SHARP DTE237 Technical Report

Date: Oct. 22, 1996

COPIER : SD-4085

1.REGARDI NG THE KEYSHEET FOR THE SECL MARKET.

2.THE DISCONTINUATION OF THE RDH STATIC PROTECTION SHEET.

3.THE ADDITION OF AN RDH MOLT.

4.THE ADDITION OF AN RDH OPEN/CLOSE L EVER KNOB.

1. Regarding the keysheet for the SECL market.

1.Model Name: SD-4085 (SECL)

2.General: We have discontinued the key sheet attached to the operation panel of the SD-4085

(SECL version). It is now included with the operation manual unit as the key sheet unit.

No. : DTE-237

3.Action: From the first unit of September, 1996 production.

2. The discontinuation of the RDH static protection sheet.

1.Model Name: SD-4085

2.General: There used to be a static prevention sheet in the RDH connector to prevent problems

with static electricity. Since, however, the connector has a cover , there is no need for
the part and we have discontinued it.

3.Action: From the first unit of September, 1996 production.

SHARP CORPORATION Reprography Division

1/3

Green

C

3. The addition of an RDH molt.

1.Model Name: SD-4085

2.General: A gap may open between the connection portion of the connection duct unit and the

RDH paper intake fan unit. To prevent this, we have taken the steps indicated below.

3.Description: We have attached a paper intake fan molt (B) to the paper intake fan unit.

Base

Paper intake fan attachment board
(LPLTP5200FCZZ)

Base

Square hole

Paper intake fan solenoid attachment board
(LPLTP5198FCZZ)

43 -2

Paper intake fan molt B

43 -14

4.Action: From the middle of June, 1996 production.

4. The addition of an RDH open/close lever knob.

1.Model Name: SD-4085

2.General: We have changed the design of the RDH open/close lever.

3.Description: We have added ridges to the RDH open/close lever.

4.Action: From the first unit of August, 1996 production.

2/3