Useful Features
OK
Back
M
End
E
Contrast 30
Adjusting Picture Settings
TEXT
RE
D
V
L
EA
O
H
L
T
E
L
IT
T
B
U
S
OK
MENUSOUND
M
CH
TV/VIDEO
Adjustment item
Contrast
</>
E
N
D
E
END
1 Press Red to display the Picture
menu.
Note:
Note:
• The Picture menu can also be
]/[
OK
displayed by selecting “Picture” in
the TV menu (see pages 18 and
19).
Picture menu
Contrast [ 30
Colour [ 0
Black level[ 0
Sharpness [ 0
Red-blue [ 0
Green [ 0
Reset
OK
M
Back
E
]
]
]
]
]
]
End
Red
2 Press ]/[ to select the desired
adjustment item, and then press
OK.
• The next menu appears.
3 Press </> to make the
adjustment.
4 Press END to exit.
Press Left (<)
Decrease contrast
Choice/Value range
0 – 60
Press Right (>)
Increase contrast
Colour
Black level
Sharpness
Red-blue
Green
Tint *
Reset
Lower colour intensity
Less bright
Soft picture
More red
Less green
Towards purple
Reset value (Press OK.)
-30 – 30
-30 – 30
-3 – 3
-5 – 5
-5 – 5
-30 – 30
* The menu function is only visible when “N358” or “N443” signal has been input into the unit.
Higher colour intensity
More bright
Sharp picture
More blue
More green
Towards green
15
Useful Features (Continued)
Back
M
End
E
Sound menu
Sound via [ TV
]
Headph. vol. [ 3
]
Loudsp. sound[ Mono
]
Headph. sound[ Mono
]
AV audio sig.[ Sound1
]
Sound wide [ off
]
Balance [
]
0
0
OK
OK
Back
M
End
E
Headph.vol. 3 0
Adjusting Sound Settings
TEXT
R
E
D
V
L
E
O
A
H
L
T
SUBTITLE
END
E
OK
MENUSOUND
M
CH
TV/VIDEO
Adjustment item
Sound via
Headph. vol.*
Loudsp. sound
Headph. sound*
AV audio sig.
Sound wide*
Balance*
</>
END
]/[
OK
Green
1 Press Green to display the Sound
menu.
Note:
• The Sound menu can also be
Note:
displayed by selecting “Sound” in
the TV menu (see pages 18 and
19).
2 Press ]/[ to select the desired
adjustment item, and then press
OK.
• Each item can now be selected or
the next menu appears.
3 Press </> to make the
adjustment.
4 Press END to exit.
Press Left (<)
–
Decrease headphones volume
–
–
–
Increase the volume
of the left speaker
Choice/Value range
Stereo Mono/Sound1
Sound2 Sound1+2 Mono
Nicam
(* The choices differ depending on
whether or not a NICAM or IGR
signal is received.) See pages 37
and 38.
Sound1 Sound2 Sound1+2
TV Hi-fi
0 – 60
Mono/Mono
off on
-15 – 15
Press Right (>)
–
Increase headphones volume
–
–
–
Increase the volume
of the right speaker
* These items are not displayed when the “Sound via” item is set to “Hi-fi”.
Note:
Note:
• In the “AV audio sig.” item, mono-video recorders should select “Sound1” or “Sound2”. Stereo-video recorders should
select “Sound1+2” so that the desired sound can be selected when playing back the video.
16
Useful Features (Continued)
Back
M
End
E
Sound menu
OK
Sound via [ Hi-fi
]
Loudsp. sound[ Mono
]
AV audio sig.[ Sound1
]
Hi-fi Sound Settings
This programme allows you to enjoy higher sound quality when connecting the AUDIO OUT terminals to
an external amplifier using an audio cord.
TEXT
R
E
D
V
L
E
O
A
H
L
T
E
L
T
I
T
B
U
S
E
N
D
E
OK
CH
END
MENUSOUND
M
]/[
OK
Volume
(+)/(–)
TV/VIDEO
</>
1 When switching “Sound via” to
“Hi-fi” in the Sound menu on page
16, the sound from the built-in
speakers will be turned off.
2 Press ]/[ to select the desired
adjustment item, and then press
OK.
3 Press </> to select the Sound
mode.
4 Press END to exit.
Note:
• Pressing Volume (+)/(–) will display
Note:
the volume indicator shown on the
right. You can adjust the volume by
Hi-fi Volume
50
pressing + or – on the same button.
* To exit this mode, in the Sound menu,
switch “Sound via” from “Hi-fi” to “TV”.
Using Programme Table
The Programme table shows a list of all receivable programmes. They are located in channels 0 to 199.
The currently selected programme is displayed in yellow, and the child-locked programmes are displayed
in red.
TEXT
R
E
D
V
L
E
O
A
H
L
T
E
L
T
I
T
B
U
S
OK
MENUSOUND
CH
TV/VIDEO
</>
E
N
D
E
M
]/[
OK
To select the desired programme
1 Press OK to display the
Programme table.
