Sharp EL-6910B, EL-6910 Operation Manual

Part Names

• Purple colored functions are operated by
pressing

SHIFT

(“SHIFT” is turned on) and the

appropriate keys.

• In this manual, only the display symbols
necessary for explanation of this product are
shown.

Using the Organizer for the First Time

Be sure to perform the following operations
before using the Organizer for the first time.

1. Remove the isolating film that is affixed to the
battery holder on the back of the unit.

2. Press the RESET switch with a ball-point pen
or similar object.
“RESET?” is displayed.

3. Press

SHIFT ENTER

to initialize the
Organizer.
After “RESET!” is displayed, Home clock is
displayed. (See “Clock Mode”.) You have
deleted all the memory contents now.

NOTES

• If the Organizer is subjected to strong,
extraneous electrical noises or shocks during
use, an abnormal condition may occur in which
no keys (including

ON

OFF

) will respond. Press

the RESET switch and press

SHIFT ENTER

to

delete all the memory contents.

• To minimize battery consumption, the Organizer
is designed to automatically turn off when no
key has been pressed for approximately 7
minutes.

• The key touch tone is turned on and off by
pressing

SHIFT

. When the tone is turned

on, “ ” is turned on.

Entering Characters

• Alphanumeric letters, symbols, and “+ – × ÷ .”
can be entered into the dot display area (the 1st
line).

• Numbers and some characters (only space, –,
and F and P in Telephone mode) can be entered
into the number display area (the 2nd and the
3rd lines).

• Basically letters are entered in capital letters
(“CAPS” is turned on). To enter small letters,
press

CAPS

to turn “CAPS” off.

Entering symbols and letters with an accent
mark

• To enter a symbol, press

SMBL

repeatedly until

the desired symbol appears:
@#$£¥ ( )~’: / \_&<>ß!?

¡¿æµ¢

• To enter a letter with an accent mark, press

SHIFT SHIFT

to turn “SHIFT LOCK” on, and
press the appropriate key repeatedly. (Refer to
the “QUICK REFERENCE GUIDE” inside the
cover.)

• To turn “SHIFT LOCK” off, press

SHIFT

again.

Making corrections

Move the cursor to the character to be corrected.
Enter the correct character to replace the previous
one.

Cursor

The cursor (_) indicates the position for entering a
character. Move the cursor with the cursor keys
( ).

Inserting characters

Each time

INS

is pressed, a space is inserted at
the cursor position to allow you to enter a
character.

Deleting characters

Press

DEL

to delete the character at the cursor
position.
Press

C•CE

to clear all the characters that you

have entered and not stored yet.
Press BS to delete the character at the left of the

cursor.

q Power ON/OFF key
w Cursor keys
e Search keys
r Mode keys
t RESET switch
y TRANSLATOR key

The following notations are used for
key operations.

CM

: Clear memory

(in Calculator mode)

U

: Letter “U”

Telephone Mode

Telephone mode is composed of two directions of
storage memory. Pressing

TEL

toggles between
“1” and “2” on the display.
Use these files for convenience, e.g. business
and private files.
A telephone entry consists of name, address,
E-mail address, web address (URL) and number
fields.

Storing telephone entries

1. Press

TEL

once or
twice to display the
Telephone mode
screen.

2. Enter the name, e.g. SMITH

SPACE

ROBERT,

and press

ENTER

.

3. Enter the address, e.g. 18

SPACE

EAST

SPACE

ROAD, and press

ENTER

.

4. Enter the E-mail
address, e.g.
SROB

SMBL

(to enter “@”)
SHARPSEC.COM, and press

ENTER

.

• The E-mail address is automatically entered

in small letters.

• To enter “@”, simply press @ instead of

SMBL

.

5. Enter the web address (URL), e.g.
WWW.SHARP-USA.COM, and press

ENTER

.

Schedule Mode

Schedule mode is used for storing schedule
details (36 characters or under), date and time
(year, month, day, hour, and minute).
In the 1st line the same characters are allowable
as in Telephone mode.

