Loading...
USER MANUAL
Before using the TV, please read this manual thoroughly and retain it for future reference.
ES-G154912
ENGLISH
FRANÇAIS
ESPAÑOL
USER MANUAL
Before using the TV, please read this manual thoroughly and retain it for future reference.
ENGLISH
ENGLISH |
FRANÇAIS |
ESPAÑOL |
Copyright Statement
© 2016 Hisense Company Ltd. All Rights Reserved.
All material in this User Manual is the property of Hisense Company Ltd. and its subsidiaries, and is protected under US and International copyright and/or other intellectual property laws. Reproduction or transmission of the materials, in whole or in part, in any manner, electronic, print, or otherwise, without the prior written consent of Hisense Company Ltd., is a violation of Hisense Company Ltd. rights under the aforementioned laws.
No part of this publication may be stored, reproduced, transmitted or distributed, in whole or in part, in any manner, electronic or otherwise, whether or not for a charge or other or no consideration, without the prior written permission of Hisense Company Ltd. Requests for permission to store, reproduce, transmit or distribute materials may be made in writing to the following address:
USA: |
Hisense USA Corporation |
|
PO Box 3289 |
|
Suwanee, GA 30024 |
CANADA: Hisense Canada Co., Ltd, |
|
|
405 Britannia Rd E., Suite 11 |
|
Mississauga, Ontario,L4Z 3E6 |
MEXICO: |
Hisense Mexico S de RL de CV |
|
Boulevard Miguel de Cervantes Saavedra No. 301, Torre Norte, Piso 2, |
|
Colonia Ampliación Granada, C.P. 11520, en México Distrito Federal. |
“Sharp™”, “Aquos™”, “Quattron™” and any and all other Sharp product names, logo’s, slogans or marks are registered trademarks owned exclusively by Sharp Corporation.
“Hisense™”, and any and all other Hisense product names, logo’s, slogans or marks are registered trademarks and intellectual property rights of Hisense Company Ltd. and its subsidiaries.
This product is sold to you under one or more license agreements between Sharp Corporation and Hisense International (Hong Kong) America Investment Co. Ltd. All other trademarks are the property of their respective holders.
1
ENGLISH |
FRANÇAIS |
ESPAÑOL |
Disclaimer Page
**Notwithstanding anything to the contrary, including in any or all descriptions, representations, statements or other communications related to this Sharp, Aquos or Quattron device (hereinafter “Device”) made in any form whatsoever and at any time, some or all of the pre-installed, or subsequently installed Application Services may not be available or capable of functioning as intended by the provider of the Application Services in any or all usage areas for reasons outside of the control of the licensors or manufacturer of this device, including but not limited to, Internet access, local service limitations, etc. Any purchase or use of the Device, including any Application Services, is purely at the user’s risk. Application Services are provided on an as-available basis without warranties of any kind, either expressed or implied, that the Application Service will be uninterrupted or error-free, including but not limited to vagaries of weather, disruption of Service, acts of God, warranties of title, local or regional limitations, no infringement, NOR IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. No advice or information given by the licensors or manufacturers providers, affiliates, or contractors or their respective employees shall create such a warranty. All licensors and the manufacturer of this device, jointly and separately, specifically disclaim any and all responsibility for any or all Application Services from functioning at any time, and by purchasing the Device, you accept such disclaimer without any claim on the licensors and manufacturer. You are solely responsible for providing an active and working connection to the Internet, along with any and all hardware and/or software necessary to use the Device as intended.
Disclaimer:
Images throughout this document are for illustrative purposes only and may differ from the actual product.
2
ENGLISH |
FRANÇAIS |
ESPAÑOL |
Content |
|
Content................................................................................................................ |
3 |
Connecting Devices to your TV........................................................................ |
5 |
Connecting an antenna, cable set-top box or satellite receiver................................................. |
5 |
Connecting a satellite receiver, DVD player or other audio visual (AV) device with a |
|
composite video cable (yellow/red/white).................................................................................. |
5 |
Connecting an AV device with a component video cable (red/blue/green) ............................. |
6 |
Connecting an AV device with an HDMI cable.......................................................................... |
6 |
Connecting an MHL-Enabled device......................................................................................... |
7 |
Connecting a headphone........................................................................................................... |
7 |
Connecting speakers or other audio receivers.......................................................................... |
7 |
Connecting a digital sound bar to use Audio Return Channel (ARC)........................................ |
8 |
Connecting a USB device.......................................................................................................... |
8 |
Connecting Your TV to a Wireless or Wired Network..................................... |
9 |
Connecting to a wireless network............................................................................................... |
9 |
Connecting to a wired (Ethernet) network................................................................................ |
10 |
Using Your TV Remote Control....................................................................... |
11 |
Buttons on your TV remote....................................................................................................... |
11 |
Remote control range information............................................................................................ |
11 |
Begin using your remote........................................................................................................... |
12 |
Completing the First-Time Setup Menu.......................................................... |
13 |
Shortcuts Instructions..................................................................................... |
15 |
Turning your TV on or off.......................................................................................................... |
15 |
Selecting the input source........................................................................................................ |
15 |
Using the Live TV...................................................................................................................... |
15 |
Basic Settings................................................................................................... |
17 |
Using the Settings Menu........................................................................................................... |
17 |
Picture Menu............................................................................................................................. |
18 |
Sound Menu.............................................................................................................................. |
19 |
Channel Menu........................................................................................................................... |
19 |
Network Menu........................................................................................................................... |
20 |
System Menu............................................................................................................................ |
20 |
About TV Menu......................................................................................................................... |
21 |
Parental Controls...................................................................................................................... |
22 |
3
ENGLISH |
FRANÇAIS |
ESPAÑOL |
Advanced TV Settings...................................................................................... |
24 |
Getting familiar with the Home screen...................................................................................... |
24 |
Inputs........................................................................................................................................ |
24 |
Media........................................................................................................................................ |
25 |
Apps......................................................................................................................................... |
26 |
Using Anyview Cast to mirror content from your device to the TV screen............................... |
27 |
Software updates for your TV................................................................................................... |
28 |
Quick Problem-Solving Tips............................................................................ |
29 |
4
ENGLISH |
FRANÇAIS |
ESPAÑOL |
Connecting Devices to your TV
You have several options for connecting your TV to different devices. The method in which you connect will be based upon the type of cables you have and the available outputs on your device.