2 Press ]/[ and/or </> to select
the desired programme.
• To display the next or previous list
of the Programme table, press
]/[ when the cursor is at a
programme in the lower-right or
Programme table
0
8 E 9 16 E54
1 S 6 9 E1 17 E56
0
2 S 8 1 E11 18 E57
0
3 S1 11 E36 19
0
4 S11 12 E37 2
0
5 E 3 13 E38 21
6 E 5 14 E5 22
0
7 E 6 15 E53 23
0
OK
0
0
0
0
0
E
M
Back
End
upper-left position, or press </>
when the cursor is at a programme in the right or left column.
3 Press OK to display the selected
programme.
17
Useful Features (Continued)
Selecting Menu Items
• The menus can be used to adjust the various settings of your LCD TV set. Select the desired menu
item by following the steps below.
■ Using TV Menus
OK
TEXT
REVEAL
D
L
O
H
T
E
L
IT
T
B
U
S
E
N
D
E
OK
CH
TV/VIDEO
END
MENUSOUND
M
MENU
]/[
■ Using Direct Control Menu
Control panel of
the main unit
MENU
TV/VIDEO
MENU
TV/
VIDEO
Volume
(–)/(+)
(
CH
CH
)/( )
1 Press MENU on the remote
control to display the TV menu.
2 Press ]/[ to select the desired
menu item.
• The cursor moves up or down.
• The cursor indicates the selected
menu item.
3 Press OK to display the setting
screen for the selected menu
item.
• Press OK again to adjust the
selected item.
• See the next page for a table of
the setting screens.
4 Press </> to adjust the selected
item.
5 Press MENU to return to the
previous screen or END to return
to the normal screen.
1 Press MENU on the main unit to
display the TV menu.
2 Press CH ( )/( ) to select the
desired menu item.
• The cursor moves up or down.
• The cursor indicates the selected
menu item.
3 Press TV/VIDEO to display the
setting screen for the selected
menu item.
• Press TV/VIDEO again to adjust
the selected item.
TV menu
Picture
Sound
Programmes
Features
AV connections
Timer functions
First installation
Language
OK
TV menu
Picture
Sound
Programmes
Features
AV connections
Timer functions
First installation
Language
OK
M
Back
M
Back
E
E
End
End
4 Press Volume (–)/(+) to make the
adjustment.
5 Press MENU to return to the
previous screen.
• Each time MENU is pressed, you
will return the previous screens.
Note:
• The items displayed differ depending on the setting conditions.
• The item selected is displayed in yellow.
• The adjustment values and settings which were changed before the screen is restored are saved as is in the
18
Note:
memory.
Useful Features (Continued)
Selecting Menu Items (Continued)
■ TV Menu Setting Screens
For details on using each setting screen, refer to the page number indicated.
TV menu
Picture
Sound
Programmes
Features
AV connections
Timer functions
First installation
Language
OK
M
Back
E
End
(Page 15)
Picture menu
Contrast [ 30
Colour [ 0
Black level[ 0
Sharpness [ 0
Red-blue [ 0
Green [ 0
Reset
OK
M
Back
E
]
]
]
]
]
]
End
(Page 16–17)
Sound menu
Sound via [ TV
Headph. vol. [ 3
Loudsp. sound[ Mono
Headph. sound[ Mono
AV audio sig.[Sound1+2
Sound wide [ off
Balance [
OK
M
Back
(Page 20–25)
Programmes
Automatic search
Manual adjustment
Sort
Erase programme range
Enter/change name
OK
M
Back
(Page 34–35)
AV connections
AV1
)
AV2(Y/C
)
AV2(CVBS
For programmes
OK
M
Back
E
End
(Page 36)
E
End
]
]
0
]
]
]
]
]
0
TV menu
Picture
Sound
Programmes
Features
AV connections
Timer functions
First installation
Language
OK
M
Back
E
End
Timer functions
Time
Switch off [ no
Alarm [ no
Alarm volume [
OK
M
[
: :
Back
0
E
End
]
]
]
]
(Page 7)
First installation
(
English
Deutsch
Français
Español
Italiano
Nederlands
E
End
Svenska
OK
)
Language
M
Back
E
End
(Page 26–27)
Features
Brightness [bright
Rotate horizontally[off
Rotate vertically [off
Auto power off [off
On-screen display
Child lock
OK
M
Back
(Page 7)
]
]
]
]
E
End
Language
English
Deutsch
Français
Español
Italiano
Nederlands
Svenska
OK
M
Back
E
End
19
Useful Features (Continued)
Programmes
[1] Automatic search
Perform the procedure below to search for and store new programmes after the First Installation
routine.
TEXT
R
E
D
V
L
E
O
H
T
E
L
IT
T
B
U
S
OK
CH
</>
A
L
E
N
D
E
MENUSOUND
M
MENU
]/[
1 Press MENU to display the TV
menu.
