DVD Video Player
MODEL
DV-S1S(S)
OPERATION MANUAL
The region number for this DVD player is 2.
2
NTSC/PAL
Please read this Operation Manual carefully
before using your DVD Video Player.
SAFETY INFORMATION
This equipment complies with the requirements of
Directives 89/336/EEC and 73/23/EEC as amended by
93/68/EEC.
Dieses Gerät entspricht den Anforderungen der EGRichtlinien 89/336/EWG und 73/23/EWG mit Änderung
93/68/EWG.
Ce matériel répond aux exigences contenues dans les
directives 89/336/CEE et 73/23/CEE modifiées par la direc-
tive 93/68/CEE.
Dit apparaat voldoet aan de eisen van de richtlijnen
89/336/EEG en 73/23/EEG, gewijzigd door 93/68/EEG.
Dette udstyr overholder kravene i direktiv nr. 89/336/EEC
og 73/23/EEC med tillæg nr. 93/68/EEC.
Quest’ apparecchio è conforme ai requisiti delle direttive
89/336/EEC e 73/23/EEC, come emendata dalla direttiva
93/68/EEC.
Este equipamento obedece às exigências das directivas
89/336/CEE e 73/23/CEE, na sua versão corrigida pela
directiva 93/68/CEE.
Este aparato satisface las exigencias de las Directivas
89/336/CEE y 73/23/CEE, modificadas por medio de la
93/68/CEE.
Denna utrustning uppfyller kraven enligt riktlinjerna
89/336/EEC och 73/23/EEC så som kompletteras av
93/68/EEC.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO
RAIN OR MOISTURE.
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, AND ANNOYING INTERFERENCE, USE
THE RECOMMENDED ACCESSORIES ONLY.
Laser Diode Properties
Material: GaAs
Wave length: DVD: 650 nm
CD: 780 nm
Emission Duration: Continuous
Laser output: Max. 0.8 mW
Power Cord Protection
To avoid any malfunctions of the Player, and to protect
against electric shock, fire or personal injury, please observe
the following.
• Hold the plug firmly when connecting or disconnecting the
AC power cord.
• Keep the AC power cord away from heating appliances.
• Never put any heavy object on the AC power cord.
• Do not attempt to repair or reconstruct the AC power cord
in any way.
• This Player is classified as a CLASS 1 LASER product.
• The CLASS 1 LASER PRODUCT label is located on the
rear cover.
• This product contains a low power laser device.To ensure
continued safety do not remove any cover or attempt to
gain access to the inside of the product. Refer all servicing to qualified personnel.
Dette produktet oppfyller betingelsene i direktivene
89/336/EEC og 73/23/EEC i endringen 93/68/EEC.
Tämä laite täyttää direktiivien 89/336/EEC ja 73/23/EEC
vaatimukset, joita on muutettu direktiivillä 93/68/EEC.
Note:
This Player can be used only where the power supply is
AC 220V-240V, 50/60Hz. It cannot be used elsewhere.
CAUTION:
USE OF CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OF PROCEDURES OTHER
THAN THOSE SPECIFIED HEREIN MAY RESULT
IN HAZARDOUS RADIATION EXPOSURE.
AS THE LASER BEAM USED IN THIS PLAYER IS
HARMFUL TO THE EYES, DO NOT ATTEMPT TO
DISASSEMBLE THE CABINET. REFER SERVICING TO QUALIFIED PERSONNEL ONLY.
–2–
CLASS 1
LASER PRODUCT
AUDIO OUT
DIGITAL VIDEO
RL
VIDEO OUT
AV (TV)
S-VIDEO
CAUTION - VISIBLE LASER
RADIATION WHEN OPEN AND
INTERLOCK DEFEATED.
AVOID EXPOSURE TO BEAM.
EN
SAFETY INFORMATION
Location and Handling
• Do not place your Player in enclosed spaces or do not
cover it to prevent excessive temperatures inside the
Player.
• Do not place the Player in direct sunlight, or near heat
sources.
• Keep the Player away from strong magnetic objects.
• Do not place any object containing water or other liquids
on the Player. In the event that liquid should enter the
cabinet, unplug the Player immediately and contact the
retailer or service centre approved by SHARP immediately.
• Do not remove the Player cabinet. Touching parts inside
the cabinet could result in electric shock and/ or damage
to the Player. For service and adjustment inside the cabinet, call a qualified dealer or service centre approved by
SHARP.
Nonuse Periods
When the Player is not being used, switch the Player to the
Standby mode.
When left unused for a long period of time, the Player should
be unplugged from the household AC outlet.
No Fingers or Other Objects Inside
Do not put any foreign object on the disc tray.
Stacking
Place the Player in a horizontal position, and do not place
anything heavy on it.
Condensation
Moisture may form on the pickup lens in the following conditions:
• immediately after a heater has been turned on.
• in a steamy or very humid room.
• when the Player is suddenly moved from a cold environ-
ment to a warm one.
If moisture forms inside this Player, it may not operate properly.
In this case, turn on the power and wait about one hour for
the moisture to evaporate.
Cleaning
Unplug your Player before cleaning. Use a damp cloth for
cleaning. Do not use cleaning fluids or aerosols which could
enter the Player and cause damage, fire, or electrical shock.
These substances may also deteriorate the finish of your
Player.
If there is Noise Interference on the TV While a
Broadcast is being Received
Depending on the reception condition of the TV, interference
may appear on the TV monitor while you watch a TV broadcast and the Player is left on. This is not a malfunction of the
Player or the TV.To watch a TV broadcast, turn off the
Player.
Service
Do not attempt to service this Player yourself. Please refer
any service to the nearest service centre approved by
SHARP.
Copyright
Audio-visual material may consist of copyrighted works which
must not be recorded without the authority of the owner of
the copyright. Please refer to relevant laws in your country.