1. Storing schedule entries

1. Press

SCHEDULE

to
display the Schedule
mode screen.

2. Enter the details and
press

ENTER

.

3. Enter the date and time.

• The types of date and time are the same as

the types set for the clock.

• To enter a single-digit date or time, enter “0”

and the digit (e.g. “O2”).

Memo Mode

Notes or other pieces of information that are not
appropriate for Telephone or Schedule mode can
be entered for convenience.
In the 1st line the same characters are allowable
as in Telephone mode. In the 2nd and the 3rd
lines you can enter numbers, –, and space. (36
characters or under can be entered in each line.)

Storing memo entries

1. Press

MEMO

to
display the Memo
mode screen.

2. Enter the memo item
and numbers.
E.g. UNION

SPACE

BANK

ENTER

01
272-0011223

3. Press

ENTER

to store in the memory.

Notes for storing and recalling entries

• When the memory is full, “MEMORY FULL!”
appears briefly, and the entry cannot be stored.

• When the symbol “ ” or “ ” is turned on,
more information exists. Press or to
switch the display.

Checking details of entries in Telephone mode

• To display each field on the 1st line, follow the
symbol “ ” or “ ” and press or . (The
symbol above the 1st line shows each field.)

• Pressing

E-MAIL

displays the E-mail address
on the 1st line directly.
Pressing

E-MAIL

(

WWW

) again displays the
web address (URL) on the 1st line. Each time
you press

E-MAIL

(

WWW

), the display
switches between the E-mail and the web
addresses.

• Press and hold to start the auto scroll on the
1st line. Press again to stop or restart the
scroll. Press

C•CE

to quit the auto scroll.

Guidance messages can be displayed in 7
languages – English, Dutch, Portuguese, Italian,
German, French, and Spanish. After initializing the
Organizer, the default setting is English.

Changing the Guidance Language

To change the language, press

SHIFT LANGUAGE

followed by

PREV

or

NEXT

to select the

desired language, then press

ENTER

.

6. Enter the phone

number, and then
the fax number if
needed, e.g.

012-3456-7890
F

SPACE SPACE

SPACE

3456-7891, and

press

ENTER

.

• “STORED!” appears briefly, then the Telephone
mode screen is displayed. The telephone entry
is now stored.

Notes

• The symbol “NAME”, “ADDRESS”, “E-mail”, or
“URL” is turned on while entering in each field.

• To skip entry of an address, E-mail address,

web address (URL), or number, press

ENTER

when “ADDRESS?”, “E-MAIL?”, “URL?”, or
“NUMBER?” is displayed. However, entering a
person’s name cannot be skipped.

Allowable
characters

The 1st line:
Name, address,
E-mail address
and web address
(URL)

Field

Number of
characters

The 2nd and the
3rd lines:
Phone number

36 characters
or under

Alphabetic letters,
numbers, symbols,
“+ – × ÷ .”, space

Numbers, space, –,
F (Fax), P (Pager)

PRINTED IN CHINA/IMPRIMÉ EN CHINE

02BTO (TINSE0522EHZZ)

EL-6910 English Front sheet

OPERATION MANUAL

ELECTRONIC ORGANIZER

EL-6910

In Europe:

This equipment complies with the requirements of
Directive 89/336/EEC as amended by 93/68/EEC.

Dieses Gerät entspricht den Anforderungen der EG­Richtlinie 89/336/EWG mit Änderung 93/68/EWG.

Ce matériel répond aux exigences contenues dans la
directive 89/336/CEE modifiée par la directive 93/68/
CEE.

Dit apparaat voldoet aan de eisen van de richtlijn 89/336/
EEG, gewijzigd door 93/68/EEG.

Dette udstyr overholder kravene i direktiv nr. 89/336/EEC
med tillæg nr. 93/68/EEC.

Quest’ apparecchio è conforme ai requisiti della direttiva
89/336/EEC come emendata dalla direttiva 93/68/EEC.

