Sharp LC-32D53X, LC-37D53X Operating Manual
MODEL
LC-32D53X
LC-37D53X
LCD COLOUR TELEVISION
OPERATION MANUAL
Blank page
LC-32D53X
LC-37D53X
LCD COLOUR TELEVISION
OPERATION MANUAL
Dear SHARP customer
Thank you for your purchase of the SHARP LCD colour TV product. To ensure safety and many years of
trouble-free operation of your product, please read the Important Safety Precautions carefully before
using this product.
Contents
Dear SHARP customer ........................................... 1
Contents .................................................................. 1
Trademarks ............................................................. 2
Important Safety Precautions ............................... 3
Supplied accessories ............................................. 4
Preparation ............................................................. 5
Inserting the batteries ......................................... 5
Using the remote control unit .............................. 5
Cautions regarding remote control unit ........... 5
Attaching the stand ............................................. 6
Setting the TV ..................................................... 7
Basic connection ................................................ 8
Connecting to an antenna .............................. 8
Connecting to the AC outlet ........................... 8
Setting the TV on the wall ................................... 9
Removing the stand ............................................ 9
Part names ............................................................ 10
TV (Front) .......................................................... 10
TV (Rear) ........................................................... 11
Remote control unit .......................................... 12
Watching TV .......................................................... 13
Turning on the power ........................................ 13
Turning off the power ........................................ 13
Simple button operations for changing
channels ......................................................... 13
Using Flashback (A) on the remote
control unit ..................................................... 14
Using MPX on the remote control unit ............... 14
Simple button operation for changing
volume/sound ................................................ 15
Sleep timer ....................................................... 15
ANALOG/DTV/RADIO buttons .......................... 16
Basic adjustment settings ................................... 17
Menu operation buttons .................................... 17
On-Screen Display ............................................ 17
Menu items (TV/DTV/AV) .................................. 18
Menu items (PC) ............................................... 18
Auto installation ................................................ 19
Programme setup ............................................. 19
Auto search .................................................. 19
Manual setting for each channel ................... 20
Search tuning .......................................... 20
Fine tuning ............................................... 20
Colour system ......................................... 20
Sound system (Broadcasting system) ...... 21
Skipping channels ................................... 21
Sort .............................................................. 21
Label ............................................................ 22
Erase Programme ........................................ 22
AV MODE selection .......................................... 23
OPC (Optical Picture Control) setting ................ 23
Picture adjustments .......................................... 24
Advanced ......................................................... 25
Colour temperature ...................................... 25
Fine Motion Advanced .................................. 25
Film Mode .................................................... 25
Black ............................................................ 25
3D-Y/C ........................................................ 26
Monochrome ............................................... 26
Audio adjustment .............................................. 26
Surround ...................................................... 27
Power Control .................................................. 27
1
Contents
Basic adjustment settings (Digital) ......................29
DTV input mode menu items..............................29
Selecting DTV mode ..........................................29
EPG ...................................................................30
Selecting a programme using EPG ....................30
Programme Guide .............................................32
Info ....................................................................32
Favourite Programme List ..................................32
Programme List .................................................33
Favourite & Lock ................................................33
Parental Rate .....................................................33
Installation .........................................................34
Auto Search .......................................................34
Manual Adjust ....................................................34
Quick Search .....................................................35
Reset Data .........................................................35
Video Setup .......................................................35
Digital Output .....................................................36
Multilingual .........................................................36
Time Setup ........................................................37
I-Plate Setup (Information Plate Setup) ...............37
Information ........................................................37
Useful adjustment settings .................................. 38
Password setting for child lock
