SHARP DTE270 Technical Report

Date: Mar. 11, 1997
DUPLICATOR : SD-4085
1.MEASURE CARRIED OUT TO ALLEVIATE PROBLEMS OF DAMAGE TO THE RIBS OF THE TRAY UNIT IN THE RDH.
2.ESTABLISHMENT OF PARTS IN THE STAPLER UNIT AS SERVICE PARTS.
3.MEASURE CARRIED OUT TO ALLEVIATE PROBLEMS OF FOLDED CORNERS OF THE COPY PAPER IN THE SDF UNIT.
No. : DTE-270
1. Measure carried out to alleviate problems of damage to the ribs of the tray unit in the RDH.
1.Model Name: SD-4085
2.General: There have been problems of damage to the ribs of the tray unit in the RDH section. As
3.Action: From 1996 mid-December production.
Attachment standard
FE 12 L40
Surface plate of the originally document tray
Use “Semedain #3000" for the attachment.
SHARP CORPORATION Reprography Division
1/4
Green
C
2. Establishment of parts in the stapler unit as service parts.
1.Model Name: SD-F202
2.General: Some of the parts in the stapler unit of the models listed above had not yet been
established as service parts, and have therefore been established and registered as service parts.
NO. Parts name Parts code
1 Face plate øJPEH8ø214/// 2 Driver øJPEH12281/// 3 Forming plate øJPEH12282/// 4 Guide plate øJPEH124ø9/// 5 Drive gear øJPEH12298/// 6 Ratchet lever L øJPEH12311/// 7 Ratchet link øJPEH123ø2/// 8 Mid gear 1 øJPEH123ø3/// 9 Mid gear 2 øJPEH123ø4///
2/4
3. Measure carried out to alleviate problems of folded corners of the copy paper in the SDF unit.
1.Model Name: SD-4085
2.General: There have been problems of folded corners on the original documents in the SDF units
of the models listed above. As a measure to alleviate this problem, a change in the dimensions of paper guide sheet A and paper guide sheet B has been carried out.
Paper guide
69
Paper guide sheet B
Paper guide sheet A
A change has been carried out in the dimension of paper guide sheets A/B in the locations designated by the arrows ( ) in the figure shown above.
Paper guide sheet A 17.5 21.0 Paper guide sheet B 17.5 22.0
3.Action: From the start of 1996 October production.
3/4
Ref.
Model
No.
1 SD-4085
2 SD-F202 62
3 SD-4085
<Interchange>
1. Interchangeable. 4. Not interchangeable.
2. C urr e nt t y pe c a n be u s ed i n p la ce of new ty pe . New ty pe cann ot be us ed i n place of curr ent type .
3. C urre nt ty pe cann ot be used i n place of new ty pe. New t y pe c a n be u sed in pla c e of c u rr en t ty p e.
Parts marked with “ ” is important for maintaining the safety of the set. Be sure to replace these parts with
specified ones for maintaining the safety and performance of the set.
name
Version P/G No.
48 LBSHC0151FCZZ AA Bushing
All
69
!
Current parts New parts
Parts name
Parts code Parts code
øJPEH80214/// AS Face plate øJPEH12281/// øJPEH12282/// Forming plate øJPEH12283/// AH Guide plate øJPEH12298/// AL Drive gear øJPEH12311/// øJPEH12302/// Ratchet link øJPEH12303/// AK Mid gear 1
øJPEH12304/// AH Mid gear 2 øEUSHE0358G// øEUSHE0358GZ1 AH PG sheet A øEUSHE0359G// øEUSHE0359GZ1 AE PG sheet B
Price
rank
Driver
AL
Ratchet lever L
AG
5. Interchangeable if replaced with same types of relate d parts in use .
6. Others.
Effec-
tive
time
Mid-
’96/12
—6
1st lot ’96/10
Inter-
change-
ability
6
3
Note
4/4
Loading...