Η εγκατάσταση αυτή ανταποκρίνεται στις απαιτήσεις
των οδηγιών της Ευρωπαïκής Ενωσης 89/336/ΕΟΚ,
!πως ο κανονισµ!ς αυτ!ς συµπληρώθηκε απ! την
οδηγία 93/68/ΕΟΚ.

Este equipamento obedece às exigências da directiva 89/
336/CEE na sua versão corrigida pela directiva 93/68/
CEE.

Este aparato satisface las exigencias de la Directiva 89/
336/CEE modificada por medio de la 93/68/CEE.

Denna utrustning uppfyller kraven enligt riktlinjen 89/336/
EEC så som kompletteras av 93/68/EEC.

Dette produktet oppfyller betingelsene i direktivet 89/336/
EEC i endringen 93/68/EEC.

Tämä laite täyttää direktiivin 89/336/EEC vaatimukset,
jota on muutettu direktiivillä 93/68/EEC.

Note

• This model may not be available in some
countries.

3. Using World clock

1. Press

CLOCK

once or twice to display World

clock (without “

”).

2. Press

PREV

or

NEXT

to select the

desired city.

4. Changing the cities between Home
and World clocks

You can change the home city for a city in another
time zone without adjusting the stored correct
time.

1. Press

CLOCK

once or twice to display World

clock (without “

”).

2. Press

PREV

or

NEXT

and select the

desired city to be set as the new home city.

3. Press

SHIFT SET

to change the cities

between Home and World clocks.

• The previous home city is now set as the

world city (without “ ”).

4. Press

CLOCK

to check the home city.

• The selected city in step 2 is set as the home

city (with “

”).

5. Press

CLOCK

to recheck the world city, and

press

PREV

or

NEXT

to select the new

world city, if needed.

5. Setting daylight saving time (DST:
summer time)

1. Press

CLOCK

once or twice to display Home

or World clock.

2. Press

DST

.
“#” is displayed. The time is set 1 hour ahead.
To clear DST, press

DST

to clear “#”. The time

is set 1 hour behind.

Notes

• DST can be set independently in either Home or
World clock.

• When DST is set for one world city, it is used
for all cities displayed in World clock.

6. Setting alarms

The Organizer has 3 kinds of alarm:

1. Daily alarm ........beeps ever y day at the alarm

time (for 1 minute), when
“ ” is turned on.

2. Hourly alarm...... beeps every hour when

minutes reach “00”, when
“ ” is turned on.

3. Schedule alarm.. beeps at the time for all the
schedule entries (for 1
minute), when “ ” is
turned on. (Refer to
“Schedule Mode”.)

Press any key to stop the alarm beeping.

Setting/Changing the daily alarm time

1. Press

CLOCK

once or twice to display Home

clock (with “

”).

2. Press

ALARM

to
display the daily
alarm screen.
(The display differs
between the 12-hour and 24-hour clock.)

3. Press

SHIFT SET

.

4. Enter the time.

5. Press

ENTER

.

• The daily alarm time is set.

Turning the alarms on and off

An alarm sounds only when the respective symbol
(

, , or ) is turned on.

Display Home clock (press

CLOCK

once or twice)

and press

ALARM

to display the daily alarm
screen.
Each time you press

ALARM

while the daily alarm
screen is displayed, the combination of symbols
switches.

Note

• Alarms sound even when the Organizer is

turned off.

Recalling entries – Telephone, Schedule, Memo –

First press the desired mode key.

NEXT

: Recalls entries in forward order

PREV

: Recalls entries in reverse order

Sequential search

Press

NEXT

or

PREV

in each mode.

Direct search

• Enter the first characters (8 characters or
under) of the person’s name, schedule details,
or memo item, and press

NEXT

or

PREV

. Then press

NEXT

or

PREV

to

continue performing a direct search.

Sorting order

• Telephone and memo entries are stored by the
first character of the person’s name or memo
item in the following order (case sensitive):

• Schedule entries are stored by date and time.