(for TV/DTV input mode) ................................ 38
Input Skip ......................................................... 39
Input Label ........................................................ 39
Image position .................................................. 40
Wide Screen Signalling (WSS) ........................... 40
Picture aspect ratio ........................................... 41
Standby Mode .................................................. 41
Reset ................................................................ 42
WIDE mode (for TV/AV input mode) .................. 43
WIDE mode (for PC input mode) ....................... 44
Language setting for on-screen display ............. 45
Demo ................................................................45
DNR (Digital Noise Reduction) ........................... 46
Input Select ...................................................... 46
Output Volume Select ....................................... 47
Audio Only ........................................................ 47
Game Play Time ............................................... 48
Colour system setting ....................................... 48
HDMI Setup ...................................................... 49
PC Setup .......................................................... 49
Input Signal (PC input mode only) ..................49
Adjusting the PC image automatically ............50
Adjusting the PC image manually ..................50
Useful features ..................................................... 51
Dual screen functions ........................................51
Teletext function ............................................... 52
Teletext language setting .................................. 54
Freezing images .................................................54
Output Select ....................................................54
Using external equipment .................................... 55
Displaying an external equipment image .......... 55
Displaying a DVD image (Example) ................... 55
Connecting a VCR ........................................... 55
Connecting a DVD player ................................. 56
Connecting a game console or camcorder ....... 57
Connecting a STB (Satellite, Cable, etc.) ........... 57
Viewing an image from a PC ............................. 58
Connecting a PC .......................................... 58
Displaying an image from a PC ..................... 58
Appendix ............................................................... 59
Troubleshooting ................................................ 59
Troubleshooting (DTV) ...................................... 59
RS-232C port specifi cations ............................. 60
PC compatibility chart ....................................... 61
Specifi cations ................................................... 62
Optional accessory ........................................... 62
Dimensional drawings.......................................... 63
Trademarks
• The DVB logo is the registered trademark of the Digital Video Broadcasting - DVB - project.
• Manufactured under license from Dolby Laboratories.
• “HDMI, the HDMI logo and High-Defi nition Multimedia Interface are trademarks or registered trademarks of HDMI
Licensing LLC.”
2
Important Safety Precautions
• Cleaning — Unplug the AC cord
from the AC outlet before cleaning
the product. Use a damp cloth to
clean the product. Do not use liquid
cleaners or aerosol cleaners.
• Water and moisture — Do not use
the product near water, such as
bathtub, washbasin, kitchen sink,
laundry tub, swimming pool and in a
wet basement.
• Do not place vases or any other
water-fi lled containers on this
product.
The water may spill onto the product
causing fi re or electric shock.
• Stand — Do not place the product
on an unstable cart, stand, tripod
or table. Doing so can cause the
product to fall, resulting in serious
personal injuries as well as damage
to the product. Use only a cart,
stand, tripod, bracket or table
recommended by the manufacturer
or sold with the product. When
mounting the product on a wall, be
sure to follow the manufacturer's
instructions. Use only the mounting
hardware recommended by the
manufacturer.
• The LCD panel used in this product
is made of glass. Therefore, it can
break when the product is struck
forcefully or with a sharp object. If
the LCD panel is broken, be careful
not to be injured by broken glass.
• Heat sources — Keep the product
away from heat sources such as
radiators, heaters, stoves and other
heat-generating products (including
amplifi ers).
• To prevent fi re, never place any type
of candle or naked fl ames on the
top or near the TV set.
• To prevent fi re or shock hazard, do
not place the AC power cord under
the TV set or other heavy items.
• Do not place heavy objects on this
product or stand on it. Doing so
could cause injury if the product
overturns. Take special care near
children and pets.
• When relocating the product
placed on a cart, it must be moved
with utmost care. Sudden stops,
excessive force and uneven fl oor
surface can cause the product to fall
from the cart.
• Ventilation — The vents and other
openings in the cabinet are designed
for ventilation. Do not cover or block
these vents and openings since
insuffi cient ventilation can cause
overheating and/or shorten the life
of the product. Do not place the
product on a bed, sofa, rug or other
similar surface, since they can block
ventilation openings. This product is
not designed for built-in installation;
do not place the product in an
enclosed place such as a bookcase
or rack, unless proper ventilation
is provided or the manufacturer's
instructions are followed.
The LCD panel is a very high technology product
with 3,147,264 thin fi lm transistors, giving you fi ne
picture details.
Due to the very large number of pixels, occasionally
a few non-active pixels may appear on the screen
as a fi xed point of blue, green or red.
