Sharp DV-SL1000W Operating Instruction

P
knah
T
r
t
o
sih
p
.tcudorp
crup rof uoy
tcud
,
sah
er esaelp
HS siht gni
R
A
u
r
a
ht da
m s
i
fe
la
ac
n
oT
.tcudorp
i
l
w tI
l
.y
u
eht niatbo
ed
ni uoy
iug ll
rof
seb
rep t
r
gnita
epo
mo
cnam
rf e
H
r
oy
PR
A
S
u
V
D
D W
P
D
EDOM
L
V
-
T
PO
ARE
OI
YAL
S
E
R
UNAM N
1
LA
0
00
N
OITAROPROC PRAHS
LS-
VD
revoc B_F 007
1
:5 ,60/02/2
MP 65
DV-SL1000W
ENGLISH
Special notes
CAUTION
I This product is classified as a CLASS 1 LASER product. I This product contains a low power laser device. To ensure continued safety
do not remove any cover or attempt to gain access to the inside of the prod­uct. Refer all servicing to qualified personnel.
WARNINGS
I When the ON/STAND-BY button is set at STAND-BY position, mains voltage
is still present inside the unit. When the ON/STAND-BY button is set at STAND-BY position, the unit may be brought into operation by the remote control.
I This unit contains no user serviceable parts. Never remove covers unless
qualified to do so. This unit contains dangerous voltages, always remove mains plug from the socket before any service operation and when not in use for a long period.
I To prevent fire or shock hazard, do not expose this appliance to dripping or
splashing. No objects filled with liquids, such as vases, shall be placed on the apparatus.
NOTE
Audio-visual material may consist of copyrighted works which must not be recorded without the authority of the owner of the copyright. Please refer to the relevant laws in your country.
Accessories
Please confirm that the following accessories are included.
Remote control x 1
Audio / Video cable x 1
(UM-4, R03, HP-16 or similar ) x 2
“AAA”
Important Instruction
E-1
DV-SL700 01-16 2/9/06, 2:26 PM1
Note:
Only the above accessories are included.
Contents
H General Information Page
Precautions ................................................................................... 3
Types of playable discs ............................................................... 4
Description of discs ..................................................................... 5
Controls and indicators ......................................................... 6 - 7
H System Connections
Connecting to a conventional TV ......................................... 8 - 11
Connecting to a TV with Progressive-Scan Capability ... 12 - 13
Additional connections ...................................................... 14 - 18
H Preparation for Use
Battery installation ..................................................................... 19
Turning the power on .................................................................19
Changing the system setup ............................................... 20 - 26
General control ........................................................................... 27
H DVD Operation
DVD playback
Playback .............................................................................. 28 - 29
To resume playback after stopping (resume play) .................. 29
DVD mode operation indicators ................................................29
Basic operation
To locate the beginning of a chapter (track) (skip) ................. 30
Fast forward/Fast backward (search) ....................................... 30
To start playback from the desired point (direct play) ............ 31
Useful operation
Still picture .................................................................................. 32
Slow-motion play ........................................................................32
To change the angle ...................................................................33
To zoom images (zoom) ............................................................. 33
To play repeatedly (repeat play) ................................................ 34
To play the contents between the specified points repeatedly
(A-B repeat) ................................................................................. 35
To select a title from the top menu of the disc ........................ 35
To select a subtitle or audio language from the disc menu ... 35
Various settings
To change the subtitle language ............................................... 36
To change the audio language (audio output) ........................ 36
H Video CD and Super Video CD Operation
Video CD and Super Video CD operation
Playback of a video CD (super video CD) with P.B.C. ON ...... 37
To change the audio channel .................................................... 38
To change the display on TV screen ........................................ 38
To play without activating the playback control function ...... 39
To start playback from the desired point (direct play) ............ 39
H CD, CD-R and CD-RW Operation
CD operation
To play in the desired order (programmed play) .....................40
JPEG disc operation
Playback on the JPEG menu screen ................................ 41 - 42
Zoom function ............................................................................. 43
H Advanced Features
Enjoying various sounds ...........................................................44
H References
Troubleshooting chart........................................................ 45 - 46
Error indicators and warnings .................................................. 47
Maintenance ................................................................................47
Specifications ............................................................................. 47
Copyright ..................................................................................... 48
DV-SL1000W
ENGLISH
Page
General Information
DV-SL700 01-16 2/9/06, 2:26 PM2
E-2
DV-SL1000W
ENGLISH
Precautions
H General
II
I Please ensure that the equipment is positioned in a well ventilated area
II
and ensure that there is at least 10 cm (4") of free space along the sides, top and back.
II
I The ventilation should not be impeded by covering
II
the ventilation openings with items, such as newspapers, tablecloths, curtains, etc.
10 cm (4")
II
I Use the unit on a firm, level surface free from vibration.
II
II
I Keep the unit away from direct sunlight,
II
strong magnetic fields, excessive dust, humidity and electronic/electrical equipment (home computers, facsimiles, etc.) which generate electrical noise.
II
I Do not place anything on top of the unit.
II II
I Do not expose the unit to moisture, to temperatures higher than 60°C (140°F)
II
General Information
or to extremely low temperatures.
II
I If the unit does not work properly, disconnect the AC power lead from the
II
wall socket. Plug it back and turn on the unit.
II
I In case of an electrical storm, unplug the unit for safety.
II II
I Hold the AC power plug by the head when removing it from the wall socket,
II
as pulling the lead can damage internal wires.
II
I Do not remove the outer cover, as this may result in electric shock.
II
Refer internal service to your local SHARP service facility.
10 cm (4")
EJECT PLAY/PAUSE STOP ON/STANDBY
STANDBYPLAY/ PAUSE
15 cm (6")
10 cm (4")
II
I No naked flame sources, such as lighted candles, should be placed on the
II
apparatus.
II
I Attention should be drawn to the environmental aspects of battery disposal.
II II
I This unit should only be used within the range of 5°C - 35°C (41°F - 95°F).
II
Warning:
The voltage used must be the same as that specified on this unit. Using this product with a higher voltage other than that which is specified is dangerous and may result in a fire or other type of accident causing damage. SHARP will not be held responsible for any damage resulting from use of this unit with a voltage other than that which is specified.
H Care of DVD/CD discs
DVD/CD discs are fairly resistant to damage, however mistracking can occur due to an accumulation of dirt on the disc surface. Follow the guidelines below for maximum enjoyment from your DVD/CD collection and player.
II
I Do not write on either side of the disc, particularly the non-label side from
II
which signals are read. Do not mark this surface.
II
I Keep your discs away from direct sunlight, heat, and excessive moisture.
II II
I Always hold the DVD/CDs by the edges. Fingerprints, dirt, or water on the
II
DVD/CDs can cause noise or mistracking. If a DVD/CD is dirty or does not play properly, clean it with a soft, dry cloth, wiping straight out from the centre, along the radius.
NO
YES Correct
E-3
DV-SL700 01-16 2/9/06, 2:26 PM3
Types of playable discs
The DVD player can play back discs bearing any of the following marks:
Disc type
DVD Video Disc
Disc contents
Audio and video
(movies)
DV-SL1000W
ENGLISH
Types of playable DVD discs vary depending on the region. This unit can play
back only DVDs with the same region number as written on the back of the unit.
Super Video CD
Video CD
Audio CD
CD-R/CD-RW (*1) Audio and picture
General Information
Or CD-R/CD-RW recorded in
JPEG format (*2) (*3)
(*1): The CD-R/CD-RW may not be played back properly depending on the
recording equipment or the disc.
(*2): JPEG or JPG picture discs also play on this unit. However, pictures may
not be clear (depends on resolution and recording method).
(*3): JPEG maximum resolution limit at 2Mb file size.
If photo bigger than this size, a dialog box will appear to display “over file size” and go to next picture.
I I
I For unplayable discs, see page 5.
I I
Audio and video
(movies)
Audio and video
(movies)
Audio
or
2
Icons used in this operation manual Some functions may not be available depending on discs. The following icons
indicate the discs that can be used in the section.
... Indicates DVDs.
... Indicates Super video CDs.
... Indicates video CDs.
... Indicates audio CDs.
... Indicates CD-R/RW with JPEG recording.
I Some operations may not be performed depending on discs even if they are
described in this manual.
or
3
5
I During operation, “INVALID KEY” may be displayed on the screen. This
means that the operations described in this manual are not possible.