Connecting an antenna, cable set-top box or satellite receiver
To connect an antenna,cable set-top box or satellite receiver:
1.Connect one end of a coaxial cable (not included) to the RF OUT port on the antenna, cable or satellite box. If you are using an antenna with twin-lead cable, you may need a 300-75 Ohm adapter (not provided) to connect it to the back of your TV. Likewise, if you are using several antennas, you may need a combiner (not provided).
2.Connect the other end of the cable to the ANT/CABLE port on the side of TV.
3.Using your remote, press the [INPUT] button and select TV as the input source.
TV PORT |
|
|
|
|
|
|
|
|
EXTERNAL DEVICE |
||||||||
|
|
|
|
|
|
|
|
|
|
Cable Set top box |
|||||||
ANT/CABLE |
|
|
|
|
|
|
|
|
|
|
|||||||
|
|
|
or |
|
|
|
|
|
ANT OUT |
||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
RF Out
Connecting a satellite receiver, DVD player or other audio visual (AV) device with a composite video cable (yellow/red/white)
To connect an AV device with a composite video cable (not provided):
1.Use the audio and video cables to connect the composite video/audio ports of the external AV device to the AV IN ports of the TV. (Video = yellow, Audio Left = white, and Audio Right = red)
2.Plug the connected devices into the AV connectors on the TV before switching it on.
3.Using your remote, press the [INPUT] button and select AV as the input source.
TV PORTS
|
Red (R) |
|
Audio Cable |
|
White (L) |
IN |
|
AV |
|
|
Yellow or Green (Video) |
|
Video Cable |
|
|
EXTERNAL DEVICES |
|
|
|
|
VCR |
Red (R) |
R |
|
|
|
|
|
|
|
|
|
DVD Player/Recorder |
White (L) |
L |
|
|
|
|
|
|
|
|
Video |
Set-top box |
|
Video |
Camer |
|
Yellow (Video) |
|
||
|
|
||
|
|
|
|
|
|
|
|
|
AV OUT |
|
|
5
ENGLISH |
FRANÇAIS |
ESPAÑOL |
Connecting an AV device with a component video cable (red/blue/green)
To connect an AV device with a component cable (not provided):
1.Use a component video cable to connect the component output ports of the external device to the YPBPR ports for the TV. (Y = green, PB = blue, and PR = red). Use an audio cable to connect the component audio ports of the external device to the TV AUDIO (L/R) ports.
2.Plug the connected devices into the YPBPR and L/R ports on the TV before switching it on.
3.Using your remote, press the [INPUT] button and select COMPONENT as the input source.
TV PORTS
R |
|
L |
|
IN |
|
P |
COMPONENT |
R |
|
P |
|
B |
|
Y |
|
|
|
|
|
EXTERNAL DEVICES |
|
Red(R) |
Audio Cable |
Red(R) |
R |
|
VCR |
|
|
|
|
||
|
|
|
|
|
|
|
|
|
L |
|
DVD Player/Recorder |
|
|
|
|
|
|
Red(PR/CR) |
|
Red(PR/CR) |
PR |
|
|
|
|
|
|
|
|
Blue(PB/CB) |
Component Cable |
Blue(PB/CB) |
PB |
Video |
Set-top box |
|
|
|
Camera |
|
|
Green(Y) |
|
Green(Y) |
Y |
|
|
|
|
|
|
|
|
|
|
|
|
|
Satellite Receiver |
|
|
|
Component |
|
|
NOTE
• One AV device can be connected to the TV using a component video or composite video cable.
Connecting an AV device with an HDMI cable
This 4K TV has two different software versions of HDMI ports to connect HDMI-enabled devices. The two high-powered HDMI version 2.0 (HDMI 3, HDMI 4) inputs enable you to connect 4K Ultra-HD external devices that require more bandwidth to transmit to the TV screen. For example, if you have an X-box or Blu-ray player that supports the 2.0 standard. The two HDMI version 1.4 inputs are great for any of your external devices that support a standard full highdefinition resolution of 1080p.
Please refer to the User Manual that came with your device for step-by-step instructions. To connect an AV device with an HDMI cable (not provided):
1.Use an HDMI cable to connect the HDMI output port of the AV device to the HDMI port of the TV.
2.Plug the connected devices into the HDMI port on the TV before switching it on.
3.Using your remote, press the [INPUT] button and select the corresponding HDMI input.
TV PORT
HDMI
HDMI Cable
HDMI
EXTERNAL DEVICES
DVD
Set-top Box
NOTES
•Because the HDMI connector provides video and audio signals, it is not necessary to connect an audio cable.
•We strongly recommend to use HDMI Cable with 2 cores as shown in the figure.
6
ENGLISH |
FRANÇAIS |
ESPAÑOL |
Connecting an MHL-Enabled device
You can connect an MHL-enabled device, such as a cell phone, and view the screen of your device on the TV.
1.Connect one end of an HDMI-to-MHL cable (not provided) to the micro USB port on the device.
2.Connect the other end of the cable to the HDMI / MHL port.
TV PORT
MHL
HDMI
EXTERNAL
DEVICE
HDMI-to-MHL Cable
3. Select the corresponding source from the TV.
NOTES
•This feature may be unavailable on some TV series.
•We strongly recommend to use MHL Cable with 2 core as shown in the figure.
Cell Phone
Connecting a headphone
You can connect headphone (not provided) to the AUDIO OUT port on your TV. While the headphone is connected, the sound from the built-in speakers will be disabled.
TV PORT |
EXTERNAL DEVICE |
/ |
Headphone |
AUDIO OUT |
Connecting speakers or other audio receivers
To connect speakers or other audio receivers with an audio cable (not provided):
1.Use an audio cable to connect the digital audio in port of the audio receiver device to the DIGITAL AUDIO OUT port of the TV. Another option is to use an RCA Y-cable (1/8”-stereo mini to L/R phono) to connect an analog sound system to the AUDIO OUT port of the TV.
2.Plug the connected devices into the main power socket before switching on the TV.
TV PORTS |
|
EXTERNAL DEVICES |
||
DIGITAL |
|
|||
AUDIO OUT |
Audio Cable |
|
|
|
|
|
|
|
|
|
|
Digital Sound Bar |
|
|
/ |
Red(R) |
|
|
|
AUDIO OUT |
|
|
|
|
Audio Cable |
|
|
|
|
|
|
|
|
|
|
White(L) |
Audio Amplifier |
Powerless |
Speaker |
|
|
Bass Speaker |
|
|
•TIP: If you prefer to use Audio Return Channel, then see Connecting a digital sound bar to use Audio Return Channel (ARC) on page 8.