Copy Protection
This Player supports Macrovision copy protection. On DVDs
that include a copy protection code, if the contents of the
DVD are copied using a VCR, the copy protection code prevents the videotape copy from playing normally.
Apparatus Claims of U.S.Patent Nos. 4,631,603,
4,577,216, 4,819,098 and 4,907,093 licensed for limited
viewing uses only.
This product incorporates copyright protection technology
that is protected by method claims of certain U.S. patents
and other intellectual property rights owned by Macrovision
Corporation and other rights owners. Use of this copyright
protection technology must be authorized by Macrovision
Corporation, and is intended for home and other limited
viewing uses only unless otherwise authorized by
Macrovision Corporation. Reverse engineering or disassembly is prohibited.
Recommended Measures for Optimum Picture
Excellence
The Player is a precision device that is constructed using
extremely accurate technology.
Soiling or friction affecting the pickup lens or disc drive can
impair the image quality. At the worst, neither video nor audio
will be played back. Contact your authorized Sharp supplier
for details.
Do not attempt to clean the pickup lens yourself.
–3–
EN
PRECAUTIONS
2
SUPPLIED ACCESSORIES
• Remote control
• Two R6 (AA) batteries
• Operation Manual
SYMBOLS USED IN THIS MANUAL
The following symbols appear below in some headings and
notes in this manual, with the following meanings!
DVD
: Description refers to playback of DVD video discs.
CD
: Description refers to playback of audio CDs.
MP3
: Description refers to playback of MP3 discs.
PLAYABLE DISCS
This DVD player conforms to the PAL colour system. Also
you can play discs recorded with the NTSC system via a PAL
system TV set.
•Some discs include region codes as shown below.
•The number inside the symbol refers to a region of the
world, and a disc encoded in a specific region format can
only be played back on DVD player with the same region
code.
–4–
EN
TABLE OF CONTENTS
SAFETY INFORMATION ....................................2
PRECAUTIONS...................................................4
SUPPLIED ACCESSORIES.....................................4
SYMBOLS USED IN THIS MANUAL .......................4
PLAYABLE DISCS....................................................4
FUNCTIONAL OVERVIEW .................................6
FRONT PANEL.........................................................6
REAR VIEW..............................................................6
Display Message ......................................................6
REMOTE CONTROL................................................7
Loading the Batteries ...............................................7
SETTING UP YOUR DVD PLAYER ....................8
Connecting a TV with AV OUT SCART socket ........8
If your TV has two SCART sockets ..........................8
Connecting a TV Equipped with S-VIDEO Input or
VIDEO/AUDIO Input Jacks .......................................9
Connecting to Audio Equipment...............................9
Playing Dolby Digital (5.1 channel), DTS or
MPEG audio ...........................................................10
CONNECTIONS - TV, VCR, DIGITAL SET TOP BOX
- AND DVD PLAYER.........................................11
DVD OPERATION .............................................12
Basic Playback .......................................................12
General Features....................................................12
Disc menus.............................................................12
Title Menu...............................................................12
Pause .....................................................................12
Step by Step playback ...........................................13
Resume ..................................................................13
Fast Forward / Reverse Search..............................13
Slow Motion............................................................13
Zoom ......................................................................13
Track .......................................................................13
Title/chapter............................................................14
Time Search ...........................................................14
Repeat ....................................................................14
REPEAT TITLE/CHAPTER................................14
REPEAT TRACK................................................14
REPEAT A-B......................................................14
Programme.............................................................14
Random Playback...................................................14
MP3 Playback.........................................................15
On Screen Information ...........................................15
Track Selection .......................................................15
Random Playback .................................................15
Programmed...........................................................15
Audio Language .....................................................15
Stereo L/R playback ...............................................15
Subtitle language / switch off..................................16
Camera Angle.........................................................16
Changing the On-Screen-Display...........................16
Parental control / Password....................................16
IF YOU FORGET THE PASSWORD .................16
Marker Setup Screen .............................................17
DVD SETUP ......................................................18
Audio Setting (digital output only)...........................18
Black Level Setting.................................................18
Display Setting........................................................18
TV Aspect...............................................................18
Panel Display..........................................................18
Angle Icon...............................................................18
Auto Power Off .......................................................18
Language Setting ...................................................19
TROUBLESHOOTING ......................................20
SPECIFICATIONS .............................................21
MAINTENANCE ................................................21
–5–
EN
DIGITAL VIDEO
RL
AUDIO OUT
S-VIDEO
VIDEO OUT
AV (TV)
10 11 12 13 1514
Power on
No disc inserted
Tray open
Tray closed
Loading the Disc
Power off
PLAY
STOP
STILL/STILL/PAUSEPAUSE
STANDBYSTANDBY
OPEN/CLOSE
SKIP
REV
FWD
OPERATEOPERATE
2 43
5
1
9
87 6
FUNCTIONAL OVERVIEW
FRONT PANEL
REAR VIEW
1. OPERATE
to switch the player to ON or OFF
2. Disc tray
3. OPEN/CLOSE
to open/close the disc tray
4. PLAY
to start, pause or resume disc playback
5. STOP
to stop playback
6. FWD/SKIP
goes to next chapter or track during playback; press and
hold for three seconds for a forward search
7. SKIP/REV
goes to previous chapter or track during playback; press
and hold for three seconds for a reverse search
8. STILL/PAUSE
to pause the current disk operation
9. Display, Remote Sensor, STANDBY LED
Display Message
10. MAINS (AC Power Cord)
standard AC outlet (220–240 V AC/50 Hz)
11. DIGITAL (Digital audio out)
connects AUDIO input of a digital (coaxial) audio
decoder.
12. AUDIO OUT (Left/Right)
connect to AUDIO inputs of an amplifier, receiver or
stereo system
13. VIDEO OUT
connect to the Video Input of a TV.
