Page 1
DVD Video Player
MODEL
DV-S1W
DV-S1
OPERATION MANUAL
The region number for this DVD player is 3.
3
NTSC/PAL
Please read this Operation Manual carefully
before using your DVD Video Player.
DIGITAL VIDEO
Page 2
SAFETY INFORMATION
DIGITAL VIDEO
RL CB
CRY
AUDIO OUT
S-VIDEO
VIDEO OUT
COMPONENT
OR
DV-S1W
DV-S1
CAUTION - VISIBLE LASER
RADIATION WHEN OPEN AND
INTERLOCK DEFEATED.
AVOID EXPOSURE TO BEAM.
Note:
This Player can be used only where the power supply is
AC 110V-240V, 50/60Hz. It cannot be used elsewhere.
CAUTION:
USE OF CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OF PROCEDURES OTHER
THAN THOSE SPECIFIED HEREIN MAY RESULT
IN HAZARDOUS RADIATION EXPOSURE.
AS THE LASER BEAM USED IN THIS PLAYER IS
HARMFUL TO THE EYES, DO NOT ATTEMPT TO
DISASSEMBLE THE CABINET. REFER SERVICING TO QUALIFIED PERSONNEL ONLY.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO
RAIN OR MOISTURE.
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, AND ANNOYING INTERFERENCE, USE
THE RECOMMENDED ACCESSORIES ONLY.
Laser Diode Properties
Material: GaAs
Wave length: DVD 650 nm / CD 780 nm
Emission Duration: Continuous
Laser output: Max. 0.8 mW
• This Player is classified as a CLASS 1 LASER product.
• The CLASS 1 LASER PRODUCT label is located on the
rear cover.
• This product contains a low power laser device.To ensure
continued safety do not remove any cover or attempt to
gain access to the inside of the product. Refer all servicing to qualified personnel.
Power Cord Protection
To avoid any malfunctions of the Player, and to protect
against electric shock, fire or personal injury, please observe
the following.
• Hold the plug firmly when connecting or disconnecting the
AC power cord.
• Keep the AC power cord away from heating appliances.
• Never put any heavy object on the AC power cord.
• Do not attempt to repair or reconstruct the AC power cord
in any way.
–2–
EN
Page 3
SAFETY INFORMATION
Location and Handling
• Do not place your Player in enclosed spaces or do not
cover it to prevent excessive temperatures inside the
Player.
• Do not place the Player in direct sunlight, or near heat
sources.
• Keep the Player away from strong magnetic objects.
• Do not place any object containing water or other liquids
on the Player. In the event that liquid should enter the
cabinet, unplug the Player immediately and contact the
retailer or service centre approved by SHARP immediately.
• Do not remove the Player cabinet. Touching parts inside
the cabinet could result in electric shock and/ or damage
to the Player. For service and adjustment inside the cabinet, call a qualified dealer or service centre approved by
SHARP.
Nonuse Periods
When the Player is not being used, switch the Player to the
Standby mode.
When left unused for a long period of time, the Player should
be unplugged from the household AC outlet.
No Fingers or Other Objects Inside
Do not put any foreign object on the disc tray.
Stacking
Place the unit in a horizontal position, and do not place anything heavy on it.
Condensation
Moisture may form on the pickup lens in the following conditions:
• immediately after a heater has been turned on.
• in a steamy or very humid room.
• when the Player is suddenly moved from a cold environment to a warm one.
If moisture forms inside this Player, it may not operate properly.
In this case, turn on the power and wait about one hour for
the moisture to evaporate.
Cleaning
Unplug your Player before cleaning. Use a damp cloth for
cleaning. Do not use cleaning fluids or aerosols which could
enter the Player and cause damage, fire, or electrical shock.
These substances may also deteriorate the finish of your
Player.
If there is Noise Interference on the TV While a
Broadcast is being Received
Depending on the reception condition of the TV, interference
may appear on the TV monitor while you watch a TV broadcast and the unit is left on. This is not a malfunction of the
Player or the TV. To watch a TV broadcast, turn off the
Player.
Service
Do not attempt to service this Player yourself. Please refer
any service to the nearest service centre approved by
SHARP.
Copyright
Audio-visual material may consist of copyrighted works which
must not be recorded without the authority of the owner of
the copyright. Please refer to relevant laws in your country.
Copy Protection
This Player supports Macrovision copy protection. On DVDs
that include a copy protection code, if the contents of the
DVD are copied using a VCR, the copy protection code prevents the videotape copy from playing normally.
Apparatus Claims of U.S.Patent Nos. 4,631,603,
4,577,216, 4,819,098 and 4,907,093 licensed for limited
viewing uses only.
This product incorporates copyright protection technology
that is protected by method claims of certain U.S. patents
and other intellectual property rights owned by Macrovision
Corporation and other rights owners. Use of this copyright
protection technology must be authorized by Macrovision
Corporation, and is intended for home and other limited
viewing uses only unless otherwise authorized by
Macrovision Corporation. Reverse engineering or disassembly is prohibited.
Recommended Measures for Optimum Picture
Excellence
The Player is a precision device that is constructed using
extremely accurate technology.
Soiling or friction affecting the pickup lens or disc drive can
impair the image quality. At the w
will be pla
Player should be checked (cleaning and replacement of
some parts) every 1,000 hours. Note that this period varies
depending on the environment (temperature, humidity, dust,
etc.) in which the Player is used. Contact your authorized
Sharp supplier for details.
Do not attempt to clean the pickup lens yourself.
yed back.
To obtain optimum picture quality, the
orst, neither video nor audio
–3–
EN
Page 4
PRECAUTIONS
3
SUPPLIED ACCESSORIES
• Remote control
• Two R6 (AA) batteries
• Operation Manual
• VIDEO/AUDIO cable
SYMBOLS USED IN THIS MANUAL
The following symbols appear below in some headings and
notes in this manual, with the following meanings!