NOTES
•When a digital audio system is connected to the DIGITAL AUDIO OUT port, decrease the TV and system volume.
•5.1 CH (channel) audio is available when the TV is connected to an external device that supports a 5.1 channel surround sound
•You can receive 5.1 channel audio in one of two ways. The first way is to connect the DIGITAL AUDIO OUT port from the device to the Amplifier. The second way is to connect the DIGITAL AUDIO OUT port on the back of the TV to the Optical port on the Amplifier.After you’ve completed one of the two methods then be sure to go into the Advanced Audio Settings of the TV and select RAW to receive the 5.1 channel audio. You will need to also go into the sound or audio settings of your device to ensure it is set to 5.1 Channel output. It may read ‘Bitstream’, ‘RAW’ or ‘Digital’.
7
ENGLISH |
FRANÇAIS |
ESPAÑOL |
Connecting a digital sound bar to use Audio Return Channel (ARC)
If you’d like to use the Audio Return Channel (ARC) feature to have sound sent from the TV back down an HDMI cable to a digital sound bar, then you will need to connect the cable to the HDMI / ARC port. By using this feature, you will also be able to control the sound bar with your TV remote instead of having to use multiple remotes for each device.
To connect a digital sound bar with an HDMI cable (not provided):
1.Connect the cable that’s attached to the sound bar to the HDMI / ARC port on the TV.
2.Turn on the sound bar by pressing the Power button.
3. Press the [ ] button on your remote and press the [ > ] button of your remote to display the Settings Menu, go to
System > HDMI Function.
4.Turn on the CEC&MHL Control setting.
5.Return the Settings Menu by re-pressing the [BACK] button.
6.Select Sound > Advanced Audio Settings.
7.Go to the section of the screen that reads TV Speaker & ARC and select ARC First.
NOTES
•Only digital sound bars that require a wired connection are compatible with the TV.
•If the device has an Input Selector feature then make sure to change it to TV.
EXTERNAL DEVICE
TV PORT
HDMI ARC
HDMI Cable
HDMI
Digital Sound Bar
Connecting a USB device
You can connect the USB devices such as hard |
|
|
|
drives, USB sticks and digital cameras for browsing |
TV PORTS |
EXTERNAL DEVICE |
|
photos, listening music and watching recorded |
USB |
USB |
|
movies. |
|
|
|
1. Connect a USB device into the USB port. |
DC 5V 1A(MAX) |
DC 5V 0.5A(MAX) |
|
2.Select the Media type on the Media screen or
Home screen. For more information, see Media on page 25.
NOTES
•When connecting a hard disk or a USB hub, always connect the mains adapter of the connected device to the power supply. Exceeding a total current consumption may result in damage. The USB1.1 and USB2.0 devices maximum current consumption are 500mA. The USB3.0 device maximum current consumption is 1A.
•For individual non-standard high-capacity mobile hard disk, if it’s impulse current is greater than or equal 1A, it may cause TV-rebooting or self-locking. So the TV does not support it.
•The USB port supports a voltage of 5V.
8
ENGLISH |
FRANÇAIS |
ESPAÑOL |
Connecting Your TV to a Wireless or Wired Network
You have the option to connect your TV to a wireless or wired network to access the Internet. For more information about the network settings on TV, see Network Menu on page 20.
Connecting to a wireless network
Our built-in wireless LAN adapter supports the IEEE 802.11 ac/b/g/n communication protocols and we recommend that you use an IEEE 802.11n or IEEE 802.11ac router. When you play a video over an IEEE 802.11 b/g connection, the video may not play smoothly.
The LAN Port on the Wall
Wireless Router
Wireless Adapter built-in the TV set
NOTES
•You must use the SHARP built-in Wireless LAN Adapter to use a wireless network because the set does not support an external USB network adapter.
•To use a wireless network, your TV must be connected to a wireless IP sharer. If the wireless IP sharer supports Dynamic Host Configuration Protocol (DHCP), your TV can use a DHCP or static IP address to connect to the wireless network.
•Select a channel for the wireless IP sharer that is not currently being used. If the channel set for the wireless IP sharer is currently being used by another device nearby, this will result in interference and communication failure.
•If you apply a security system other than the systems listed below, it will not work with the TV.
•If Pure High-throughput (Greenfield) 802.11N mode is selected and the Encryption type is set to WEP, TKIP or TKIP-AES (WPS2 Mixed) for your Access Point (AP), then the SHARP TV will not support a connection in compliance with these Wi-Fi certification specifications.
•If your access point (AP) supports Wi-Fi Protected Setup (WPS), you can connect to the network via Push Button Configuration (PBC) or PIN (Personal Identification Number). WPS will automatically configure the SSID and WPA key in either mode.
9
ENGLISH |
FRANÇAIS |
ESPAÑOL |
Connecting to a wired (Ethernet) network
You can attach your TV to your LAN in one of the three following ways:
Option 1
You can attach your TV to your LAN by connecting the LAN port on the back of your TV to an external modem using a Cat 5 LAN cable. See the illustration below.
External Modem |
The Modem Port on the Wall |
(ADSL / VDSL / Cable TV) |
|
TV PORT
LAN |
Ethernet Cable |
Modem Cable |
Option 2
You can attach your TV to your LAN by connecting the LAN port on the back of your TV to an IP Sharer which is connected to an external modem. Use an Ethernet cable for the connection. See the illustration below.
IP Sharer (Router) |
External Modem |
The Modem Port on the Wall |
(with DHCP server) |
(ADSL / VDSL / Cable TV) |
|
TV PORT
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
LAN |
Ethernet Cable |
Ethernet Cable |
|
|
|
Modem Cable |
|||||||||||||||
Option 3
Depending on how your network is configured, you may be able to attach your TV to your LAN by connecting the LAN port on the back of your TV directly to a network wall outlet with an Ethernet cable. See the diagram below.
The LAN Port on the Wall
TV PORT
LAN |
Ethernet Cable |
If you have a Dynamic Network, you should use an ADSL modem or router that supports Dynamic Host Configuration Protocol (DHCP). Modems and routers that support DHCP automatically provide the IP address, subnet mask, gateway, and DNS, so you don’t have to enter them manually. Most home networks are Dynamic Networks.