14. S-VIDEO Out
connect to a TV with S-Video inputs
15. AV (TV)
connect SCART cable to a TV
Caution: Do not touch the inner pins of the jacks on the
rear panel. Electrostatic discharge may cause permanent
damage to the player.
–
6 –
EN
FUNCTIONAL OVERVIEW
REMOTE CONTROL
10
11
12
13
14
1
OPERATE
2
3
4
5
6
ON SCREEN
AUDIO
SUB TITLE
ANGLE
REPEAT
123
456
789
CLEAR
C
7
8
9
SETUP
TITLE
MODE
ZOOM
DIRECT SKIP
PLAY
STOP
0 +10
SKIPSTILL/PAUSEA-B
ENTER
OPEN/
CLOSE
FWDREV
MENU
RETURN
15
Loading the Batteries
1. Open the battery compartment cover.
2. Insert two R6 (AA) batteries, with each one oriented
correctly.
3. Close the cover.
NOTES
• Do not mix alkaline and manganese batteries.
• Do not mix old and new batteries.
25
24
23
22
21
20
19
18
17
16
1. ON SCREEN
to access or remove the display screen during DVD or
Audio CD playback
2. OPERATE
switch DVD player ON or OFF
3. AUDIO
to choose audio languages or sound modes
4. SUBTITLE
subtitle language DVD selector
5. ANGLE
select DVD camera angle of view (if DVD contains different angles)
6. REPEAT
repeat chapter, track, title, disc
7. A-B REPEAT
repeat a specific segment
8. CLEAR
to reset the setting
9. STILL/PAUSE
pause playback temporarily / frame-by-frame playback
hh
10.
to view DVD picture in fast reverse motion
11. PLAY
to start a DVD disc playback
12. SETUP
to access or remove the DVD setup menu
13. MODE
to set up programmed or random playback (Audio CD)
to set the black level during DVD playback.
14. ZOOM
enlarge DVD video image
15. TITLE
to display title menu of a disc
16. ENTER
acknowledge menu selection
17. RETURN
to return previous or remove setup menu
18. Arrow(LKBs)
(left/right/up/down) select an item in the menu
19. MENU
to display the menu of the DVD disc
20. STOP
to stop a DVD disc playback
gg
21.
to view DVD picture in fast forward motion
22. SKIP H,G
to skip chapter/tracks
23. 0-9 numerical key pad
select numbered items in a menu
+10
use this button to enter number 10 and above
24. OPEN/CLOSE
to open/close the disc tray
25. DIRECT SKIP
to locate a desired point
–7–
EN
SETTING UP YOUR DVD PLAYER
CAUTION:
• Be sure to turn off the Player and equipment to be connected before connecting.
• Read through the operation manual for the equipment to be connected.
• Be sure that the colours of the jacks and plugs match up when using a VIDEO/AUDIO cable.
• Be sure to keep the Player connection cables separate from the TV antenna cable when you install the Player, because it
may cause electrical interference when you are watching television programs.
Connecting a TV with AV OUT SCART socket
DVD Player
AUDIO OUT
VIDEO OUT
AV (TV)
Use the SCART cable (commercially available) to connect
the Player to your TV.
If your TV has two SCART sockets
DIGITAL
RL
VIDEO
To AV OUT
SCART
To SCART
input
VIDEO OUT
AUDIO OUT
VIDEO
DIGITAL
RL
To AV OUT
SCART
SCART Cable
(commercially available)
TV
S-VIDEO
S-VIDEO
SCART Cable
(commercially available)
AV (TV)
SCART OUTPUT
TV
DVD Player
VCR
To SCART
output
SCART Cable
(commercially available)
To SCART
input
To SCART
input
NOTE:
•
The player is continuously outputting the RGB and the VIDEO (COMPOSEITE) signal. Select either (RGB or COMPOSITE) signal on your TV side.
Some TV can recognize the RGB signal automatically. In this case, the player
outputs the RGB signal prior to the VIDEO (COMPOSITE) signal.
•
When you play the VCR, please select the VIDEO (COMPOSITE) signal on
your TV. Otherwise the VCR image will not be seen.
Please refer to your TV’s manual for more infomation.
–8–
EN
SETTING UP YOUR DVD PLAYER
TV (with external input jacks)
DVD Player
RL
AUDIO
IN
S-VIDEO
INPUT
VIDEO
IN
V
IDEO/AUDIO cable
(commercially available)
S-VIDEO cable
(commercially available)
DIGITAL
RL
AUDIO OUT
VIDEO
S-VIDEO
VIDEO OUT
AV (TV)
To VIDEO/AUDIO
OUT jacks
To S-VIDEO
OUT jack
(Yellow)(Red)
(White)
(Yellow)
(Red)
(White)
To VIDEO/AUDIO
input jacks
To S-VIDEO
input jack
DVD Player
ANALOG INPUT
R
L
DIGITAL
RL
AUDIO OUT
VIDEO
S-VIDEO
VIDEO OUT
AV (TV)
AUDIO cable
(commercially available)
Amplifier of stereo system, etc.
To AUDIO
OUT jacks
(Red) (White)
(Red)
(White)
Jack and Plug Colours
To amplifier
audio input jacks
Audio Left: White
Audio Right: Red
Connecting a TV Equipped with S-VIDEO Input or VIDEO/AUDIO Input Jacks
When you want to achieve a better video image by connecting a TV equipped with an S-VIDEO input connector to the Player,
you should use an S-VIDEO cable (commercially available) to connect the TV to the Player.
• When the Player is connected to a TV using both a VIDEO cable and an S-VIDEO cable, only the S-VIDEO connection is
enabled (the VIDEO connection is disabled).
• You will not be able to hear all of the sound being output by the Player if you use the VIDEO/AUDIO cable (commercially
available) to a monaural TV that has only one AUDIO input jack.