Note

• When there is no (further or relevant) entry to
be recalled, “NOT FOUND!” appears briefly, and
the display returns to the mode screen.

1

2

3
4

5

ALARM

A12–00

NAME?

harpsec.com

_

NUMBER?

2–3456–7890
3456–7891

_

SCHEDULE?

4. Press

ENTER

to store in the memory.

Notes

• Schedules for the following dates can be stored:
January 1901 to December 2098.

• If an attempt is made to store an entry without a
date or time, or with an invalid date or time,
“ERROR!” appears briefly. Enter the correct
date and time and press

ENTER

.

2. Alarm for Schedule mode

When the schedule alarm (“ ”) is turned on, it
is set for all the schedule entries. Beeping sounds
for 1 minute when the time for a schedule entry is
reached. Press any key to stop the alarm. The
schedule alarm cannot be set for an individual
entry.

MEMO?

UNION BANK

01
272–0011223

_

Clock Mode

Each time you press

CLOCK

, the clock switches
between Home and World clocks. (For World
clock, “ ” is not displayed.)

1. Before setting the clock

• The default setting for the date is “YYYY/MM/

DD” (year-month-day). To change the setting to
“MM/DD/YYYY” (month-day-year) or “DD/MM/
YYYY” (day-month-year):

1. Press

CLOCK

once or twice to display

Home clock (with “ ”).

2. Press

DATE TYPE

.

3. Press

PREV

or

NEXT

to select the

desired type.

4. Press

ENTER

to store the new setting.

• To change the 12-hour clock to the 24-hour

clock, press

12 24

(“A” or “P” is cleared).

Each time you press

12 24

, the clock

switches.

• In the period of daylight saving time/summer

time, press

DST

in advance (“#” is displayed).

2. Setting the clock

1. Press

CLOCK

once or twice to display Home

clock (with “ ”).

2. Press

SHIFT SET

to start setting.

The cursor starts to flash on the city name.

Home clock

Home city (with “ ”) Day of the week

Time

Date

3. Press

PREV

or

NEXT

to select the
desired time zone. (Refer to the list of cities
described below.)

• Enter the city name, if needed (6 characters

or under). Only one changed name for Home
clock can be stored.

4. Press to move the cursor to the year.

5. Enter the year (4 digits), the month, and the
day (2 digits each).

• The built-in calendar extends from January

1st, 1901, to December 31st, 2098.

6. Press

AM/PM

to select “A” (morning) or “P”

(afternoon) for the 12-hour clock.

7. Enter the time (hours and minutes).

Note:

P12-00: noon, A12-00: midnight

8. Press

ENTER

. The clock starts from “00”

seconds.

Notes

• To enter a single-digit date or time, enter “0”

and the digit (e.g. “02”).

• If you enter an invalid date or time, “ERROR!”

appears briefly. Enter the correct date and time
and press

ENTER

.

LON WED

2003– 1– 1
A12–00–00

Zone Display City Zone Display City
No. No.

0 TNG TONGA 10 MOW MOSCOW
1 WLG

WELLINGTON

11 CAI CAIRO
2 NOU NOUMEA 12 PAR PARIS
3 SYD SYDNEY 13 LON LONDON

3.3 ADL ADELAIDE 14 AZ0

AZORES ISLANDS

4 TYO TOKYO 15 -2H

2hrs behind LON

5 HKG

HONG KONG

16 RIO

RIO DE JANEIRO

6 BKK BANGKOK 17 CCS CARACAS

6.3 RGN YANGON 18 NYC NEW YORK
7 DAC DHAKA 19 CHI CHICAGO

7.3 DEL

NEW DELHI

20 DEN DENVER

8 KHI KARACHI 21 LAX LOS ANGELES

8.3 KBL KABUL 22 ANC ANCHORAGE
9 DXB DUBAI 23 HNL HONOLULU

9.3 THR TEHRAN 24 MID MIDWAY

• SHARP assumes no responsibility, directly or
indirectly, for financial losses or claims from
third persons resulting from the use of this
product and any of its functions, such as stolen
credit card numbers, loss or alteration of stored
data, etc.