This is within product specifi cations and does not
constitute a fault.
Precautions when
transporting the TV
Be sure to always carry the TV
by two people holding it with two
hands — one hand on each side
of the TV.
• Do not display a still picture for a long time, as this could
cause an afterimage to remain.
• Install the product on the place where the AC cord can
be unplugged easily from the AC outlet, or from the AC
INPUT terminal on the rear of the product.
3
Supplied accessories
Make sure the following accessories are provided with the product.
Remote control unit “AAA” size battery (g2) AC cord
Page 12 Page 5 Page 7
AC cord clamp Cable clamp
Page 7 Page 7
Stand base Stand post
Cloth
Short screws (g4)
Hex key
Cable tie
Page 7
Operation manualStand unit
Long screws
(g4)
Page 6
NOTE
• Always use the AC cord supplied with the TV.
• The illustrations and on-screen displays in this operation manual are for explanation purposes and may vary slightly from the
actual operations.
• The illustrations used throughout this manual are based on LC-37D53X.
4
Preparation
Inserting the batteries
Before using the TV for the fi rst time, insert two “AAA” size batteries (supplied). When the batteries become
depleted and the remote control fails to operate, replace the batteries with new “AAA” size batteries.
1 Open the battery cover.
CAUTION
Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below.
• Do not mix batteries of different types. Different types of batteries have different characteristics.
• Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or cause chemical
leakage in old batteries.
• Remove batteries as soon as they have worn out. Chemicals that leak from batteries can cause a rash. If you fi nd any
chemical leakage, wipe thoroughly with a cloth.
• The batteries supplied with this product may have a shorter life expectancy due to storage conditions.
• If you will not be using the remote control unit for an extended period of time, remove the batteries from it.
2 Insert two supplied “AAA” size
batteries.
• Place batteries with their terminals
corresponding to the (e) and (f)
indications in the battery compartment.
3 Close the battery cover.
Using the remote control unit
Use the remote control unit by pointing it towards the
remote sensor window.
Objects between the remote control unit and sensor
window may prevent proper operation.
Remote control
sensor
Cautions regarding remote control unit
• Do not subject the remote control unit to shock.
In addition, do not soak the remote control unit with liquids, or place it in an
area with high humidity.
• Do not install or place the remote control unit under direct sunlight.
The heat may cause deformation of the unit.
• The remote control unit may not work properly if the remote sensor window
of the TV is under direct sunlight or strong lighting. In such case, change the
angle of the lighting or TV, or operate the remote control unit closer to the
remote sensor window.
5 m
30°30°
5
Preparation
Attaching the stand
• Before attaching (or detaching) the stand, unplug the AC cord from the AC INPUT terminal.
• Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being
damaged.
CAUTION
• Attach the stand in the correct direction.
• Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.
Confi rm the 8 screws supplied with the TV.
1 3
2
Short screws (g4)
(used in step 2)
Set the post for the stand unit onto the
1
box.
Attach the base to the post.
2
Insert and tighten the 4 screws into the 4
3
holes on the bottom of the base.
Hex key
Screw
Long screws (g4)
(used in step 3)
• To detach the stand, perform the steps in reverse order.
Insert the stand into the openings on the
1
bottom of the TV.
Insert and tighten the 4 screws into the 4
2
holes on the rear of the TV.
Hex key
Screw
NOTE
Soft cushion
6
Preparation
Setting the TV
Notes on installing the TV
• Avoid direct sunlight and place the TV in a well-ventilated location.
• Place the TV in a level location.
Connecting the AC cord, antenna, and external equipment to the TV
1
TV (rear view)
AC cord clamp
See pages 8 and 55—58 for
connecting antennas and
external equipment, such
as VCR and DVD player.
AC outlet
AC cord
• Place the TV close to the AC outlet, and keep the power plug within reach.
Bundling the cables
2
Insert the cable clamp in the hole on the TV as shown.
Cable clamp
Cable tie
CAUTION
• TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT TOUCH UN-INSULATED PARTS OF ANY CABLES WITH THE
AC CORD CONNECTED.