NOTE:
• Be sure that the colours of the jacks and plugs match up when connecting the cable.
• Connect the Player directly to the TV. If you attempt to view video on a TV connected via a VCR, the copy protection func-
tion will scramble the picture.
• If you want to listen to the audio through audio equipment, connect only the S-VIDEO or VIDEO cable to the TV.
Connecting to Audio Equipment
Connecting the Player to audio equipment provides normal stereo sound.
Playing 2 channel audio
CC
Analogue audio connection
–9–
EN
SETTING UP YOUR DVD PLAYER
CC
Digital audio connection
You can make this connection using a coaxial digital cable.
DVD Player
AUDIO OUT
DIGITAL
RL
VIDEO OUT
VIDEO
AV (TV)
S-VIDEO
Playing Dolby Digital (5.1 channel), DTS or MPEG
audio
Connecting an amplifier with a Dolby Digital/DTS/MPEG
Audio digital surround processor or a Dolby
Digital/DTS/MPEG Audio surround processor to your Player’s
coaxial digital jack provides richer and more powerful audio
play.
CC
Digital connection to a processor or amplifier
with a coaxial digital input jack
To COAXIAL
DIGITAL OUT
jack
Coaxial digital cable
(commercially available)
Audio equipment with
DIGITAL IN
COAXIAL
To coaxial digital
input jack
coaxial digital input jack
Digital Connection to an MD to Record a CD
Some Audio CDs have a short silent section between musical tracks. When sound from discs
such as these is digitally recorded by connecting the Player
directly to a digital recorder (such as an MD player),
the music may be recorded continuously and track numbers
may be lost.
CC
Digital Connection to Audio Equipment or MD
Player without a Dolby Digital Decoder
• Audio CD
Play the disc as you normally would, with the audio mode
set to “L+R”. With a digital connection, audio of a disc
recorded with DTS sounds abnormal in this case.
• DVD
With a digital connection, audio cannot be produced from
a DVD recorded in Dolby digital (5.1 channel), Dolby surround (Pro Logic), DTS or MPEG Audio.
You should use an analogue connection to play Dolby
Digital (5.1 channel) and MPEG Audio. (Dolby Surround
(Pro Logic) and DTS audio cannot be produced with an
analogue connection).
Discs with linear PCM audio should play normally.
You can make this connection using a coaxial digital cable.
DVD Player
VIDEO OUT
AUDIO OUT
VIDEO
DIGITAL
RL
To COAXIAL
DIGITAL OUT
jack
Coaxial digital cable
(commercially available)
DIGITAL IN
COAXIAL
To coaxial digital
input jack
S-VIDEO
AV (TV)
Dolby Digital (5.1 ch)/DTS/
MPEG Audio processor or amplifier
NOTES:
• This connection is not possible if the processor or amplifier to which you want to connect does not have a coaxial
digital input jack.
• ANALOG AUDIO OUT and AV (TV) of the DVD player are
not available on the DTS audio.
“DTS” and “DTS Digital Out” are trademarks
of Digital Theater Systems, Inc.
Manufactured under license from Dolby
Laboratories. “Dolby” and the double-D
symbol are trademarks of Dolby
Laboratories.
–10–
EN
CONNECTIONS - TV, VCR, DIGITAL SET TOP BOX - AND DVD PLAYER
DIGITAL VIDEO
RL
AUDIO OUT
S-VIDEO
VIDEO OUT
AV (TV)
DVD PLAYER
Back of TV
Back of VCR
DIGITAL
SET TOP BOX
Aerial
Satellite dish
Dish Lead
Aerial Lead
SCART Lead
Aerial Lead
Aerial Lead
SCART Lead
SCART Cable
(commercially available)
AV/TERMINAL
(AV-1)
Euro-SCART
(RGB)
Aerial IN
RF
OUT
Aerial IN
Audio/Video
AERIAL IN DISH INTV SCARTRF OUT
AV/TERMINAL
(AV-2)
NOTE
• For further details, refer to the operation manual of your VCR and Digital Set Top Box.
–11–
EN
DVD OPERATION
Basic Playback
CDDVD
Getting started
• Turn on the power of the TV, amplifier and any other components which are connected to the DVD.
• Make sure the TV and audio receiver are set to the correct channel.
• When you play NTSC discs, the NTSC signal will convert
to a modified PAL signal (PAL 60 Hz).
1
Press OPERATE.
•“P-ON” will appear briefly on the display panel.
2
Press OPEN/CLOSE to open disc loading tray.
3
Place the chosen disc in the tray, with the label
facing up.
4
Press PLAY.
• Playback starts automatically.
5
Press STOP to stop playback.
NOTE:
• DVDs may have a region code.Your DVD player will not
play discs with a region code different from 2
(Europe/Japan).
General Features
DVDs may contain menus to navigate the disc and access
special features. Press the appropriate numerical key or use
Arrow ( L / K / B / s ) to highlight your selection in the DVD
menu and press ENTER to confirm.
NOTE:
• Unless stated, all operations described are based on
remote control use. Some operations can be carried
out using the menu bar on the TV screen.
Disc menus
DVD
1
Press MENU.
• The DVD’s main menu will appear.
2
If a title menu is no available, symbol may
appear on the TV screen.
3
If disc menu is available on the disc, audio language, subtitle options, chapters for the title and
other options will appear for selection.
4
Press Arrow ( L / K / B / s ) to select an item, and
ENTER to confirm selection.
Title Menu
DVD
1
Press TITLE.
• The title menu will appear.
2
If a title menu is no available, symbol may
appear on the TV screen.
3
Press Arrow ( L / K / B / s ) to select an item, and
ENTER to confirm selection.
• Playback will begin at the selected Title.
–12–
Pause
1
During playback, press PAUSE.
• Playback will pause and sound will be muted.
2
To continue playback, press PLAY.
