

press ;.

Genre icon list

Icon Genre Icon Genre

Movie/Drama Music/Ballet/Dance

News/Current affairs

Show/Game show

Sports

Children’s/Youth programmes

3 Press a/b to select a level to pick out or

search for programmes you want to watch (“Standard”, “Light”, “Remark”).

Arts/Culture (without music)

Social/Political issues/Economics

Education/Science/ Factual topics

Leisure hobbies

Watching TV

Selecting a programme using EPG

The illustrations on this page are explained using three digit services.

Display/Close the EPG screen

Press EPG.

AM PM

Programme info. Search by genre Search by date Timer list

Select Enter Back Exit

NOTE

• You can also display the EPG screen from “HOME” > “TV Menu” > “EPG” > “EPG”.

Select a programme

1 Select the time span

Press c/d to select the time span you want to search.

• Continue to press d to display

programmes in the next time span.

3 Check programme

information

4 Search a programme in a