2 Press ]/[ to select
“Programmes”, and then press
OK to display the “Programmes”
screen.
OK
3 Press ]/[ to select “Automatic
TV/VIDEO
search”, and then press OK to
display the “Automatic search”
screen.
4 Press ]/[ to select the desired
item, and then press OK.
Press </> to select the desired
item.
Note:
• You can change “Colour system”
Note:
TV menu
Picture
Sound
Programmes
Features
AV connections
Timer functions
First installation
Language
OK
Programmes
Automatic search
Manual adjustment
Sort
Erase programme range
Enter/change name
OK
Automatic search
Country
Colour system
Sound system
Store progr. from
Start search
OK
M
Back
M
Back
M
Back
E
End
E
End
[ UK]
[
PAL
[ I]
E
End
]
and “Sound system” only when
“Other Countries” is selected in
“Country”.
5 Press ]/[ to select “Store progr.
from”, and then press OK to
display the “Store progr. from”
screen.
Store progr. from
0
8 E 9 16 E54
0
1 S 6 9 E1 17 E56
0
2 S 8 1 E11 18 E57
3 S1 11 E36 19
0
4 S11 12 E37 2
0
5 E 3 13 E38 21
0
6 E 5 14 E5 22
0
7 E 6 15 E53 23
OK
0
0
0
0
0
E
M
Back
End
20
Programmes (Continued)
[1] Automatic search (Continued)
Useful Features (Continued)
SUBTITLE
TEXT
R
E
V
LD
E
O
A
H
T
OK
CH
</>
L
END
E
END
MENUSOUND
M
]/[
6 Press ]/[ and/or </> to select
the programme position from
which the programmes are to be
stored, and then press OK.
OK
TV/VIDEO
7 Press ]/[ to select “Start
search”, and then press OK to
begin the automatic programme
search.
Note:
• See pages 7 and 8 for details of the
Note:
Store progr. from
0
8 E 9 16 E54
0
1 S 6 9 E1 17 E56
0
2 S 8 1 E11 18 E57
3 S1 11 E36 19
0
4 S11 12 E37 2
0
5 E 3 13 E38 21
0
6 E 5 14 E5 22
0
7 E 6 15 E53 23
OK
Automatic search
Country
Colour system
Sound system
Store progr. from
Start search
OK
0
M
Back
0
0
0
M
Back
[ UK]
[
PAL
[ I]
E
End
0
E
End
]
search process.
8 After the search is completed,
press END to exit.
21
Useful Features (Continued)
Programmes (Continued)
[2] Manual adjustment
Individual settings of programmes can be adjusted.
TEXT
REVEAL
D
L
O
H
T
E
L
IT
T
B
U
S
OK
</>
E
N
D
E
END
MENUSOUND
M
]/[
CH
OK
Channel
TV/VIDEO
Select
1 Perform steps 1 and 2 in
[1] Automatic search to display
the “Programmes” screen.
2 Press ]/[ to select “Manual
adjustment”, and then press OK to
display the “Manual adjustment”
screen.
3 Press ]/[ to select the item, and
then press </> to make the
adjustment. (See the table below
for details.)
• You can also use Channel Select
to adjust the “Frequency” items.
• To adjust “Name”, first press OK to
active the text input mode. Press
Programmes
Automatic search
Manual adjustment
Sort
Erase programme range
Enter/change name
OK
Manual adjustment
Channel
Frequency
Name
Colour system
Sound system
Skip
[
OK
E
M
Back
[
[291 .25MHz]
[
E36
Auto]
[
[ B/G
off
E
M
Back
End
36
End
]
]
]
]
</> to select the input position and
press ]/[ to select the desired
character. When you finish inputting,
press OK to set the name.
4 Press END to exit.
Adjustment item
Channel
Frequency
Name
Colour system
Sound system
Skip
Note:
Note:
Choice/Value range
0–199
044 – 859 (MHz)
A – Z, +, -, ., !, /, 0 – 9
Auto, PAL, SECAM
B/G, I, D/K, L
on off
The channel changes to the higher or lower
channel.
Receivable frequencies depending on TV
norm, installation site, and range.
Programme name (up to five characters).
Colour norm.
TV norm.
Channel numbers with a “(•) (RED)” mark on
the left are set to SKIP.
Description
• Depending on the settings in the colour system of the channels, switching between channels may be slow. If you
want to speed up channel switching, switch “Auto” in “Colour system” to the current reception system (PAL or
SECAM).
22
Useful Features (Continued)
Programmes (Continued)
[3] Sort
The programme positions for individual programmes can be freely changed.
SUBTITLE
TEXT
R
E
V
E
A
HOLD
T
OK
CH
</>
L
END
E
END
MENUSOUND
M
]/[
OK
TV/VIDEO
1 Perform steps 1 and 2 in
[1] Automatic search to display
the “Programmes” screen.
2 Press ]/[ to select “Sort,” and
then press OK to display the
“Sort” screen.