General Information
E-4
DV-SL700 01-16 2/24/06, 4:48 PM4
DV-SL1000W
ENGLISH
Description of discs
H Discs that cannot be played
II
I
DVDs without the region number on
II the back of the unit or “ALL”. I I
I DVDs with SECAM system
I I I I
I DVD-ROM
I I I I
I DVD-RAM
I I I I
I DVD-Audio
I I
II
I The discs above cannot be played at all, or no sound is heard although
II
images appear on the screen or vice versa.
II
I Incorrect operation may damage the speakers and can have a negative
II
effect on your hearing when played at high volume settings.
II
I You cannot play illegally produced discs.
II
Notes:
II
I A disc with has scratches or fingerprints may not play properly. Refer to
II
“Care of DVD/CD discs (page 3)” and clean the disc.
II
I Do not play the discs of special shapes (heart or octagon shaped) as they
II
can be ejected whilst rotating and cause injury.
Title, chapter and track
DVDs are divided into “titles” and “chapters”. If the disc has more than one movie on it, each movie is a separate “title”. “Chapters” are subdivisions of titles.
General Information
Title 1 Title 2
Chapter 1
Chapter 2 Chapter 3 Chapter 1 Chapter 2
Audio CDs consist of “tracks”. A “track” is each tune on an audio CD.
Track 1 Track 2 Track 3 Track 4 Track 5
Note:
Title, chapter, or track numbers may not be recorded on some discs.
E-5
I I
I CDG
I I I I
I CDV
I I I I
I Photo CD
I I I I
I CD-ROM
I I I I
I SACD
I I II
Discs recorded in special formats, etc.
I
II
H Icons used on DVD discs
Check the icons on the DVD case before playing your discs.
Display
Region number (playable area number)
3 52
Format recorded on the DVD
Recorded in 4:3.
You can enjoy wide images on a wide-screen TV, and letterbox size images on the 4:3 size TV.
You can enjoy wide images on a wide-screen TV and 4:3 images with the side edges cut on the 4:3 size TV.
Type of subtitles recorded Recorded subtitle languages.
2
Language can be selected with the SUBTITLE button.
Number of camera angles
2
Number of audio tracks and audio recording systems
Example: 1: English 2: French
Example: 1: Original <English> (DTS 5.1 Surround) 2: English (Dolby Digital 5.1 Surround)
Description
DVD discs are programmed with region numbers indicating countries in which they can be played. This system can play discs with region number on the back of the unit.
To adopt the video format to the connected TVs (“wide-screen TV” or
“4:3 size TV”).
Number of angles recorded on the DVD. Angles can be selected with the ANGLE button.
The number of audio tracks and au­dio recording systems are indicated.
II
I The audio recorded on the DVD
II
can be switched by using the AUDIO button.
II
I The number of audio tracks and
II
recording systems vary depend­ing on the DVD. Check them in the DVD’s manual.
General Information
DV-SL700 01-16 2/27/06, 2:29 PM5
Controls and indicators
H Main unit (front panel)
DV-SL1000W
ENGLISH
12345678
H Main unit (rear panel)
123
456
1) Disc Tray
2) STANDBY Indicator
3) PLAY/PAUSE Indicator
4) Remote Sensor
5) Disc Tray OPEN/CLOSE Button
6) Play or Pause Button
7) STOP Button
8) ON/STANDBY
1) AC Cord Lead
2) Component Video Output Sockets
3) Video Output Socket
4) Digital Output Socket (Coaxial)
5) Audio Output Sockets
6) S-Video Output Socket
General Information
DV-SL700 01-16 2/9/06, 2:26 PM6
E-6
DV-SL1000W
ENGLISH
Controls and indicators (continued)
2 3
4 5 6
7
8 9
General Information
1
!
" # $
% &
( ) ~ +
,
-
H Remote control
Reference page
1. Remote Control Transmitter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
2. MENU/PBC Button. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35, 42
3. Disc Tray Open/ Close Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
4. Title Select Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
5. Fast Backward/Chapter (track) skip down . . . . . . . . . . . . . . . . . . . . . . .30
6. Fast Forward/Chapter (track) skip up . . . . . . . . . . . . . . . . . . . . . . . . . . .30
7. Direct Number Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
8. PROGRAM/ANGLE Button .. . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . 33, 40
9. MUTE Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
10. ON/STANDBY Button. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
11. SETUP/GO TO Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20, 30, 31
12. SLOW Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
13. STOP Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
14. ENTER/ PLAY/ PAUSE Button . . . . . . . . . . . . . . . . . . . . . . . 20, 28, 32, 37
15. Cursor Up and Down Buttons . . . . . . . . . . . . . . . . . . . . . . . 20, 33, 35, 41
16. Subtitle Select Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
17. Audio Select Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
18. Repeat A-B Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
19. Repeat Play Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34, 42
20. ZOOM Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33, 43
21. DISPLAY Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
E-7
DV-SL700 01-16 2/9/06, 2:26 PM7
Connecting to a conventional TV
Connect the DVD player to your TV.
DVD player
DV-SL1000W
ENGLISH
(White) L
To AUDIO OUT sockets
(Red) R
To VIDEO OUT socket (Yellow)
To audio
To video input socket (Yellow)
R-AUDIO-L VIDEO
AUDIO VIDEO INPUT
1
input sockets
Audio/Video cable (supplied)
(Red) R
(White) L
Notes:
I Please refer to your TV instruction manual. I When you connect the DVD player to your TV, be sure to turn off the power
and disconnect both units from the wall socket until all the connections have been made.
I If your TV has one audio input socket, connect the AUDIO OUT sockets of
the DVD player to a Y-cable adaptor (not supplied), then connect it to the TV Audio input. Please consult your local audio/video dealer.
I Do not connect the DVD player to a VCR directly. The playback picture will
be distorted because DVD discs are copy protected.
TV with Audio/Video input sockets
System Connections
E-8
DV-SL700 01-16 2/9/06, 2:26 PM8
DV-SL1000W
ENGLISH
Connecting to a conventional TV (continued)
Using the S-VIDEO OUT sockets Notes:
Please follow the steps before turn on the power.
1. If your TV has the S-video input socket, connect the DVD player with the S-video cable (not supplied). (The VIDEO OUT socket connection is not necessary.) You can enjoy clearer picture playback.
2. You also need to connect the left and right audio cables to the AUDIO OUT sockets of DVD player and the Audio input sockets of the TV.
Using the COMPONENT VIDEO OUT sockets Notes:
Please follow the steps before turn on the power.
1. If your TV has the component video input sockets, connect the DVD player
2. You also need to connect the left and right audio cables to the AUDIO OUT
to these sockets. (The VIDEO OUT or S-VIDEO OUT socket connection is not necessary.) You can enjoy high quality picture playback.
sockets of DVD player and the Audio input sockets of the TV.
DVD player
System Connections
*Please consult your local audio/video dealer.
E-9
DV-SL700 01-16 2/9/06, 2:26 PM9
To S-VIDEO OUT socket
TV
S-VIDEO IN 1
To S-video input socket
*S-video cable (not supplied)
DVD player
COMPONENT VIDEO INPUT
Blue
Green
*Component video cable (not supplied)
Red
Green
TV
Y
PBP
R
Blue
Red
Connecting to a conventional TV (continued)
Using RF Modulator
If your TV does not have a Video input socket and has an aerial terminal only, please purchase the *RF Modulator (not supplied). (*Please consult your audio/video dealer.)
Example: DVD player, TV and RF Modulator connections
DV-SL1000W
ENGLISH
Audio/Video cable (supplied)
To AUDIO OUT sockets
DVD player TV
(Red) R
(White) L
3
To VIDEO
OUT socket
(Yellow)
To video input
RF Modulator
socket (Yellow)
To audio input sockets
(Red) R
A/V INPUT
R-AUDIO-LVIDEO
(White) L
TO TV
4
CHANNEL
34
ANT. IN
VHF/UHF
ANTENNA
IN
2
1. Connect the aerial cable (not supplied) to the ANT. IN terminal of the RF Modulator.
2. Connect the 75-ohm coaxial cable (not supplied) between the TO TV terminal of the RF Modulator and the VHF/UHF ANTENNA IN terminal of the TV.
3. Connect the Audio/Video cable (supplied) between the AUDIO OUT and VIDEO OUT sockets of the DVD player and the AUDIO INPUT and VIDEO INPUT sockets of the RF Modulator.
4. Turn on the TV, and set the channel number (CHANNEL 3 or CHANNEL
4) on both TV and RF Modulator, whichever is not used for regular broadcast in your area.
Note:
For more details, please refer to the instruction manual of the RF Modulator.