7
Preparation
Simple operations for watching a TV programme
Basic connection
Connecting to an antenna
To enjoy a clearer picture, use an outdoor antenna. The following is a brief explanation of the types of connections
that are used for coaxial cable.
Standard DIN45325 plug (IEC169-2)
75-ohm coaxial cable (round cable)
(commercially available)
To antenna terminal
Room antenna terminal
(75-ohm type)
Connecting to the AC outlet
Antenna cable
Rear view
AC outlet
AC cord
NOTE
• Always turn off the power of the TV when connecting the AC cord.
• Disconnect the AC cord from the AC outlet if the TV will not be used for a long period of time.
8
Preparation
Setting the TV on the wall
• You can mount the TV on the wall, using the optional AN-37AG2 bracket.
• For details, refer to the instructions supplied with the optional bracket.
CAUTION
• This TV should be mounted on the wall only with the AN-37AG2 (SHARP) wall mount bracket. The use of other wall
mount brackets may result in an unstable installation and may cause serious injuries.
• Installing the Liquid Crystal Television requires special skill that should only be performed by qualifi ed service
personnel. Customers should not attempt to do the work themselves. SHARP bears no responsibility for improper
mounting or mounting that results in accident or injury.
<Example>
Hanging on the wall
AN-37AG2 wall mount bracket.
(See the bracket instructions for details.)
Regarding the angle when
mounting the TV on the wall
• The maximum angle to which you
can tilt the wall-mounted TV is as
follows. Do not tilt it more than the
maximum angle.
LC-32D53X
LC-37D53X
0°, 5°, 10°
0°, 5°
• Tilt the wall-mounted TV slowly
Vertical mounting
Angular mounting
when adjusting its angle.
Removing the stand
For wall mounting with the optional bracket, remove the stand.
Before detaching/attaching the stand
• Before detaching (or attaching) the stand, unplug the AC cord from the AC outlet.
• Remove all terminal covers and connected cables.
• Lay the TV down on cushioning (such as a blanket) over a table.
• Make sure two or more people perform the operation.
CAUTION
• Do not remove the stand from the TV unless using an optional bracket to mount it.
1
Hex key
Unfasten the four screws used to secure the stand in
place.
NOTE
• To attach the stand, perform the above steps in reverse order.
2
Detach the stand from the TV.
(Hold the stand so it will not drop from the edge of
the base area.)
9
Part names
TV (Front)
Channel up (r)/down (s) buttons
Volume up (e)/down (f) buttons
TV/VIDEO button
POWER (On/Off) button
Remote control sensor
OPC sensor
POWER indicator
10
OPC indicator*
SLEEP timer indicator
*OPC: Optical Picture Control
(See page 23.)
Part names
TV (Rear)
INPUT 4 (HDMI) terminal
INPUT 3 (HDMI) terminal
RS-232C terminal
INPUT 5 terminals
Headphone jack
DIGITAL AUDIO OUTPUT terminal
INPUT 2 terminals
INPUT 1 terminals
Antenna input terminal
AUDIO OUTPUT terminal
Regarding the headphone jack
• Use headphones with a stereo mini plug (Ø 3.5 mm).
• Be sure to unplug headphones from the jack when they are not
in use.
• The speakers do not output volume when headphones are
plugged in.
• Audio adjustments (page 26) do not affect the audio of
connected headphones.
• You can set the volume to different levels for each input source.
AC INPUT terminal
Volume display when headphones are plugged in
20
11
Part names
Remote control unit
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
NOTE
• When using the remote control unit, point it at the TV.
1 POWER (STANDBY/ON)
To switch the power on and off. (See page 13.)
2 0 — 9
TV/DTV/External input mode: Set the channel. (See page 13.)
TELETEXT mode: Set the page. (See pages 13, 52 and 53.)
3 A (Flashback)
Press to return to the previous channel or external input mode.
(See page 14.)
4 ATV
Press to access ANALOG mode. (See page 16.)
DTV
Press to access DTV mode. (See page 16.)
RADIO
Press to access RADIO mode. (See page 16.)
5 MPX
Select the sound multiplex mode. (See page 14.)