Some networks require a Static IP address. If your network requires a Static IP address, you must enter the IP address, subnet mask, gateway, and DNS values manually on your TV’s Cable Setup Screen when you set up the network connection. To get the IP address, subnet mask, gateway and DNS values, contact your Internet Service Provider (ISP).
NOTE
•You can use ADSL modems that support DHCP if your network requires a static IP address. ADSL modems that support DHCP also let you use static IP addresses.
10
ENGLISH |
FRANÇAIS |
ESPAÑOL |
Using Your TV Remote Control
Buttons on your TV remote
Power on / off |
INPUT |
Infrared transmitter
Change TV input source
Enter Channels / input numbers 
Turn Closed Caption On / Off |
CC |
The ‘Gear’ button for the |
|
Quick setup menu |
|
D-pad (up/down/left/right |
|
navigation buttons) |
|
Return to the previous place |
BACK |
in the menu or app |
|
Volume (up / down) |
VOL |
Mute and restore sound |
|
Media content control function buttons |
|
|
Dash button |
|
Select a digital sub-channel |
|
Special function buttons |
|
All Apps |
|
Confirm button |
OK |
|
|
Display the Home screen |
EXIT |
Exit the application |
|
Live TV |
CH |
Channel (up / down) |
|
Adjust Sleep timer setting |
SLEEP |
|
|
Quick access buttons to apps |
Remote control range information
The remote control can work at a distance of up to 26 feet in front of the TV set. 
It can work at a 30 degree horizontal or vertical angle.
11
ENGLISH |
FRANÇAIS |
ESPAÑOL |
Begin using your remote
1. Slide the back cover to open the battery compartment of the remote control.
1 |
2 |
3 |
2.Insert two AAA size batteries. Make sure to match the (+) and (-) ends of the batteries with the (+) and (-) ends indicated in the battery compartment.
3.Replace the battery compartment cover.
NOTES
•Discard batteries in a designated disposal area. Do not throw them into a fire.
•Remove old batteries immediately to prevent them from leaking into the battery compartment.
•If you do not intend to use the remote control for a long time, remove the batteries.
•Battery chemicals can cause a rash. If the batteries leak, clean the battery compartment with a cloth. If chemicals touch your skin then wash it immediately.
•Do not mix old and new batteries.
•Do not mix alkaline, standard (carbon-zinc) or rechargeable (NiCd, NiMH, etc.) batteries.
•Do not continue using the remote if it gets warm or hot.
•Call our Support Center immediately on the SHARP support website.
Program your universal cable or satellite remote control to operate your new sharp television (only for USA)
If you would like to program your other household remote controls to your new SHARP television,please refer to the User’s Manual supplied by your Cable or Satellite provider. The Cable or Satellite providers’ User’s Manuals should include instructions on how to program their remote to your television.
A list of SHARP codes for the most common Cable and Satellite providers are listed below. Use the SHARP code that is associated with your Cable or Satellite provider (if applicable).
DIRECTV
0178, 10178, 10019, 10748, 11314, 11660, 11710, 11780, 12049, 10171, 11204, 11326, 11517, 11564, 11641, 11963, 12002, 12183
Time Warner Cable
386, 0178, 10178, 400, 450, 461, 456, 0748, 1463, 0463, 10463
Comcast
0178, 10178, 10463, 11463, 10748, 11314, 11660, 10171, 11204, 11326, 11517, 11641, 11780, 11785, 11892, 11963, 12002
Cox Communications
0178, 10178, 1326, 1463
Dish Network
505, 627, 538, 720, 659
If the SHARP code associated with your Cable or Satellite provider is not listed, does not work or you cannot locate the instructions to program your remote, call your local Cable or Satellite provider’s customer service center.
If your Cable or Satellite provider does not have a SHARP code available, please contact us.
Using your cable set-top box or satellite receiver remote as a ‘universal’ remote
If you prefer to use your Cable Set-top Box or Satellite Receiver Remote as a ‘Universal Remote’, then visit the Support page to view a list of the codes.
12
ENGLISH |
FRANÇAIS |
ESPAÑOL |
Completing the First-Time Setup Menu
Press the ]] button on the remote to turn on the TV.
After the splash screen that displays the SHARP logo appears, begin the first-time setup menu.
Screen |
Task |
LANGUAGE AND LOCATION
1. Using the D-pad arrows of your remote, choose your Language,
Country and Time Zone.
2. Navigate to the Forward arrow and press [OK].
Language |
Country |
Time Zone |
English |
United States |
Eastern |
• TIP: The edge of the drop-down boxes and the back and forward arrows change to blue when you select them.
Language |
Terms |
Mode |
Network |
Input |
Done |
TERMS OF SERVICE
|
|
|
|
|
1. |
Press [OK] on your remote to |
|
|
Accept all |
|
|
select Accept All. |
|
|
The EULA and Terms must be accepted in |
2. |
When you’re done, then navigate |
|||
|
order to continue. |
|
|
|
to the Forward arrow and press |
|
|
|
Accept EULA |
|
|
|
[OK]. |
|
|
Accept Terms of... |
|
|
|
|
Language |
Terms |
Mode |
Network |
Input |
Done |
|
TV USAGE MODE
|
|
|
|
|
Select Home (which appears by |
|
|
|
|
|
default) and then navigate to the |
|
|
TV Mode |
|
|
Forward arrow to press [OK]. |
|
|
|
|
|
|
|
|
Home |
|
|
NOTE |
|
Home Mode |
|
|
||
|
|
|
• Store Mode should only be |
||
|
In Home Mode, your TV will automatically adjust the |
||||
|
brightness of your screen based on the ambient light in |
selected by Retailers who plan |
|||
|
|
||||
|
the room. This mode uses less energy. |
|
to demonstrate the TV. |
||
|
|
|
|
|
|
Language |
Terms |
Mode |
Network |
Input |
Done |
13
ENGLISH |
FRANÇAIS |
ESPAÑOL |
Screen |
|
|
|
|
|
Task |
|
|
|
|
|
|
|
NETWORK CONNECTION |
|
|
|
|
|
|
|
|
Ethernet |
WiFi |
|
|
|
|
Select a Network |
|
|
If your TV does not automatically |
||
|
A2F4-05 |
|
|
|
|
|
|
|
|
|
|
detect an Ethernet connection, |
|
|
A3F6-01 |
|
|
|
|
|
|
A6F5-19 |
|
|
|
|
then select WiFi. When you’re done, |
|
A1F2-02 |
|
|
|
|
select your network from the list |
|
A2F4-03 |
|
|
|
|
that displays and move to the next |
|
A2F5-01 |
|
|
|
|
screen. |
|
R22 |
|
|
|
|
|
Language |
Terms |
Mode |
Network |
Input |
Done |
|
|
|
|
|
|
|
|
Select how you receive your TV LIVE TV INPUT SOURCE channels. Choose from one of the
following sources below and then move to the next screen.