3 Press ]/[ and/or </> to select
the desired programme, and then
press OK to sort.
• When OK is pressed, the Move
mode is activated. Press ]/[ to
move the currently marked
programme to the desired programme position. The marked
programme is swapped with the
Programmes
Automatic search
Manual adjustment
Sort
Erase programme range
Enter/change name
OK
Sort
0
8 E 9 16 E54
0
1 S 6 9 E1 17 E56
0
2 S 8 1 E11 18 E57
3 S1 11 E36 19
0
4 S11 12 E37 2
0
5 E 3 13 E38 21
0
6 E 5 14 E5 22
0
7 E 6 15 E53 23
OK
M
Back
0
E
End
0
0
0
0
E
M
Back
End
programme at the selected
programme position. Press OK to
leave the Move mode.
4 Press END to exit.
23
Useful Features (Continued)
Programmes (Continued)
[4] Erase programme range
The individual programme or programmes in a connected range can be erased.
TEXT
R
E
D
V
L
E
O
A
H
T
E
L
IT
T
B
U
S
OK
CH
</>
L
E
N
D
E
END
MENUSOUND
M
]/[
OK
TV/VIDEO
1 Perform steps 1 and 2 in
[1] Automatic search to display
the “Programmes” screen.
2 Press ]/[ to select “Erase
programme range”, and then
press OK to display the “Erase
programme range” screen.
3 Press ]/[ and/or </> to select
the programme to be erased, and
then press OK. The selected
programme is shown in yellow.
• If you want to erase programmes in
a connected range, select the
programme at the beginning of the
desired range.
4 If you are erasing programmes in
a connected range, press ]/[
and/or </> to select the
programme at the end of the
range. The selected programmes
are shown in yellow.
Programmes
Automatic search
Manual adjustment
Sort
Erase programme range
Enter/change name
OK
Erase programme range
0
8 E 9 16 E54
0
1 S 6 9 E1 17 E56
0
2 S 8 1 E11 18 E57
3 S1 11 E36 19
0
4 S11 12 E37 2
0
5 E 3 13 E38 21
0
6 E 5 14 E5 22
0
7 E 6 15 E53 23
OK
Erase programme range
0
8 E 9 16 E54
0
1 S 6 9 E1 17 E56
0
2 S 8 1 E11 18 E57
3 S1 11 E36 19
0
4 S11 12 E37 2
0
5 E 3 13 E38 21
0
6 E 5 14 E5 22
0
7 E 6 15 E53 23
OK
M
Back
0
0
E
End
0
0
0
0
E
M
0
0
Back
End
0
0
E
M
Back
End
24
5 Press OK to erase the selected
programme(s). All the subsequent
programmes move up.
6 Press END to exit.
Erase programme range
8 E38 16
0
0
1 E 5 9 E5 17
2 E 6 1 E53 18
0
0
3 E 9 11 E54 19
0
4 E1 12 E56 2
5 E11 13 E57 21
6 E36 14 22
7 E37 15 23
OK
0
0
0
E
M
Back
End
Useful Features (Continued)
Programmes (Continued)
[5] Enter/change name
The name of an individual programme can be entered or changed.
TEXT
REVEAL
D
L
O
H
T
E
L
IT
T
B
U
S
OK
CH
</>
E
N
D
E
END
MENUSOUND
M
]/[
OK
TV/VIDEO
1 Perform steps 1 and 2 in
[1] Automatic search to display
the “Programmes” screen.
2 Press ]/[ to select “Enter/
change name”, and then press OK
to display the “Enter/change
name” screen.
3 Press ]/[ and/or </> to select
the desired programme, and then
press OK. The character at the
input position blinks.
4 Press </> to select the input
position, and then press ]/[ to
select the desired character.
Programmes
Automatic search
Manual adjustment
Sort
Erase programme range
Enter/change name
OK
Enter/change name
0
8 E 9 16 E54
0
1 _ 6 9 E1 17 E56
0
2 S 8 1 E11 18 E57
3 S1 11 E36 19
0
4 S11 12 E37 2
0
5 E 3 13 E38 21
0
6 E 5 14 E5 22
0
7 E 6 15 E53 23
OK
Enter/change name
0
8 E 9 16 E54
0
1 S 6 9 E1 17 E56
0
2 S 8 1 E11 18 E57
3 S1 11 E36 19
0
4 S11 12 E37 2
0
5 E 3 13 E38 21
0
6 E 5 14 E5 22
0
7 E 6 15 E53 23
OK
M
Back
0
0
E
End
0
0
0
0
E
M
0
0
Back
End
0
0
E
M
Back
End
5 Press OK to accept the name
entered, and then press END to
exit.
Enter/change name
0
8 E 9 16 E54
0
1 S 6 9 E1 17 E56
0
2 S 8 1 E11 18 E57
3 S1 11 E36 19
0
4 S11 12 E37 2
0
5 E 3 13 E38 21
0
6 E 5 14 E5 22
0
7 E 6 15 E53 23
OK
0
0
0
0
0
E
M
Back
End
25
Useful Features (Continued)
Features
The Feature items can be set by the user.
