4.Action:From the start of 1996 November production.
SHARP CORPORATIONReprography Division
1/7
Green
C
2. ROM upgrade and changes in the operation manual and key operation guide.
1.Model Name:SD-3062
2.General:Changes have been carried out in the content of the main ROM, the program ROM, the
data ROM and the Finisher ROM. Changes have also been carried out in the main
PWB, the operation PWB, and in the content of the operation manual and the key
operator guide. The changes described above have all been carried out in accordance
with a change that was carried out in the SD-3062 specifications.
Note:Please refer to the attached supplemental page for details concerning the
changes that were carried out in the specifications of the SD-3062.
3.Description: Old New
Main PWB unitCPWBN0983FC53→CPWBN0983FC57
Main ROM unitVHI27C02031FC→VHI27C02046FC
Operation PWB unit
(French)CPWBN0990FC65→CPWBN0990FC70
Program ROM unitVHI27C51269FC→VHI27C512A9FC
Data ROM unit
(Japanese)VHI27C51230FC→VHI27C512A4FC
(German)VHI27C51231FC→VHI27C512A5FC
(English)VHI27C51232FC→VHI27C512A6FC
(Spanish)VHI27C51233FC→VHI27C512A7FC
(French)VHI27C51234FC→VHI27C512A8FC
Finisher ROM unitVHI27C25603FC→VHI27C25606FC
Operation manual
(Japanese)TINSJ1114FCZZ→TINSJ1114FCZ1
(SEC)TINSE1115FCZZ→TINSE1115FCZ1
(Standard English) TINSE1117FCZZ→TINSE1117FCZ1
(German)TINSG1118FCZZ→TINSG1118FCZ1
(French)TINSF1119FCZZ→TINSF1119FCZ1
(Italian)TINSI1120FCZZ→TINSI1120FCZ1
(Spanish)TINSS1121FCZZ→TINSS1121FCZ1
(Arabic)TINSZ1122FCZZ→TINSZ1122FCZ1
(Dutch)TINSH1123FCZZ→TINSH1123FCZ1
2/7
Old New
Key operator guide
(Ja p a n e s e dome s t i c )TINSJ1 124FCZZ→TINSJ1124FCZ1
(SEC)TINSE1125FCZZ→TINSE1125F CZ1
(SUK)TINSE1126FCZZ→TINSE1126F CZ1
(Stand ard E nglish) TINSE1127FCZZ→TINSE1127FCZ1
(German)TINSG1128FCZZ→TINSG1128FCZ1
(French)TINSF1129FCZZ→TINSF1129FCZ1
(Italian)TINSI1130FCZZ→TINSI1130FCZ1
(Spanish)TINSS1131FCZZ→TINSS1131FCZ1
(Arabic)TINSZ1132FCZZ→TINSZ1132FCZ1
(Dutch)TINSH1133FCZZ→TINSH1133FCZ1
ROM Version
Main ROM:V 4.07→V 5.00
Program ROM:V 4.02→V 5.00
Data ROM:V 4.00→V 5.00
Finisher ROM:V 3.33→V 3.50
Changes in the Content of the Specifications.
• On p. 24 of the key operator ’s manual, the number of fixed magnifications which can
be set has been changed to only one. Moreover, it is possible to add three fixed
magnifications using sim. 26-28.
• The range of magnification change which is possible using the zoom key has been
changed to lie within the intervals of the fixed magnification (100%, including the added
fixed magnifications described above).
• The magnification message which is displayed when the fixed magnification key is
depressed is not deleted when the zoom key is ON.
• The ready lamp is illuminated when the extra size parameter is set during the double
side copy mode. When the copy operations are started, S → D mode is changed to S
→ S mode, and D → D mode is changed to D → S mode before copies are made.
• When the reset operation is carried out on the finisher, the second final edge
detection is set as the home position.
• A change has been carried out in the operation guidance method. (The key ON
explanation has been changed to an explanation using the ten key pad selection.
• Multi-copies during SDF mode/stable has been enabled. (The OC mode automatically
changes to “1" as before.)
• During interrupt copy operations, the RDH original copy which was set before the
interrupt key is depressed continues until the OC is opened, or until the original copy is
changed.
• Interrupt copy operations have been prohibited during staple copy mode operations,
and during SDF copy mode operations. Interrupt copy operations are immediately
halted during double sided RDH copy mode operations until one copy has been
completed for the single side RDH copy mode operations
4.Action:From the start of 1996 October production.
3/7
3. Change in the screws of the C16 middle tray.
1.Model Name:SD-2060/3062
2.General:There was a danger of operation malfunction in the C16 center tray unit due to
interference of the guide by the heads of the screws which secure the fixed lower PG.
As a correction measure to alleviate this problem, the fixing screws have been changed
to flat-head screws.
3.Description:Fixed lower PG front unit (Discontinued)M4 x 5 SW(XBPSD40P05K00)
(Added)Flat-head screw(LX-BZ0465FCZZ)
Fixed lower PG rear unit (Discontinued)M4 x 5 SW(XBPSD40P05K00)
(Added)Flat-head screw(LX-BZ0465FCZZ)
Fixed lower PG F/R
Ejection guide
With M4 x 5 SW
The screw interferes
with the ejection guide.
Changed screw
Fixed lower PG F/R
Ejection guide
M4 x 6 flat-head screw
4.Action:From the start of 1996 November production.