1
System Connections
E-10
DV-SL700 01-16 2/9/06, 2:26 PM10
DV-SL1000W
ENGLISH
Connecting to a conventional TV (continued)
Example: DVD player, VCR, TV and RF Modulator connections
Audio/Video cable (supplied)
To AUDIO OUT sockets
DVD player
(Red) R
(White) L
4
To VIDEO
OUT socket
(Yellow)
RF Modulator
TV
System Connections
1. Connect the aerial cable (not supplied) to the VHF/UHF FROM ANTENNA IN terminal of the VCR.
2. Connect the 75-ohm coaxial cable (not supplied) between the TO TV OUT terminal of the VCR and the ANT. IN terminal of the RF Modulator.
3. Connect the 75-ohm coaxial cable (not supplied) between the TO TV terminal of the RF Modulator and the VHF/UHF ANTENNA IN terminal of the TV.
To video input
socket (Yellow)
To audio input sockets
1
(Red) R
VHF/UHF
ANTENNA
IN
A/V INPUT
R-AUDIO-LVIDEO
(White) L
CHANNEL
34
5
2
ANT. INTO TV
5
34
CHANNEL
VHF/UHF
FROM ANT.
TO TV
IN
OUT
3
VCR
4. Connect the Audio/Video cable (supplied) between the AUDIO OUT and VIDEO OUT sockets of the DVD player and the AUDIO INPUT and VIDEO INPUT sockets of the RF Modulator.
5. Turn on the TV, and set the channel number (CHANNEL 3 or CHANNEL 4) on all TV, VCR and RF Modulator, whichever is not used for regular broad­casts in your area.
Note:
For more details, please refer to the instruction manual of the RF Modulator.
E-11
DV-SL700 01-16 2/9/06, 2:26 PM11
Connecting to a TV with Progressive-scan Capability
Your TV must be capable of handling progressive scanning and have component video input capability.
DV-SL1000W
ENGLISH
To COMPONENT VIDEO OUT sockets
Green
Red
DVD player
(Red) R
(White) L
R
LYPBP
AUDIO INPUT COMPONENT VIDEO INPUT
*Audio cable (supplied)
(Red) R
1. Connect the DVD player to the component video input sockets of the TV. (The VIDEO OUT or S-VIDEO OUT sockets connection is not encourage.)
2. You also need to connect the left and right audio cables to the AUDIO OUT sockets of DVD player and the Audio input sockets of the TV.
3. Set the DVD player to the PROGRESSIVE position. (See page 21)
To audio input sockets
(White) L
*Component video cable (not supplied)
Blue
To COMPONENT VIDEO INPUT sockets
Green
Blue
Red
R
TV with progressive-scan capability
*Please consult your local audio/video dealer.
System Connections
DV-SL700 01-16 2/9/06, 2:26 PM12
E-12
DV-SL1000W
ENGLISH
Connecting to a TV with Progressive-scan Capability (continued)
Interlaced scanning
+
Progressive scanning
Progressive Scanning
Whilst interlaced scanning produces one frame of video in two fields, progressive scanning creates one frame in one field. Conventional interlaced scanning constitutes one second with 30 frames (60 fields), but progressive scanning constitutes it with 60 frames from scratch. Progressive scanning can reproduce sharper picture with high resolution for still image or other picture containing long texts or horizontal lines. This model has compliance with 525p (progressive) system.
Notes:
I Please refer to your TV instruction manual. I When you connect the DVD player to your TV, be sure to turn off the power and disconnect both units from the wall socket until all the connections have been
made.
I Do not connect the DVD player to a VCR directly. The playback picture will be distorted because DVD video discs are copy protected.
Notes:
System Connections
I For VIDEO connection, please refer to “BASIC CONNECTIONS”. I Please refer to the instruction manual of your amplifier. I When you connect the DVD player to your amplifier, be sure to turn off the power and disconnect both units from the wall socket until all the connections
have been made.
\
E-13
DV-SL700 01-16 2/9/06, 2:26 PM13
Additional connections
H Connecting to an Audio System and TV
Connect the DVD player to an Audio System and a TV.
DV-SL1000W
ENGLISH
DVD player
To AUDIO OUT sockets
Notes:
I Please refer to the instruction manual of your Audio System and
TV.
I When you connect the DVD player to other equipment, be sure to
turn off the power and disconnect all of the equipment from the wall socket until all the connections have been made.
I Do not connect the DVD player to a VCR directly. The playback
picture will be distorted because DVD discs are copy protected.
DV-SL700 01-16 2/9/06, 2:26 PM14
(Red) R
*Audio cable (supplied)
To VIDEO OUT socket (Yellow)
(White) L
*Video cable (supplied)
(White) L
(Red) R
To video input (Yellow)
R-AUDIO-L VIDEO
AUDIO VIDEO INPUT
1
To audio input sockets
L
AUDIO INPUT
R
* Please consult your local audio/video dealer.
TV with Audio/Video input sockets
Audio System
System Connections
E-14
DV-SL1000W
ENGLISH
Additional connections (continued)
H Connecting to an Amplifier with Dolby Digital Decoder or DTS Decoder
To digital audio input
*Coaxial audio cable (not supplied)
To COAXIAL DIGITAL OUT socket
To enjoy Dolby Digital or DTS
Select “RAW” in “AUDIO OUT” on the “AUDIO SETUP”. (See page 23)
System Connections
Amplifier with Dolby Digital Decoder, DTS Decoder or MPEG 2 Decoder
Centre speaker
Front left speaker
Surround left speaker
* Please consult your local audio/video dealer.
Front right speaker
Surround right speaker
Subwoofer
E-15
DV-SL700 01-16 2/9/06, 2:26 PM15
Additional Connection (continued)
H Connecting to a Digital Amplifier
You can enjoy 2 Channel Digital Stereo Sound.
To digital audio input
*Coaxial audio cable (not supplied)
DV-SL1000W
ENGLISH
Amplifier with a coaxial digital input
To COAXIAL DIGITAL OUT socket
To enjoy 2 Channel Digital Stereo sound
Select “PCM” in “AUDIO OUT” on the “AUDIO SETUP”. (See page 23)
DV-SL700 01-16 2/9/06, 2:26 PM16
Front left Speaker
Front right Speaker
* Please consult your local audio/video dealer.
System Connections
E-16
DV-SL1000W
ENGLISH
Additional connections (continued)
H Connecting to an Amplifier with Dolby Pro Logic Decoder
*Audio cable (supplied)
To AUDIO OUT sockets
System Connections
Note:
Please refer to your amplifier instruction manual.
To AUDIO INPUT sockets
Surround left speaker
Amplifier with Dolby Pro Logic Decoder
Centre speaker
Front left speaker
* Please consult your local audio/video dealer.
Front right speaker
Surround right speaker
Subwoofer
E-17
DV-SL700 17-24 2/9/06, 2:28 PM17
Additional Connection (continued)
HH
H
Connecting the AC power lead
HH
After checking all the connections have been made correctly, plug the AC power lead of this unit into the wall socket.
Wall socket (AC 110-240V, 50/60 Hz)
1
2
DV-SL1000W
ENGLISH
System Connections
Note:
Unplug the AC power lead from the wall socket if the unit will not be used for a prolonged period of time.
AC Plug Adaptor
In areas (or countries) where a wall socket as shown in illustration 2 is used, connect the unit using the AC plug adaptor supplied with the unit, as illustrated. The AC plug adaptor is not included in areas where the wall socket and AC power plug can be directly connected (see illustration 1).
DV-SL700 17-24 2/9/06, 2:28 PM18
E-18
DV-SL1000W
ENGLISH
Battery installation Turning the power on
1 Open the battery cover. 2 Insert the supplied batteries according to the direction indicated in
the battery compartment.
When inserting or removing the batteries, push them towards the · battery terminals.
3 Close the cover.
Precautions for battery usage:
I Replace all old batteries with new ones at the same time. I Do not mix old and new batteries. I Remove the batteries if the unit is not to be used for long periods of time.
This will prevent potential damage due to battery leakage.
Caution:
I Do not use rechargeable batteries (nickel-cadmium battery, etc.).
Preparation for Use
I Incorrect installation may cause the unit to malfunction.
Notes concerning usage:
I Replace the batteries if the operating distance is reduced or if the operation
becomes erratic. Purchase 2 “AAA” size batteries (UM-4, R03, HP-16 or similar).
I Periodically clean the transmitter on the remote control and the sensor on
the unit with a soft cloth.
I Exposing the sensor on the unit to strong light may interfere with operation.
Change the lighting or the direction of the unit.
I Keep the remote control away from moisture, heat, shock, and vibrations.