TEXT
REVEAL
D
L
O
H
T
E
L
IT
T
B
U
S
OK
CH
</>
E
N
D
E
MENUSOUND
M
MENU
]/[
OK
TV/VIDEO
1 Press MENU to display the TV
menu.
2 Press ]/[ to select “Features”,
and then press OK to display the
“Features” screen.
3 Press ]/[ to select the desired
adjustment item, and then press
OK.
4 Press </> to make the
adjustment. (Except “On-screen
display” and “Child lock” menu
items)
TV menu
Picture
Sound
Programmes
Features
AV connections
Timer functions
First installation
Language
OK
Features
Brightness [bright
Rotate horizontally[off
Rotate vertically [off
Auto power off [off
On-screen display
Child lock
E
M
OK
Back
M
Back
End
]
]
]
]
E
End
5 Press END to exit.
26
Features (Continued)
Useful Features (Continued)
Selected item
Brightness
Rotate horizontally
Rotate vertically
Auto power off
(only TV mode)
Factory setting
[bright] Maximum brightness
[off] Normal
horizontal image
orientation
[off] Normal
vertical image
orientation
[off] This feature is inactive.
Setting change
[medium] Brightness 60% → Suitable for
[dark] Brightness 20% → Sufficiently
[on] Mirror image → To display mirror
[on] Inverted image → To display images
viewing in well-lit areas. Saves
energy.
bright when viewing in dim areas.
images for special uses.
ABC
ABC
upside down for special uses.
ABC
[on] The power of the LCD TV set is turned
off when there is no signal for 5 minutes.
27
Useful Features (Continued)
On-screen Display
You can adjust various settings for on-screen displays.
TEXT
D
L
O
H
T
E
L
IT
T
B
U
S
OK
CH
TV/VIDEO
Position
Sound info
Time
Alarm time
Sleep time
REVEAL
</>
E
N
D
E
END
MENUSOUND
M
Cyan
]/[
OK
1 Perform steps 1 and 2 in
Features to display the “Features”
screen.
2 Press ]/[
to select “On-screen
display,” and then press OK to
display the “On-screen display”
screen.
3 Press ]/[
to select the desired
adjustment item. (See the table
below.)
4 Press </> to make the
adjustment.
Features
Brightness [bright
Rotate horizontally[off
Rotate vertically [off
Auto power off [off
On-screen display
Child lock
OK
On-screen display
Position [bottom
Sound info [yes
Time [ no
Alarm time [ no
Sleep time [ no
OK
M
Back
M
Back
E
End
E
End
]
]
]
]
]
]
]
]
]
5 Press END to exit.
Choice/Value rangeAdjustment item Description
bottom
no
no
no
no
yes
yes
yes
yes
top
To select the position of the On-screen display.
To select whether or not sound info is to be displayed
when a channel has been selected.
To select information to be displayed in the On-screen
display. To activate the On-screen display, use the
Cyan button.
,
28
Useful Features (Continued)
Child Lock
Important:
• Please refer to page 51 for “IMPORTANT NOTE ON DISENGAGING ADVANCED CHILD LOCK”.
The Child Lock function blocks the viewing of any channel for which the child lock has been set.
To use the Child Lock function, you first need to define your PIN (Personal Identification Number).
[1] Defining a PIN
TEXT
REVEAL
D
L
O
H
T
E
L
IT
T
B
U
S
OK
CH
OK
E
N
D
E
END
MENUSOUND
M
MENU
]/[
1 Perform steps 1 and 2 in
Features to display the “Features”
screen.
2 Press ]/[ to select “Child lock”.
Features
Brightness [bright
Rotate horizontally[off
Rotate vertically [off
Auto power off [off
On-screen display
Child lock
OK
M
Back
E
End
]
]
]
]
Channel
TV/VIDEO
Select
3 Press OK to display the PIN input
screen.
4 Input the desired four-digit PIN
(e.g. 1234) with Channel Select.
Note:
• Be sure to make a note of your PIN
• The PIN will not be set if MENU or
Note:
before pressing OK.
END is pressed before the fourth
digit has been input.
Child lock
Please define your PIN.
Child lock [????
OK
Child lock
Please define your PIN.
Child lock [1234
OK
M
M
Back
Back
]
E
End
]
E
End
5 Press OK to accept the entered
PIN.
29
Useful Features (Continued)
Child Lock (Continued)
[2] Changing/Cancelling a PIN
To change a PIN
OK
END
E
END
MENUSOUND
M
1 Perform steps 1 to 3 in
[1] Defining a PIN to display the
PIN input screen.
SUBTITLE
TEXT
R
E
V
LD
E
O
A
H
L
T
OK
2 Enter your four-digit PIN (e.g.
CH
]/[
Channel
TV/VIDEO
Select
1234) with Channel Select.