DVD
:Description refers to playback of DVD video discs.
CD
:Description refers to playback of audio CDs.
MP3
:Description refers to playback of MP3 discs.
VCD
:Description refers to playback of video CDs.
PLAYABLE DISCS
This DVD player conforms to the PAL colour system. Also
you can play discs recorded with the NTSC system via a PAL
system TV set.
•Some discs include region codes as shown below.
•The number inside the symbol refers to a region of the
world, and a disc encoded in a specific region format can
only be played back on DVD player with the same region
code.
ABOUT THE PBC FUNCTION OF VIDEO CD
This unit conforms to ver.1.1 and ver.2.0 of VIDEO CD standard, with PBC function.
Ver.1.1 (without PBC function): You can enjoy playback picture as well as music CD.
Ver.2.0 (with PBC function): When using a VIDEO CD with
PBC function, “PBC” appears on the display.
What is PBC? “PBC” stands for the PlayBack Control. You
can play interactive software using a menu screens. Refer
to instructions of VIDEO CD.
For Customer Use:
Read carefully the information located at the bottom of your
DVD player and enter below the Serial No.Retain this information for future reference.
Model No. DVD player
Serial No. __________________________
–4–
EN
Page 5
TABLE OF CONTENTS
SAFETY INFORMATION ....................................2
PRECAUTIONS...................................................4
SUPPLIED ACCESSORIES.....................................4
SYMBOLS USED IN THIS MANUAL .......................4
PLAYABLE DISCS....................................................4
FUNCTIONAL OVERVIEW .................................6
FRONT PANEL .........................................................6
REAR VIEW..............................................................6
Display Message ......................................................6
REMOTE CONTROL................................................7
Loading the Batteries ...............................................7
SETTING UP YOUR DVD PLAYER ....................8
Connecting to a TV or a stereo TV that has
COMPONENT VIDEO in jacks.................................8
Connecting a TV Equipped with S-VIDEO Input or
VIDEO/AUDIO Input Jacks .......................................9
Connecting to Audio Equipment...............................9
Playing 2 channel audio ......................................9
Playing Dolby Digital (5.1 channel), DTS or
MPEG audio ......................................................11
DVD OPERATION .............................................12
Basic Playback .......................................................12
General Features....................................................12
Disc menus.............................................................12
Title Menu...............................................................12
Pause .....................................................................12
Step by Step playback ...........................................13
Resume ..................................................................13
Fast Forward / Reverse Search..............................13
Slow Motion ............................................................13
Zoom ......................................................................13
Tr ack .......................................................................13
Title/chapter............................................................14
Time Search ...........................................................14
Repeat ....................................................................14
REPEAT TITLE/CHAPTER................................14
REPEAT TRACK................................................14
REPEAT A-B......................................................14
Programme.............................................................14
Random Playback...................................................14
MP3 Playback.........................................................15
On Screen Information ...........................................15
Tr ack Selection .......................................................15
Random Playback .................................................15
Programmed...........................................................15
Audio Language .....................................................15
Stereo Sound Mode ...............................................15
Subtitle Language...................................................16
Camera Angle.........................................................16
Changing the On-Screen Display...........................16
Parental Control......................................................16
IF YOU FORGET THE PASSWORD .................16
Parental Level .........................................................17
Marker Setup Screen .............................................17
DVD SETUP ......................................................18
Audio Setting ..........................................................18
Black Level Setting.................................................18
Display Setting........................................................18
Language Setting ...................................................19
TROUBLESHOOTING ......................................20
SPECIFICATIONS .............................................21
MAINTENANCE ................................................21
–5–
EN
Page 6
DIGITAL VIDEO
RL CB
CRY
AUDIO OUT
S-VIDEO
VIDEO OUT
COMPONENT
10 11 12 13 1514
Power on
No disc inserted
Tray open
Tray closed
Loading the Disc
Power off
PLAYPLAY
STOP
STILL/STILL/PAUSEPAUSE
STANDBYSTANDBY
OPEN/CLOSE
SKIP
REV
FWD
OPERATEOPERATE
2 43
5
1
9 87 6
FUNCTIONAL OVERVIEW
FRONT PANEL
REAR VIEW
1. OPERATE
to switch the player to ON or OFF
2. Disc tray
3. OPEN/CLOSE
to open/close the disc tray
4. PLAY
to start, pause or resume disc playback
5. STOP
to stop playback
6. FWD/SKIP
goes to next chapter or track during playback; press and
hold for three seconds for a forward search
7. SKIP/REV
goes to previous chapter or track during playback; press
and hold for three seconds for a reverse search
8. STILL/PAUSE
to pause the current disk operation
9. Display, Remote Sensor, STANDBY LED
Display Message
10. MAINS (AC Power Cord)
connect to a standard AC outlet
11. DIGITAL (Digital audio out)
connect to AUDIO inputs of a digital (coaxial) audio
equipment
12. AUDIO OUT (Left/Right)
connect to AUDIO inputs of an amplifier, receiver or
stereo system
13. VIDEO OUT
connect to the Video Input of a TV.
14. COMPONENT VIDEO OUT
connect to a TV with Component video in jacks.
15. S-VIDEO Out
connect to a TV with S-Video inputs
Caution: Do not touch the inner pins of the jacks on the
rear panel. Electrostatic discharge may cause permanent
damage to the unit.
–
6–
EN
Page 7
RETURN
ZOOM
MODE
MENU
SKIPSTILL/PAUSEA-B
REPEAT
ANGLE
AUDIO
SUB TITLE
CLEAR
TITLE
STOP
PLAY
FWDREV
SETUP
ENTER
OPEN/
CLOSE
DIRECT SKIP
ON SCREEN
123
456
789
0 +10
OPERATE
C
1
2
3
4
5
6
7
8
9
10
11
14
12
13
15
18
19
17
16
21
20
22
23
24
25
FUNCTIONAL OVERVIEW
REMOTE CONTROL
Loading the Batteries
1. Open the battery compartment cover.
2. Insert two R6 (AA) batteries, with each one oriented
3. Close the cover.
NOTES
• Do not mix alkaline and manganese batteries.