H Test of the remote control
Check the remote control operation after making all the connections. Point the remote control directly at the remote sensor on the unit.
The remote control can be used within the range shown below:
Press the power button. Does the power turn on? Now, you can enjoy your system.
0.2 m - 6 m (8" - 20')
H To turn the power on
Press the power button:
If the power does not turn on, check the AC power lead is plugged in properly.
Preparation for Use
E-19
DV-SL700 17-24 2/9/06, 2:28 PM19
Changing the system setup
Turn on the TV, and switch the input to the “VIDEO 1”, “VIDEO 2”, etc. accordingly.
1 Press the ON/STANDBY
button on DVD PLAYER to
NO DISC
turn the power on.
I The SHARP startup screen appears. I If the startup screen is blurred, press
the SETUP button on the remote control to change the TV system.
2 Press the SETUP button. 3 Press the or 5 button to
select a Setup menu.
See the list on pages 21 - 24 for setup menu.
4 Press the 4,5 , 2 or 3 button
to change the setting and press the ENTER button after confirm.
I See the list on pages 21 - 24 for the
selectable parameters.
I Press the ENTER button to complete
setting.
5 Press SETUP button to complete the setting.
I You can complete the setting by select “EXIT SETUP” or press again
SETUP button.
I To change other settings, begin from step 2.
DVD
Notes:
I Settings are stored even if the unit is switch off but it does not include for pass-
word and parental settings.
I The backup function protects the stored settings for a few hours should there be
a power failure or the AC power lead disconnection.
I System setup cannot be perform during playback condition.
DV-SL1000W
ENGLISH
Preparation for Use
DV-SL700 17-24 2/9/06, 2:28 PM20
E-20
DV-SL1000W
ENGLISH
Changing the system setup (continued)
HH
Change the system with conventional TV connecting
H
HH
I If you use a conventional TV, you must select the INTERLACE (I) mode. I INTERLACE mode is use for a normal video output. I For conventional TV connection, please refer to page 11.
HH
H
Change the system to a TV with Progressive-Scan
HH
I If you use TV with Progressive-Scan capability and connect it to the COMPONENT VIDEO OUT sockets of the DVD Video Player (see page 12), you must
select the PROGRESSIVE-SCAN (P-SCAN) mode. (page 24)
Setup menu Selectable parameters (* indicates default settings.) Description
SYSTEM SETUP
Preparation for Use
(*1) Selects the dynamic range compression to fit the individual listening situation of the audience. This function can be used in DVD playback. Depending on the disc, sounds may become too loud or inaudible during playback. Dolby Digital’s dynamic range control allows you to adjust the sound range
Caution:
Make sure the unit is on the STOP condition before changing the Interlace or P-Scan (Progressive Scan) mode.
TV SYSTEM NTSC* (PHILLIPINES)
SCREEN SAVER ON*
TV TYPE 4:3PS*
PASSWORD
PARENTAL LEVEL 1
DEFAULT RESTORE
EXIT SETUP
PAL* AUTO
OFF
4:3LB 16:9
LEVEL 8*
Select the correct colour system (TV standard).
A screen saver appears.
The screen saver is disabled.
The screen mode should be set according to the connected TV type (for details, see page 25).
Change the password (for details, see page 26).
Sets a restriction level for DVD viewing (for details, see page 26). Enter a 4-digit password. It is set to 0000 by default.
This resets all setting, except for PARENTAL to the factory defaults.
The setting is completed.
.
E-21
DV-SL700 17-24 2/9/06, 2:28 PM21
Changing the system setup (continued)
Setup menu Selectable parameters (* indicates default settings.) Description
LANGUAGE SETUP
OSD LANGUAGE ENGLISH*
CHINESE THAI (THAILAND)
AUDIO LANG ENGLISH*
CHINESE JAPAN FRENCH SPANISH PORTUGUESE GERMAN
SUBTITLE LANG ENGLISH*
CHINESE JAPAN FRENCH SPANISH PORTUGUESE GERMAN OFF
MENU LANG ENGLISH*
CHINESE JAPAN FRENCH SPANISH PORTUGUESE GERMAN
EXIT SETUP
You can select the desired (On TV Screen Display) language for the setup menu or playback control screen.
Selects the language audible from the speakers.
Selects the subtitle displayed on the TV screen.
Selects the disc menu language.
The setting is completed.
DV-SL1000W
ENGLISH
Preparation for Use
DV-SL700 17-24 2/21/06, 10:53 AM22
E-22
DV-SL1000W
ENGLISH
Changing the system setup (continued)
Setup menu Selectable parameters (* indicates default settings.) Description
AUDIO SETUP
DIGITAL OUT RAW*
DYNAMIC RANGE FULL
PCM
6/8 4/8 2/8 OFF*
• Highlight the DIGITAL OUT option, and press the
1, 2, 5 or 4 buttons to choose the audio output mode you prefer. Press ENTER to confirm.
• RAW: Choose this setting if your DVD player is connected to a power amplifier with a coaxial cable; When playing a disc recorded with Dolby Digital, DTS and MPEG audio formats, the corresponding digital signals will be output from the Coaxial Output socket. This Player’s digital output sockets are designed for a connection to a Dolby Digital, DTS, or MPEG receiver or decoder.
• PCM: Choose this setting if your DVD player is connected to a 2-channel digital stereo amplifier; When playing a disc recorded with Dolby Digital and MPEG audio formats, audio signals will be modulated into 2-Channel PCM signal, and it will be output from the Coaxial Output socket.
DYNAMIC RANGE: If adjusting to FULL, the audio signal peak value will be the minimum; whilst adjusting to OFF, maximum.
Preparation for Use
VIDEO SETUP
E-23
DV-SL700 17-24 2/9/06, 2:28 PM23
EXIT SETUP
BRIGHTNESS 12
CONTRAST 12
10 8 6* 4 2 0
10 8 6* 4 2 0
The setting is completed.
To adjust TV screen brightness level.
To adjust TV screen contrast level.
Changing the system setup (continued)
Setup menu Selectable parameters (* indicates default settings.) Description
HUE +6
+4 +2 0*
-2
-4
-6
SATURATION 12
10 8 6 4 2 0*
VIDEO OUT S-VIDEO
YUV*
P-SCAN
EXIT SETUP
To adjust TV screen hue level.
To adjust TV screen saturation level.
Select “S-VIDEO” mode if connect DVD Video Player (S-Video Output Socket) to TV (S-Video Input Socket) (For details, see page 9)
Select “INTERLACE-YUV” mode if connect DVD Video Player (Video Output Socket or S-Video Output Socket) to TV (Video Input Socket or S­Video Input Socket) (For details, see page 8,9,10,11,14)
Select “P-SCAN YP Video Player (Component Video Output Socket) to TV (Component Video Input Socket with progressive-scan capability) (for detail, see page 12,13)
The setting is completed.
BPR” mode if connect DVD
DV-SL1000W
ENGLISH
Preparation for Use
* Use the 5∞ buttons to adjust the setting level and press the “ENTER” to complete it.
DV-SL700 17-24 2/9/06, 2:28 PM24
E-24
DV-SL1000W
ENGLISH
Changing the system setup (continued)
H TV type setting
Indicator Setting
4:3PS
4:3LB
When playing a wide image (16:9) disc, the left and right sides of the image are cut (pan scan) to display a natural-look­ing 4:3 size image. A wide image disc without pan scan is played back in 4:3 letterbox.
A 4:3 disc is played in 4:3.
When playing a wide image (16:9) disc, black bands are inserted at the top and bottom and you can enjoy full wide im­ages (16:9) on a 4:3 size TV.
PS
H Language setting
Indicator Setting
OSD LANGUAGE
AUDIO LANG
A language for screen display can be set for the setup menu, messages, etc.
English
DISC LOADING
A language for audio can be set. You can specify a language for conversation and narration.
English French
Chinese
DISQUE CHARGEMENT
A 4:3 disc is played in 4:3.
16:9
Preparation for Use
Note:
When playing the disc with a fixed video format, it will not change even if the TV screen size is changed.
A wide image (16:9) is displayed when playing a wide image (16:9) disc.
• When playing a 4:3 image disc, the image size depends on the setting of the connected TV.
• If you play back a wide image (16:9) disc with this unit con­nected to a 4:3 TV, the vertically shrunk image is displayed.
H TV system setting (refer page 21)
Indicator Setting
AUTO Select this mode for the multi-system TV. NTSC Select this mode for the NTSC TV. PAL Select this mode for the PAL TV.