|
|
|
|
|
|
• |
TV |
|
TV |
|
AV |
COMPONENT |
• |
AV |
|
|
|
|
|
|
|
• |
COMPONENT |
|
|
|
|
|
|
• |
HDMI |
HDMI 1 |
|
HDMI 2 |
HDMI 3 |
|
HDMI 4 |
|
NOTE |
|
|
|
|
|
|
|
• If you use an antenna to |
|
|
|
|
|
|
|
receive channels, then you |
|
|
|
|
|
|
|
must complete the first-time |
Language |
Terms |
Mode |
Network |
Input |
Done |
|
setup menu in order to run a |
|
channel scan. |
||||||
|
|
|
|
|
|
|
|
|
CONGRATULATIONS! |
|
|
|||
|
|
Your TV is now ready to use |
|
|
|
|
|
|
|
|
|
|
Press the [OK] button on your remote |
English United States |
Eastern |
Home Mode |
WiFi |
TV |
if you are fine with the selections that |
|
|
|
|
|
|
|
appear on the screen. Otherwise, |
|
|
|
|
|
|
navigate to the back arrow on the |
|
|
|
|
|
|
screen to change your selection. |
|
|
|
OK |
|
|
|
Language |
Terms |
Mode |
Network |
Input |
Done |
|
|
|
|
|
|
|
|
14
ENGLISH |
FRANÇAIS |
ESPAÑOL |
Shortcuts Instructions
You can use shortcuts on the remote control for fast operation.
Turning your TV on or off
|
To turn your TV on: |
|
|
|
|
1. |
Connect the power cord to the back of the TV, then plug the power cord into an AC outlet. |
||||
2. |
When the TV is powered on, press the |
|
] button on the remote to turn TV. |
||
|
|||||
|
|||||
|
To turn your TV off, press the |
|
] button on the remote. |
||
|
|
||||
|
|
||||
NOTES
•When your TV is in standby mode, it is still consuming power. To completely disconnect power, please remove the plug from the AC outlet.
•If your TV does not receive an input signal for several minutes, it automatically goes into standby mode.
Selecting the input source
Select the Input Source depending on the video device you have connected to your TV.
To select the input source:
1.Turn on your TV, then press the [INPUT] button on the remote, the list of Source appears.
2.Press the [< / >] buttons to select the input source.
3.Press the [OK] button to confirm your selection.
Using the Live TV
To view broadcast programs, press the [Live TV] button on your remote.
Channel search guide
When you select TV as input, if no TV channels were saved before, you will be prompted to do a channel search. Before channel tuning could start, you must specify the Tuner Mode, Antenna or Cable. You can also go to Setting menu > Channel to change the channel settings.
Launch Live TV
After channel tuning is done for the first time, the screen will display Live TV operating tips, including: how to start the channel list, how to start channel info and so on.
Vi
OK
list
[OK] |
Show channel list |
||
[ |
v |
] |
View channel info |
|
|
View recent channel |
|
[BACK] |
|||
BACK
15
ENGLISH |
FRANÇAIS |
ESPAÑOL |
Viewing channel information
As you use the [CH+ / CH-] button on your remote to scroll through channels, an information banner appears on the top of the screen.
1 |
2 |
3 |
4 |
5 |
|
5-2 |
Antenna |
AT05 480i |
1/1 unknown 5.1CH |
4:3 |
480i |
CC |
6 |
AT05-2 |
|
10:00 PM |
:00 AM |
|
|
8 |
7 |
|
|
|
|
|
|
|
12:09 AM Thu. 30 Jun |
|
1:00 AM - 4:00 AM |
AT05 480 |
|
|
|
9 |
10 |
The information banner displays the following information:
1.Channel number
2.Lock status
3.Input
4.Program name
5.Show identification
6.Channel name
7.Current date and time
8.Prompt
9.Beginning and end time of the next program
10.Start/Stop time progress bar of the current program
If you are watching a particular channel, you can also press the up arrow button of your remote to view channel information.
Viewing a channel list
After you have done an automatic channel scan (if you’re using an antenna) or are receiving your channels through a cable provider, you can view your list of channels by pressing [OK] on your remote.
You will see the channel list display on the right side of the screen.
Creating a Favorites List
To quickly access your most-watched channels, you can create a Favorites List. To create your Favorites List:
1.Press the [ 
] button on your remote.
2.Press the [ > ] button to display the Settings Menu.
3.Select Channel > Favorites List.
4. Using the [ |
v |
A heart-shaped
/ v ] buttons of your remote, select a channel and press [OK] button.
indicator will appear beside the channel as confirmation that it has been successfully added.
Viewing your Favorite list
To view channels that you’ve added to your Favorites List simply press [OK] on your remote to call out the channel list.
The channel list appears on the right side of the screen and heart-shaped icons are shown next to the channels that make up your Favorites List. You can press [ < / > ] buttons to switch the channel list (Antenna or Cable) and Favorite list.
16
ENGLISH |
FRANÇAIS |
ESPAÑOL |
Basic Settings
Your SHARP TV comes with many TV setting features to allow you to customize the picture based on your viewing preference and environment. As you navigate throughout different screens to access settings, some of the indicators
appear as words On and Off and some are open |
and closed |
symbols. An |
indicator signifies a feature that is |
disabled. |
|
|
|
Using the Settings Menu
You can press the ] button to access the Quick Settings Menu, then press the [ > ] button on the D-pad to view the
Settings Menu.
The Settings Menu consists of the following settings:
•Picture
•Sound
•Channel
•Network
•System
•About TV
In each menu, you can:
Press the [ |
v |
/ v ] buttons to select an item. |
Press the [OK] buttons to enter the submenu.
Press the [ < / > ] buttons to adjust the value.
Press the [BACK] button to return to the previous menu. Press the [EXIT] button to exit the menu.