• Do not mix old and new batteries.
correctly.
1. ON SCREEN
to access or remove the display screen during DVD or
Audio CD playback
2. OPERATE
switch DVD player ON or OFF
3. AUDIO
to choose audio languages or sound modes
4. SUBTITLE
subtitle language DVD selector
5. ANGLE
select DVD camera angle
6. REPEAT
repeat chapter, track, title, disc
7. A-B REPEAT
repeat a specific segment
8. CLEAR
to reset the setting
9. STILL/PAUSE
pause playback temporarily / frame-by-frame playback
hh
10.
to view DVD picture in fast reverse motion
11. PLAY
to start a DVD disc playback
12. SETUP
to access or remove the DVD setup menu
13. MODE
to set up programmed or random playback (Audio CD)
to set the black level during DVD playback
14. ZOOM
enlarge DVD video image
15. TITLE
to display title menu of a disc
16. ENTER
acknowledge menu selection
17. RETURN
to return previous or remove setup menu
18. Arrow(LKBs)
(left/right/up/down) select an item in the menu
19. MENU
to display the menu of the DVD disc
20. STOP
to stop a DVD disc playback
gg
21.
to view DVD picture in fast forward motion
22. SKIP H,G
to skip chapter/tracks
23. 0-9 numerical key pad
select numbered items in a menu
+10
use this button to enter number 10 and above
24. OPEN/CLOSE
to open/close the disc tray
25. DIRECT SKIP
to locate a desired point
–7–
EN
Page 8
SETTING UP YOUR DVD PLAYER
TV
DVD Player
DIGITAL VIDEO
RL CB
CRY
AUDIO OUT
S-VIDEO
VIDEO OUT
COMPONENT
RL YCR CB
ANALOG INPUT
VIDEO INPUT
COMPONENT
To ANALOG
AUDIOOUT jacks
To COMPONENT
VIDEO OUT jacks
To COMPONENT
VIDEO INPUT jacks
(Red) (White)
(Red)
(White)
To ANALOG
AUDIO INPUT jacks
AUDIO cable
(supplied)
COMPONENT cable
(commercially available)
DVD
Player
VCR
TV
CAUTION:
• Be sure to turn off the Player and equipment to be connected before connecting.
• Read through the operation manual for the equipment to be connected.
• Be sure that the colours of the jacks and plugs match up when using a VIDEO/AUDIO cable.
• Be sure to keep the Player connection cables separate from the TV antenna cable when you install the Player, because it
may cause electrical interference when you are watching television programs.
Connecting to a TV or a stereo TV that has component video in jacks
CAUTION:
• Do not connect the Player to a VCR. If you view the
Picture on your TV after making the connections shown
on the right, a picture noise may appear. Connect the
Player to your TV directly.
–8–
EN
Page 9
SETTING UP YOUR DVD PLAYER
TV (with external input jacks)
RL
AUDIO
INPUT
S-VIDEO
INPUT
VIDEO
INUT
V
IDEO/AUDIO cable
(supplied)
S-VIDEO cable
(commercially available)
DVD Player
DIGITAL VIDEO
RL CB
CRY
AUDIO OUT
S-VIDEO
VIDEO OUT
COMPONENT
To VIDEO/AUDIO
OUT jacks
To S -VIDEO
OUT jack
(Yellow)(Red)
(White)
(Yellow)
(Red)
(White)
To VIDEO/AUDIO
INPUT jacks
To S -VIDEO
INPUT jack
ANALOG INPUT
R
L
DVD Player
DIGITAL VIDEO
RL CB
CRY
AUDIO OUT
S-VIDEO
VIDEO OUT
COMPONENT
AUDIO cable
(supplied)
Amplifier of stereo system, etc.
To AUDIO
OUT jacks
(Red) (White)
(Red)
(White)
Jack and Plug Colours
To amplifier
audio input jacks
Audio Left: White
Audio Right: Red
Connecting a TV Equipped with S-VIDEO Input or VIDEO/AUDIO Input Jacks
When you want to achieve a better video image by connecting a TV equipped with an S-VIDEO input connector to the Player,
you should use an S-VIDEO cable (commercially available) to connect the TV to the Player.
• When the Player is connected to a TV using both a VIDEO cable and an S-VIDEO cable, only the S-VIDEO connection is
enabled (the VIDEO connection is disabled).
• You will not be able to hear all of the sound being output by the Player if you use the VIDEO/AUDIO cable (supplied) to a
monaural TV that has only one AUDIO input jack.
NOTE:
• Be sure that the colours of the jacks and plugs match up when connecting the cable.
• Connect the Player directly to the TV. If you attempt to view video on a TV connected via a VCR, the copy protection function will scramble the picture.
• If you want to listen to the audio through audio equipment, connect only the S-VIDEO or VIDEO cable to the TV.
Connecting to Audio Equipment
Connecting the Player to audio equipment provides normal stereo sound plus powerful stereo sound enhanced by Dolby
Digital (5.1 channel), DTS, and MPEG Audio.
Playing 2 channel audio
CC
Analogue Connection
–9–
EN
Page 10
SETTING UP YOUR DVD PLAYER
DIGITAL INPUT
DVD Player
DIGITAL VIDEO
RL CB
CRY
AUDIO OUT
S-VIDEO
VIDEO OUT
COMPONENT
To
DIGITAL AUDIO
(COAXIAL)
INPUT jack
To DIGITAL AUDIO
(COAXIAL) OUT jack
Coaxial digital cable
(commercially available)
Audio equipment with
coaxial digital input jack
CC
Digital Connection
You can make this connection using a coaxial digital cable.