CDDVD
EN
DVD OPERATION
Step by Step playback
1
During playback, press PAUSE.
• Playback will pause and sound will be muted.
2
The disc goes forward by one frame each time
PAUSE is pressed.
3
To exit step by step playback, press PLAY.
Resume
1
During playback, press STOP.
• Resume message will appear on the TV screen.
2
Press PLAY, playback will resume from the point
at which playback was stopped.
• To cancel resume, press STOP twice.
Fast Forward / Reverse Search
1
During playback, press ggor hhrepeatedly to
select the required forward or reverse speed: x2,
x8, x30, x60.
2
To return to normal playback, press PLAY.
• Use ggor hhto select the required forward or
reverse at x16 the normal playback speed.
Slow Motion
1
During playback, press PAUSE.
2
Press gg.
• Slow motion playback will begin and sound will be
muted.
3
Press ggrepeatedly to select the required speed:
1/16, 1/8, 1/2 of the normal playback.
4
To return to normal playback, press PLAY.
DVD
CDDVD
DVD
CD
DVD
Zoom
DVD
The Zoom function allows you to enlarge the video image
and to pan through the enlarged image.
1
Press ZOOM during playback.
• Playback will continue.
2
Press ZOOM repeatedly to select the required
zoom factor: x2, x4 or OFF.
3
Use Arrow ( L / K / B / s ) to move the zoomed
picture across the screen.
4
To exit zoom mode, press ZOOM to OFF in the
menu bar.
Track
CD
There are three ways to begin playback on an Audio CD at a
specific Track.
Using the Numerical key pads
1
Press numerical key pad to enter the desired
Track number.
• Playback will start at the selected track.
• For single digit tracks (1-9), press a single number (eg.
track 3, press 3).
• To play track 26, press +10, 2, 6 on the numerical key
pad.
Using the DIRECT SKIP
1
Press DIRECT SKIP.
• The track search display appears.
2
Within 30 seconds, select a desired track number using
numerical key pad.
• Playback will start at the selected track.
Using the SKIP
1
Press SKIP GGto move to the next track.
2
Press SKIP GGor HHrepeatedly to skip subsequent or
to return of the current tracks.
• Track number will appear briefly on the DVD display
panel.
• When playback is paused, pressing SKIP will start the
track playing automatically.
NOTE:
• SKIP H G are not available when playback is
stopped.
HH GG
–13–
EN
DVD OPERATION
Title/chapter
DVD
1
Press DIRECT SKIP to display the Title/Chapter
Search on the TV screen.
2
Enter the desired title/chapter number using
numerical key pad.
Time Search
CDDVD
1
During playback, press DIRECT SKIP twice to dis-
play the Time Search on the TV screen.
2
Within 30 seconds, enter a desired disc time using
numerical key pad.
• Playback will start at the specified time.
3
Press CLEAR to erase the incorrect input.
Repeat
• REPEAT are available only during playback.
REPEAT TITLE/CHAPTER
DVD
• To repeat the current chapter, press REPEAT.
REPEAT CHAPTER appears on the TV screen.
• To repeat the current title, press REPEAT a second time.
REPEAT TITLE appears on the TV screen.
• To exit Repeat mode, press REPEAT a third time.
REPEAT OFF appears on the TV screen.
Programme
CD
You may determine the order in which tracks will play.
1
In stop mode, press MODE.
• The programme screen will appear.
PROGRAM TIME 0:00:00 1/1
--
START: PLAY
RANDOM
2
Enter the desired track numbers using numerical
: MODE
DELETE
EXIT
: CLEAR
: RETURN
key pad.
3
Press PLAY to play the programmed tracks.
Random Playback
CD
This shuffles the playing order of tracks instead of playback
in the sequence.
1
In stop mode, press MODE twice.
• RANDOM screen appears.
2
Press PLAY to start random playback.
REPEAT TRACK
CD
• To repeat the current track, press REPEAT.
REPEAT TRACK appears on the TV screen.
• To repeat the entire disc, press REPEAT a second time.
REPEAT ALL appears on the TV screen.
• To exit Repeat mode, press REPEAT a third time.
REPEAT OFF appears on the TV screen.
REPEAT A-B
CDDVD
1
Press Repeat A-B at your chosen starting point.
• REPEAT A- appears briefly on the TV screen, and the TV
screen.
2
Press Repeat A-B again at your chosen end point.
• REPEAT A-B appears briefly on the TV screen, and the
repeat sequence begins.
3
To exit the sequence, press Repeat A-B.
–14–
EN
DVD OPERATION
MP3 Playback
MP3
When a CD with MP3 files in the DVD player, the MP3 menu
will appear on the TV screen.
1
In stop mode, press K or L to select the desired
Album or Track.
• To play a choosen track, press PLAY or ENTER.
• To play a choosen album, press K or L to select the
desired track,then press PLAY or ENTER.
• Choose FIRST PLAY to start playback from the beginning of the listed tracks.
• Press TITLE to return to the first item.
2
Press STOP to stop playback.
NOTE:
• Folders are known as Albums; files are known as Tracks.
ON SCREEN Information
MP3
You can check the MP3 files during playback.
1
Press ON SCREEN.
• The playing track will be highlighted.
2
Press ON SCREEN again to show the elapsed
playing time appear at the top of the display.
• will be displayed when the repeat play has been
selected.
T - indicates Track repeat
A - indicates Album (folder) repeat
D - indicates Disc repeat
3
Press ON SCREEN again to exit.
Track Selection
MP3
1
Press DIRECT SKIP during playback.
• The SEARCH menu will appear.
• The current track will be highlighted.
Random Playback
MP3
1
Press MODE twice during playback is stopped.
2
Press PLAY to play the tracks in random order.
Programmed
MP3
1
Press MODE during playback is stopped.
2
Press PLAY to play the tracks in random order.
3
Press K or L to select a track, then press ENTER.