With M4 x 5 SW
(XBPSD40P05K00)
(8 screws are used)
M4 x 6 flat-head screws
(LX-BZ0465FCZZ)
Changed
screw
4/7
4. Measure to prevent folded corners of the copy paper.
1.Model Name:SD-2060/3062
2.General:A sheet has been added as a measure to prevent the corners of the upper curl
A4-R/LTR copy paper in the models listed above from becoming caught on the paper
guide FB and the vertical rollers immediately after the copy paper passes through the
upper heat rollers. (This measure has already been carried out on the fusing units of
the SD-2260 machines).
3.Description:Paper guide FB unit:
(Added)Post-fusing sheet FPSHEP4350FCZZQ’ty:0 → 1
Post-fusing sheet RPSHEP4351FCZZQ ’ty:0 → 1
• Attached
R side
P guide FB
Hole
Hole
F side
Direction of copy paper flow.
Hole
Post-fusing sheet F
4.Action:From 1996 mid-October production.
Hole
Sheet
Note: Post-fusing sheet R is opposite Post-fusing sheet F.
Note: Wipe surfaces with alcohol before attaching.
5/7
Ref.
No.
1
Model
name
SD-2060
SD-3062
Version P/G No.
21 -10LSOU-0110FCZ2LSOU-0110FCZ3AX2000 Tray
All
8 -60
Current partsNew parts
Parts codeParts code
CPWBN0983FC53 CPWBN0983FC57 CE Main PWB UN
Price
rank
Parts name
Effec-
tive
time
1st lot
’96/11
Inter-
change-
ability
1
6
Note
2 SD-3062
77 -80
German
EnglishCPWBN0990FC63 CPWBN0990FC68 BZ
SpanishCPWBN0990FC64 CPWBN0990FC69
FrenchCPWBN0990FC65 CPWBN0990FC70
German
EnglishVHI27C51232FCVHI27C512A6FC
SpanishVHI27C51233FCVHI27C512A7FC AW
FrenchVHI27C51234FCVHI27C512A8FC
SEC
Standard
English
FrenchTINSF1119FCZZTINSF1119FCZ1
ItalianTINSI1120FCZZTINSI1120FCZ1
SpanishTINSS1121FCZZTINSS1121FCZ1
ArabicTINSZ1122FCZZTINSZ1122FCZ1BT
DutchTINSH1123FCZZTINSH1123FCZ1BF
SEC
SUKTINSE1126FCZZTINSE1126FCZ1AX
Standard
English
GermanTINSG1128FCZZTINSG1128FCZ1
FrenchTINSF1129FCZZTINSF1129FCZ1
ItalianTINSI1130FCZZTINSI1130FCZ1
2 -21
All
80 -51VHI27C51269FCVHI27C512A9FC AXProgram ROM UN
80 -50
56 -52VHI27C25603FCVHI27C25606FCFinisher ROM UN
All
86 -36
86 -37
VHI27C02031FCVHI27C02046FCBA Main ROM UN5a
CPWBN0990FC62 CPWBN0990FC67 CA
VHI27C51231FCVHI27C512A5FC
TINSE1115FCZZTINSE1115FCZ1AY
TINSG1117FCZZTINSG1117FCZ1
TINSE1125FCZZTINSE1125FCZ1AR
TINSE1127FCZZTINSE1127FCZ1AV
Operation PWB UN
(German)
Operation PWB UN
(English)
Operation PWB UN
(Spanish)
CA
Operation PWB UN
(French)
Data ROM UN
(German)
AY
Data ROM UN
(English)
Data ROM UN
(Spanish)
Data ROM UN
(French)
AX
Operation manual
(SEC)
Operation manual
(Standard English)
Operation manual
(French)
BF
Operation manual
(Italian)
Operation manual
(Spanish)
Operation manual
(Arabic)
Operation manual
(Dutch)
Key operator guide
(SEC)
Key operator guide
(SUK)
Key operator guide
(Standard English)
Key operator guide
(German)
Key operator guide
BA
(French)
Key operator guide
(Italian)
6
1st lot
’96/10
5
6/7
Ref.
Model
No.
name
2 SD-3062
Current partsNew parts
Version P/G No.
Spanish
ArabicTINSZ1132FCZZTINSZ1132FCZ1BK
DutchTINSH1133FCZZTINSH1133FCZ1 BA
86 -37
Parts codeParts code
TINSS1131FCZZTINSS1131FCZ1BA
Price
rank
Key operator guide
(Spanish)
Key operator guide
(Arabic)
Key operator guide
(Dutch)
Parts name
Effec-
tive
time
1st lot
’96/10
Inter-
change-
ability
5
Note
3
SD-2060
SD-3062
4
<Interchange>
1. Interc ha ng ea bl e.4. N ot i n te r cha ng ea bl e.
2. Current type can be used in place of new type.
New type cannot be used in place of current type.
3. Current type cannot be used in place of new type.
New type can be used in place of current type.
Parts m a r ked w it h “ ” i s imp or t an t fo r m ai n ta ini ng t he s a fe ty of the se t. B e s ure t o r ep lac e t he se parts with
speci fied ones for main ta in ing the safe ty an d pe r fo r ma nce of the s et .
31 -44XBPSD40P05K00LX-BZ0465FCZZAA Screw
All
12—
!
PSHEP4350FCZZ
PSHEP4351FCZZPost-fusing sheet R
5. Interchangeable if replaced with same types of
6. Others.
Post-fusing sheet F
AD
related parts in use.
1st lot
’96/11
’96/10
Mid-
3
6
7/7
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.