Digital Connection to an MD to Record a CD
Some Audio CDs have a short silent section between musical tracks. When sound from discs
such as these is digitally recorded by connecting the Player directly to a digital recorder (such as an MD player),
the music may be recorded continuously and track numbers may be lost.
CC
Digital Connection to Audio Equipment or MD Player without a Dolby Digital Decoder
• Audio CD
Play the disc as you normally would, with the audio mode set to “L+R”. With a digital connection, audio of a disc recorded
with DTS sounds abnormal in this case.
• DVD
With a digital connection, audio cannot be produced from a DVD recorded in Dolby Digital (5.1 channel), Dolby Surround
(Pro Logic), DTS or MPEG Audio.
You should use an analogue connection to play Dolby Digital (5.1 channel) and MPEG Audio. (Dolby Surround (Pro Logic)
and DTS audio cannot be produced with an analogue connection).
Discs with linear PCM audio should play normally.
–10–
EN
Page 11
COAXIAL
DIGITAL INPUT
y
DIGITAL VIDEO
RL CB
CRY
AUDIO OUT
S-VIDEO
VIDEO OUT
COMPONENT
To
DIGITAL AUDIO
(COAXIAL) INPUT
jack
To D I GITAL AUDIO
(COAXIAL) OUT jack
Coaxial digital cable
(commercially available)
Dolby Digital (5.1 ch)/DTS/
MPEG Audio processor or amplifier
SETTING UP YOUR DVD PLAYER
Playing Dolby Digital (5.1 channel), DTS or MPEG audio
Connecting an amplifier with a Dolby Digital/DTS/MPEG Audio digital surround processor or a Dolby Digital/DTS/MPEG Audio
surround processor to your Player’s coaxial digital jack provides richer and more powerful audio play.
CC
Connection to a processor or amplifier with a coaxial digital input jack
You can make this connection using a coaxial digital cable.
NOTES:
• This connection is not possible if the processor or amplifier to which you want to connect does not have a coaxial digital
input jack.
• ANALOG AUDIO OUT of the DVD player is not available on the DTS audio.
“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are
trademarks of Dolby Laboratories.
HOW TO CONNECT TO A TV WITHOUT AUDIO/VIDEO INPUT JACKS
If your TV does not have RCA type audio and video input jacks it is still possible to connect this DVD player to your TV’s 75ohm coaxial antenna terminal using a commercially available Stereo Audio/Video RF Modulator. Connect the audio and
video outputs of the DVD player to the audio and video inputs on the RF Modulator, and then connect the coaxial output of
the RF Modulator (usually marked “TO TV”) to the 75 ohm coaxial antenna terminal on your TV. Follow the instruction supplied with the RF Modulator for more details.
If your TV’s 75 ohm coaxial antenna terminal is already occupied by an antenna or cable box connection, remove that cable
from your TV’s antenna terminal and reconnect it to the coaxial antenna input terminal of the RF Modulator (usually marked
“ANT IN”), then connect the RF modulator to your TV’s antenna terminal as described above.
NOTE
• The picture quality from DVD discs will not be as good if the DVD player is connected to the TV’s antenna terminal
through an RF Modulator.
–11–
EN
Page 12
DVD OPERATION
Basic Playback
VCDCDDVD
Getting started
•Turn on the power of the TV, amplifier and any other components which are connected to the DVD.
• Make sure the TV and audio received (commercially available) are set to the correct channel.
• When you play NTSC disk, the NTSC signal will convert
to a modified PAL signal.
1
Press OPERATE.
• “P-ON” will appear briefly on the display panel.
2
Press OPEN/CLOSE to open disc loading tray.
3
Place the chosen disc in the tray, with the label
facing up.
4
Press PLAY.
• Playback starts automatically.
5
Press STOP to stop playback.
NOTE:
•DVDs may have a region code. Your DVD player will not
play discs that have a region code different from the
region code of your DVD player.
General Features
DVD or Video CDs may contain menus to navigate the disc
and access special features. Press the appropriate numerical
key or use Arrow ( L / K / B / s ) to highlight your selection
in the DVD menu and press ENTER to confirm.
NOTE:
• Unless stated, all operations described are based on
remote control use. Some operations can be carried
out using the menu bar on the TV screen.
Cancelling PBC (for playback of a Video CD)
1
Insert a Video CD. (Playback will start automatically.)
2
Press STOP.
3
Enter track number of your choice with numerical
key pad.
4
PBC is now cancelled and the playback of the
Video CD will start.
Disc menus
DVD
1
Press MENU.
• The DVD’s main menu will appear.
2
If a title menu is no available, symbol may
appear on the TV screen.
3
If disc menu is available on the disc, audio language, subtitle options, chapters for the title and
other options will appear for selection.
4
Press Arrow ( L / K / B / s ) to select an item, and
ENTER to confirm selection.
–12–
Title Menu
1
Press TITLE.
• The title menu will appear.
2
If a title menu is no available, symbol may
appear on the TV screen.
3
Press Arrow ( L / K / B / s ) to select an item, and
ENTER to confirm selection.
• Playback will begin at the selected Title.
1
The title menu will appear.
2
Press numerical key pad to select the menu.
Playback will start.
Pause
1
During playback, press PAUSE.
• Playback will pause and sound will be muted.
2
To continue playback, press PLAY.
DVD
VCD
CDDVD
EN
Page 13
DVD OPERATION
Step by Step playback
1
During playback, press PAUSE.
• Playback will pause and sound will be muted.
2
The disc goes forward by one frame each time
PAUSE is pressed.
3
To exit step by step playback, press PLAY.
Resume
1
During playback, press STOP.
• Resume message will appear on the TV screen.
2
Press PLAY, playback will resume from the point
at which playback was stopped.
•To cancel resume, press STOP twice.
NOTE
• Some Video CDs with PBC function resume playback
from the beginning of the track.