Settings
|
Picture Mode |
|
Picture |
Standard |
|
|
Brightness |
|
Sound |
50 |
|
|
Contrast |
|
Channel |
50 |
|
Color |
||
|
||
Network |
50 |
|
Aspect Ratio |
||
|
||
System |
Auto |
|
Backlight |
||
About TV |
||
Advanced Picture Settings |
||
|
||
|
Restore Defaults |
17
ENGLISH |
FRANÇAIS |
ESPAÑOL |
Picture Menu
Picture Mode: If you’d like to configure the settings for your picture, then there are six types of picture modes available: Vivid, Standard,
Theater, Energy Saving, Game and Sport.
Once you choose the mode, you can adjust the picture based on the following settings:
Brightness: Adjust the Brightness level to generate lighter or darker images.
Contrast: Adjust the Contrast level to increase or decrease how bright images appear.
Settings
|
Picture Mode |
|
Picture |
Standard |
|
|
Brightness |
|
Sound |
50 |
|
|
Contrast |
|
Channel |
50 |
|
Color |
||
|
||
Network |
50 |
|
Aspect Ratio |
||
|
||
System |
Auto |
|
Backlight |
||
About TV |
||
Advanced Picture Settings |
||
|
||
|
Restore Defaults |
Color: Adjust the color intensity of the picture for a more vibrant image.
Aspect Ratio: Adjust the Aspect Ratio to stretch or zoom in on your picture. You can choose from the following settings: Normal, Zoom, Wide, Cinema, 1:1 PIXEL MAP, Panoramic, Direct or Auto.
Backlight: Some models have a Dynamic Backlight Control setting that you can turn Off and set to High or Low. Some models have a Local Dimming setting is available that will enable the TV to automatically adjust the backlight by sections according to the changes in image and increase the contrast. The Backlight setting enables you to adjust how bright you want images to appear. In addition, an ECO Sensor setting is available that will enable the TV to automatically adjust the picture settings according to the amount of ambient light in your room. The Minimum Backlight setting enables you to adjust how bright you want images to appear. This is a money-saving feature because it reduces power consumption.
Advanced Picture Settings: Adjust advanced picture settings based on your viewing preference.
•Display: Adjust advanced picture settings in the component source.
•Overscan: Change the video size settings slightly crop the edges of the displayed image.
•Tint: Adjust the colors from a green to magenta tint to view the natural skin tones of people on the screen.
•Sharpness: Adjust how sharp or soft edges of images appear.
•Ultra Smooth Motion: This setting minimizes afterimages that are left on the screen when viewing fast-moving objects. You can adjust it from Off, Clear, Standard or Smooth. A Smooth setting will produce a smoother picture whereas a Clear setting will result in a picture that has less judder (shaking).
NOTE
• Some models don’t support this function.
•Noise Reduction: Improve how clear the picture appears by reducing noise.
•Adaptive Contrast: Automatically darken dark areas and lighten light areas of images to see more details.
•Color Temperature: Select a preset color temperature.
•White Balance: Adjust the intensity of red, green and blue lights to view the true colors of all images in the picture.
•Color Tuner: Adjust the Hue, Saturation and Brightness of color settings.
Restore Defaults: Restore all the picture settings in the current picture mode to the factory default values.
18
ENGLISH |
FRANÇAIS |
ESPAÑOL |
Sound Menu
Sound Mode: Select a preset sound mode to suit the type of content you are listening to: Standard, Theater, Music, Speech and Late Night.
Once you choose the mode, you can adjust the audio based on the following settings:
Audio Enhancements: dbx-tv’s Total Technology™ delivers the best possible TV sound for your TV.
Settings
|
Sound Mode |
|
Picture |
Standard |
|
Sound |
Audio Enhancements |
|
Advanced Audio Settings |
||
Channel |
||
Restore Defaults |
||
Network |
||
|
||
System |
|
|
About TV |
|
•
Total Sonics: Optimizes overall sound quality by increasing bass, making dialog clear and natural, and widening the sound field.
•
Total Surround: Provides surround sound experience with psycho-acoustic processing to place sounds beside, behind, and above the viewer. For best results use with Total Sonics.
•
Total Volume: Maintains consistent loudness levels from wide dynamic range programs, too-loud commercials, and channel or input changes.
Advanced Audio Settings: Tune the audio settings and quality of the TV.
•Equalizer: Boost the volume at different frequencies.
•Lip Sync: Synchronize the displayed image with the audio output.
•Balance: Adjust the left and right speaker strength to optimize audio for a specific location.
•Digital Audio Out: Select the digital audio output format that best suits the audio device type. For example, choose RAW (which is uncompressed audio in RAW form) if you have 5.1 Channel Surround Sound Speaker set up. Choose PCM if you have an amplifier that does not support Dolby Digital technology.
•Digital Audio Delay: Adjust the digital audio output delay time to sync sound from an external speaker with the images on the TV.
•TV Speaker & ARC: Select the TV speaker or an external speaker for sound output.
•Audio Out: Change the way audio is sent through the type of device that’s connected to your TV Audio Out port.
Restore Defaults: Restore all of the audio settings in current audio mode to the factory default values.
Channel Menu
Tuner Mode: Select if you receive TV channels over the air (antenna) or through a cable set top box as the input will be used during a channel scan.
Auto Channel Scan: Automatically scan for channels to view programming from your TV source.
Channel Skip: Skip a channel that your TV picked up during a previous channel scan search.
Favorites List: Quickly access your most-watched channels by creating a Favorites list.
Settings
|
Tuner Mode |
|
Picture |
Antenna |
|
Sound |
Auto Channel Scan |
|
Channel Skip |
||
Channel |
||
Favorites List |
||
Network |
||
|
||
System |
|
|
About TV |
|
19
ENGLISH |
FRANÇAIS |
ESPAÑOL |
Network Menu
Network Configuration: Set up the network to gain full access of Smart TV features.
When the Connection Type is Ethernet, means you choose a wired network connection to access the Internet.
•Ethernet: Display the network connection status.
•IP Setting Mode: Configure the IP setting for your network connection.
When the Connection Type is Wireless, means you choose a wireless network connection to access the Internet.
Settings
Picture |
Network Configuration |
|
Network Information |
||
|
||
Sound |
Disconnected |
|
Anyview Stream |
||
|
||
Channel |
On |
|
TV Name |
||
|
||
Network |
Smart TV |
|
|
||
System |
|
|
About TV |
|
•Advanced Settings: Configure the advanced wireless network settings for the TV.