• The information provided in this manual is
subject to change without notice.

NOTICE

• SHARP strongly recommends that separate
permanent written records be kept of all
important data. Data may be lost or altered in
virtually any electronic memory product under
certain circumstances. Therefore, SHARP
assumes no responsibility for data lost or
otherwise rendered unusable whether as a
result of improper use, repairs, defects, battery
replacement, use after the specified battery life
has expired, or any other cause.

➝

➝

SHIFT

: Turn the touch tone on

and off

V

: Letter “V”

➝

➝

1. Setting a currency rate

1. Press

CALC/CONV

several times to
display the currency
conversion mode
screen (refer to “Calculator mode”).

Example:

1 CAD (Canada dollars)
= 0.66 USD (US dollars)

2. Press

NEXT

NEXT NEXT

to change

the display and press

SHIFT SET

. The initial

character of “CAD” starts to flash.

• You can change each currency name by
entering characters (up to 4 in each) and
using

, if needed.

3. Press

ENTER

. “0” starts to flash.

4. Enter the rate (up to
10 digits).

0.66

5. Press

ENTER

to

store in the memory.

2. Converting currency/unit

You need to set the conversion rate before making
the currency conversion.

Example:

Convert 500 CAD into USD using the
rate that you have set.

1. Display the screen: “CAD → USD”.

2. Enter the value to be converted.

500

3. Press

to convert

CAD into USD.

• To convert in
reverse order (e.g.
200 USD into CAD), enter 200 and press

.

• You can use the unit conversion in the same
manner. You cannot change the units or the
rates for units.

• The conversion result may have a slight error
as a result of rounding off the number (e.g. up
to 2 decimal places for currency conversions).
Use the conversion result for reference.

Memory Storage

1. Checking memory storage

1. Press

TEL, SCHEDULE

, or

MEMO

to display

“NAME?”, “SCHEDULE?”, or “MEMO?”.

2. Press

SHIFT M•CK

.
The number of
remaining bytes is
displayed briefly.

Notes

• The Organizer can store up to 66838 bytes in
the memory (excluding the Calculator mode
memory).

• One byte is required per character (in the 1st
line) for telephone, schedule, and memo
entries.

• One byte is required for 2 digits in the number
part (in the 2nd and the 3rd lines) of telephone
and memo entries. (When there is an odd
number of digits in a number entry, the last
digit occupies 1 byte.)

• In addition to the memory size for characters
(in the 1st line) and numbers (in the 2nd and
the 3rd lines), each entry requires the following
memory size:

Telephone entry .....6 bytes

Schedule entry....... 8 bytes (including date

and time)

Memo entry ........... 3 bytes

2. Deleting all the memory contents

Perform steps 2 and 3 as described in the section,

“Using the Organizer for the First Time”.

• To cancel the deletion operation, press

C•CE

instead of

SHIFT ENTER

in step 3.

Secret Function

Replacing Battery

Battery used

Type Model Quantity

Lithium battery CR2032 1

•

Improper replacement of the battery may
change or lose the memory contents.

•

Be sure to write down any important
information stored in the memory before
replacing the battery.

•

Make sure the power is turned off before
replacing the battery.

•

Do not press

ON

OFF

until the battery replacement

procedure is completed.

1. Precautions

Since improper use of the battery may cause
leakage or explosion, strictly observe the
following instructions.

• Insert the battery with the positive side (+)
correctly facing up.

• Never throw the battery into a fire because it
might explode.

• Keep the battery out of the reach of children.

Because the battery in the Organizer was installed
at the factory, it may become depleted before the
specified expiration time is reached.

2. Battery replacement

If the display becomes dim and difficult to read,
immediately replace the battery with a new one.
Continued use of the Organizer with an exhausted
battery can alter or clear the memory contents.

1. Press

ON

OFF

to turn the power off.

