Date: Nov. 5, 1996
DUPLICATOR : SD-2060
1. CHANGE IN THE ROLLER FRAME IN THE FINISHER ELEVATOR FRAME UNIT.
2. ADDITION OF AN IC SOCKET FOR THE EXTERNAL CHARACTER ROM IN THE OPERATION
CONTROL PWB UNIT (ENGLISH).
3. ELIMINATION OF A PAPER TRAY SHEET IN THE CENTER TRAY UNIT AS A MEASURE TO
IMPROVE PRODUCTIVITY.
No. : DTE-241
1. Change in the roller frame in the finisher elevator frame unit.
1.Model Name: SD-3062
2.General: There was a danger of the sensor and the roller frame F in the finisher elevator frame
unit coming in contact with each other. To alleviate this problem the roller frame F has
been changed into one that is divided into two parts.
(Old) Roller frame F CFRM-0781FC01 Q’ty: 1
↓ Changed
(New) Roller frame F CFRM-0781FC02 Q’ty: 1
Sensor light shield plate LPLTM5319FCZZ Q’ty: 1(added)
M3 x 8 XBBSD30P08000 Q’ty: 2(added)
(Assembly procedure)
Changed
Roller frame F
CFRM-0781FC01
∗ When fixing the screws,
the screw lock should be applied.
Roller frame F
CFRM-0781FC02
screw
3.Action: From 1996 August production.
The screw should be driven so that
the sensor light shield plate is
positioned in the center portion of
the sensor detection area.
Sensor light shield plate
LPLTM5319FCZZ
screw
M3 × 8bind
Q'ty: 2
SHARP CORPORATION Reprography Division
1/3
Green
C
2. Addition of an IC socket for the external character ROM in the operation control
PWB unit (English).
1.Model Name: SD-2060 (only for machines bound for SEEG)
2.General: The IC socket for the external character ROM in the operation control PWB unit had
been discontinued as a measure to improve productivity. In accordance with a request
from SEEG, however, the IC socket for the external character ROM has been added.
In addition to this change, the part code for the operation control PWB has also been
changed.
Added IC socket for the external character ROM.
Operation control PWB unit
3.Action: From 1996 August production.
3. Elimination of a paper tray sheet in the center tray unit as a measure to improve
productivity.
1.Model Name: SD-2060/3062
2.General: The paper tray sheet in the center tray unit has been discontinued. This change has
been carried out as a measure to improve production.
Discontinued paper tray
sheet (number: 1).
3.Action: From 1996 August production.
2/3
Ref.
Model
No.
1 SD-3062 All
2 SD-2060 SEEG
SD-2060
3
SD-3062
<Interchange>
1. Interchangeable. 4. Not interchangeable.
2. C urr e nt t y pe c a n be u s ed i n p la ce of new ty pe .
New ty pe cann ot be us ed i n place of curr ent type .
3. C urre nt ty pe cann ot be used i n place of new ty pe.
New t y pe c a n be u sed in p la ce of curr en t ty p e.
Parts marked with “ ” is important for maintaining the safety of the set. Be sure to replace these parts with
specified ones for maintaining the safety and performance of the set.
name
Version P/G No.
51 -32
80 -6 QSOCZ2051SC32 AC IC socket (32pin)
80 -901 CPWBN0990FC53 CPWBN0990FC57 BZ
29 -61 PSHEP3508FCZZ
All
!
Current parts New parts
Parts code Parts code
CFRM-0781FC01 CFRM-0781FC02 AR Roller frame F
LPLTM5319FCZZ AD Sensor light shield plate
—
XBBSD30P08000 AA Screw (M3 x 8)
1 sheet
discontinued
Price
rank
AQ Paper tray sheet ∗
5. Interchangeable if replaced with same types of
relate d parts in use .
6. Others.
Parts name
Operation control PWB
(English)
∗ 1 sheet discontinued.
Effec-
tive
time
1st lot
’96/8
Inter-
change-
ability
3
—
Note
SEEG
only
3/3
Loading...