•Available Networks: Select an available network to connect. And you can also add wireless network or refresh wireless network.
When the Connection Type is Off, means you turn off the Internet connection. 
Network Information: View information about your network connection.
Anyview Stream: Share video, music or other content files from another device to your TV screen.
TV Name: Choose a name for your TV. The name will be shown to devices that are available for sharing data.
System Menu
Location: Choose the location from where you will watch your TV. 
Time: Set the current time based on your location.
•Time Zone: Select your time zone.
•Time Format: Set the time to display in a 12 or 24-hour format.
•Daylight Savings: Select whether to apply Daylight Savings Time to the TV.
Settings
Picture
Sound
Channel
Network
System
About TV
• Date/Time: Set the Date and Time.
• Power On Timer: Enable the Power On Timer to Off, Once or Daily.
• Power Off Timer: Enable the Power Off Timer to Off, Once or Daily.
• Sleep Timer: Set the sleep timer to automatically turn the TV Off within a specified time: Off, 10 Minutes, 20 Minutes, 30 Minutes, 40 Minutes, 50 Minutes, 60 Minutes, 90 Minutes and 120 Minutes.
Language: Adjust the Menu Language and Preferred Audio Language for the TV.
Parental Controls: Turn On Parental Controls to block children from being able to view certain programs. The default password is 0000. For more information about Parental Controls, See Parental Controls on page 22.
Application Settings: Set settings for apps on your TV.
•Netflix: Remove this TV from your Netflix account. Please contact Netflix if you want to stop being billed for you service.
•ESN: Display the Netflix Electronic Serial Number.
•VUDU: Remove this TV from your VUDU account. Please contact VUDU if you want to stop being billed for you service.
20
ENGLISH |
FRANÇAIS |
ESPAÑOL |
Closed Caption: Adjust Closed Captioning settings.
• Analog Caption: Select an Analog Caption setting from Off, CC1-CC4, Text 1-TEXT4.
CC1-CC4: Closed captioning appears in a small banner across the bottom of the screen. CC1 is usually the “printed” version of the audio. CC2-CC4 display content are provided by the broadcaster.
Text1-Text4: Closed captioning that covers half or all of the screen. Text1-Text4 display content are provided by the broadcaster.
Off: To turn off the Analog Caption.
•Digital Caption: Select a Digital Caption setting: Off, CS1-CS6.
•Digital CC Settings: There are two caption styles. One is the Automatic function set as the broadcaster, while the other is the Custom style where you can adjust the Size, Font, Text Color, Text Opacity, Background Color etc.
HDMI Function: Configure how to control CEC-enabled devices with your TV remote.
•CEC & MHL Control: Allow HDMI devices to control each other.
•Device Auto Power Off: Automatically turn off HDMI CEC devices when the TV is turned off .
•TV Auto Power On: Allow the TV to turn On with CEC-enabled devices.
•Device Connect: Allow CEC-enabled devices to communicate with each other when connected through an HDMI cable.
•CEC Device Lists: View a list of all CEC-enabled devices.
NOTES
•HDMI cables must be used to connect HDMI CEC-compatible devices to your TV.
•The HDMI CEC feature of the connected device must be turned on.
•If you connect an HDMI device that is not HDMI CEC-compatible, all the HDMI-CEC Control features do not work.
•Depending on the connected HDMI device, the HDMI-CEC Control feature may not work.
Advanced Settings: Access the Advanced Settings menu.
•Menu Timeout: Set the amount of time that you’d like for the menu to display : 10s, 20s , 30s , 60s or Off.
•Use Mode: Set the TV to use in Home or Store Mode (Some models have a Store Mode with 4K Video).
•Input Labels: Edit the input labels.
•Default LiveTV Source: Select the default input selected by the remote control Live TV button.
•Setup Wizard: Use the Setup Wizard for instructions to help you set up your TV.
•Power Indicator: Set the Power Indicator to illuminate when the TV is turned off.
About TV Menu
System Information: View system information.
Legal Disclaimer: Read the Legal Disclaimer.
Auto Firmware Upgrade: Set your TV to automatically receive the latest firmware.
Check Firmware Upgrade: Check to ensure that your TV has received the latest firmware.
Restore To Factory Default: Restore your TV back to the factory default.
Settings
Picture |
System Information |
|
Legal Disclaimer |
||
Sound |
||
Auto Firmware Upgrade |
||
|
||
Channel |
On |
|
Check Firmware Upgrade |
||
Network |
||
Restore To Factory Default |
||
System |
||
|
||
About TV |
|
21
ENGLISH |
FRANÇAIS |
ESPAÑOL |
Parental Controls
The Parental Controls setting allows you to block content that is not appropriate for children to watch. You can do this by creating a 4-digit password. The factory-default password is 0000.
Turning Parental Controls On
1.Press the [ 
] button on your remote.
2.Press the [ > ] button to display the Settings Menu.
3.Select System > Parental Controls.
4.Press the [OK] button on your remote, an Enter PIN window displays. Using the numerical keypad on your remote, enter the factory-default password 0000 and press [OK].
5.Go to Locks.
6.Press the [OK] button to turn the locks On.
You will see the other Parental Control settings change from a greyed out state and become highlighted. When this occurs, begin adding other settings to the Block Time, Channel Block, Program Block, Input Block, Change PIN or Restore Parental Control Defaults features.
Block Time: Block certain channels and programs during certain periods of time.
Channel Block: Block programs by channels when you turn on the Parental Controls feature.
Program Block: Block programs according to their TV or MPAA (movie) rating when you have turned on the Parental Controls feature and selected that rating to be blocked.
Input Block: Block content from devices that are connected to certain TV ports.
Change PIN: Change your PIN that you use to access Parental Controls. If you want to change your parental control password, first enter the new password then enter the same password again.
NOTE
• If you forget your password, call the SHARP Consumer Electronics Care Center.
Restore Parental Control Defaults: Restore Parental Controls back to the factory setting.