• Press CLEAR to erase the incorrect input.
PROGRAM - ALBUM01
+ALBUM11
+ALBUM12
TRACK11
TRACK12
TRACK13
START
: PLAY DELETE: CLEAR
RANDOM: MODE
4
Press PLAY to start programmed playback.
TRACK11
1/11 1/1
EXIT
: RETURN
Audio Language
DVD
The DVD player allows you to select a language during DVD
disc (if multi language available) playback.
1
Press AUDIO during playback.
2
Press AUDIO repeatedly to select your desired
language.
NOTE:
• When a DVD disc with MPEG 5.1CH Audio is
played back, MPEG 6.0CH might appear instead of
MPEG 5.1CH on the screen.
2
Press K or L to select a desired track.
ALBUM NAME
+ALBUM01
TRACK11
TRACK12
TRACK13
TRACK14
SELECT: /ENTER:
RETURN:
3
Press PLAY to start playing
4
Press RETURN or DIRECT SKIP to exit.
1/15
START: PLAY
Stereo L/R playback
1
Press AUDIO repeatedly during playback to select
between AUDIO STEREO, AUDIO L-CH or AUDIO
R-CH.
AUDIO STEREO - both right and left channels are active
(stereo)
AUDIO L-CH - only left channel is active
AUDIO R-CH - only right channel is active
–15–
CD
EN
DVD OPERATION
Subtitle language / switch off
DVD
The DVD player allows you to select a language for subtitle
during DVD disc (if available) playback.
1
Press SUBTITLE during playback.
2
Press SUBTITLE repeatedly to select your desired
subtitle language.
• The available languages appears on the right of the
subtitle display.
3
To turn off subtitles, press s / B or SUBTITLE
repeated until OFF appears.
Camera Angle
DVD
Some DVD discs contain scenes which have been shot
simultaneously from various angles.
1
Press ANGLE during playback.
2
Press ANGLE repeatedly to select your desired
different angle appears on the right of the angle
display.
Parental control / Password
DVD
Password
Parental Control limits the disc viewing that exceed your settings with a password or playback will stop.
The ‘Parental Control’ feature allows you to prevent discs
from being played by your children or to have certain discs
played with alternative scenes.
1
Press SETUP during playback is stopped.
SET-UP
1.
LANGUAGE
2.
DISPLAY
3.
AUDIO
4.
PARENTAL
SELECT:
/ SET
EXIT
: SETUP
2
Press K or L to select PARENTAL, then press
ENTER.
SET-UP
PARENTAL CONTROLS
PASSWORD
Please enter a 4-digit password.
- - - -
EXIT
: SETUP
: ENTER
CANCEL
CANCEL
: RETURN
: RETURN
Changing the On-Screen-Display
DVD
You can check information about the current disc by pressing
the ON SCREEN on the remote control.
1
Press ON SCREEN during playback to show cur-
rent Chapter.
• The elapsed and remaining playing time of the current
chapter will be displayed.
2
Press ON SCREEN again to show current Title.
• The elapsed and remaining playing time of the current
title will be displayed.
3
Press ON SCREEN the third time.
• The BIT RATE, layer number (if available) and the current repeat setting will be displayed.
4
Press ON SCREEN the fourth time to remove the
display.
CD
1
Press ON SCREEN during playback, the current
Track will be displayed on the TV screen.
• The elapsed and remaining playing time of the current
title will be displayed.
2
Press ON SCREEN again to show current Total
Tr ac k .
• The elapsed and remaining playing time of the current
total track will be displayed.
3
Press ON SCREEN the third time to remove the
display.
3
Enter your four-digit password.
• If for the first time, enter any four digits, then press
ENTER.
• To change the password, press K or L to select
CHANGE, then press ENTER. Enter the four-digit password, then press ENTER.
4
Press SETUP to exit.
IF YOU FORGET THE PASSWORD
1
Press SETUP during playback is stopped.
2
Press K or L to select PARENTAL, then press
ENTER.
3
Enter the 4, 7, 3, 7.
• Password will be cleared and parental level will be set
ALL.
4
Press SETUP to exit.
–16–
EN
DVD OPERATION
Parental Level
DVD
Parental Level allows you to set the rating level of your DVD
discs. Playback will stop if the disc’s ratings exceed the level
you set.
1
Press SETUP during playback is stopped.
2
Press K or L to select PARENTAL, then press
ENTER.
3
Enter your four-digit password.
4
Press K or L to select PARENTAL LEVEL, then
press ENTER.
SET-UP
PARENTAL CONTROLS
1.
PARENTAL LEVEL ALL
2.
CHANGE
SELECT:
/ SET
EXIT
: SETUP
5
Press K or L to select the desired level.
6
Press SETUP to exit.
: ENTER
CANCEL
: RETURN
Marker Setup Screen
CDDVD
Use markers to memorise your favourite places on a disc.
1
Press DIRECT SKIP three times during playback.
• The display screen and Markers will appear on the TV
screen.
2
Press s or B to select 1, 2, 3, 4 or 5 and ensure
that “NOT SET” appears in the display.
3
When reaches the desired point, press ENTER.
• The Title or Track and elapsed playing time will appear
in the TV screen.
4
To return to the Marker later, press DIRECT SKIP
three times during playback and s or B to choose
the desired marker, then press ENTER.
NOTE:
• Opening the disc tray or turning off the power or select
AC at step and press ENTER will erase all Markers.
2
–17–
EN
DVD SETUP
4
3
4
3
16
9
16
9
Audio Setting (digital output only)
Choose the appropriate Audio settings for your music equipment.
NOTE:
• These audio settings are effective only when using a digital connection. Although you may change the settings
from the on-screen display, these audio settings do not
actually affect the sound when using an analogue connection.
1
Press SETUP during playback is stopped.
2
Press K or L to select AUDIO, then press ENTER.