Note:
• Numbers entered are hidden with
????.
• If the PIN has been input incorrectly,
“Wrong PIN!” is displayed.
When the PIN is correctly entered,
the “Child lock” screen appears.
Note:
Child lock
Please define your PIN:
E
]
End
Child lock [????
OK
M
Back
3 Press ]/[ to select “Change
PIN”, and then press OK. The
currently defined PIN is displayed.
4 Input the new four-digit PIN (e.g.
5678) with Channel Select.
5 Press END to exit.
To cancel a PIN
| In step 3 above, press ]/[ to
select “Cancel PIN”, and then
press OK to cancel the currently
defined PIN.
Child lock
For all programmes
For individual progr. only
Change PIN
Cancel PIN
OK
Child lock
For all programmes
For individual progr. only
Change PIN [5678
Cancel PIN
OK
Child lock
For all programmes
For individual progr. only
Change PIN
Cancel PIN
OK
M
M
M
Back
Back
Back
[
1234
[
1234
]
E
End
]
E
End
]
E
End
30
Useful Features (Continued)
Child Lock (Continued)
[3] Setting a Child Lock
There are four different ways of activating a child lock:
1. General child lock for all programmes immediately
2. General child lock for all programmes with daily time limit
3. General child lock for all programmes with single time limit
4. Programme-position related child lock without time limit
The Child Lock comes into effect only after the LCD TV set has entered the standby mode and is then
turned on again.
To set a Child Lock for all
programmes with a time limit
TEXT
REVEAL
D
L
O
H
T
E
L
IT
T
B
U
S
E
N
D
E
OK
END
MENUSOUND
M
]/[
</>
1 Perform steps 1 to 3 in
[2] Changing/Cancelling a PIN to
display the “Child lock” screen.
2 Press ]/[ to select “For all
programmes”, and then press OK
Child lock
For all programmes
For individual progr. only
Change PIN [1234
Cancel PIN
OK
M
Back
]
E
End
to display the “For all
CH
programmes” screen.
OK
TV/VIDEO
Channel
Select
3 Press ]/[ to select the desired
item. (See the table below.)
4 Press </> to select the desired
choice, and, if required, input
digits with Channel Select.
For all programmes
Immediately [ no
Daily [ no
Once [ no
OK
M
Back
]
]
]
E
End
5 Press END to exit.
Note:
• If the current clock time is within the
• When a Child Lock is set for all
Note:
time limit, the Child Lock is activated
immediately after the LCD TV set is
turned off and on again. For
example, if the current clock time is
9:00 and the time limit is specified
from 22:00 to 14:00, the lock is
effective from 9:00 to 14:00.
programmes with a time limit, the
“Time” item is not displayed in the
TV menu and cannot be selected.
Adjustment item
Choice/Input value
Description
Select “yes” to activate the Child Lock immediately (after the
Immediately
no yes
LCD TV set has been turned off and on again). The lock
remains effective until “no” is selected.
Daily
Once
no HH:MM-HH:MM
no HH:MM-HH:MM
Warning:
• The timer takes its clock information from the Teletext broadcast. The teletext broadcast may be in a different time
zone and therefore child lock timer may not activate as expected. Concerning this detail, please refer to page 39.
Input the start and end time for a daily-recurring Child Lock.
The lock is activated everyday unless “no” is selected.
Input the start and end time for a once-only Child Lock. The
length of the period should be up to 24 hours.
31
Useful Features (Continued)
Child Lock (Continued)
[3] Setting Child Lock (Continued)
TEXT
R
E
D
V
L
E
O
A
H
L
T
E
L
IT
T
B
U
S
E
N
D
E
OK
END
MENUSOUND
M
]/[
</>
CH
OK
TV/VIDEO
programmes without time limit
1 Perform steps 1 to 3 in
[2] Changing/Cancelling a PIN
to display the “Child lock” screen.
2 Press ]/[ to select “For
individual progr. only”, and then
press OK to display the “For
individual progr. only” screen.
3 Press ]/[ and/or </> to select
the desired programme.
4 Press OK to lock the programme.
The locked programme is
displayed in red.
Note:
• To unlock the programme, select
• The Child Lock remains effective
Note:
the programme and press OK.
until it is cancelled.
Child lock
For all programmes
For individual progr. only
Change PIN [1234
Cancel PIN
OK
For individual progr. only
0
8 E 9 16 E54
0
1 S 6 9 E1 17 E56
0
2 S 8 1 E11 18 E57
3 S1 11 E36 19
0
4 S11 12 E37 2
0
5 E 3 13 E38 21
0
6 E 5 14 E5 22
0
7 E 6 15 E53 23
OK
0
M
Back
0
]
E
End
0
0
0
E
M
Back
End
5 Press END to exit.
To set a Child Lock for individual
Note:
Note:
• When a Child Lock is activated, the “Programmes” and “First installation” items are not displayed in the TV menu
and cannot be selected.
