SHARP DTE246 Technical Report

Date: Nov. 5, 1996

DUPLICATOR : SD-2060

No. : DTE-246

1.MEASURE TO IMPROVE UDH PRODUCTIVITY .

2.CHANGE IN THE NUMBER OF ATTACHMENT SCREWS IN THE PAPER FEEDER DRIVE UNIT.

1. Measure to improve UDH productivity.

1.Model Name: SD-3062

2.General: The connector section of the reflective sensor used in the UDH obstructs, and the

square attachment holes of the sensor are difficult to affix. For these reasons the measure described below has been carried out.

3.Description: A change has been carried out in the tour fixing plate assembly and the regulation plate ass’y unit base.

4.Action: From 1996 mid-August production.

2. Change in the number of attachment screws in the paper feeder drive unit.

1.Model Name: SD-2060/3062

2.General: One of the screws used in the paper feeder drive unit that is used with the models listed

above has been discontinued in accordance with a change in part of the shape which was carried out as a measure to make it possible for the paper feeder drive unit to be used with new models.

Discontinued screw

The shaded portion has been cut

3.Action: From the start of 1996 July production.

SHARP CORPORATION Reprography Division

1/2

Green

Ref.

Model

No.

1 SD-3062

SD-2060

SD-3062

1. Interchangeable. 4. Not interchangeable.

2. C urr e nt t y pe c a n be u s ed i n p la ce of new ty pe . New ty pe cann ot be us ed i n place of curr ent type .

3. C urre nt ty pe cann ot be used i n place of new ty pe. New t y pe c a n be u sed in p lac e of c u r ren t ty p e.

Parts marked with “ ” is important for maintaining the safety of the set. Be sure to replace these parts with

specified ones for maintaining the safety and performance of the set.

name

Version P/G No.

64 -79 0EUANG0311D01 0EUANG0311D02 AR

71 -11 0EUDAI0301D01 0EUDAI0301D02 AZ

All

8-2

Current parts New parts

Parts code Parts code

LX-BZ0689FCZZ

1 location

discontinued

Price

5. Interchangeable if replaced with same types of relate d parts in use .

6. Others.

Parts name

rank

Tour fixing plate ass’y

Regulation plate unit base ass’y

AA Screw

Effec-

tive

time

Mid-

’96/8

1st lot

’96/7

Inter-

change-

ability

Note

2/2