SHARP DTE275 Technical Report

COPIER(OPTION) : SF-S55

Date

:

May. 27, 1997

No. : DTE-275

MEASURE TO ALLEVIATE PROBLEMS OF JAMS CAUSED
BY OPERATION MISSES OF THE INTERFACE ROD.

1.Model Name: SF-S55

2.General: The changes in software described below have been carried out to alleviate problems of

operation misses of the interface rod in the models listed above.

3.Description: A change has been carried out so that the interface operation can be carried out with the

second load operation after the first multi-load extraction is carried out.

P-ROM Ver. No. 7.20 → 8.10

In accordance with the change in ROM, a change has been carried out in the part code
of the main control PWB, but even in cases of the old PWB, the replacement of the
ROM will result in the equivalent of the new PWB.

4.Action: From the start of 1996 November production.

Ref.

Model

name

Version P/G No.

New type cannot be used in place of current type.

New type can be used in place of current type.

2 -19

14 -901

14 ---- OGZ4F10296080 BD P-ROM [Q4] 6

No.

SF-S55 All

<Interchange>

1. Interchangeable. 4. Not interchangeable.

2. Current type can be used in place of new type.

3. Current type cannot be used in place of new type.

Parts marked with " " is important for maintaining the safety of the set. Be sure to replace these parts with

specified ones for maintaining the safety and performance of the set.

Current parts New parts

Parts code Parts code

OGZ4G10191000 OGZ4G10191030 CK Main control PWB

Price

rank

5. Interchangeable if replaced with same types of
related parts in use.

6. Others.

Parts name

Effec-

tive

time

1st lot
'96/11

Inter-

change-

ability

3

Note

SHARP CORPORATION Reprography Division

Green

C