32
Useful Features (Continued)
Child Lock (Continued)
[4] Temporarily cancelling the Child Lock setting
You can view a programme for which a Child Lock has been set by temporarily cancelling the Child
Lock setting. Perform the procedure below to input your PIN and cancel the Child Lock if you are
prompted to do so.
When the PIN input screen
|
TEXT
R
EV
D
L
E
O
AL
H
T
E
L
IT
T
B
U
S
E
N
D
E
OK
MENUSOUND
M
CH
appears, input your PIN with
Channel Select. The normal
screen appears when the PIN is
correctly entered.
Note:
• If the PIN has been input incorrectly, “Wrong PIN!” is displayed.
Channel
TV/VIDEO
Select
Child lock
Please define your PIN.
Child lock [????
OK
M
Back
E
]
End
33
Useful Features (Continued)
OK
Back
M
End
E
AV1
Signal type [ Auto
]
AFC [ Mode1
]
Colour system[ Auto
]
OK
Back
M
End
E
AV1
Signal type [ CVBS
]
AFC [ Mode2
]
Colour system[ Auto
]
AV Connections
It is possible to manually adjust various settings for connections with external devices on the “AV connections” screen.
[1] AV1/AV2
Select the appropriate signal type and colour standard for the signals from the video equipment
connected to the AV1or AV2 terminal.
SUBTITLE
TEXT
</>
R
E
V
LD
E
O
A
H
L
T
END
E
OK
CH
END
MENUSOUND
M
MENU
]/[
1 Press MENU to display the TV
menu.
2 Press ]/[ to select “AV
connections”, and then press OK
to display the “AV connections”
screen.
OK
3 Press ]/[ to select “AV1”,
TV/VIDEO
“AV2 (Y/C)”, and “AV2(CVBS)”,
and then press OK to display the
signal type selection screen.
TV menu
Picture
Sound
Programmes
Features
AV connections
Timer functions
First installation
Language
OK
AV connections
AV1
AV2(Y/C
AV2(CVBS
For programmes
E
M
)
)
OK
M
Back
Back
E
End
End
4 Press ]/[ to select the desired
item, and then press OK.
5 Press </> to select the desired
“Signal type”, “AFC” and “Colour
system”, and then press OK.
6 Press END to exit.
Signal type*
Choice/Input valueAdjustment item
Auto, CVBS, Y/C
To select the signal type of external equipment.
Description
To select frequency control modes. Mode1 is suitable for
AFC
Mode1, Mode2
DVD players or decoders, and Mode2 is suitable for
VCRs or Camcorders.
Auto, PAL, SECAM,
Colour system
N358, N443, PAL60,
Colour norm.
PAL-M, PAL-N
* The menu function is only visible when the AV1 is selected.
Note:
• If no (colour) image displays, try to change the other signal type.
• Depending on the compatibility with the various types of equipment, the picture may become skewed. In this case,
• Switching between AV input signals may be slow, depending on the settings in “Colour system”. If you want to speed
34
Note:
select the “AFC” (Automatic Frequency Control) mode that will improve the picture.
up signal switching, switch “Auto” in “Colour System” to the current reception colour system.
Useful Features (Continued)
OK
Back
M
End
E
For programmes
AV control voltage
[
no
]
RGB on-screen display
[
no
]
For decoder connected to AV1
Sound from AV1
[
Dec .
]
OK
Back
M
End
E
For programmes
AV control voltage
[
no
]
RGB on-screen display
[
no
]
For decoder connected to AV1
Sound from AV1
[
Dec .
]
OK
Back
M
End
E
AV connections
AV1
AV2(Y/C
)
AV2(CVBS
)
For programmes
OK
Back
M
End
E
For programmes
AV control voltage
[ no]
RGB on-screen display
[ no]
For decoder connected to AV1
Sound from AV1
[
Dec .
]
AV Connections (Continued)
[2] For programmes
• The influence of the AV control voltage and of fast blank at programme positions from 1 to 199
can be set.
• When connecting a video device to the AV1 terminal, you need to adjust the decoder programme
settings.
1 Perform steps 1 and 2 in
TEXT
REVEAL
D
L
O
H
T
E
L
IT
T
B
U
S
OK
CH
</>
E
N
D
E
END
MENUSOUND
M
MENU
]/[
OK
[1] AV1/AV2 to display the “AV
connections” screen.
2 Press ]/[ to select “For
programmes”, and then press OK
to display the “For programmes”
screen.
TV/VIDEO
3 Press ]/[ to select the “AV
control voltage” or “RGB onscreen display”.
4 Press </> to select “yes” or “no”.
Note:
• If the item concerned is set to “yes”,
the appropriate picture is throughconnected at all programme
positions from 1 to 199 when a
control voltage/an RGB signal is
applied.
5 Press ]/[ to select “For decoder
connected to AV1”, and then
press OK to display the decoder
programme selection screen.