Fast Forward / Reverse Search
1
During playback, press ggor hhrepeatedly to
select the required forward or reverse speed: x2,
x8, x30, x60.
2
To return to normal playback, press PLAY.
• During playback, press g or h repeatedly to select
the required forward or reverse speed: x2, x8, x30.
• Use ggor hhto select the required forward or
reverse at x16 the normal playback speed.
VCDDVD
VCDCDDVD
DVD
VCD
CD
Zoom
VCDDVD
The Zoom function allows you to enlarge the video image
and to pan through the enlarged image.
1
Press ZOOM during playback.
• Playback will continue.
2
Press ZOOM repeatedly to select the required
zoom factor: x2, x4 or OFF.
3
Use Arrow ( L / K / B / s ) to move the zoomed
picture across the screen.
4
To exit zoom mode, press ZOOM to OFF in the
menu bar.
Track
VCDCD
There are three ways to begin playback on an Audio CD at a
specific Track.
Using the Numerical key pads
1
Press numerical key pad to enter the desired
Tr ack number.
• Playback will start at the selected track.
•For single digit tracks (1-9), press a single number (eg.
track 3, press 3).
•To play track 26, press +10, 2, 6 on the numerical key
pad.
Using the DIRECT SKIP
1
Press DIRECT SKIP.
•The track search display appears.
2
Within 30 seconds, select a desired track number using
numerical key pad.
• Playback will start at the selected track.
NOTE:
• DIRECT SKIP doesn’t function when you play the
Video CD with PBC function.
Slow Motion
VCDDVD
1
During playback, press PAUSE.
2
Press gg.
• Slow motion playback will begin and sound will be
muted.
3
Press ggrepeatedly to select the required speed:
1/16, 1/8, 1/2 of the normal playback.
4
To return to normal playback, press PLAY.
Using the SKIP
1
Press SKIP GGto move to the next track.
2
Press SKIP GGor HHrepeatedly to skip subsequent or
to return of the current tracks.
•Track number will appear briefly on the DVD display
panel.
• When playback is paused, pressing SKIP will start the
track playing automatically.
NOTE:
• SKIP H G are not available when playback is
stopped.
–13–
HH GG
EN
Page 14
DVD OPERATION
Title/chapter
1
Press DIRECT SKIP to display the Title/Chapter
Search on the TV screen.
2
Enter the desired title/chapter number using
numerical key pad.
Time Search
(without PBC function)
VCD
CDDVD
1
During playback, press DIRECT SKIP twice to dis-
play the Time Search on the TV screen.
2
Within 30 seconds, enter a desired disc time using
numerical key pad.
• Playback will start at the specified time.
3
Press CLEAR to erase the incorrect input.
Repeat
• REPEAT are available only during playback.
REPEAT TITLE/CHAPTER
•To repeat the current chapter, press REPEAT.
REPEAT CHAPTER appears on the TV screen.
•To repeat the current title, press REPEAT twice.
REPEAT TITLE appears on the TV screen.
•To exit Repeat mode, press REPEAT three times.
REPEAT OFF appears on the TV screen.
DVD
DVD
Programme
CD
You may determine the order in which tracks will play.
1
In stop mode, press MODE.
• The programme screen will appear.
PROGRAM TIME 0:00:00 1/1
--
START: PLAY
RANDOM
2
Enter the desired track numbers using numerical
: MODE
DELETE
EXIT
: CLEAR
: RETURN
key pad.
3
Press PLAY to play the programmed tracks.
Random Playback
CD
This shuffles the playing order of tracks instead of playback
in the sequence.
1
In stop mode, press MODE twice.
• RANDOM screen appears.
2
Press PLAY to start random playback.
REPEAT TRACK
VCDCD
•To repeat the current track, press REPEAT.
REPEAT TRACK appears on the TV screen.
•To repeat the entire disc, press REPEAT twice.
REPEAT ALL appears on the TV screen.
•To exit Repeat mode, press REPEAT three times.
REPEAT OFF appears on the TV screen.
NOTE:
• Repeat playback is not available when you play the Video
CD with PBC function.
REPEAT A-B
VCDCDDVD
1
Press Repeat A-B at your chosen starting point.
• REPEAT A- appears briefly on the TV screen.
2
Press Repeat A-B again at your chosen end point.
• REPEAT A-B appears briefly on the TV screen, and the
repeat sequence begins.
3
To exit the sequence, press Repeat A-B.
–14–
EN
Page 15
–15–
EN
DVD OPERATION
When a CD with MP3 files in the DVD player, the MP3 menu
will appear on the TV screen.
In stop mode, press K or L to select the desired
Album or Track.
•To play a choosen track, press PLAY or ENTER.
•To play a choosen album, press
K or L to select the
desired track,then press PLAY or ENTER.
• Choose FIRST PLAY to start playback from the beginning of the listed tracks.
• Press
TITLE to return to the first item.
Press STOP to stop playback.
NOTE:
• Folders are known as Albums; files are known as Tracks.
2
1
MP3
MP3 Playback
You can check the MP3 files during playback.
Press ON SCREEN.
• The playing track will be highlighted.
Press ON SCREEN again to show the elapsed
playing time appear at the top of the display.
• will be displayed when the repeat play has been
selected.
T- indicates Track repeat
A- indicates Album (folder) repeat
D - indicates Disc repeat
Press ON SCREEN again to exit.
3
2
1
MP3
On Screen Information
Track Selection
Press DIRECT SKIP during playback.
• The SEARCH menu will appear.
• The current track will be highlighted.
Press K or L to select a desired track.
Press
PLAY to start playing
Press
RETURN or DIRECT SKIP to exit.
4
3
2
1
MP3
Press MODE during playback is stopped.
Press
K or L to select a track, then press ENTER.
• Press CLEAR to erase the incorrect input.
Press PLAY to start programmed playback.