3
Press K or L to choose the below items and press
ENTER repeatedly to turn the setting ON or OFF.
Dynamic Range Control (DRC):
• The default setting is OFF.
• To compress the range of sound volume.
Dolby Digital :
• The default setting is Bitstream.
(Bitstream : Output by Dolby Digital)
(DPCM : Convert the Dolby Digital to D-PCM)
Set to Bitstream when the unit is connected to Dolby
Digital Decoder.
DTS:
• The default setting is OFF.
Set to On when the unit is connected to DTS Decoder.
(On: Output by DTS)
MPEG:
• The default setting is OFF.
(On : Output by MPEG sound)
(OFF: Convert the MPEG to PCM)
Set to On when the unit is connected to MPEG
Decoder.
DOWN SAMPLING:
• The default setting is AUTO.
• Press ENTER, then K or L to select AUTO, 48kHz or
96kHz. Press ENTER again to confirm selection.
• Select 96kHz if the disc was recorded in PCM 96kHz,
otherwise select 48kHz.
4
Press SETUP to exit.
Black Level Setting
Adjust the Black Level Settings to make the black parts of
the picture as bright as you preferred.
Display Setting
You can change certain aspects of the DVD’s display
screens, on-screen messages and the display panel on the
front of the DVD player.
1
Press SETUP during playback is stopped.
2
Press K or L to select DISPLAY, then press
ENTER.
3
Press K or L to select the below items, then press
ENTER.
TV Aspect
Aspect ratio of the
received signal.
• Press K or L for an item selection, then press
ENTER.
• Select 4:3 LETTER BOX for a
black bars appears on the top
and bottom of the screen.
• Select 4:3 PAN & SCAN for a
full height picture with both
sides trimmed.
• Select 16:9 WIDE if a widescreen TV is connected to the
DVD player.
Panel Display
• Press
K or L to select BRIGHT, DIMMER and AUTO,
then press ENTER.
• This adjust the brightness of the display panel with the
factory default BRIGHT.
• When AUTO is selected, the display dims only during
playback.
1
Press MODE during playback.
2
Press ENTER repeatedly to select ON or OFF.
ON: makes the dark parts brighter.
OFF: shows the original picture as recorded.
NOTE:
• Black Level Setting is not available if your TV is set to
receive the RGB signal (see page 8 for more infomation).
Angle Icon
•
Press ENTER repeatedly to turn Angle icon ON or OFF.
• The default setting is ON.
Auto Power Off
Auto Power Off:
• Press ENTER repeatedly to turn Auto Power ON or
OFF.
• The default setting is ON and it will turn the DVD player
to off automatically after 35 minutes of no use.
4
Press SETUP to exit.
–18–
EN
DVD SETUP
1.
AUDIO ORIGINAL
2.
SUBTITLE OFF
3.
DISC MENU ORIGINAL
4.
PLAYER MENU ENGLISH
SET-UP
EXIT
: SETUP
CANCEL
: RETURN
SELECT:
/ SET
: ENTER
LANGUAGE CONTROLS
Language Setting
Language options are not available is all discs.
1
Press SETUP during playback is stopped.
2
Press K or L to select LANGUAGE, then ENTER
to confirm.
• The setup screen will be displayed.
3
Press K or L to select AUDIO, SUBTITLE, DISC
MENU or PLAYER MENU, then ENTER to confirm.
4
Press K or L to select a setting, then press
ENTER.
• If OTHER is selected in the AUDIO, SUBTITLE or DISC
MENU screen, press four-digit number to enter the
code for the desired language.
• You can only select other languages if its available on
the disc.
5
Press SETUP to exit.
Langua
Abkhazian 4748
Afar 4747
Afrikaans 4752
Albanian 6563
Amharic 4759
Arabic 4764
Armenian 5471
Assamese 4765
Aymara 4771
Azerbaijani 4772
Bashkir 4847
Basque 5167
Bengali;Bangla 4860
Bhutani 5072
Bihari 4854
Bislama 4855
Breton 4864
Bulgarian 4853
Burmese 5971
Byelorussian 4851
Cambodian 5759
Catalan 4947
Chinese [CHI] 7254
Corsican 4961
Croatian 5464
Czech 4965
Danish [DAN] 5047
Dutch [DUT] 6058
English [ENG] 5160
Esperanto 5161
Estonian 5166
Faroese 5261
Fiji 5256
Finnish [FIN] 5255
ge Code Language Code Language Code Language Code
A-B
C-E
F-H
French [FRE] 5264
Frisian 5271
Galician 5358
Georgian 5747
German [GER] 5051
Greek [GRE] 5158
Greenlandic 5758
Guarani 5360
Gujarati 5367
Hausa 5447
Hebrew 5569
Hindi 5455
Hungarian [HUN] 5467
I-K
Icelandic [ICE] 5565
Indonesian 5560
Interlingua 5547
Interlingue 5551
Inupiak 5557
Irish [IRI] 5347
Italian [ITA] 5566
Japanese [JPN] 5647
Javanese 5669
Kannada 5760
Kashmiri 5765
Kazakh 5757
Kinyarwanda 6469
Kirghiz 5771
Kirundi 6460
Korean [KOR] 5761
Kurdish 5767
L-N
Laothian 5861
Latin 5847
Latvian;Lettish 5868
Lingala 5860
Lithuanian 5866
Macedonian 5957
Malagasy 5953
Malay 5965
Malayalam 5958
Maltese 5966
Maori 5955
Marathi 5964
Moldavian 5961
Mongolian 5960
Nauru 6047
Nepali 6051
Norwegian [NOR] 6061
O-R
Occitan 6149
Oriya 6164
Oromo(Afan) 6159
Panjabi 6247
Pashto;Pushto 6265
Persian 5247
Polish 6258
Portuguese [POR] 6266
Quechua 6367
Rhaeto-Romance 6459
Romanian [RUM] 6461
Russian [RUS] 6467
S
Samoan 6559
Sangho 6553
Sanskrit 6547
Scots Gaelic 5350
Serbian 6564
Serbo-Croatian 6554
Sesotho 6566
Setswana 6660
Shona 6560
Sindhi 6550
Singhalese 6555
Siswat 6565
Slovak 6557
Slovenian 6558
Somali 6561
Spanish [SPA] 5165
Sundanese 6567
Swahili 6569
Swedish [SWE] 6568
Tagalog 6658
Tajik 6653
Tamil 6647
Tatar 6666
Telugu 6651
Thai 6654
Tibetan 4861
Tigrinya 6655
Tonga 6661
Tsonga 6665
Turkish [TUR] 6664
Turkmen 6657
Twi 6669
U-Z
Ukrainian 6757
Urdu 6764
Uzbek 6772
Vietnamese 6855
Volapuk 6861
Welsh 4971
Wolof 6961
Xhosa 7054
Yiddish 5655
Yoruba 7161
Zulu 7267
If you choose a Language that has a 3 letter language code, the code will be displayed everytime you change
the Audio or Subtitle language setting on pages 15 and 16. If you choose any other languages, ‘---’ will be displayed instead. (3 letter language code is written in bracket.)