16
17
18
19
20
21
22
23
24
25
26
27
28
6 e (Mute)
Mute the sound. (See page 15.)
7 VOLk/VOL
Set the volume. (See page 15.)
8 GUIDE
DTV mode: Display the programme list. (See page 32.)
9 EPG
DTV: To display EPG (Electronic Programme Guide) screen. (See
page 30 to 31.)
10 a/b/c/d (Cursor)
Select a desired item on the setting screen. (See pages 17 and 29.)
ENTER
Execute a command.
11 EXIT
Turn off the On-Screen Display.
12 DEMO
Press to show Fine Motion Advanced demostration in a split
screen format. (See page 45.)
13 OPC
To switch Optical Picture Control on and off. (See page 23.)
14 WIDE
Change the wide image mode. (See pages 43 and 44.)
15 FREEZE
Freeze a motion picture on the screen. (See page 54.)
16 m (TELETEXT)
ANALOGUE mode: Select the TELETEXT mode. (all TV image, all
TEXT image, TV/TEXT image) (See pages 52 and 53.)
DTV mode: Select the TELETEXT mode. (all TV image, TEXT image)
(Reveal hidden for TELETEXT)
k
TELETEXT mode: Display hidden characters. (See page 52.)
(SUBTITLE for TELETEXT)
[
TV/INPUT mode: To turn the subtitles on and off. (See page 53.)
(Hold)
3
TELETEXT mode: Stop updating Teletext pages automatically.
Press 3 again to release the hold mode. (See pages 52 and 53.)
(Subpage)
1
TELETEXT mode: Display the Teletext subpage directly. (See
page 53.)
(Top/Bottom/Full)
v
TELETEXT mode: Set the area of magnifi cation. (See page 52.)
17 TV/VIDEO (INPUT SOURCE)
Select an input source. (TV, DTV, INPUT 1, INPUT 2, INPUT 3,
INPUT 4, INPUT 5) (See pages 39, 46, 55 and 58.)
18 FAV.
DTV mode: Display the favourite programme list. (See pages 32.)
19 DISPLAY
Display the channel or input information.
TELETEXT mode: Display the time information included in the
Teletext broadcast. (See page 53.)
20 SLEEP
Set the Sleep timer. (See page 15.)
21 CHr/CH
TV/DTV input mode: Select the channel. (See page 13.)
TELETEXT mode: Select the page. (See pages 52 and 53.)
22 INFO
DTV mode: Display the programme information. (See page 32.)
23 MENU
Display the menu screen. (See page 17.)
24 RETURN
MENU mode: Return to the previous menu screen. (See pages 17
and 29.)
25 Colour (Red/Green/Yellow/Blue)
TELETEXT mode: Select a page. (See page 52.)
26 AV MODE
Select an audio and video setting. (See page 23.)
27 SELECT
To select either screen to be active in Dual screen mode.
28 P&P
Set the dual picture mode. Press P&P again to return to normal
view. (See page 51.)
l
s
12
Watching TV
Turning on the power
Press POWER on the TV.
• POWER indicator (Green): The TV is on. (After a few
seconds, an image appears with sound.)
• After turning the power “ON” by pressing POWER on the
TV, you can turn the power ON/OFF by pressing POWER
on the remote control.
POWER button
POWER indicator
Turning off the power
Press POWER on the remote control.
• The TV enters standby mode and the image on the screen
disappears.
• The POWER indicator on the TV changes from green to
red.
Press POWER on the TV.
• The POWER indicator on the TV turns off.
• When the TV is turned off by POWER on the TV, you
cannot turn on the power by pressing POWER on the
remote control.
POWER indicator
Off Power off
The TV is in standby mode.Red
The TV is on.Green
Simple button operations for
changing channels
You can change channels in several ways.
Using CHr/s on the remote control unit
• Press CHr to increase the channel number.
• Press CHs to decrease the channel number.
NOTE
• CHr/s on the TV operates the same as CHr/s on
the remote control unit.