E-25
DV-SL700 25-39 2/9/06, 2:37 PM25
SUBTITLE LANG
MENU LANG
Thank you
A language for subtitle can be set. The subtitles are displayed in a specified language.
English
Thank you
A language for disc menus can be set. Menu screens are displayed in a specified language.
English
CAST
STAFF
French
Merci
French
ACTEURS
PERSONNEL
Merci
Changing the system setup (continued)
H Parental setting
1 Select “SYSTEM SETUP” on the Setup menu screen (see steps 1 - 4
on page 20).
2 Before setting “PARENTAL”, ensure password is unlock “ ”. The
“PARENTAL” level can’t be setting if the password is lock “ ”.
3 After selecting “PARENTAL” in steps 1 - 4 on page 20, select the
parental level and press the “ENTER” button to confirm.
4 After enter parental level, select “PASSWORD” to lock the password
key.
5 Enter a 4-digit password using the DIRECT NUMBER buttons and press
the ENTER button.
* If this is the first time, enter “0000” as factory default password.
Indicator Setting
Level 1 Adult viewing.
Level 2 NO ONE 17 AND UNDER ADMITTED.
Level 3 RESTRICTED Under 17 requires accompanying parent or adult
guardian.
Level 4 Reserve.
Level 5 PARENTS STRONGLY CAUTIONED Some material may be
inappropriate for children under 13.
Level 6 PARENTAL GUIDANCE SUGGESTED Some material may not
be suitable for children.
Level 7 Reserve.
Level 8 GENERAL AUDIENCES All ages admitted.
* Level 1 : for most restrictive viewing ==> Level 8 : for general audiences viewing. The smaller the number, the greater the level of restriction.
Note:
Whilst playing a disc with parental lock, the display may appear requesting a password in order to watch some restricted scenes. In such case, enter the password to temporarily change the parental level.
H Password setting
From the setup menu, select “SYSTEM SETUP”, “PASSWORD” and choose “_ _ _ _ ”.
1 For the first time setting the password, enter the factory default
password by pressing “0000”.
2 Enter own new password (maximum 4 digit) using the DIRECT NUM-
BER buttons.
3 Enter again same own new password buttons.
Press ENTER button to return. The “ ” will be unlock as show in picture (b).
4 Exit setup. The “ ” will be lock after exit setup menu.
Note:
When you forget your password, cancel the current password by pressing “0000” using the DIRECT NUMBER buttons (0 - 9).
DV-SL1000W
ENGLISH
Picture (a) Picture (b)
Preparation for Use
DV-SL700 25-39 2/9/06, 2:37 PM26
E-26
DV-SL1000W
ENGLISH
General control
H Muting
The volume is muted when pressing the MUTE button on the remote control. Press again to restore the volume.
* TV screen display “MUTE” when press “MUTE” button.
Preparation for Use
E-27
DV-SL700 25-39 2/9/06, 2:37 PM27
Preparation for use
DVD playback
Turn on the TV, and switch the input to the “VIDEO 1”, “VIDEO 2”, etc. accordingly.
H Playback
1 Press the ON/STANDBY button to turn the power on. 2 “SHARP” startup screen appears on the TV screen.
3 Press the 0 OPEN/CLOSE button to open the disc tray. 4 Place the disc on the disc tray, label side up.
Label side
Disc tra
y
Be sure to place 8 cm (3") discs in the middle of the disc position.
5 Press the 0 OPEN/CLOSE button to close the disc tray.
Discs supporting auto start will start to play once you close the disc tray even if you do not press the ENTER (38) button.
DV-SL1000W
ENGLISH
DVD Operation
DV-SL700 25-39 2/9/06, 2:37 PM28
6 If playback does not start in step 5, press the ENTER (38)
button.
E-28
DV-SL1000W
DVD playback (continued)
ENGLISH
To interrupt playback
Press the ENTER (38) button. To resume playback from the same point, press the ENTER (38) button.
To stop playback DVD/Audio CD/JPEG/VCD:
Press the STOP (7) button twice.
When the unit is left unoperated for more than 5 minutes after pressing the STOP (7) button, a screen saver appears (see page 21 when the screen saver setting is “ON”). Press any button on the main unit or remote control. The startup screen returns. When the unit is left unoperated for more than 20 minutes after pressing the STOP (7) button, the unit will automatically change to power standby mode. Press ON/STANDBY button to on the power.
Caution:
I Close the disc tray when not in use. Otherwise, dust may accumulate inside
and cause malfunction.
I The unit gets slightly warm when used for a long time. It does not mean the
unit is damaged.
I When attempting to play disc with scratches or of a different region number,
or unplayable or restricted (*1) discs, an error message will appear on the TV display and the disc will not play.
DVD Operation
(*1) Viewing is prohibited on some DVDs according to the audience age.
Notes:
I During disc initialisation, the volume cannot be adjusted. I Stop positions may be recorded on some discs. When you play such a disc,
playback stops there.
I During an operation, “INVALID KEY” may appear indicating that the opera-
tion is disabled by the disc.
I The main unit detects loaded discs automatically and then the indicators
light up.
E-29
H To resume playback after stopping
(resume play)
You can resume playback from the point playback is stopped.
1 Whilst a disc is playing, press the
PRE-STOP
STOP (7) button.
The system stores the point you stopped.
2 To restart play, press the ENTER button.
Play resumes from the point you stopped.
To cancel the resume playback:
Press the STOP (7) button twice.
Notes:
I The resume playback feature is disabled on some discs. I Depending on the disc, playback may resume from slightly before the
stopped position.
H DVD mode operation indicators
The following are examples of operation indicators that appear during DVD playback.
Operation TV screen Unit indicator
When power is standby
When the power is on without a disc
Disc data is being read
Stop
Stop (twice)
Play
Pause
NO DISPLAY
NO DISC
NO DISC
READ
PRE STOP
STOP
SEQ PLAY
PAUSE
ON/STANDBY
PLAY/PAUSE
PLAY/PAUSE
RED LED ON
GREEN LED ON
GREEN LED ON
DV-SL700 25-39 2/9/06, 2:37 PM29
Basic operation
H Fast forward/Fast backward (search)
You can search the desired point as you play the disc.
1 Whilst a disc is playing, press the 1 or ¡ button and
hold.
Example: When the ¡ button is pressed On DVD/SVCD/VCD/Audio CD, the speed changes as follows:
Forward X 2
PLAY (Normal play)
Forward X 2 Forward X 4 Forward X 8 Forward X 20
DV-SL1000W
ENGLISH
H To locate the beginning of a chapter (track)
(skip)
You can move to other tracks with simple operations. When playing SVCD or VCD, cancel the P.B.C. (playback control) (see page
39).
Whilst a disc is playing, press the 4 or ¢ button.
I Use the ¢ button to skip to the next chapter (track). I Use the 4 button to skip to the previous chapter (track).
Notes:
I Some discs do not display the chapter (track) and the skip feature is
disabled.
I On a DVD, skip does not operate between titles.
DV-SL700 25-39 2/9/06, 2:37 PM30
PLAY (Normal play)
The disc is forwarded by the ¡ button and backward by the 1 button.
Backward X 2
Backward X 4 Backward X 8 Backward X 20
2 Press the 38 button to return to the normal playback.
Notes:
I On some discs, the search function is disabled. I On a DVD, search does not operate between titles. I On SVCD, VCD and audio CD, the search does not operate between tracks. I Whilst searching on a DVD, the sound is not heard and the subtitles do not
appear.
I Whilst searching on an SVCD or a VCD, the sound is not heard. I Audio CD disc sounds will break up during search. This is not a malfunction. I When search is performed during the DVD playback, pictures may not be
forwarded or reversed in the search speed specified in this manual, depending on the disc or the scene being played.
I The search does not operate on JPEG discs.
DVD Operation
E-30
DV-SL1000W
ENGLISH
Basic operation (continued)
H To start playback from the desired point
(direct play)
To select and play the desired title and chapter:
1 Whilst in playback mode, press the SETUP/GO TO button.
2 Select the title or chapter by pressing the 2 or 3 but-
ton and enter the title or chapter number using the DIRECT NUMBER buttons.
Example: To select chapter 1: Press “1”. To select chapter 12: Press “1” and “2”. To select chapter 22: Press “2” and “2”.
3 Within 10 seconds, press the ENTER button after confirm.
Notes:
DVD Operation
I Direct play feature is disabled on some discs. I Some discs may not display the chapter number. I With DVDs, you can specify the desired point only in the current title and
not in another title.
TV screen
DVD
TT 00/02 CH 000/025
To play by specifying time (time search):
You can play back from the desired point by specifying the time.
