Page 1
Date: Apr. 16, 1996
DUPLICATOR : SD-2075
No. : DTE-227
REGARDING THE ESTABL ISHMENT OF A SET OF P ARTS FOR
CHANGING THE HARNESS FUSING DRAWER CONNECTOR.
1.Model Name: SD-2075/3075/3076
2.General: We are establishing a set of service parts for changing the main harness’s fusing unit
drawing connector.
When changing the drawer connector, the following parts and tools are required.
Fusing harness DHAI-2653FCZZ
°
Extraction tools (tool) UKOG-0251FCZZ
°
Uniting band LBNDJ0013FCZ1 Q’ty: 2
°
Procedure for changing the unit
BLUE
WHITE
BLACK
Changing the unit
➀ Remove the 2 screws for the drawer
connector and the screw for the fuse.
➁ Cut the harness’s uniting band.
➂ Remove the two connectors.
SHARP CORPORATION Reprography Division
1/2
Green
C
Page 2
Fusing harness
DHAI-2653FCZZ
Extraction tools
UKOG-0251FCZZ
BLUE
WHITE
BLACK
Uniting band
LBNDJ0013FCZ1
➃ Use the tool to remove the connector’s signal lines (2-4,
10-14 pin), and insert them in the same pin positions for
the new drawer connector.
➄ Use the three screws removed earlier to set the new
connector in place.
➅ Fix the harness using the uniting band.
➆ Insert the connectors terminals (Note the colors).
Ref.
Model
No.
SD-2075
SD-3075
SD-3076
<Interchange>
1. Interchangeable. 4. Not interchangeable.
2. C urr e nt t y pe c a n be u s ed i n p la ce of new ty pe .
New ty pe cann ot be us ed i n place of curr ent type .
3. C urre nt ty pe cann ot be used i n place of new ty pe.
New t y pe c a n be u sed in p la ce of curr en t ty p e.
Parts marked with “ ” is important for maintaining the safety of the set. Be sure to replace these parts with
specified ones for maintaining the safety and performance of the set.
name
Version P/G No.
All — —
!
Current parts New parts
Parts code Parts code
DHAI-2653FCZZ BB Fusing harness
UKOG-0251FCZZ BA
LBNDJ0013FCZ1 AA Uniting band Q’ty: 2
5. Interchangeable if replaced with same types of
relate d parts in use .
6. Others.
Price
rank
Parts name
Extraction tools
(tool)
Effec-
tive
time
——
Inter-
change-
ability
Note
2/2
Loading...