Using 0 — 9 on the remote control unit
Select the channels directly by pressing buttons 0 to 9.
a
To select a 1-digit channel (e.g. channel 2):
• Press 0, followed by 2.
To select a 2-digit channel (e.g. channel 12):
• Press 1, followed by 2.
NOTE
• If you are not going to use this TV for a long period of time,
be sure to remove the AC cord from the AC outlet.
• Minor power is consumed when the unit is in standby
mode.
POWER button
When viewing Teletext information
View a page directly which is 3-digit page number from
100 to 899 by pressing buttons 0 to 9.
Channel display
(Example)
SAT.1
12
B/GPAL
MONO
13
Watching TV
Using Flashback (A) on the remote
control unit
Press A to switch the currently tuned channel to the
previously tuned channel.
Press A again to switch back to the currently tuned
channel.
Press A to toggle between the currently selected
input source and the previously selected one.
Press A to return to the previous page in TELETEXT
mode.
Using MPX on the remote control
unit
When receiving a monaural signal
Each time you press MPX, the mode switches
between NICAM MONO and MONO.
Monaural mode
PAL
NICAM
BBC2
99
B/G
MONO
BBC2
99
MONO
In the TV mode of A2 TV broadcasts
When receiving a stereo signal
Each time you press MPX, the mode switches
between STEREO and MONO.
Stereo mode
BBC2
99
B/G
MONO
PAL
NICAM
BBC2
99
B/G
STEREO
PAL
NICAM
When receiving a bilingual signal
Each time you press MPX, the mode switches among
CH A, CH B and CH AB.
Bilingual mode
PAL
NICAM
BBC2
B/G
CH A
99
PAL
NICAM
BBC2
99
B/G
CH B
In the NICAM TV broadcasts
When receiving a stereo signal
Each time you press MPX, the mode switches
between NICAM STEREO and MONO.
Stereo mode
BBC2
MONO
PAL
NICAM
BBC2
99
B/G
STEREO
When receiving a bilingual signal
Each time you press MPX, the mode switches among
NICAM CH A, NICAM CH B, NICAM CH AB and
MONO.
Bilingual mode
BBC2
PAL
NICAM
14
99
B/G
CH A
BBC2
99
MONO
PAL
NICAM
PAL
NICAM
BBC2
CH B
BBC2
CH AB
B/G
B/G
BBC2
99
PAL
NICAM
B/G
CH AB
When receiving a monaural signal
When you press MPX, “MONO” displays.
Monaural mode
BBC2
99
NOTE
• “BBC2” and “99” are tentative network name and channel.
99
99
99
MONO
Watching TV
Simple button operation for
changing volume/sound
Changing the volume
You can change the volume on the TV or on the
remote control unit.
• To increase the volume, press VOLk.
• To decrease the volume, press VOLl.
20
NOTE
• “TV”, “DTV”, “INPUT1”, “INPUT2”, “INPUT3”, “INPUT4” and
“INPUT5” (PC) modes can store volume adjustment values
separately.
Using Mute (e) on the remote control unit
mutes the current sound output.
e
Sleep timer
Allows you to set a time when the TV automatically
switches to standby.
Press SLEEP.
1
• Remaining time displays when sleep timer has
been set.
Sleep Timer: Remain 2 hr. 00 min.
Each time you press SLEEP, the remaining
2
time switches as shown below.
0 hr. 30 min. 1 hr. 00 min. 1 hr. 30 min.
Off
NOTE
• The sleep timer indicator on the TV lights up when the time
has been set.
• When the time has been set, countdown automatically
starts.
• Five minutes before the preset of time expires, the
remaining time displays each minute.
• Select “Off” by pressing SLEEP to cancel the sleep timer.
2 hr. 30 min. 2 hr. 00 min.
Press e.
1
• The sound is silenced.
• “M” is displayed while the mute function is on.
Mute
Press e again within 30 minutes to cancel the
2
mute.
• Before 30 minutes, the volume level returns to the
previous setting.
NOTE
• Within 30 minutes after pressing e, press one of the
buttons below to cancel the mute.