1 Whilst in playback mode, press the SETUP/GO TO button.
TITLE 02/12 TIME __:__:__
If the “_ _:_ _:_ _” is not highlighted, press the 2 or 3 button repeatedly.
2 Specify the time with the DIRECT NUMBER buttons,
and then press the ENTER button.
TITLE 02/12 TIME 01: 23 : 40
I To specify 1 hour 23 minutes and 40 seconds, enter “01:23:40”. I If you enter the wrong number, press cursor 2 or 3 to the desired
change time.
Notes:
I Some discs cannot play from the specified point. I Time search feature is disabled on some discs.
DVD Operation
E-31
DV-SL700 25-39 2/9/06, 2:37 PM31
Useful operation
H
Still picture
You can freeze the image during playback.
1
Whilst a disc is playing, press the 38 (Play/Pause) ENTER button.
2 The image or picture will be freeze on TV screen.
PAUSE
Note: The sound is muted during still picture.
” appears briefly on the TV screen.
DV-SL1000W
ENGLISH
DV-SL700 25-39 2/9/06, 2:37 PM32
H Slow-motion play
You can slow down the playback speed.
1 Whilst a disc is playing, press the SLOW button
repeatedly to select the desired speed.
On DVD, the speed changes as follows:
SF X 1/2
Slow Forward play
PLAY (Normal play)
SF X 1/2
SF X 1/7
SF X 1/3 SF X 1/4
SF X 1/6
Slow Backward play
SF X 1/5
2 Press the 38 button to return to the normal playback.
Note: On some discs, the slow-motion play functions are disabled.
DVD Operation
E-32
DV-SL1000W
ENGLISH
Useful operation (continued)
DVD Operation
H To change the angle
You can change the angle of view when playing a DVD disc that contains scenes recorded from multiple angles.
When “ ” is displayed in the upper left corner of the
2
TV screen, press the ANGLE button repeatedly to select the desired angle number.
Notes:
I The angle number is not displayed if angles are not recorded on the disc. I Refer to the manual of the disc as the operation may vary depending on
the disc.
H To zoom images (zoom)
You can magnify images zoom in and zoom out during playback.
1 Whilst a disc is playing, press the ZOOM button.
Each press of the ZOOM button cycles through the zoom setting as follows:
ZOOM
OFF
ZOOM 2
ZOOM 1/4
(ZOOM IN)
ZOOM 3
ZOOM 1/3
(ZOOM OUT)
ZOOM 4
ZOOM 1/2
2 To shift the view and display the
desired part of a zoomed image, press the 5, ∞, 2 or 3 button repeatedly.
E-33
DV-SL700 25-39 2/9/06, 2:37 PM33
To return to normal view:
Press the ZOOM button repeatedly to select “ZOOM OFF”.
Notes:
I Images may become distorted when zoomed. I Subtitles cannot be zoomed.
H To play repeatedly (repeat play)
You can play a chapter (track) or a title repeatedly by specifying it during playback. When playing SVCD or VCD, cancel the P.B.C. (playback control) (see page 37).
1
Whilst a disc is playing, press the REPEAT button to Repeat 1.
TV screen
REP: [ REP 1 ]
c
Each time the button is pressed, the repeat play mode changes in the following order. The repeat play mode changes as follows on DVD:
REP: [ CHAPTER ]
REP: [ TITLE ]
REP: [ OFF ]
Repeat the currently
playing chapter.
Repeat the currently
“ALL ”
playing title.
“no display”
The normal playback.
The repeat play mode changes as follows on SVCD/VCD/audio CD:
Repeat the currently
REP: [ REP 1 ]
REP: [ REP ALL ]
REP: [ OFF ]
playing track.
Repeat the currently
“ALL ”
playing disc.
no display
The normal playback.
JPEG is displayed when JPEG menu screen is off (see page 41).
CHPTITLE
CDMP3OV
PROG
A-B
SLEEPPRESETTRK
KHz MHz
DV-SL1000W
ENGLISH
DVD Operation
DV-SL700 25-39 2/9/06, 2:37 PM34
2
To return to the normal playback, press the REPEAT
button repeatedly to select “REPEAT OFF”.
Caution:
After performing repeat play, be sure to press the 7 button. Otherwise, the disc will play continuously.
Note:
On some discs, the repeat play function is disabled.
E-34
DV-SL1000W
ENGLISH
Useful operation (continued)
H To play the contents between the specified
points repeatedly (A-B repeat)
You can play the desired portion repeatedly by specifying it during playback.
1 Whilst a disc is playing, press the A-B button.
This registers the start point (A).
2 Press the A-B button again to enter the end point (B).
This starts A-B repeat from the start point (A) to the end point (B).
3 Press the A-B button to return to the normal playback.
DVD Operation
Notes:
I A-B repeat play is disabled on some discs. I A-B repeat play for DVD is possible only within a title. I A-B repeat play for SVCD/VCD is possible only within a track. I Some scenes on DVD may not allow A-B repeat play.
TV screen
REPEAT A-
TV screen
REPEAT A-B
H To select a title from the top menu of the
disc
On a DVD with multiple titles, you can select a title from the top menu.
1 Whilst in the stop or playback
mode, press the TITLE button to display the title menu.
Example
21 Drama Action
43 SF Comedy
2 Use the 5, 4, 2 or 3 button to select a title, and
then press the ENTER button.
I The selected title plays. I Or use the DIRECT NUMBER buttons for some discs.
Note:
The procedure shown here provides only general steps. The actual procedure for using the title menu depends on the disc. See the disc jacket for details.
H To select a subtitle or audio language from
the disc menu
You can select the desired subtitle or audio language and sound system [Dolby Digital (5.1ch) or DTS sound] on your DVD if it has a disc menu.
1 Whilst in the stop or playback
mode, press the MENU/PBC button to display the disc menu.
Example
1.Highlights
2.Start Movie
2 Press the 5, 4, 2 or 3 button to change the setting
and press the ENTER button.
Or use the direct number buttons for some discs.
Note:
The procedure shown here provides only general steps. The actual procedure for using the disc menu depends on the disc. See the disc jacket for details.
E-35
DV-SL700 25-39 2/9/06, 2:37 PM35
Various settings
The subtitle language and audio language you select during playback are reset each time you set this unit to the stand-by mode or switch the input. To keep your own settings, set them in the setup menu (see page 20).
H To change the subtitle language
You can change the subtitle language or hide subtitles during playback.
Whilst a disc is playing, press the SUBTITLE button repeatedly to se-
: [1 ENGLISH]
lect the desired subtitle language.
Notes:
I On some discs, the subtitle language cannot be changed. I If no subtitles are recorded on the disc, “OFF” is displayed. I It may take time to switch the subtitle language to the selected one. I Subtitles cannot be hidden on some DVDs.
H To change the audio language
(audio output)
During playback, you can change the audio language (audio output).
Whilst a disc is playing, press the AUDIO button repeatedly to select
: [ 1 ENGLISH p 5.1 CH ]
the desired audio number.
You can select recorded languages.
ENGLISH SPANISHFRENCH
Notes:
I On some discs, the audio language cannot be changed. I For the audio language and audio system, refer to the manual of the disc.
...
DV-SL1000W
ENGLISH
DVD Operation
DV-SL700 25-39 2/9/06, 2:37 PM36
E-36
DV-SL1000W
ENGLISH
Video CD and Super Video CD Operation
The following playback functions are the same as DVD or CD operations.
Page
To locate the beginning of a chapter (track) (skip) . . . . . . . . . . . . . . . . . . . 30
Fast forward/Fast backward (search) . . . .. . . . . . . . . . . . . . . . . . . . . . . . 30
Still picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Slow-motion play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
To zoom images (zoom) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
To play repeatedly (repeat play) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
To play the contents between the specified points repeatedly
(A-B repeat) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
To change the subtitle language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
To change the audio language (audio output) . . . . . . . . . . . . . . . . . . . . . . . 36
To change the audio channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
To change the display on TV screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
To play in the desired order (programmed play) . . . . . . . . . . . . . . . . . . . . 40
H Playback of a video CD (super video CD)
with P.B.C. ON
1
Press the MENU/ PBC button with PBC ON
The menu will appear on the TV and playback will be paused.
2
Select the desired menu number using the DIRECT
NUMBER buttons.
I Playback starts. I After playback stops, the menu will reappear. Select the menu
number to play.
To interrupt playback:
Press the 06 button. To resume playback from the same point, press the 06 button.
To stop playback:
Press the H button.
The P.B.C. function will not work in the following conditions.
Repeat/programmed/direct play or the skip feature is in operation.