3
2
1
MP3
Press MODE twice during playback is stopped.
Press
PLAY to play the tracks in random order.
2
1
MP3
Programmed
Random Playback
The DVD player allows you to select a language during DVD
disc (if multi language available) playback.
Press AUDIO during playback.
Press
AUDIO repeatedly to select your desired
language.
NOTE:
• When a DVD disc with MPEG 5.1CH Audio is played
back, MPEG 6.0CH might appear instead of MPEG
5.1CH on the screen.
2
1
DVD
Audio Language
Press AUDIO repeatedly during playback to select
between AUDIO STEREO, AUDIO L-CH or AUDIO
R-CH.
AUDIO STEREO - both right and left channels are active
(stereo)
AUDIO L-CH - only left channel is active
AUDIO R-CH - only right channel is active
1
VCDCD
Stereo Sound Mode
ALBUM NAME
+ALBUM01
TRACK11
TRACK12
TRACK13
TRACK14
SELECT: /ENTER:
RETURN:
1/15
START: PLAY
PROGRAM - ALBUM01
+ALBUM11
+ALBUM12
TRACK11
TRACK12
TRACK13
START
: PLAY DELETE: CLEAR
RANDOM: MODE
TRACK11
1/11 1/1
EXIT
: RETURN
Page 16
DVD OPERATION
Subtitle Language
DVD
The DVD player allows you to select a language for subtitle
during DVD disc (if available) playback.
1
Press SUBTITLE during playback.
2
Press SUBTITLE repeatedly to select your desired
subtitle language.
• The available languages appears on the right of the
subtitle display.
3
To turn off subtitles, press s / B or SUBTITLE
repeated until OFF appears.
Camera Angle
DVD
Some DVD discs contain scenes which have been shot
simultaneously from various angles.
1
Press ANGLE during playback.
2
Press ANGLE repeatedly to select your desired
different angle appears on the right of the angle
display.
Parental Control
DVD
Password
Parental Control limits the disc viewing that exceed your settings with a password or playback will stop.
The ‘Parental Control’ feature allows you to prevent discs
from being played by your children or to have certain discs
played with alternative scenes.
1
Press SETUP during playback is stopped.
SET-UP
1.
LANGUAGE
2.
DISPLAY
3.
AUDIO
4.
PARENTAL
SELECT:
/ SET
EXIT
: SETUP
2
Press K or L to select PARENTAL, then press
ENTER.
SET-UP
PARENTAL CONTROLS
PASSWORD
Please enter a 4-digit password.
- - - -
: ENTER
CANCEL
: RETURN
Changing the On-Screen Display
DVD
You can check information about the current disc by pressing
the ON SCREEN on the remote control.
1
Press ON SCREEN during playback to show cur-
rent Chapter.
• The elapsed and remaining playing time of the current
chapter will be displayed.
2
Press ON SCREEN again to show current Title.
• The elapsed and remaining playing time of the current
title will be displayed.
3
Press ON SCREEN the third time.
• The BIT RATE, layer number (if available) and the current repeat setting will be displayed.
4
Press ON SCREEN the fourth time to remove the
display.
VCDCD
1
Press ON SCREEN during playback, the current
Tr ack will be displayed on the TV screen.
• The elapsed and remaining playing time of the current
title will be displayed.
2
Press ON SCREEN again to show current Total
Tr ac k .
• The elapsed and remaining playing time of the current
total track will be displayed.
3
Press ON SCREEN the third time to remove the
display.
–16–
CANCEL
EXIT
: SETUP
3
Enter your four-digit password.
: RETURN
• If for the first time, enter any four digits, then press
ENTER.
•To change the password, press K or L to select
CHANGE, then press ENTER.Enter the four-digit pass-
word, then press ENTER.
4
Press SETUP to exit.
IF YOU FORGET THE PASSWORD
1
Press SETUP during playback is stopped.
2
Press K or L to select PARENTAL, then press
ENTER.
3
Enter the 4, 7, 3, 7.
•Password will be cleared and parental level will be set
ALL.
4
Press SETUP to exit.
EN
Page 17
DVD OPERATION
Parental Level
DVD
Parental Level allows you to set the rating level of your DVD
discs. Playback will stop if the disc’s ratings exceed the level
you set.
1
Press SETUP during playback is stopped.
2
Press K or L to select PARENTAL, then press
ENTER.
3
Enter your four-digit password.
4
Press K or L to select PARENTAL LEVEL, then
press ENTER.
SET-UP
PARENTAL CONTROLS
1.
PARENTAL LEVEL ALL
2.
CHANGE
SELECT:
/ SET
EXIT
: SETUP
5
Press K or L to select the desired level.
6
Press SETUP to exit.
: ENTER
CANCEL
: RETURN
Marker Setup Screen
(without PBC function)
CDDVD
Use markers to memorise your favourite places on a disc.
1
Press DIRECT SKIP three times during playback.
• The display screen and Markers will appear on the TV
screen.
2
Press s or B to select 1, 2, 3, 4 or 5 and ensure
that “NOT SET” appears in the display.
3
When reaches the desired point, press ENTER.
• The Title or Track and elapsed playing time will appear
in the TV screen.
4
To return to the Marker later, press DIRECT SKIP
three times during playback and s or B to choose
the desired marker, then press ENTER.
NOTE:
• Opening the disc tray or turning off the power or select
AC at step and press ENTER will erase all Markers.
2
VCD
–17–
EN
Page 18
DVD SETUP
Audio Setting
Choose the appropriate Audio settings for your equipment as
it only affect during the playback of DVD discs of the DVD
player.
NOTE:
• These audio settings are effective only when using a digital connection. Although you may change the settings from
the on-screen display, these audio settings do not actually
affect the sound when using an analogue connection.
1
Press SETUP during playback is stopped.
2
Press K or L to select AUDIO, then press ENTER.