— VOLl/VOL
—
e
• Mute will be cancelled after 30 minutes. However,
the TV will not suddenly output loud sound as the
volume level will be set to 0 automatically. Increase
the volume level by pressing VOLk.
k
15
Watching TV
ANALOG/DTV/RADIO buttons
Use the following buttons on the remote control to
operate the menu.
When you watch the TV for the fi rst time
When the TV powers on for the fi rst time after
purchase, perform the auto installation.
Analogue TV
You can run the auto installation to set channels
automatically.
To watch the analogue TV, select “Auto
1
Installation” from Setup menu. (See page 19.)
After setting the channels, you can select
2
a channel using CH r/s or 0 – 9 on the
remote control unit. (See page 13.)
DTV
When the TV accesses to DTV mode for the fi rst time,
you need to run the auto search. To scan all available
services in your area, follow the procedures below.
To watch DTV broadcasts, select “Auto
1
Search” from installation menu. (See page 34.)
After setting the channels, you can select
2
a channel using CH r/s or 0 – 9 on the
remote control unit. (See page 13.)
ANALOG: Press to switch to analogue mode. After
DTV: Press to switch to DTV mode. After
RADIO: Press to switch to radio mode. After
16
switching from DTV, radio or external input
mode to analogue mode, the TV jumps
to the most recently viewed analogue
channel.
switching from analogue, radio or external
input mode to DTV mode, the TV jumps to
the most recently viewed DTV channel.
switching from analogue, DTV or external
input mode to radio mode, the TV jumps to
the most recently tuned radio channel.
Basic adjustment settings
Menu operation buttons
Use the following buttons on the remote control to
operate the menu.
On-Screen Display
(Example)
...
[
Option
MENU
Option
DTV Menu
DNR
Input Select
Output Volume Select
Audio Only
Game Play Time
Colour System
HDMI Setup
Fine Sync.
Item displayed in yellow
1
Colour System
• This indicates the item currently selected.
• Press ENTER to go to the adjustment screen for this
item.
Item displayed in white
2
• This indicates an item can be selected.
Item displayed in grey
3
• This indicates that the item cannot be selected.
* There are various reasons why items cannot be
selected, but the main reasons are as follows:
1. Nothing is connected to the selected input
terminal.
2. The function is not compatible with the current
input signal.
]
1
2
3
MENU: Press to open or close the menu screen.
a
/b/c/d: Press to select a desired item on the
screen or adjust a selected item.
ENTER: Press to go to the next step or complete
the setting.
RETURN: Press to return to the previous step.
ENTER
: Select : Enter
RETURN
: Back
MENU
: End
The bar above is an operational guide for
the remote control. The bar will change in
accordance with each menu setting screen.
NOTE
• The screens in the operation manual are for explanation
purposes (some are enlarged, others cropped) and may
vary slightly from the actual screens.
17
Basic adjustment settings
Menu items (TV/DTV/AV)
List of menu items to help you with operations
Picture Picture
AV Mode ...................................................................... Page 23
OPC .............................................................................. Page 23
Backlight ..................................................................... Page 24
Contrast ....................................................................... Page 24
Brightness ................................................................... Page 24
Colour .......................................................................... Page 24
Tint ............................................................................... Page 24
Sharpness ................................................................... Page 24
Advanced
Colour Temp. . ................................................. Page 25
Fine Motion Advanced .................................... Page 25
Film Mode ........................................................ Page 25
Black ................................................................ Page 25
3D-Y/C ............................................................. Page 26
Monochrome ................................................... Page 26
Reset ............................................................................ Page 24
Audio
AV Mode ...................................................................... Page 23
Treble ........................................................................... Page 26
Bass ............................................................................. Page 26
Balance ........................................................................ Page 26
Surround ...................................................................... Page 27
Reset ............................................................................ Page 26
Menu items (PC)
List of menu items to help you with operations
AV Mode ...................................................................... Page 23
OPC .............................................................................. Page 23
Backlight ..................................................................... Page 24
Contrast ....................................................................... Page 24
Brightness ................................................................... Page 24
Advanced
Colour Temp. .................................................. Page 25
Black ................................................................ Page 25
Reset ............................................................................ Page 24
Audio
AV Mode ...................................................................... Page 23
Treble ........................................................................... Page 26
Bass ............................................................................. Page 26