2. Loosen the screw and remove the battery
holder cover on the back of the unit. (Slide the
cover off.)

3. Install a new battery with the positive side (+)
facing up into the upper or lower empty holder.
(Fig. 1)

4. Remove the exhausted battery by prying it out
with a ball-point pen. (Fig. 2)

5. Replace the holder cover and secure it with the
screw.

6. Press

ON

OFF

to turn the power on.

• If nothing appears on the display, press the

RESET switch and press

C•CE

.

• Do not press

SHIFT

ENTER

. Pressing

SHIFT ENTER

clears all the memory

contents.

7. Set the clock.

Fig. 1 Fig. 2

Specifications

• Model: EL-6910

• Product name: Electronic Organizer

• Display: 3 lines of 12 digits

• Memory capacity: 66838 bytes

• Clock mode:

Accuracy: ± 60 seconds/month at 25°C/77°F
Display: Year, month, day, day of the

week, hour, minute, second, AM/PM
Clock function: 12-hour/24-hour format
(switchable), 3 kinds of date type
(switchable), world clock function, daylight
saving time (summer time) display, daily
alarm, hourly alarm

• Telephone mode: Entering and recalling of
telephone entry (name, address, E-mail
address, phone number, and web address
(URL))

• Schedule mode: Entering and recalling of
schedule entry (details, year, month, day, hour,
and minute), schedule alarm

• Memo mode: Entering and recalling of memo
entry

• Calculator mode: 10 digits (with calculation
status symbols), arithmetical calculations,
percentage, square root, memory calculation,
etc.

• Currency/unit conversion mode:

5 kinds of currency conversion (editable) and 9
kinds of unit conversion

• Game mode: 2 games

• Word Translation function:

Approx. 1200 words each

• Power consumption: 0.003 W

• Operating temperature: 0°C to 40°C

(32°F to 104°F)

• Power supply: 3V … (DC),

lithium battery

CR2032 × 1

• Auto-power off: Approx. 7 minutes

• Battery life: Approx. 2 years at ambient

temperature of 25°C/77°F, assuming the
following daily use: 30 minutes display, alarm
sounding for 20 seconds and key touch tone
turned on/off 100 times.

• Weight (including battery):
Approx. 105 g (0.23 lb.)

• Dimensions:

Open:

143.0 mm (W) × 169.5 mm (D) × 9.5 mm (H)
5-5/8" (W) × 6-23/32" (D) × 3/8" (H)

Closed:

143.0 mm (W) × 88.0 mm (D) × 13.25 mm (H)
5-5/8" (W) × 3-15/32" (D) × 17/32" (H)

• Accessories: 1 lithium battery (installed),
operation manual

Currency/Unit Conversion Mode

Caring for Your Organizer

• Do not carry the Organizer in the back pocket of
slacks or trousers.

• Do not drop the Organizer or apply excessive
force to it.

• Do not subject the Organizer to extreme
temperatures.

• Since this product is not waterproof, do not use
it or store it where fluids can splash onto it.

• Clean only with a soft, dry cloth.

• Use only a SHARP approved service facility.

Calculator Mode

The Organizer can
calculate numbers of up
to 10 digits. Press

CALC/CONV

several
times to display the Calculator mode screen
(Calculator → Currency conversion → Unit
conversion → Calculator...).

Calculation

Be sure to press

C•CE, C•CE

, and CM to clear
the display and memory before performing a
calculation.

Note

• When , , , or is pressed, the respective

symbol, +, –, ×, or ÷ is displayed. (In the
examples in this manual, these symbols are not
described.)

If an error occurs

If the calculation result or the integer section in
the numerical value in the memory exceeds 10
digits or if a number is divided by zero (0), an
error occurs (“ERR” is displayed).

Calculation examples

Example Operation

Display

(–24+2)÷4=–5.5

C•CE

24 2 4

–5.5

34+57=91 34 57

91.

45+57=102 45

102.

(The addend becomes a
constant.)

68×25=1700 68 25

1700.

68×40=2720 40

2720.

(The multiplicand becomes
a constant.)

200×10%=20 200

10

%

20.