Description of U.S. TV Ratings
Content |
Defined as |
A |
All |
D |
Suggestive dialog |
L |
Course or crude language |
S |
Sexual situations |
V |
Violence |
FV |
Fantasy Violence |
Description of Age-based Ratings |
|
Age |
Defined as |
TV-Y |
All children |
TV-Y7 |
Directed to older children |
TV-G |
General audience |
TV-PG |
Parental Guidance Suggested |
TV-14 |
Parents strongly cautioned |
TV-MA |
Mature Audiences Only |
22
ENGLISH |
FRANÇAIS |
ESPAÑOL |
U.S. Movie Ratings
Rating |
Defined as |
||
G |
General audience |
|
|
PG |
Parental Guidance suggested |
|
|
PG-13 |
Parents strongly cautioned |
|
|
R |
Restricted |
|
|
NC-17 |
No one 17 and under permitted |
|
|
X |
A rating that has now been superseded by NC-17 |
|
|
Canadian English Ratings |
|||
Rating |
Defined as |
||
C |
Children |
|
|
C8+ |
Children 8 years and older |
|
|
G |
General programming that is suitable for all audiences |
|
|
PG |
Parental Guidance |
|
|
14+ |
Viewers 14 years and older |
|
|
18+ |
Adult Programming |
|
|
Canadian French Ratings |
|||
Rating |
Defined as |
||
G |
General (appropriate for all ages and must contain little to no violence or sexual content) |
||
8ans+ |
General but inadvisable for young children(could contain scenes disturbing to children under eight). |
||
Recommended for viewing with parent. |
|||
|
|||
13ans+ |
Programming is appropriate for children 13 and older and may contain moderate violence, language |
||
and some sexual situations. |
|||
|
|||
16ans+ |
Recommended for children 16 and older and may contain strong violence, language and sexual |
||
content. |
|||
|
|||
18ans+ |
Programming intended for viewers that are 18 and older. Programming may contain extreme violence |
||
and graphic sexual content/pornography. |
|||
|
|||
NOTE
•All ratings that are higher than those you select are also blocked. For example, if you choose to block the PG-13 rating, then the higher ratings (R and NC-17) are automatically blocked too.
23
ENGLISH |
FRANÇAIS |
ESPAÑOL |
Advanced TV Settings
Getting familiar with the Home screen
The simple design of the Home screen menu makes it easy to navigate. It serves as the central location to access Top Apps, Recommendation, History, Media, Apps or Inputs on the back of the TV that you’ve connected external devices to.
To access the Home screen, press the ] button on your remote control and use the arrows on the D-pad to make your selection.
Indicators and Icons on the top of the Home screen
You can always view the current time in the top right corner of the Home screen.
If your TV is connected to the Internet through a wireless connection, then an icon will display in the top right corner of the screen. This location makes it very convenient for you to determine if you still have Internet connectivity as you
use the TV.
If your TV is connected to the Internet, then the weather current conditions will display in the top right conner of the screen.
In addition, if you have connected a device (such as a thumb drive) to a USB port and your TV recognizes it, then a device icon will also display in the same area.
Names of sections that appear on the Home screen
The Home screen displays the following section names:
•Top Apps
•Recommendation
•History
•Inputs
•Media
•Apps
Inputs
Each time you access the Home screen, the icons for your inputs will display on the screen. Inputs that you have connected an external device to will be highlighted. Inputs that do not have an external device connected to are greyed out.
24
ENGLISH |
FRANÇAIS |
ESPAÑOL |
Media
Media is a central location for you to view or listen to different types of content (for example, your photos, music and movies) through the following methods:
•A USB thumb drive or hard drive
•Compatible mobile phone, tablet or other personal device: You can stream movies, music and photos that are stored on Compatible personal device and play or view the content on your TV.
When you connect your thumb drive or other personal device to the TV, the TV automatically detects it and displays a device icon in the top right corner of the Home screen.
Panels that appear on the Media screen
The Media screen displays four panels: Picture, Video, Music and All.
File formats that may be supported
NOTE
•Due to differences in programming tools and other factors, some of the file formats that are listed may or may not be supported.
Medium File Format
Video .avi (MPEG2, Divx), .mkv (Divx), .mpeg (MPEG2), .wmv (Divx, XviD)
Picture .JPG
Music .mp3
Browsing Content
To browse through content based on the type that you wish to access:
1.Navigate to the appropriate menu tab on the left side of the screen and select Music, Video, Picture or All. The library of items displays on the right side of the screen.
2.Navigate to the right side of the screen and click on the name of the folder that contains your content.
3.Make your selection to play or view the content.
If you want to close out of the Media center, then press the [EXIT] button on your remote.
Viewing Pictures as a Slideshow
To view pictures in a slideshow:
1.Navigate to the Picture tab.
2.Click on Start the Slideshow.
The slideshow of your pictures begins to play. To stop the slideshow, press the [OK] button on your remote and press it again to restart it.
Viewing Video
While viewing video you will see a number of icons appear at the bottom of the screen. You can use the navigation buttons of your remote to select these icons that will control the video.
25
ENGLISH |
FRANÇAIS |
ESPAÑOL |
Apps
Numerous factory-installed apps are available for you to choose from for your entertainment preferences.
Installing an App
Even though your TV has numerous factory-installed apps, there may be others that you’d like to download. To install an app:
1.From the Home screen, click on the Opera TV Store icon.
2.Navigate to the Search tab at the top of the screen.
3.Begin typing the name of the app. As you begin typing the first two to three letters the Opera Store suggests words to quicken your search time.
4.Use the navigation buttons of your remote to select the app. A page displays that shows a written description of the app.
5.Click on OPEN or ADD TO FAVORITES.
Removing an App
You can only delete apps that you’ve downloaded to the TV. Factory-installed apps can not be deleted. To delete an app:
1.From the Apps screen, click on the Edit icon.
2.Use the navigation buttons on your remote to select the app that you want to remove.
NOTE
• The app which has a 
icon at the upper right conner can be removed.
3.Press the [OK] button on your remote. A dialog message displays that asks if you’re sure you want to remove the app.
4.Click on OK. A confirmation message displays and the icon is removed from the Apps list screen.
NOTE
• If an app is deleted,the information related to that app is also removed.
5.Use the navigation buttons to select the Complete icon.
Moving App Icons around
Apps can not be moved around on the screen.
Customizing the name of your TV
If you have several TV’s in your home then you may want to customize the name of your TV. By giving your TV a name, it will make it easier for you to identify it when connecting devices to the TV to stream or mirror content.
To customize the name of your TV:
1.Press the [ 
] button on your remote.
2.Press the [ > ] button to display the Settings Menu.
3.Go to Network > TV Name.
4.Select User Input to bring up the keyboard and begin typing the name.
5.When you are finished, power off the TV and power it back on for the change to take effect.
26
Loading...