6 Press ]/[ and/or </> to select
the programme for the decoder,
and then press OK. Repeat the
same procedure if you want to
specify other decoder
programmes.
7 Press MENU to return to the “For
programmes” screen.
For decoder connected to AV1
0
8 E 9 16 E54
0
1 S 6 9 E1 17 E56
0
2 S 8 1 E11 18 E57
3 S1 11 E36 19
0
4 S11 12 E37 2
0
5 E 3 13 E38 21
0
6 E 5 14 E5 22
0
7 E 6 15 E53 23
OK
0
0
0
0
0
E
M
Back
End
8 Press ]/[ to select “Sound from
AV1”, and then press </> to
select the desired sound source.
9 Press END to exit.
35
Useful Features (Continued)
Timer Functions
Press Yellow to display the “Timer
1
functions” screen.
Note:
• The “ Timer functions” screen can
also be displayed by selecting
“Timer functions” in the TV menu.
(see pages 18 and 19.)
2 Press ]/[
then press OK.
3 Input the current time
(HH:MM:SS) with Channel
Select.
SUBTITLE
TEXT
R
E
D
V
L
E
O
A
H
L
T
END
E
OK
END
MENUSOUND
M
]/[
</>
CH
Yellow
OK
Channel
TV/VIDEO
Select
4 Press ]/[ to select the desired
item. (See the table below.)
5 Press </> to make the
adjustment. If you select “00:00”
for “Switch off” or “Alarm”, input
the desired time with Channel
Select.
to select “Time”, and
Timer functions
Time
Switch off [ no
Alarm [ no
Alarm volume [
OK
M
[
Back
: :
0
E
End
]
]
]
]
Adjustment item
Time
Switch off
Alarm
Alarm volume
6 Press END to exit.
Choice/Input value/Value range
HH:MM:SS
no HH:MM
no HH:MM
0 – 39
Description
The time can be manually set.
The LCD TV set automatically turns off at
the specified time everyday.
The alarm sound turns on at the specified
time everyday.
The volume of the alarm sound is selected.
36
Mono
Stereo
Sound 1
Sound 2
Sound 1+2
Mono
Mono
Nicam
Useful Features (Continued)
NICAM Broadcast Selection
This enables the selection of the reception mode when receiving a NICAM-I or NICAM-B/G signal. To let
you enjoy NICAM broadcasting, this LCD TV set receives NICAM system stereo, bilingual, and monaural
broadcasts.
Stereo
TEXT
RE
D
VE
L
O
A
H
L
T
E
L
IT
T
B
U
S
E
N
D
E
OK
MENUSOUND
M
SOUND
CH
Green
The LCD TV set is receiving a stereo
broadcast.
• Each time you press SOUND, the
mode changes between “Stereo”
and “Mono”.
• When “Mono” is selected, the TV
sound is output monaurally.
TV/VIDEO
Bilingual
When the LCD TV set is receiving a
bilingual programme, the “Sound 1”
mode is automatically selected.
• Each time you press SOUND, the
mode changes as follows:
Sound 1 → Sound 2 → Sound 1+2
→ Mono
Monaural
The LCD TV set is receiving a
monaural broadcast.
• Each time you press SOUND, the
mode changes between “Nicam”
and “Mono”.
Note:
• If approximately 3 seconds pass without a button being pressed, the mode setting is automatically terminated and
Note:
the LCD TV set returns to the normal mode.
• The setting can be individually selected for each channel number.
• You can also turn off the NICAM mode by setting the “Loudsp. sound” item to “Mono” in the Sound screen, which is
displayed when you press
Green
(see page 16).
37
Useful Features (Continued)
Mono
Stereo
Sound 1
Sound 2
Sound 1+2
Mono
IGR (German stereo system) Broadcasts
This enables the selection of the reception mode when receiving an IGR-B/G signal. To let you enjoy IGR
broadcasting, this LCD TV set receives IGR system stereo and bilingual broadcasts.
Stereo
TEXT
RE
D
VE
L
O
AL
H
T
E
L
IT
T
B
U
S
E
N
D
E
OK
MENUSOUND
M
SOUND
CH
Green
The LCD TV set is receiving a stereo
broadcast.
• Each time you press SOUND, the
mode changes between “Stereo”
and “Mono.”
• When “Mono” is selected, the TV
sound is output monaurally.
TV/VIDEO
Bilingual
When the LCD TV set is receiving a
bilingual programme, the “Sound 1”
mode is automatically selected.
• Each time you press SOUND, the
mode changes as follows:
Sound 1 → Sound 2 → Sound 1+2
→ Mono
Note:
Note:
• If approximately 3 seconds pass without a button being pressed, the mode setting is automatically terminated and
the LCD TV set returns to normal mode setting.
• The setting can be selected individually for each channel number.
• You can also turn off the IGR mode by setting the “Loudsp. sound” item to “Mono” in the Sound screen, which is
displayed when you press
Green
(see page 16).
38
Loading...