SHARP DTE253 Technical Report

Date: Nov. 12, 1996

COPIER : SD-2060

No. : DTE-253

CHANGES AND ADDITIONS OF PARTS IN THE FUSING UNIT.

1.Model Name: SD-2060/3062

2.General: Changes and additions have been carried out on some of the parts in the fusing unit.

These changes and additions have been carried out for the following reasons.

3.Description: ➀ A change has been carried out in the shape of the front and rear frame in the fusing unit. This change has been carried out as a measure to establish interchangeability with model SD-2260.

➁ The edge saddle has been changed to a larger one. This change has been carried

out as a measure to improve operationability during the harness finishing process.

➂ A plate spring retaining plate has been added as a measure to distinguish the fusing

unit in the models above from the fusing unit in model SD-2260.

4.Action: From the start of 1996 July production.

Ref.

Model

No.

➀

SD-2060

➁

SD-3062

➂

1. Interchangeable. 4. Not interchangeable.

2. C urr e nt t y pe c a n be u s ed i n p lac e of n ew type . New ty pe cann ot be us ed i n place of curr ent type .

3. C urre nt ty pe cann ot be used i n place of new ty pe. New t y pe c a n be u sed in p la c e of c u rr en t ty p e.

Parts marked with “ ” is important for maintaining the safety of the set. Be sure to replace these parts with

specified ones for maintaining the safety and performance of the set.

name

Version P/G No.

12 -43 CFRM-0766FC02 CFRM-0766FC03

12 -145

All

12 -19 LHLDW2068SCZZ LHLDW1152FCZZ

12 —

Current parts New parts

rank

Parts name

Fusing frame F

wire holder

Plate spring retaining plate

Parts code Parts code

CFRM-0767FC02 CFRM-0767FC03 Fusing frame R

LPLTM4515FCZZ

XBPSD30P06KS0 AA Screw (M3 x 6) Q’ty: 2

Price

5. Interchangeable if replaced with same types of relate d parts in use .

6. Others .

Effec-

tive

time

1st lot

’96/7

Inter-

change-

ability

Note

SHARP CORPORATION Reprography Division

Green