Notes:
I During disc initialisation, the volume cannot be adjusted. I Subtitles and sounds on the super video CD can be switched (see page 36). I The menu screen cannot be scrolled on some discs.
Example
1 2
Video CD and Super Video CD Operation
E-37
DV-SL700 25-39 2/9/06, 2:37 PM37
H To change the audio channel
You can select an audio channel.
Whilst a disc is playing, press the AUDIO button repeatedly to select the desired audio channel.
The audio channel changes as follows on SVCD/VCD:
MONO RMONO L STEREO
Note:
The audio channel may not be changed on some discs.
H
To change the display on TV screen
You can display or hide the operation indicators on the TV screen.
Whilst a disc is playing, press the Display button. (The display is changed at each press.)
DVD: SVCD/VCD/Audio CD:
DVD
TT 1/28 CH 1/14
C 00:00:52
Elapsed playback time for the total chapter
1/4ENG 5.1CH 1/5 ENG OFF
Current Subtitle and Audio Language
DVD
TT 1/28 CH 1/14
C –00:04:59
Remaining playback time for the current chapter
DVD
TT 1/28 CH 1/14
T 00:01:14
Elapsed playback time for the current title
DVD
TT 1/28 CH 1/14
T –01:27:40
Remaining playback time for the current title
OFF
Current chapter numberCurrent title number
Total number of chapters
Total number of titles
p
VCD
VCDVCD
TRK 7/14
C 00:00:44
Elapsed playback time for the current track
VCD
VCDVCD
TRK 7/14
C –00:05:42
Remaining playback time for the current track
VCD
VCDVCD
TRK 7/14
T 00:23:42
Total elapsed playback time for the disc
VCD
VCD
TRK 7/14
VCD
T –00:36:24
Total remaining playback time for the disc
OFF
PBC
PBC
PBC
PBC
DV-SL1000W
ENGLISH
DV-SL700 25-39 2/9/06, 2:37 PM38
Video CD and Super Video CD Operation
E-38
DV-SL1000W
ENGLISH
Video CD and Super Video CD Operation (continued) ideo CD and Su
H To play without activating the playback
control function
You can play a video CD (super video CD) with P.B.C. without activating the playback control function. In this case, the menu screen will not appear, and the disc will play in the same way as a video CD (super video CD) without P.B.C.
Whilst in the stop or playback mode, press the MENU/PBC button to cancel the P.B.C. mode.
Note:
Video CD and Super Video CD Operation
Some video CDs (super video CDs) with P.B.C. cannot be played back when the P.B.C. mode is off.
E-39
BC OFF
PBC OFF
H To start playback from the desired point
(direct play)
To select and play the desired track:
Cancel the P.B.C. (playback control).
Whilst in the stop or playback mode, press the DIRECT NUMBER buttons to select the track number.
TV screen
VCD
VCD
TRK 03/14
VCD
Press cursor 1 or 0 to select the digit numbers are decided to change. Example: To select track 14: Press “1” at track first digit and “4” at track second
Notes:
I Direct play feature is disabled on some discs. I Some discs cannot play from the specified point.
To play by specifying time (time search):
Cancel the P.B.C. (playback control).
digit. Press ENTER after confirm.
PBC 00:03:56
1 During playback, press the SETUP/GO TO button.
VCD
VCDVCD TRK 01/01
PBC 00:00:00
00:00:30
MinutesHour Second
Time search
2 Specify the time by using 1 or 0 cursor to select
desire change time digits.
I Enter minutes and seconds. I To specify 1 hour 23 minutes and 40 seconds, use cursor 1 or 0 to select
hour “01”, minutes “23” and second “40”.
I If you enter the wrong number, press cursor 1 or 0 to direct change the
digit number.
I Press ENTER to confirm.
Notes:
I Time search feature is disabled on some discs. I Time search feature is not available on JPEG discs.
DV-SL700 25-39 2/9/06, 2:37 PM39
CD operation
The following playback functions are the same as DVD or VCD opera­tions.
Page
Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
To locate the beginning of a chapter (track) (skip) . . . . . . . . . . . . . . . . . . 30
Fast forward/Fast backward (search) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
To play repeatedly (repeat play) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
To play the contents between the specified points repeatedly
(A-B repeat) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
To change the audio channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
To change the display on TV screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
To start playback from the desired point (direct play) . . . . . . . . . . . . .. . . . 31
H
To play in the desired order (programmed play)
You can playback the desired tracks in a specific order.
CD, CD-R and CD-RW Operation
Maximum of 16 tracks can be programmed.
1 Whilst in the stop mode, press the PROGRAM button.
The PROGRAM screen show as follows on SVCD VCD CD:
PROG
TV screen
2Enter a track and chapter number with the DIRECT
NUMBER buttons.
The PROGRAM screen show as follows on SVCD VCD CD:
PROG
I Repeat the procedure above to enter other track numbers by pressing
5, ∞, 2 or 3 cursor.
I If you enter the wrong number, you can change the title/track number
by pressing DIRECT NUMBER buttons.
I If the track number is 2 digits or more, example track 12, just press “1”
and “2” by DIRECT NUMBER buttons.
0001
0010
0100
TV screen
PLAY CLEAR
3 Select “PLAY” at the PROGRAM menu and press
ENTER to start play.
To change the programmed contents:
Repeat the above procedures from step 1.
Programmed contents will be cleared when you perform the following operations:
I Press the STOP (7) or PROGRAM button in the stop or play mode twice. I Switch the input or remove the discs. I Select “CLEAR” at PROGRAM menu and press ENTER.
Notes:
I Programming is not possible whilst paused. I Sequential programming does not work if the disc disables programming or
does not have track information.
I During programmed play, repeat play can be performed by pressing the RE-
PEAT button.
I Program menu only can appear on screen at stop mode for JPEG format
when press PROGRAM button.
I Programming (program menu) cannot be access during playback mode for
JPEG format.
DV-SL1000W
ENGLISH
CD, CD-R and CD-RW Operation
PLAY CLEAR
DV-SL700 40-52 2/9/06, 2:39 PM40
E-40
DV-SL1000W
ENGLISH
JPEG disc operation
The following playback functions are the same as DVD or VCD operations.
Page
Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
To locate the beginning of a chapter (track) (skip) . . . . . . . . . . . . . . . . . . 30
Fast forward/Fast backward (search) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
To play repeatedly (repeat play) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
To change the display on TV screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
To start playback from the desired point (direct play) . . . . . . . . . . . . . . . . 39
H Playback on the JPEG menu screen
You can play CD-R/RW recorded in the JPEG formats.
1 Load a disc containing JPEG files,
the JPEG menu screen appears.
...
Indicates folders.
...
Indicates JPEG data.
.JPEG
01
001
002
003
2 Press the 5, ∞, 2 or 3 button to select a folder or a
track and press the ENTER.
I Playback starts when you select a track. I For JPEG format, “INVALID KEY” will appear if select “ENTER”. I The next file picture can automatically displayed after a whilst for JPEG
format if you select “ENTER” (38) button to start playback.
I Using the direct number buttons, you can open file or folder directly.
Notes:
I Up to 11 characters can be displayed for a folder name and a track name.
Underlines, asterisks, and spaces may not be displayed.
I Programming is not possible whilst playback mode for JPEG format. It’s
only can be done during stop mode (refer page 40 for programmed play).
CD, CD-R and CD-RW Operation
E-41
DV-SL700 40-52 2/9/06, 2:39 PM41
CD, CD-R and CD-RW Operation
Repeat play on the JPEG menu screen:
Whilst a disc is playing, press the REPEAT button.
Each time the button is pressed, the repeat play mode changes in the follow­ing order.
TV screen
REP: (REP 1)
REP: [REP DIR]
REP: [REP ALL]
REP: [OFF]
“ ”
ALL
ALL
No display
DV-SL1000W
ENGLISH
CD, CD-R and CD-RW Operation
DV-SL700 40-52 2/9/06, 2:39 PM42
CD, CD-R and CD-RW Operation
E-42
DV-SL1000W
ENGLISH
JPEG disc operation (continued)
H Zoom function
1 During playback, press the ZOOM button.
Each press of the ZOOM button cycles through the zoom setting as follows:
ZOOM
OFF
ZOOM 2
ZOOM 1/4
2 To shift the view and display the desired part of a zoomed
image, press the 5, ∞, 2 or 3 button repeatedly.
(ZOOM IN)
ZOOM 3
ZOOM 1/3
(ZOOM OUT)
ZOOM 4
ZOOM 1/2
H Rotating a picture
You can rotate images.