9÷36=25% 9 36

%

25.

200+(200×10%)=220

200 10

%

220.

500–(500×20%)=400

500 20

%

400.

46=(43)2=4096 4

4096.

1/8=0.125 8

0.125

25×5=125CM25 5

M

+

M

125.

–)84÷3=28 84 3

M

–

M

28.

+) 68+17=85 68 17

M

+

M

85.

182

RM

M

182.

25–9=4 25 9

앀앙

4.

1234567890×145 1234567890 145

ERR

=179012344050

17.90123440

C•CE

17.90123440

(17.90123440×1010=179012344000)

앀앙앙

Editing or deleting entries – Telephone, Schedule, Memo –

Editing

1. Recall the entry to be edited.

2. Press

EDIT

. The cursor starts to flash.

• In Telephone mode press

ENTER

several
times to display each field (the address field
and so on).

3. Press , , , or to move the cursor to
the position to be edited.

4. Enter, insert, or delete characters (refer to

“Entering Characters”).

• To cancel editing, press

C•CE

.

5. Press

ENTER

several times (until “STORED!”
appears briefly) to finish editing and to store
the entry.

Deleting

1. Recall the entry to be deleted.

2. Press

DEL

.

•“DELETE?” is displayed.

• To cancel the deletion operation, press

C•CE

.

3. Press

ENTER

to delete the entry.

1. Registering a password and storing
secret entries

Up to 6 characters can be registered as the
password.

• One password is valid for Telephone, Schedule,

and Memo modes.

If the password is forgotten, you cannot delete the
password only. You have to delete all the memory
contents. (Perform steps 2 and 3 as described in
the section, “Using the Organizer for the First
Time”.) As a safeguard, make a written record of
the password.

Registering a password

1. Press

TEL, SCHEDULE

, or

MEMO

to display
“NAME?”, “SCHEDULE?”,
or “MEMO?”.

2. Press

SECRET

.

3. Enter the password (case sensitive), e.g. ABC.

4. Press

SECRET

to register it.

• The display returns to the screen in step 1

with the symbol “ ”.

• If “ERROR!” appears briefly, a password has

already been registered. Enter the correct
password or delete the password and all the
memory contents.

5. Press

SECRET SECRET

to turn Secret

function on. “

” disappears.

Storing secret entries

1. Enter characters in Telephone, Schedule, or
Memo mode when “ ” is not displayed
(Secret function is on).

• When “ ” is displayed, press

SECRET

SECRET

to turn Secret function on.

2. Press

SECRET

before pressing

ENTER

to

store. “

” appears.

3. Press

ENTER

to store a secret entry in the

memory.

•“STORED!” appears briefly, and the display

returns to the mode screen without “ ”
(Secret function is on).

• You cannot display the secret entry until you

turn Secret function off.

2. Turning Secret function on and off

When Secret function is on, “ ” is not
displayed.

• You can display, edit, or delete entries
except secret entries.

• You can enter new entries as secret or
non-secret.

When Secret function is off, “ ” is
displayed.

• You can display, edit, or delete secret
entries only. (You cannot display non­secret entries.)

• You cannot enter a new entry.

Turning Secret function off

1. Press

TEL

,

SCHEDULE

, or

MEMO

and check

that “ ” is not displayed.

2. Press

SECRET

. “PASSWORD?” is displayed.

3. Enter the password and press

SECRET

.

•“ ” is displayed and you can display
secret entries.

• If you enter an incorrect password,
“ERROR!” appears briefly. Follow the above

steps and enter the correct password.

• Even when Secret function is turned off, it
will be automatically turned on (“ ” will
disappear):

A)when you press

GAME, CLOCK

, or

CALC/CONV

,

or B)after the power is turned off manually

or automatically.

Turning Secret function on

1. Press

TEL

,

SCHEDULE

, or

MEMO

and check

that “ ” is displayed.

2. Press

SECRET

.

The password is displayed. Memorize it again.

3. Press

SECRET

again.

“

” disappears and you cannot display

secret entries.

