SHARP DTE265 Technical Report

DUPLICATOR : SD-3062

Date

May. 16, 1997

No. : DTE-265

CHANGE IN PARTS CARRIED OUT IN ACCORDANCE WITH A HALT IN PRODUCTION.

1.Model Name: SD-3062

2.General: A change has been carried out in the IC (ROM) which is used in the main PWB in the

UDH unit. This change has been carried out in accordance with a halt in production. The discontinued IC has been changed to a substitute part.

3.Action: Running change from 1996 mid-August production.

Ref.

Model

No.

SD-3062 All

1. Interchangeable. 4. Not interchangeable.

2. Current type can be used in place of new type.

3. Current type cannot be used in place of new type.

Parts marked with " " is important for maintaining the safety of the set. Be sure to replace these parts with

specified ones for maintaining the safety and performance of the set.

Version P/G No.

name

74 -20

New type cannot be used in place of current type.

New type can be used in place of current type.

Current parts New parts

Parts code Parts code

0EUHI27C256AP 0EUHILH53592S AX ROM(IC802)

Effec-

Price

5. Interchangeable if replaced with same types of related parts in use.

6. Others.

Parts name

rank

tive

time

Mid-

'96/8

Inter-

change-

ability

Note

SHARP CORPORATION Reprography Division

Green