3
Press K or L to choose the below items and press
ENTER repeatedly to turn the setting ON or OFF.
Dynamic Range Control (DRC):
•To compress the range of sound volume.
• The default setting is OFF.
Dolby Digital :
Set to BITSTREAM when the unit is connected to Dolby
Digital Decoder.
(BITSTREAM : Output by Dolby Digital)
(D-PCM : Conver t the Dolby Digital to D-PCM)
• The default setting is BITSTREAM.
DTS:
Set to ON when the unit is connected to DTS Decoder.
(ON: Output by DTS)
• The default setting is OFF.
MPEG:
Set to ON when the unit is connected to MPEG Decoder.
(ON : Output by MPEG sound)
(OFF: Conver t the MPEG to PCM)
• The default setting is OFF.
DOWN SAMPLING:
• Press ENTER, then K or L to select AUTO, 48kHz or
96kHz. Press ENTER again to confirm selection.
• Select 96kHz if the disc was recorded in PCM 96kHz,
otherwise select 48kHz.
• The default setting is AUTO.
4
Press SETUP to exit.
Display Setting
You can change certain aspects of the DVD’s display
screens, on-screen messages and the display panel on the
front of the DVD player.
1
Press SETUP during playback is stopped.
2
Press K or L to select DISPLAY, then press
ENTER.
3
Press K or L to select the below items, then press
ENTER.
TV Aspect:
• Press K or L for an item selection, then press
ENTER.
• Select 4:3 LETTER BOX for a black bars appears on
the top and bottom of the screen.
• Select 4:3 PAN & SCAN for a full height picture with
both sides trimmed.
• Select 16:9 WIDE if a wide-screen TV is connected to
the DVD player.
Panel Display:
• Press K or L to select BRIGHT, DIMMER and AUTO,
then press ENTER.
• This adjust the brightness of the display panel with the
factory default BRIGHT.
•When AUTO is selected, the display dims only during
playback.
Angle Icon:
• Press ENTER repeatedly to turn Angle icon ON or
OFF.
• The default setting is ON.
Auto Power Off:
• Press ENTER repeatedly to turn Auto Power ON or
OFF.
• The default setting is ON and it will turn the DVD player
to off automatically after 35 minutes of no use.
4
Press SETUP to exit.
Black Level Setting
Adjust the Black Level Settings to make the black parts of
the picture as bright as you preferred.
1
Press MODE during playback.
2
Press ENTER repeatedly to select ON or OFF.
ON: makes the dark parts brighter.
OFF: shows the original picture as recorded.
–18–
EN
Page 19
DVD SETUP
1.
AUDIO ORIGINAL
2.
SUBTITLE OFF
3.
DISC MENU ORIGINAL
4.
PLAYER MENU ENGLISH
SET-UP
EXIT
: SETUP
CANCEL
: RETURN
SELECT:
/ SET
: ENTER
LANGUAGE CONTROLS
Language Setting
Language options are not available is all discs.
1
Press SETUP during playback is stopped.
2
Press K or L to select LANGUAGE, then ENTER
to confirm.
• The setup screen will be displayed.
3
Press K or L to select AUDIO, SUBTITLE, DISC
MENU or PLAYER MENU, then ENTER to confirm.
4
Press K or L to select a setting, then press
ENTER.
• If OTHER is selected in the AUDIO, SUBTITLE or DISC
MENU screen, press four-digit number to enter the
code for the desired language.
•You can only select other languages if its available on
the disc.
5
Press SETUP to exit.
Languag
Abkhazian 4748
Afar 4747
Afrikaans 4752
Albanian 6563
Amharic 4759
Arabic 4764
Armenian 5471
Assamese 4765
Aymara 4771
Azerbaijani 4772
Bashkir 4847
Basque 5167
e Code Langua
A-B
French [FRE] 5264
Frisian 5271
Galician 5358
Georgian 5747
German [GER] 5051
Greek [GRE] 5158
Greenlandic 5758
Guarani 5360
Gujarati 5367
Hausa 5447
Hebrew 5569
Hindi 5455
Hungarian [HUN] 5467
Bengali;Bangla 4860
Bhutani 5072
Bihari 4854
Bislama 4855
Breton 4864
Bulgarian 4853
Burmese 5971
Byelorussian 4851
C-E
Cambodian 5759
Catalan 4947
Chinese [CHI] 7254
Corsican 4961
Croatian 5464
Czech 4965
Danish [DAN] 5047
Dutch [DUT] 6058
English [ENG] 5160
Icelandic [ICE] 5565
Indonesian 5560
Interlingua 5547
Interlingue 5551
Inupiak 5557
Irish [IRI] 5347
Italian [ITA] 5566
Japanese [JPN] 5647
Javanese 5669
Kannada 5760
Kashmiri 5765
Kazakh 5757
Kinyarwanda 6469
Kirghiz 5771
Kirundi 6460
Korean [KOR] 5761
Kurdish 5767
Esperanto 5161
Estonian 5166
F-H
Faroese 5261
Fiji 5256
Finnish [FIN] 5255
If you choose a Language that has a 3 letter language code, the code will be displayed everytime you change
the Audio or Subtitle language setting on pages 15 and 16. If you choose any other languages, ‘---’ will be displayed instead. (3 letter language code is written in bracket.)
