Date: Nov. 5, 1996
DUPLICATOR : SD-2060
1.MEASURE TO ALLEVIATE PROBLEMS OF JAMS WITH SOME TYPES OF PAPER.
2.MEASURE TO ALLEVIATE PROBLEMS OF DAMAGE TO THE DV COVER.
3.MEASURE TO ALLEVIATE PROBLEMS OF BREAKING OF THE LIFT ANGLE IN THE
CENTER TRAY UNIT.
No. : DTE-244
1. Measure to alleviate problems of jams with some types of paper.
1.Model Name: SD-2060/3062
2.General: Some problems have occurred in the Japanese domestic market with paper jams when
using dust-free paper. To alleviate these problems the measures described below have
been carried out.
➀ A fusing front sheet (PSHEP4127FCZZ) has been added (2 locations) to the fusing
front guide (PGIDH1482FCZZ) in the fusing unit.
Added fusing front sheet (PSHEP4127FCZZ)
Fusing front guide
(PGIDH1482FCZZ)
<Attachment standard>
Standard
+1
0
0
Double sides tape standard
0
-1
5
Fusing front sheet
(PSHEP4127FCZZ)
Fusing front guide
(PHIDH1482FCZZ)
SHARP CORPORATION Reprography Division
1/5
Green
C
➁ A roller guide sheet (PSHEP4126FCZZ) has been added to the movement upper
paper guide (PGIDM1413FCZZ) in the center tray unit.
Movement upper paper guide
(PGIDM1413FCZZ)
Added roller guide sheet
(PSHEP4126FCZZ)
<Attachment standard>
Standard
+0.5
0
0
Standard
+0.5
0
0
3.Action: From 1996 mid-March production.
Roller guide sheet
(PSHEP4127FCZZ)
Movement upper paper guide
(PGIDM1413FCZZ)
Movement side upper roller
2/5
2. Measure to alleviate problems of damage to the DV cover.
1.Model Name: SD-2060/3062
2.General: The DV cover is sometimes damaged (cuts and scratches) by the DV stopper. To
alleviate this problem a DVSTP sheet has been attached to the DV stopper.
DV Stopper
(LSTPF0288FCZ1)
<Attachment standard>
DV Stopper
(LSTPF0288FCZ1)
Added DVSTP sheet
(PSHEP4223FCZZ)
3.Action: From 1996 April production.
Y
-0.5~0
X
0
Attachment standard
(X direcition)
Should not protrude beyond
the R edge surface
±0.5
Attachment standard
(Y direcition)
3/5
3. Measure to alleviate problems of breaking of the lift angle in the center tray unit.
1.Model Name: SD-2060/3062
2.General: Because the reset handle in the center tray unit is quite loose, a heavy shock load is
placed on the lift angle (LANGT1368FCZZ) in the center tray unit, sometimes causing
problems such as breaking of the lift angle or bending of the straight pin. T o alleviate
this problem the looseness of the reset handle has been remedied by carrying out the
measures described below, which will alleviate the shock load that is placed on the lift
angle.
30
Center tray unit
Added handle SP
(MSPRT2088FCZ1)
Lift lock shaft (NSFTZ1978FCZZ changed to NSFTZ1978FCZ1)
31
-Center tray unit
Discontinued handle SP
(MSPRT2088FCZZ)
Lift slide plate F
(LPLTM4425FCZZ
changed to
LPLTM5303FCZZ)
∗ Should damage occurs to parts, part replacement procedures should be carried out
as described below.
➀ When the handle SP is damaged:
Replace only the handle SP.
➁ When the lift lock shaft and the lift slide plate F are damaged:
All three parts (handle SP, lift lock shaft, and lift slide plate F)
should be replaced with new parts.
3.Action: From 1996 August production.
4/5
Ref.
Model
No.
1
SD-2060
2
SD-3062
3
<Interchange>
1. Interchangeable. 4. Not interchangeable.
2. C urr e nt t y pe c a n be u s ed i n p la ce of new t y pe .
New ty pe cann ot be us ed i n place of curr ent type .
3. C urre nt ty pe cann ot be used i n place of new ty pe.
New t y pe c a n be u sed in p la c e of c u rr en t ty p e.
Parts marked with “ ” is important for maintaining the safety of the set. Be sure to replace these parts with
specified ones for maintaining the safety and performance of the set.
name
Version P/G No.
12
31 PSHEP4126FCZZ AD
10 PSHEP4223FCZZ AB DV STP sheet
All
30 -39 MSPRT2088FCZZ Discontinued —
30 — MSPRT2088FCZ1 AD
30 -34 NSFTZ1978FCZZ NSFTZ1978FCZ1 AW Lift lock shaft
31 -113 LPLTM4425FCZZ LPLTM5303FCZZ AH Lift slide plate F
!
Current parts New parts
Parts code Parts code
PSHEP4127FCZZ AF
—
5. Interchangeable if replaced with same types of
relate d parts in use .
6. Others .
Price
rank
Parts name
Fusing front
sheet
Roller guide
sheet
Handle spring
Effec-
tive
time
Mid-
’96/3
1st lot
’96/4
1st lot
’96/8
Inter-
change-
ability
—
3
Note
2
sheets
added
1
sheet
added
5/5
Loading...