–19–
T
EN
TROUBLESHOOTING
WARNING
Under no circumstances should you try to repair the system yourself, as this will invalidate the warranty. Do not open the
system as there is a risk of electric shock.
If a fault occurs, first check the points listed below before taking the system for repair.
Problem Solution
No power –Check if the AC power cord is properly connected.
No picture –Check if the TV is switched on.
–Check the video connection
Distorted picture –Sometimes a small amount of picture distortion may appear .This is
not a malfunction.
Completely distorted picture or –Connect DVD player directly to the TV.
black/white picture with DVD –Make sure the disc is compatible with the DVD player.
No sound or distorted sound –Adjust the volume.
–Check that the speakers are connected correctly.
No audio at digital output –Check the digital connections.
–Check if the audio format of the selected audio language matches
your receiver capabilities.
No DTS audio at analog output –Use a DIGITAL AUDIO OUT jack when outputting the DTS audio.
No sound and picture –Check that the SCART cable is connected to the correct device
(See Connecting to a TV)
Picture freezes momentarily –Check the disc for fingerprints/scratches and
during playback clean with a soft cloth wiping from centre to edge.
Disc can’t be played –Ensure the disc label is facing up.
–Check if the disc is defective by trying another disc.
The device cannot playback a Video CD or S-Video CD.
No return to start-up screen when –Reset the player by switching the player off, then on
disc is removed again.
The player does not respond to –Aim the remote control directly at the sensor on
the remote control the front of the player.
–Reduce the distance to the player.
–Replace the batteries in the remote control.
–Re-insert the batteries with their polarities (+/– signs) as indicated.
If no solution, please contact an authorized service centre.
Buttons do not work or player stops –To completely reset the player, unplug the AC
responding cord from the AC outlet for 5-10 seconds.
Then plug in the AC cord again.
Player does not respond to some –Operations may not be permitted by the disc.
operating commands during playback. Refer to the instructions of the disc.
DVD player cannot read –Use a commonly available cleaning CD/DVD to
CDs/DVDs clean the lens before sending the DVD player for repair.
If you are unable to remedy a problem by following these hints, consult your dealer or service centre.
–20–
EN
SPECIFICATIONS
PRODUCT TYPE
DVD Player
DISCS (PLAYBACK COMPATIBILITY)
DVD Video (Region code 2, Europe/Japan)
Audio CD
CD-R
CD-RW
OUTPUT SIGNAL FORMAT
PAL B/G colour
FREQUENCY RESPONSE
DVD (linear sound) : 20 Hz to 20 kHz (sample rate: 48 kHz)
20 Hz to 44 kHz (sample rate: 96 kHz)
CD : 20 Hz to 20 kHz
SIGNAL-TO-NOISE RATIO (S/N RATIO)
CD : 110 dB (JEITA)
DYNAMIC RANGE
DVD (linear sound) : 95 dB
CD : 94 dB (JEITA)
TOTAL DISTORTION FACTOR
CD : 0.005% (JEITA)
WOW AND FLUTTER
Below the measurement limitation (+/-0.001% W PEAK)
(JEITA)
CONNECTIONS
AUDIO/VIDEO 21 pin scart socket x 1
Video output x 1
S-Video output S-Video Output
Analog audio output RCA pin L/R
2 Vrms (47 kilo-ohm)
Coaxial digital audio output RCA pin jack, 500 mVp-p
(75 Ohms)
POWER SOURCE
220-240 V ~ +/- 10%, 50 Hz +/- 0.5%
POWER CONSUMPTION
14 W (standby: 2.8W)
OPERATING TEMPERATURE
5°C to 40°C
DIMENSIONS
W 435mm
H 75mm
D 211mm
WEIGHT
Approx 2.1kg
• Designs and specifications are subject to change
without notice.
MAINTENANCE
Cleaning the Cabinet
• Use a soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing alcohol, spirits,
ammonia or abrasives.
Cleaning Discs
• When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the centre out. Do not wipe in a circular
motion.
• Do not use solvents such as benzine, thinner, commercially available cleaners, etc.
Cleaning the disc lens
• After extended use, dirt and dust may collect at the laser lens. In order to obtain a good playback quality you should
have the unit cleaned by an authorized Sharp service station. Information for Germany you can find at www.sharp.de
Make your contribution to the environment!!!
• Spent batteries do not belong in the dustbin.
• You can dispose of them at a collection point for spent batteries or special waste.
Contact your council for details.
–21–
EN
SHARP CORPORATION
Osaka, Japan
0VMN03268A
E56H3SD ★★★★
Loading...