Laothian 5861
Latin 5847
Latvian;Lettish 5868
Lingala 5860
Lithuanian 5866
ge Code Languag e Code Language Code
Macedonian 5957
Malagasy 5953
Malay 5965
Malayalam 5958
Maltese 5966
Maori 5955
Marathi 5964
Moldavian 5961
Siswat 6565
Slovak 6557
Slovenian 6558
Somali 6561
Spanish [SPA] 5165
Sundanese 6567
Swahili 6569
Swedish [SWE] 6568
Mongolian 5960
I-K
L-N
Nauru 6047
Nepali 6051
Norwegian [NOR] 6061
O-R
Occitan 6149
Oriya 6164
Oromo(Afan) 6159
Panjabi 6247
Pashto;Pushto 6265
Persian 5247
Polish 6258
Por tuguese [POR] 6266
Quechua 6367
Rhaeto-Romance 6459
Romanian [RUM] 6461
Russian [RUS] 6467
S
Samoan 6559
Sangho 6553
Sanskrit 6547
Scots Gaelic 5350
Serbian 6564
Serbo-Croatian 6554
Sesotho 6566
Setswana 6660
Tagalog 6658
Tajik 6653
Tamil 6647
Tatar 6666
Telugu 6651
Thai 6654
Tibetan 4861
Tigrinya 6655
Tonga 6661
Tsonga 6665
Tur kish [TUR] 6664
Tur kmen 6657
Twi 6669
U-Z
Ukrainian 6757
Urdu 6764
Uzbek 6772
Vietnamese 6855
Volapuk 6861
Welsh 4971
Wolof 6961
Xhosa 7054
Yiddish 5655
Yo ruba 7161
Zulu 7267
Shona 6560
Sindhi 6550
Singhalese 6555
–19–
T
EN
Page 20
TROUBLESHOOTING
WARNING
Under no circumstances should you try to repair the system yourself, as this will invalidate the warranty. Do not open the
system as there is a risk of electric shock.
If a fault occurs, first check the points listed below before taking the system for repair.
Problem Solution
No power –Check if the AC power cord is properly connected.
No picture –Check if the TV is switched on.
–Check the video connection
Distorted picture –Sometimes a small amount of picture distortion may appear .This is
not a malfunction.
Completely distorted picture or –Connect DVD player directly to the TV.
black/white picture with DVD –Make sure the disc is compatible with the DVD player.
No sound or distorted sound –Adjust the volume.
–Check that the speakers are connected correctly.
No audio at digital output –Check the digital connections.
–Check if the audio format of the selected audio language matches
your receiver capabilities.
No DTS audio at analog output –Use a DIGITAL AUDIO OUT jack when outputting the DTS audio.
No sound and picture –Check that the VIDEO/AUDIO cable is connected to the correct
device (See Connecting to a TV)
Picture freezes momentarily –Check the disc for fingerprints/scratches and
during playback clean with a soft cloth wiping from centre to edge.
Disc can’t be played –Ensure the disc label is facing up.
–Check if the disc is defective by trying another disc.
No return to start-up screen when –Reset the unit by switching the player off, then on
disc is removed again.
The player does not respond to –Aim the remote control directly at the sensor on
the remote control the front of the player.
–Reduce the distance to the player.
–Replace the batteries in the remote control.
–Re-insert the batteries with their polarities (+/– signs) as indicated.
Buttons do not work or player stops –To completely reset the player, unplug the AC
responding cord from the AC outlet for 5-10 seconds.
Player does not respond to some –Operations may not be permitted by the disc.
operating commands during playback. Refer to the instructions of the disc.
DVD player cannot read –Use a commonly available cleaning CD/DVD to
CDs/DVDs clean the lens before sending the DVD player for repair.
If you are unable to remedy a problem by following these hints, consult your dealer or service centre.
–20–
EN
Page 21
SPECIFICATIONS
PRODUCT TYPE
DVD Player
DISCS
DVD video
Audio CD
Video CD
CD-R
CD-RW
OUTPUT SIGNAL FORMAT
PAL colour
FREQUENCY RESPONSE
DVD (linear sound) : 20 Hz to 20 kHz (sample rate: 48 kHz)
20 Hz to 44 kHz (sample rate: 96 kHz)
CD : 20 Hz to 20 kHz
SIGNAL-TO-NOISE RATIO (S/N RATIO)
CD : 110 dB (JEITA)
DYNAMIC RANGE
DVD (linear sound) : 95 dB
CD : 94 dB (JEITA)
TOTAL DISTORTION FACTOR
CD : 0.005% (JEITA)
WOW AND FLUTTER
Below the measurement limitation (+/-0.001% W PEAK)
(JEITA)
CONNECTIONS
Video output
Component video output One pin jack (Y), 1 Vpp (75 ohm)
S-Video output Mini DIN 4-pin jack (75 ohm)
Analog audio output Two RCA connectors (one left
Coaxial digital audio output One pin jack, 500mVpp (75 ohm)
POWER SOURCE
110-240 V ~ +/- 10%, 50/60 Hz +/- 0.5%
POWER CONSUMPTION
14 W (standby: 3.8W)
OPERATING TEMPERATURE
5°C to 40°C
DIMENSIONS
W 435mm
H 75mm
D 211mm
WEIGHT
Approx 2.1kg
• Designs and specifications are subject to change
without notice.
One RCA connector, 1 Vpp (75 ohm)
Two pin jacks CR/CB, 700m Vpp
(75 ohm)
channel, one right channel)
2 Vrms (47 kilo-ohm)
MAINTENANCE
Cleaning the Cabinet
• Use a soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing alcohol, spirits,
ammonia or abrasives.
Cleaning Discs
• When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the centre out. Do not wipe in a circular
motion.
• Do not use solvents such as benzine, thinner, commercially available cleaners, or antistatic spray intended for analogue
records.
Cleaning the disc lens
• After prolonged use, dirt or dust may accumulate at the disc lens. To ensure good playback quality, clean the disc lens
with CD Lens Cleaner or any commercially available cleaner. Follow the instructions supplied with the cleaner.
Make your contribution to the environment!!!
• Spent batteries do not belong in the dustbin.
• You can dispose of them at a collection point for spent batteries or special waste.
Contact your council for details.
Page 22
MEMO
–22–
EN
Page 23
MEMO
–23–
EN
Page 24
0VMN03272A
E56B1HD/E56B2PD ★★★
SHARP CORPORATION
Osaka, Japan
Loading...