3. Changing the password

1. Turn Secret function off (“ ” appears).

2. Press

SECRET

. The password is displayed.

3. Press

EDIT

.
The initial character of the password starts to
flash.

4. Enter, or edit characters and make a new
password.

5. Press

SECRET

. The new password is now

registered.

EL-6910 English Rear sheet

0

.

066

.

CAD USD

330

.

CAD USD

Game Mode

Press

GAME

to play the game “BLACKJACK”.

Each time you press

GAME

, the display switches

between “ALPHA ATTACK” and “BLACKJACK”.

BLACKJACK (Twenty-one)

Make your “hand” (the total of the numbers on
the cards) close to 21, without going over 21.

1. Press

GAME

to
display the following
Game mode screen.

2. Press

ENTER

to
start a game. The left
2 cards are dealt for you. (One is facing up and
one is facing down.)

3. Agree the left-displayed maximum bet (up to

10) or enter the fewer bet. Pressing also
can bet to the maximum.

4. Press

SPACE

to
see your hand.
Each time you
press

SPACE

, a
new card is dealt.

•“J”, “Q”, and “K”

are counted as 10.

•“A” can be counted as 1 or 11.

• When first 2 cards are “A” and a face card

(“J”, “Q”, or “K”), your hand is
“BLACKJACK”.

5. Press

ENTER

to
stop being dealt and
hold your hand. The
dealer’s hand and
the results are
displayed.

• When you win,

your total flashes and your bet is doubled.

• When you win with “BLACKJACK”, your bet

is tripled.

6. Press

ENTER

and display the Game mode
screen.

• When you have no more chips to bet, the

game is over.

J28 32K4

20 19
20 20

Your chipsYour bet

The dealer’s
total

Your total

CAPACITY

6254

PASSWORD?

SHARP CORPORATION

0

.

EURO USD

BLACKJACK

30

Your chips

J28 4

10 20

Your chipsYour bet

The dealer’s
hand

Your hand

Word Translation Function

This device offers an English-Spanish bi­directional word translation function.

1. Press to enter the English ➝ Spanish
translation mode.

Press twice (or then ) to
enter Spanish ➝ English mode.

2. Enter the desired source word and press

ENTER

.
“English…” or “Spanish…” is displayed while
conducting search. The matching
English or Spanish word will then be displayed.

• When the symbol “ ” is turned on, more

letters exist. To view remaining letters of long
words that cannot be accommodated on the
screen, use to scroll right.

• If there is no matching word, “NOT FOUND!”
is displayed. The word next in alphabetical
order will then be displayed.

• Press

NEXT

or

PREV

to scroll through
word list, or edit entry using the keyboard,
and press

ENTER

for another search.

• Press or to return to the source word.

Caution

• Spanish words stored in this device are
those of Spain.

• Only the masculine form of the noun will be
displayed for nouns with both masculine and
feminine forms.

• Sometimes, two identical words will appear
in the word list.

• Enter European characters and spaces
correctly. Otherwise, the unit may not be able
to complete the search.

ENG SPA

• To quit the game, press

C•CE

or any mode

key. Your chips are stored for the next time.

• To return your chips to 30, press

DEL

and

ENTER

on the Game mode screen.

ALPHA ATTACK

Type in characters (A to
Z, 0 to 9) displayed on
the 1st line to clear
them. The game is
divided into 20 levels in
speed.

1. Press

GAME

to display the following Game

mode screen.

2. Enter the level
number (2 digits
from 01 to 20).

• 01: slow, 20: fast

3. Press

ENTER

to start a game.

4. Press the same key as the first character at the
left end of the 1st line. (In this case, press keys
in the order: E → Y → 3 → K → W.)

• Pressing the correct key in the correct order

deletes the character.

• When 12 characters are displayed in each

level, the game continues in the faster level
(up to 20).

• When no more characters can be displayed,

the game is over. The Game mode screen
with the level when the game is over is
displayed.

ALPHA ATTACK

01

Level

EY3KW

01