During playback, press the 5, ∞, 2 or 3 button.
The image rotates as shown below.
3 button : 90˚ rotation in a clockwise direction.
2 button : 90˚ rotation in an anti-clockwise direction.
Press the button.
Press the b
utton.
CD, CD-R and CD-RW Operation
To return to normal view:
Press the ZOOM button again, “ZOOM OFF” will show on the screen.
E-43
DV-SL700 40-52 2/9/06, 2:39 PM43
Press the b
Press the b
utton.
utton.
5 button : Horizontal mirror image.
CD, CD-R and CD-RW Operation
button : Vertical mirror image.
Enjoying various sounds
DTS (Digital Theater System)
Digital input from discs with this trademark
One of the digital audio systems for theatrical use. As the sound quality is emphasised, you can enjoy the realistic sound effect in the home theatre system.
The DTS indicator will light up when the disc recorded in DTS is played back.
Dolby Digital
Digital input from discs with this trademark
One of the digital audio systems for theatrical use. You can enjoy the stereophonic effect in the home theatre system.
DV-SL1000W
ENGLISH
H DTS or Dolby Digital Surround
Enjoy DTS or Dolby Digital sound in 5.1 or 2-channel.
Whilst a disc is playing, press the AUDIO button repeatedly to select the desired listening mode.
5.1ch surround TV screen sound:
DTS
Note:
The above sound was more effect if connecting to an Amplifier/Digital Amplifier with Dolby Digital Decoder, DTS Decoder. (See additional connection page 15.)
DV-SL700 40-52 2/9/06, 2:39 PM44
Advanced Features
E-44
DV-SL1000W
ENGLISH
References
Troubleshooting chart
Many potential problems can be resolved by the owner without calling a service technician. If something is wrong with this product, check the following before calling your authorised SHARP dealer or service centre.
H General
Symptom Possible cause
No sound is heard.
Noise is heard during playback.
Interference or noise occurs on the TV image.
The power is not turned on.
No images are displayed.
I Is the volume level set to “0”? I Are the speaker wires disconnected?
I Move the unit away from any computers
or mobile phones.
I Is the unit placed near TV with internal
aerial? Use an external aerial.
I Is the unit unplugged? I The protection circuit may be activated.
Unplug and plug in the power lead again after 15 minutes or more.
I Is TV turned on? I Is the input of TV switched?
H DVD player
Symptom Possible cause
Even though a disc has been loaded, “NO DISC” is displayed. Playback sounds are skipped.
The control buttons do not function. Music or video playback is interrupted.
Pictures and sound are skipped.
The unit does not operate even if the power is on.
Image cannot be played back. (Sound is not heard.)
I Is the disc loaded upside down? I Is the disc very dirty?
I Does the disc satisfy the standards? I Is the unit located near excessive
vibrations?
I Has condensation formed inside the
unit?
I Is the disc very dirty? I Does the disc satisfy the standards? I Is the unit located near excessive
vibrations?
I Has condensation formed inside the
unit?
I Is the disc very dirty? I Is the unit located near excessive
vibrations?
I Has condensation formed inside the
unit?
I Is a disc other than a DVD (region
number on the back of the unit or ALL), SVCD, VCD, audio CD, CD-R or CD-RW loaded?
I Are the video and audio cables
connected improperly?
I Is a disc other than a DVD (region
number on the back of the unit or ALL), SVCD, VCD, audio CD, CD-R or CD-RW loaded?
I Is the disc very dirty? I Is the disc loaded upside down? I Clean the optical pickup if it is dirty. I Is the TV input set to “VIDEO 1/VIDEO
2”, etc.?
I Is the unit turned on?
E-45
DV-SL700 40-52 2/9/06, 2:39 PM45
Troubleshooting chart (continued)
H Remote control
Symptom Possible cause
The remote control does not operate properly.
I Is the battery polarity respected? I Are the batteries dead? I Is the distance or angle incorrect? I Are there any obstructions in front of the
unit?
I Is the remote control sensor exposed to
strong light (inverter fluorescent light, direct sunlight, etc.)?
I Is the remote control for another
equipment used simultaneously?
H If trouble occurs
When this product is subjected to strong external interference (mechanical shock, excessive static electricity, abnormal supply voltage due to lightning, etc.) or if it is operated incorrectly, it may malfunction.
If such a problem occurs, do the following:
1 Turn the unit power off and on again. 2 If the unit is not restored in the previous operation, unplug and plug in the
unit, and then turn the power on.
H Before transporting the unit
1 Press the ON/STANDBY button to turn the power on. 2 Press the 0 OPEN/CLOSE button to open the disc tray.
Remove the disc inserted in the unit.
3 Press the 0 OPEN/CLOSE button to close the disc tray. 4 Press the ON/STANDBY button to switch off, and then unplug the AC
power lead from the wall socket.
H Condensation
Sudden temperature changes, storage or operation in an extremely humid environment may cause condensation inside the cabinet (laser pickup, etc.) or on the transmitter on the remote control. Condensation can cause the unit to malfunction. If this happens, leave the power on with no disc in the unit until normal playback is possible (about 1 hour). Wipe off any condensation on the transmitter with a soft cloth before operating the unit.
DV-SL1000W
ENGLISH
References
DV-SL700 40-52 2/9/06, 2:39 PM46
E-46
DV-SL1000W
ENGLISH
References
Error indicators and warnings Specifications
When you load an unplayable disc or fail to perform operations properly, the following messages are displayed on the unit and the TV screen.
TV screen Meaning
NO DISC
WRONG REGION
I The disc is not loaded. I The disc is scratched or dirty and cannot
be recognised.
I The disc is loaded up-side down.
I The region number of the DVD is not the
number on the back of the unit or “ALL”.
Maintenance
H Cleaning the cabinet
Periodically wipe the cabinet with a soft cloth and a diluted soap solution, then with a dry cloth.
I Do not use chemicals for cleaning (petrol, paint thinner, etc.). It may dam-
age the cabinet finish.
I Do not apply oil to the inside of the unit. It may cause malfunctions.
As part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in indi­vidual units.
H General
Power source AC 110 - 240 V, 50/60 Hz
Power consumption
Dimensions
Weight
Audio output terminals
Video output terminals
Digital output terminal
Power on: 15 W
Width: 360 mm (14-3/8") Height: 37 mm (1-1/2") Depth: 200 mm (7-7/8")
1.5 kg (3.3 lbs.)
Analogue output (OUT): RCA type x 1 pair (L/R)
S-video output: S-terminal x 1, component (Y, PB, PR) Video output: RCA type x 1
COAXIAL
H DVD player
Signal system PAL/NTSC colour
Supported disc types
Video signal
Audio signal
DVD (with the same region number on the back of the unit or ALL), SVCD, VCD, audio CD, CD-R, CD-RW, JPEG.
Horizontal resolution: 500 lines S/N ratio: 70 dB
Frequency character­istics
S/N ratio
Dynamic range
Total harmonic distortion ratio
Linear PCM DVD: 20 Hz to 20 kHz (sampling rate: 48 kHz) 20 Hz to 20 kHz (sampling rate: 96 kHz) CD: 20 Hz to 20 kHz
CD: 94 dB (1 kHz)
Linear PCM DVD: 95 dB CD: 94 dB
0.01 % maximum
E-47
DV-SL700 40-52 2/9/06, 2:39 PM47
Copyright
Copyright information:
I Unauthorised copying, broadcast, public display, transmission, public performance and rental (regardless of whether or not such
activities are for profit) of disc contents are prohibited by law.
I This system is equipped with copy protection technology that causes substantial degradation of images when the contents of a disc
are copied to a video tape.
Copy Protection
This unit supports Macrovision copy protection. On DVD discs that include a copy protection code, if the contents of the DVD disc are copied using a VCR, the copy protection code prevents the videotape copy from playing normally.
Apparatus Claims of U.S. Patent Nos. 4,631 ,603, 4,577,216, 4,819,098 and 4,907,093 licensed for limited viewing uses only.
This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners.
DV-SL1000W
ENGLISH
Use of this copyright protection technology must be authorised by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorised by Macrovision Corporation.
Reverse engineering or disassembly is prohibited.
“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
DV-SL700 40-52 2/9/06, 2:39 PM48
References
E-48
MEMO
DV-SL800W_MEMO 8/22/05, 9:15 AM1
MEMO
DV-SL800W_MEMO 8/22/05, 9:15 AM1
DV-SL700 F_B cover 2/20/06, 5:56 PM2
SHARP CORPORATION
92LY0M10034308
06E R KI 1
Loading...