SHARP DTE252 Technical Report

Date: Nov. 12, 1996

COPIER : SD-2060

No. : DTE-252

ESTABLISHMENT OF INTERCHANGEABILITY OF PARTS.

1.Model Name: SD-2060/2160/3062

2.General: Changes have been carried out on the parts listed below. These changes have been

carried out as a measure to establish interchangeability of the parts with the parts used in model SD-2260.

3.Description: ➀ Change in the length of the screw of the adjuster. ➁ Change in the shape of the 2000 tray cabinet.

4.Action: ➀ From the start of 1996 June production. ➁ From 1996 mid-October production.

Ref.

Model

No.

➀

SD-2060 SD-3062

➁

1. Interchangeable. 4. Not interchangeable.

2. C urr e nt t y pe c a n be u s ed i n p lac e of n ew type . New ty pe cann ot be us ed i n place of curr ent type .

3. C urre nt ty pe cann ot be used i n place of new ty pe. New t y pe c a n be u sed in p la c e of current ty p e.

Parts marked with “ ” is important for maintaining the safety of the set. Be sure to replace these parts with

specified ones for maintaining the safety and performance of the set.

name

Version P/G No.

7 -78

All

22 -32 GCAB-0782FCZ1 GCAB-0782FCZ2 BN 2000 tray

Current parts New parts

Parts code Parts code

PAJS-0011FCZZ PAJS-0011FCZ1 AV Adjuster

5. Interchangeable if replaced with same types of

6. Others.

Price

relate d parts in use .

Parts name

rank

Effec-

tive

time

1st lot

’96/6

Mid-

’96/10

Inter-

change-

ability

Note

SHARP CORPORATION Reprography Division

Green