Date: Mar. 19, 1997
DUPLICATOR : SD-2260
No. : DTE-282
1.MEASURE TO IMPROVE PROBLEMS OF CRACKING OF THE
COUPLING IN THE FUSING DRIVE SECTION.
2.MEASURE TO IMPROVE PROBLEMS OF CRACKING OF THE
COUPLING IN THE MAIN MOTOR UNIT .
1. Measure to improve problems of cracking of the coupling in the fusing drive section.
1.Model Name: SD-2260
2.General: Some changes have been carried out in the assembly of the fusing drive section.
These changes have been carried out as a measure to prevent problems of cracking of
the drive coupling between the fusing drive section and the suction section. Previously
a single holding pin and an E type ring were used, but this has been changed and now
2 straight pins are being used. In accordance with these changes the coupling and the
spring have also been changed.
3.Description: Revolution drive joint clutch PCLC-0190FCZZ →NCPL-0029FCZZ
CL holding pin LPINS0268FCZZ →Discontinued
E type ring (E2) XRESP20-03000 →Discontinued
DV drive spring MSPRC1534FCZ1 →MSPRC2590FCZZ
Straight pin LPINS0096FCZZ →Added two pins (Q’ty: 4 → 6)
CL holding pin ø3
DV drive SP
E2
All of the parts described above should be replaced when carrying out replacement
operations after the change has been carried out.
4.Action: From the start of 1997 March production.
Suction drive joint shaft SP
3 × 12 Straight pins
Suction joint couplingRevolution drive joint clutch
NewOld
SHARP CORPORATION Reprography Division
1/3
Green
C
2. Measure to improve problems of cracking of the coupling in the main motor unit.
1.Model Name: SD-2060/3062
2.General: Some changes have been carried out in the drive coupling which lies between the main
motor unit and the suction section. These changes have been carried out as a measure
to prevent problems of the drive coupling. The changes which have been carried out
are described below.
3.Description: Revolution drive joint clutch PCLC-0190FCZZ →NCPL-0029FCZZ
CL holding pin LPINS0268FCZZ →Discontinued
E type ring (E2) XRESP20-03000 →Discontinued
DV drive spring MSPRC1534FCZ1 →MSPRC2590FCZZ
Straight pin LPINS0096FCZZ →Added two pins (Q’ty: 3 → 5)
Suction drive joint shaft NSFTZ1885FCZ1 →NSFTZ1885FCZ2
Clutch spacer PSPAZ0095FCZZ →Discontinued
CL holding pin ø3
DV drive SP
Clutch spacer
E2
Revolution drive joint clutch
Old
Suction drive joint shaft
All of the parts described above should be replaced when carrying out replacement
operations after the change has been carried out.
4.Action: From the start of 1997 May production.
3 × 12 Straight pins
Suction drive joint shaft SP
Suction joint coupling
New
2/3
Ref.
No.
Model
name
Version P/G No.
Current parts New parts
Parts code Parts code
Price
rank
Parts name
Effec-
tive
time
Inter-
change-
ability
Note
24 -25
24 -26 MSPRC1534FCZ1 MSPRC2590FCZZ AE
1 SD-2260
SD-2060
2
SD-3062
<Interchange>
1. Inte rc ha ng ea bl e. 4. Not i n te rc ha ng ea bl e.
2. Current type can be used in place of new type.
New type cannot be used in place of current type.
3. Current type cannot be used in place of new type.
New type can be used in place of current type.
Parts m a r ked w it h “ ” i s imp or t an t fo r m ai n ta ini ng t he s a fe ty of the s e t. Be s ure t o r ep l ace t he s e pa rts wi th
speci fied ones fo r m ai n ta in i ng t he s a fe ty and pe r fo rma nc e o f th e set.
24 -9 LPINS0096FCZZ Q’ty: 4 → 6 AB Straight pins
24 -24 LPINS0268FCZZ
24 -23 XRESP20-03000 E type ring
27 -15 PCLC-0190FCZZ NCPL-0029FCZZ AD Suction joint coupling
All
27 -16 MSPRC1534FCZZ MSPRC2590FCZZ AE
27 -9 LPINS0096FCZZ Q’ty: 3 → 5 AB Straight pins
27 -19 LPINS0268FCZZ
27 -17 XRESP20-03000 E type ring
27 -12 NSFTZ1885FCZ1 NSFTZ1885FCZ2 AP
27 -15
!
PCLC-0190FCZZ NCPL-0029FCZZ AD Suction joint coupling
Suction drive joint
shaft SP
CL holding pin
Discontinued —
Suction drive joint
shaft SP
CL holding pin
Discontinued —
Suction drive joint
shaft
PSPAZ0095FCZZ Discontinued — Clutch spacer 6
5. Interchangeable if replaced with same types of
related parts in use.
6. Othe rs .
1st lot
’97/3
1st lot
’97/5
3
6
3
6
3
3/3
Loading...