Balance ........................................................................ Page 26
Surround ...................................................................... Page 27
Reset ............................................................................ Page 26
Power Control
Power Management ................................................... Page 28
No Operation Off ........................................................ Page 28
Ecology ........................................................................ Page 28
Power Control
No Signal Off ............................................................... Page 27
No Operation Off ........................................................ Page 28
Ecology ........................................................................ Page 28
Setup
Auto Installation .......................................................... Page 19
Programme Setup ...............................................Pages 19-22
Child Lock ................................................................... Page 38
Input Skip .................................................................... Page 39
Input Label .................................................................. Page 39
Position ........................................................................ Page 40
WSS ............................................................................. Page 40
4:3 Mode ...................................................................... Page 41
Standby Mode ............................................................. Page 41
Language ..................................................................... Page 45
Text Language ............................................................ Page 54
Reset ............................................................................ Page 42
Option
DNR .............................................................................. Page 46
Input Select
Input1 ............................................................... Page 46
Input2 ............................................................... Page 46
Output Volume Select ................................................ Page 47
Audio Only ................................................................... Page 47
Game Play Time .......................................................... Page 48
Colour System ............................................................ Page 48
HDMI Setup ................................................................. Page 49
Setup
Input Skip .................................................................... Page 39
Input Label .................................................................. Page 39
Standby Mode ............................................................. Page 41
Language ..................................................................... Page 45
Text Language ............................................................ Page 54
Reset ............................................................................ Page 42
Option
Input Select
Input1 ............................................................... Page 46
Input2 ............................................................... Page 46
Output Volume Select ................................................ Page 47
Audio Only ................................................................... Page 47
Game Play Time .......................................................... Page 48
Fine Sync.
Input Signal...................................................... Page 49
Auto Sync. ....................................................... Page 50
H-Position ........................................................ Page 50
V-Position ........................................................ Page 50
Clock ................................................................ Page 50
Phase ............................................................... Page 50
Reset ................................................................ Page 50
NOTE
• Some menu items may not be displayed depending on the
selected input source.
18
Basic adjustment settings (Analogue)
Auto installation
You can run auto installation again, even after setting
up the preset channels.
Press MENU and the MENU screen displays.
1
Press c/d to select “Setup”.
2
Press a/b to select “Auto Installation”, and
3
then press ENTER.
...
[
Setup
MENU
Setup Option
Auto Installation
Programme Setup
Child Lock
Input Skip
Input Label
Position
WSS
4:3 Mode
Standby Mode
Language
Text Language
Reset
If you have already set the password, enter it
4
here.
• See page 38 for setting a password.
Press a/b to select “Yes”, and then press
5
ENTER.
Press a/b to select the desired language
6
listed on the screen, and then press ENTER.
Auto Installation
Press a/b to select the desired sound
system, and then press ENTER.
You do not need to do anything during the
auto search.
“Search is completed.” is displayed. Press
MENU to exit.
]
Programme setup
You can run the auto search procedure again at any
time by accessing the Setup menu and Programme
Setup. Channels can be tuned automatically or
manually.
Auto search
You can also automatically search by performing
the procedure below. This is the same function as
programme auto search in auto installation.
Press MENU and the MENU screen displays.
1
Press c/d to select “Setup”.
2
Press a/b to select “Programme Setup”, and
3
then press ENTER.
If you have already set the password, enter it
here.
• See page 38 for setting a password.
...
[
Setup
MENU
Setup Option
Auto Installation
Programme Setup
Child Lock
Input Skip
Input Label
Position
WSS
4:3 Mode
Standby Mode
Language
Text Language
Reset
Press a/b to select “Auto Search”, and then
4
press ENTER.
Press a/b to select “Yes”, and then press
5
ENTER.
Programme Setup
Press a/b to select the desired sound
system, and then press ENTER.
“Search is completed.” is displayed. Press
MENU to exit.
]
19
Loading...