SHARP DTE238 Technical Report
Date: Oct. 22, 1996
COPIER : SD-4085
1. A CHANGE TO THE WIDTH OF THE TG MYLAR KS TAPE.
2. A CHANGE IN THE ARRANGEMENT OF THE SDF ATTACHMENT PARTS.
3. A CHANGE TO THE DOUBLE-SIDED TAPE FOR THE RDH PAPER PRESSER RIB.
4. A CHANGE TO THE ATTACHMENT SCREWS FOR THE REAR CABINET.
1. A change to the width of the TG mylar KS tape.
1.Model Name: SD-4085
2.General: The shadow of the TG Mylar KS tape occasionally appears on copies. To prevent this,
we have shortened the TG Mylar KS tape by 2 mm.
No. : DTE-238
3.Action: From the first unit of August, 1996 production.
2. A change in the arrangement of the SDF attachment parts.
1.Model Name: SD-4085
2.General: We have changed the arrangement of SDF attachment parts from unit parts to
individual parts.
3.Action: From the middle of November , 1996 production.
3. A change to the double-sided tape for the RDH paper presser rib.
1.Model Name: SD-4085
2.General: The paper presser rib in the RDH unit may come out of position, causing problems in
paper transport. T o prevent this, we have made the changes described below.
Green
C
SHARP CORPORATION Reprography Division
1/2
3.Description: We have changed the double-sided tape used to attach the paper presser rib to
improve adhesion.
Paper presser rib
Rear paper guide
51 -22
Cutaway portion
4.Action: From the middle of June, 1996 production.
4. A change to the attachment screws for the rear cabinet.
1.Model Name: SD-4085
2.General: We are making the screws that attach the rear cabinet the same as those used to
attach the RDH outer case.
3.Description: We have changed the screws used from M4 x 8 screws to M4 x 10 screws.
4.Action: From the first unit of August, 1996 production.
Ref.
Model
No.
1
2
SD-4085
M7385
3 51 LFIX-0507FCZZ LFIX-0507FCZ1 AK Paper presser rib
4
<Interchange>
1. Interchangeable. 4. Not interchangeable.
2. C urr e nt t y pe c a n be u s ed i n p la ce of new t ype .
New ty pe cann ot be us ed i n place of curr ent type .
3. C urre nt ty pe cann ot be used i n place of new ty pe.
New t y pe c a n be u sed in p la c e of c u rr en t ty p e.
Parts marked with “ ” is important for maintaining the safety of the set. Be sure to replace these parts with
specified ones for maintaining the safety and performance of the set.
name
Version P/G No.
2
66 -5 0EUANG0332G// LPLTM5329FCZZ AZ Hinge fixing plate
All
66 -6 0EUANG0330G// LSTPF0339FCZZ AT Hinge stopper
2 -T8
!
Current parts New parts
Parts code Parts code
PSHEP4310FCZZ PSHEP4310FCZ1 AL TG mylar KS
XBTSE40P08000 XBTSE40P10000 AA Screw (4 x 8)
Price
5. Interchangeable if replaced with same types of
relate d parts in use .
6. Others .
Parts name
rank
Effec-
tive
time
1st lot
’96/8
1st lot
’96/11
Mid-
’96/6
1st lot
’96/8
Inter-
change-
ability
6
1
3
Note
2/2
Loading...