SHARP DTE250 Technical Report

Date: Nov. 12, 1996

COPIER : SD-2075/3075/3076

1.ST ANDARDI ZATION OF PARTS.

2.A CHANGE IN DELIVER Y UNI T SUPPLI ERS.

3.ST ANDARDI ZATION OF THE 1ST AUTO CLEANING UNIT.

4.A CHANGE TO THE CLEANER BRAID MATERIALS

No. : DTE-250

1. Standardization of parts.

1.Model Name: SD-2075/3075/3076

2.General: We have made the following changes so that the upper exterior rear fixing plate R

(LPL TM3430F CZZ) and blade holder AS (CHLDZ1052FC02) are the same for the
models listed above as for the SD-4085.

3.Description: (Old) LPLT M 3430FCZZ CHLDZ1052FC02

↓↓

(New) LPLT M 3430FCZ1 CHLDZ1052FC03

Changed to

LPLTM3430FCZZ

Blade holder AS
(CHLDZ1052FC02)

Changed to

Added ø20 opening

LPLTM3430FCZ1

Blade holder AS (CHLDZ1052FC03)

Added two notches

4.Action: From June 1996 production on.

SHARP CORPORATION Reprography Division

Added 2 ø6 openings

1/3

Green

C

2. A change in delivery unit suppliers.

1.Model Name: SD-3075/3076

2.General: We have changed delivery unit suppliers. We have also changed the part code for the

delivery unit as a result.

3.Description: (Old) DUNTM6335FCZZ

↓

(New) DUNTM6847FCZZ

4.Action: From June 1996 production on.

3. Standardization of the 1st auto cleaning unit.

1.Model Name: SD-2075/3075/3076

2.General: We have made the following changes so that the 1st auto cleaning unit is the same for

the models listed above as for the SD-4085.

3.Description: (Old) DUNTM6328FC1 1

↓

(New) DUNTM6328FC12

Added notch

Mylar

4.Action: From June 1996 production on.

2/3